Liczymy pasujące modele…
Use the Ball Buddy to customize your golf ball. For SLA or FDM single filament printers this model has two versions of the magnetic golf ball stencil holder (exposed and covered magnets). Both versions made up of two ball holder halves…
You'll be able to replace your original print head housing with this exposed print head setup using only the original screws. SETTINGS: Slice the model upside-down (see photo) with a tree structure support in a zig zag pattern only…
wifi boad no sd card and no exposed Wi-Fi chip
For the conscientious golfer who likes to fix their ball marks made due to hard impacts with the green surface by their ball so that other players can also enjoy a smooth green surface. Usage Divot repair tool - Ergonomic design with…
Remixed base block from this https://www.printables.com/model/479716-ps5-dualsense-controller-phone-mount
I designed this because I wanted to rack-mount my Mac mini with the I/O accessible from the front, and I couldn’t find anything that actually fit my needs. The design is intentionally simple, but it does the job well. The front panel is…
Here's a remix of the waving octopus model with an exposed brain. Change the filament after the layer at 45mm to have a different colour for the brain as pictured.
Raspberry Pi5 case with the cpu cooler fully exposed
Exposed the magnets so they can be inserted after printing.
Modified the original by flipping the top half so the port can now be open without taking the SSD from the case.
This is an alternative case for the TeensyROM cartridge for the Commodore 64. It's designed to be easy to print (no supports), leaving some of the cartridge's larger components “exposed” through cutouts in the case. Significant…
I recommend to use the *.3mf File to get a very lightweight knive (~10 g including blade). This is a quick and dirty remix done using the STLs and the cut tool of prusa slicer. Two of the pictures show the model with less exposed blade…
This is a bit of a do-it-yourself project to print a hummingbird silhouette with interesting infill. The basic idea is to print the interior with no top or bottom layers to expose the infill. When you first import the STL, it will look…
Remix with gaps for all ports and a mirrored mounting plate option. See original model https://www.printables.com/model/705053-mountable-esp32-screen-cyd-case-with-pen-holder for instructions. All credit to @Sijeveenstra_996957 for the…
Use 4xM3*4 heat inserts and 4xM3*8 counter sink screws for assemble. Freecad design file included incase you need to make your own change. Updated: V2 version extended the edge by 1.5 mm so that TF card can be protected by the case.You…
This an exposed head for the dummy 13, it has a skull, spine, tounge, and teeth
Wanted small(est) AirTag enclosure that doesn't expose it. You can add your logo or text on the enclosure (best to put it on bottom, so it will keep stable orientation regardless how hard you close the top cap). Fusion source file is…
Remix of lightninglord88 fan duct ( https://www.thingiverse.com/thing:4816138 ) with the part than covers the manual feed gear removed (crudely) in maya. STL export broken for me so its an OBJ but should import fine. Cura was fusing the…
Please click ❤LIKE❤ if you appreciate my work 😊 Flexi Demon Hand – Articulated Skeleton Hand with Exposed Bone A creepy flexi demon hand with articulated fingers, skeletal details and a distinctive exposed bone extending from the wrist.…
Please see the announcement Video where I "improve" 5 different 3D-printable designs: https://youtu.be/en_qw3RvsaI After having a lot of success with my Chainmail wallets, I decided to update the link design ever so slightly and make it…
Dummy 13 skull head with brain exposed
Variant of the snap lid case for the "Smallest possible ESP32-CAM" to be able to use the GPIO headers.
I made John S' case for my S22 but my wife liked it, but she had an S22+ after some trial and error I resized and repