Liczymy pasujące modele…
I'm excited to introduce you to the Flexetki . A fidget and skill toy that takes advantage of 3D printing and gives you a fully functional skill toy with no assembly or post processing . Just print, take it off the build plate and you're…
I'm excited to introduce you to the Flexetki . A fidget and skill toy that takes advantage of 3D printing and gives you a fully functional skill toy with no assembly or post processing . Just print, take it off the build plate and you're…
Hey all! If you're here, you probably want a cool mounting solution for your JetKVM into a 1U rackmount form factor. You're in luck! Below I've outlined options for both fully 3D-printed solutions, as well as hybrid solutions utilizing…
A 10-inch rack mount for the JetKVM. I made this model in 3 variants. For 1, 2 or 3 JetKVMs. Each variant also has versions with keystone slots. A huge shout-out to JaredC01 for the original mount, which I used as a base for mine. His…
Я рад поделиться этим хобби с сообществом мастеров и, возможно, познакомить некоторых из вас с миром игрушек, развивающих навыки.
Russian Flexetki Skill Toy and antistress Can print 100% size this 159mm ore change size
Made a visually attractive EDC knife holder for the collector. Uses a one standard 608 skateboard bearing (available for about $0.50 from Amazon). Model also includes 2 “foot” options. One that has a cavity where the print can be paused…
Remix with minor fixes to NewProggie's JetKVM mount with 8 keystone modules.
Introducing the FidgetKey! Relieve your stress with this contraption that mimics a mechanical keyboard key! Using a small, built-in spring, this is fully print-in-place and has an interchangeable keycap for custom options! Rook Keycap by…
Magnet from: silnemagnety.cz aliexpres
I created a fridge magnet for my two-year-old daughter. Due to the variety of magnets, add the place on the magnet yourself as a negative volume. Insert it into the body about 0.5 mm above the first layer so that the child does not…
A modular, 2-part, 19-inch rack mount for the JetKVM. I made this model in 2 variants. For 2, 3 or 4 JetKVMs per module. The 2 and 3 KVM variants also has versions with keystone slots. This mount is part of a 19-inch modular rack mount…
I did some quick modelling while waiting for the JetKVM Kickstarter campaign to end. Using their provided JetKVM 3D Model , I designed this under desk mount that might come useful for someone using their JetKVM at their workstation for…
I enjoyed the Flexetki skill-toy in it's original variation, but the hard edges hurt my hands during use. The edges on this remix are chamfered (in a fairly rudimentary way, sorry) to improve comfort. To reduce weight, I provided 3…
Hp prodesk 10" panel rework to add a JetKVM next to it. I really wanted to fit the screen flat. because why have it at a angle? The JetKVM is to be disambled to fit, but the screws from the case can be reused in this print. the screen…
Zapich na tortu s textom “Vsetko najlepsie” vytlaceny z materialu PLA.
Remix of JaredC01 original JetKVM mount with 8 additional keystone modules suitable for a 10 inch rack
Link to the Fusion file: https://a360.co/40vNwG4 Inserts are ruthex m3s, if you have insert that dont fit the holes, text me and i change it. Instructions for assembly over on Jareds post Slots are for velcro cable ties
Pool Skimmer Magnetkupplung Bestwaypool für ein Leichtes tauschen zwischen Skimmer und Poolbodensauger. Um nicht immer den Poolschlauch umständlich von dem Skimmeranschluss bei unserm Pool zu demontieren. Ist diese Magnetkupplung…
JetKVM 1U Rackmount Remix for 10" Racks – Built for EZCOO KVM Integration Meet the JetKVM-KVM — a clean, compact solution for managing up to four systems with a single JetKVM and a KVM switch. Designed to fit 10" racks, this custom 1U…
fantasy Belgian ‘frietkot’, designed for the H0 train module of 'De Pijl' 2024 You can read more about this project at : https://www.de-pijl.be/banen/het-frietkot/ scale 1:87 for H0 I opted for the shorter version of the add-on in the one…
Simple replacement part, when someone lost this part or when it broke.
A 10-inch rack mount for one Raspberry Pi and one JetKVM devices. Compatible with RPi 3B, 4B and 5B. This Model is a Remix of @Mauker's 10 inch rack series. You can check out the others here . Required parts RaspberryPi 4x M2.5 thread…
UPDATE: I created another version without the specific cutouts for the ports on the back. I suggest using this model because of the tight fitting of the HDMI port. I also made the feet for the magnets bigger to fit 10x3 mm magnets for…
Idea I wanted a box to store the JetKVM device, along with the cables you get in the box and maybe a few more (adapter for Micro HDMI, RJ12 cable etc). Design In the center there is a place to put the device. The space on the outside is…
What is JetKVM? https://www.kickstarter.com/projects/jetkvm/jetkvm?ref=5sxcqi What is this? Mount JetKVM on 1U server rack with M2 screw. What are the features? Designed for JetKVM Original screw holes It can be installed either to the…
Cleaned up the model a bit by adding slotted holes and rounded corners to match the look of my other mini rack parts.
Myslel jsem i na naše bratia. Všetko najlepšie pro vás. Ideál PLA, ale to určo víte.
Modified to fit neatly with other mini rack devices at a standard 2U height.
rozširenie rc auta Toyota LandCruiser 79 (rc car 1/12)
Printed on a Prusa mk3S+ with the bottom of the shelf on the bed to reduce supports. Getting it to fit is fun, I had to reduce the skirt to 3mm to get it to fit. Printed in Prusa PETG Black with - 4 perimeters - 30% gyroid infill I was…
Made it slightly more sturdy than the original and slightly increased the grip. Prints without support
A beautiful minimalist painting of a Ferret on the wall or with a stand on the table. Size 201 x 193 mm You can find the small print stand for the table on my profile ↓ https://www.printables.com/model/759271-small-wall-decoration-stand…
Since I'm going to be using the JetKVM for small form-factor computers but still want to use the ATX card for control i whipped this model up. Now just to wait for the firmware for the ATX card :) Holes should work for “hot melt” nuts!
Набор для установки облегченной каретки от Егора Харченко сообщество EPD на Ender 3 S1 Есть 3 варианта для установки: Для стокового крепления мотора оси Y - на каретку необходимо распечатать экстендер (размер печатного поля сократится) -…
Der Original-Haltegriff des Dr. Oetker-Backblechs war kaputt, daher habe ich einen neuen konsruiert, funktioniert prima. PLA, 100% Füllung
This is a simple storage system for Revell cans with paint. Every floor is for 30 cans of paint. I use settings for saving a lot of material and printing time - 0 top/bottom layers (only infill). This settings saves cca 60% of your…
A 6-inch rack mount for the JetKVM! Add remote management to your tiny lab with this marvelous KVM! There are two alternative versions with one or two keystone module slots. This model is part of a series of 6-inch rack mounts I've…
S small remix of a ferret model used as a nightlamp
Inspired by https://www.printables.com/model/1105303-jetkvm-1u-rackmount but requires less space. This is a rackmount panel for a single JetKVM Printed in PLA on and Ender 3v2 You may need supports depending on how well your printer does…
If you lost your whole clip, you can replace it with this one. Dr. Oetker 1123 Rechteck-Springform mit Haube 38 x 25 cm
Choose from more than 70 models of magnets with letters, numbers and other symbols and print original magnetic inscriptions for yourself and your loved ones. Suitable as a Valentine's gift for your sweetheart, it is also guaranteed to…
Statuetka dla nauczyciela- sowa. Napis- dziękujemy.
я добавил новую оболочку что бы пластик не был скользким печать 0.3 сопло высота слоя 0.12 100% заполнение для веса для моего старого принтера TWO Tress bluer ушло 2 час
Allows you to mount a JetKVM onto a DIN rail. The JetKVM is dropped into it and stays in place. No supports needed to print it, if you put it upside down. Requirements: This bracket uses one Voron DIN rail clip from:…
The JetKVM just stays in place with friction. Category: Computer
A 10 inch rack mount for a Beelink mini pc and a jet KVM. I've oriented the 3MF and supported it where necessary to allow for IO.
This is a pocketknife that fits together easily, using pins. The pins may require a tiny bit of sanding for them to fit. Sorry to anyone who tried to print the previous, malfunctioning version of this.
rakietka(paletka) do tenisa stołowego
Hierbei handelt es sich um einen Remix des Models von rtarbutton (dickes Dankeschön ;-) ) mit dem Namen “ LTT Magnetic Cable Arches ”. Die Gründe des Remixes waren Die Konfigurierbarkeit der Magnetkraft durch den Einsatz verschiedener…
Tento model bol navrhnutý s cieľom vytvoriť jednoduché a funkčné úložisko pre holiaci strojček Gillette Blue3 . Držiak zabezpečuje, že žiletka po použití správne vyschne, čím sa predlžuje jej životnosť a udržiava sa hygiena v kúpeľni.…
This is a bracket for the jetKVM, I needed a bracket to screw the KVM to a wooden panel from behind. The KVM can be inserted from the front. There is a 0.2mm gap all around. With two Postit's on top of each other I was able to create the…
Non-Commercial | Unique Model This 3D model represents Saint Petka (Saint Paraskeva of the Balkans) , a highly venerated Orthodox Christian saint, especially revered in Southeast Europe. The statue follows traditional iconographic…
Combining from the modular rack and jetKVM Slide Mount to create this tray mount for the modular rack. Slides with a little bit of play but doesn't move unless bothered. If you think you will be accessing it from the back on a regular…
I did some quick modelling while waiting for the JetKVM Kickstarter campaign to end. Using their provided JetKVM 3D Model , I designed this 1W little sled that will hopefully fit the real thing. It is compatible with MartinRowan's…
A storage tray for the ever popular Honeycomb Storage Wall system. This is now new and improved. MK2 bins and dividers include these enhancements: Thicker rear wall and deeper coutnersink to accommodate more common 5mm fasteners, full…
Skrócona Instrukcja BHP Myśl - Znak Plakietka Tabliczka Powered by MakerWorld-Make My Sign (https://makerworld.com/makerlab/makeMySign)
Transport case for JetKVM clipping by 8x Ø6mm x 3mm magnets Dimensions: Closed-Case: 36mm x 85mm x 108mm Bottom: 26mm x 85mm x 108mm Top: 10mm x 85mm x 108mm Warrenty Disclaimer: I'm not responsible for damages at JetKVM if transported in…
This should bolt to any of these modular https://www.printables.com/@stijn_18303 other 1u half panels, but hold a JetKVM
10inch rack for 10 inch Rosewill RSV-SATA-Cage-34 + JetKVM Rack (https://a.co/d/37Nv8Fi) with accomodations for 2 jet kvm's. Built for my personal homelab build. print with atleast petg, with front facia on build plate.
Basic pocketknife display/holder that can be mounted to IKEA SKADIS wallboard using the integrated hooks. Prints easily but will need supports for the upper hooks. Organic supports work great for this. The example is printed in Prusa…
Zápich na tortu k 70ke. Rozmery 175x150x7.5 (mm)
Computer bay mount for JetKVM. Fits into a double-height 5.25" bay. The JetKVM itself is now flush(ish), so it doesn't stick out so much. Additional parts: JetKVM & ATX Power Control https://jetkvm.com/ Mounting bolts for the JetKVM: 2x…
Needed to mount my JetKVM on the wall and really liked this DIN rail mount. I don't have any DIN rail setup so I moved the screw holes and made them slightly larger for drywall screws. The screws I used were still a bit too big but it…
There are two keystone jacks above the JetKVM that I have connected to the hdmi and usb (data only, I am powering the JetKVM on a separate usb port) on the back of the JetKVM. This way I just use a short usb/hdmi patch cable to connect to…
A modular, 2-part, 2U 19-inch rack mount for the JetKVM. I made this model in 2 variants. One with keystone slots and another without them. Ranging from 3 JetKVMs up to 8 JetKVMs per module. This mount is part of a 19-inch modular rack…
Description I designed this for a specific need, but wanted to share for other home labbers! This stand is designed to use minimal width and can hold 3x JetKVMs vertically (all pressure fit, no hardware need). It stands fine by itself,…
I really like the ESRack system by @EvilProphet , but it lacked JetKVM module, so I created one similar to JetKVM mount by @JaredC01 Print on front face without supports. To secure the device, you'll need 2x M2x16 screws. This is of one…
I designed this holder for my old Swiss Army Knife. My knife is no longer built and sold like this. I suspect that it is a Victorinox of the “Ranger” type. At least the dimensions of the Ranger fit quite well. All pocket knives with a…
Plakietka na pojemnik na koperty na wesele z napisem “ Dziękujemy” Materiał: Baza -Białe PLA, Litery: Fiberlogy Tru Gold PLA Wysokość warstwy: 0,15 lub niższa Plaque for wedding box with sign “Dziękujemy”(Thank you) Material: Plaque:…
Fridge organizer for Dr Oetker packages
Hrošík magnetka (Hippo magnet) Velikost magnetu: 10 x 2mm Varianta s vložením magnetu (pauza) a s lepením magnetu (až po tisku) 4 barvy filamentu – světle šedá, růžová, bílá, černá Velikost vrstvy 0,2 – nastavení vložení magnetu a výměny…
Bracelet (for PLA, PETG, TPU & more), different sizes, inner diameter - from 50mm to 80mm, height 5mm (can be changed), ---------------------------------------------------------- Bransoletka (dla PLA, PETG, TPU i innych) różne rozmiary,…
I wanted to test the fit of the remixed model and liked the look, so I'm keeping it until I figure out how I want to mount
Remix of the HP EliteDesk G3 mount's left side blank to include a mount for a JetKVM and (6) Keystone Slots. Printed face-down, 0.2-0.25mm Layer, 3x Perimeters, 15% Adaptive Cubic infill, PETG
Desk platform for a Minisforum UM790 Pro mini PC with a JetKVM mount built in to help you organize your desk. The platform has divers that the UM790s rubber feet sit in securely, and a JetKVM holder to the right of the PC. On the bottom…
Remix of the original in PrusaSlicer. Added wall screw holes in center, and cut of some of the sides.
Witam ,, zaprojektowałem kasetkę na monety zamykaną na magnesy fi5x3mm. kasetka na monety , zamykana na magnesy.
rozetka, osłona klamki wewnętrznej
rozetka, osłona klamki wewnętrznej
Doesn't require supports. Uses same M2 screws as original model.
Vytvoril som závesný týždenný zásobník na tabletky. Popis je v slovenčine, ak by bol záujem urobím popis aj v angličtine. I created a hanging weekly pill holder. The description is in Slovak, if there is interest I will make a description…
.stl - PLA, PETG, TPU and more .3mf for PLA
V modely sa nachádzajú dve dutiny, do ktorých je potrebné v procese tlače vložiť magnety priemeru 8mm a hrúbky 3mm.
This remix has a reduced the profile (X Axis) so it has a slimmer/narrower profile , it will fit into tighter spots, and corners. I have moved the mount holes to centre of the model, using 3.5x25 screws . And the bracket is good for a…
Russian Flip Beads – Dice Edition 🎲 A unique dice-inspired version of traditional Russian flip beads, also known as Chetki . This model features 8 sections: 2 large end pieces with engraved dice patterns and 6 smaller middle segments .…
Mount your JetKVM's high up on your multiboard with this peg mounted JetKVM Holder. I have included a 3mf that hopefully has the supports but I found the best way to print this is with the back face on the bed (the back face being the one…
I took the 19-inch blank and merged the Jetkvm 1u rackmount model into it. I need this so I could fill the space in with my unifi 16 port switch on the other side.
Model wynikający z potrzeby.. otóż zabrakło mi rozetki na kranie ściennym i powstał taki pomysł. Może komuś się przyda :)
záslepka loketní opěrky octavie1
Simple holster for the Victorinox or similar pocketknife. Fits the standard model pocketknife.
This modular rack mount has keystone slots for HDMI, USB-C and PoE modules. It fits to @mauker modular rack system. I used HDMI and USB-C keystones, as well as inexpensive PoE modules with USB-C power output. The PoE modules are secured…
This is a simple 1U mount for a 19" rack, a ThinkCentre M720q and similar models, a JetKVM, two Ethernet plugs and four Compute Blades with rear fan. The system is held together by two M6*50 screws with matching nuts and a reinforcement…
PetKit Odor Eliminator Diffuser bracket/mount for inside the PetKit Automatic Litter Box
JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option which i used before and be able to replace my empty right side. There are more options out there to combine it to. Use 2 M3 inserts and 2 M3 screws to…
Skręcałem śrubą, ale jeśli wymyślę coś innego, to wstawię. Nie mam zdjęć zaraz po wydruku, tylko w trakcie obróbki. Całość wydrukowana z ABS-u, a rączka wygładzana acetonem.
Statuetka "Dziękujemy wychowawcy"
I needed a rack mount solution for my jtz map02 mini pc so I came up with this. I used the JetKVM mount from JaredC01 but the rest was done by this redneck... so please be nice. Feel free to remix this and see what else it can be used with.
Russian Flip Beads (Chetki) – 8-Piece Design Introducing a modern 3D-printable version of traditional Russian flip beads, also known as Chetki . Designed for smooth flipping movements, these beads are a simple and enjoyable fidget…
![Flexetki Skill-Toy (Chamfered, 3 sizes) [Remix]](https://media.printables.com/media/prints/656259/images/5172316_79412357-1e81-4c10-812f-da7353f07760_83b65451-8e49-4237-b758-abec8cc90197/img_2225.jpg)
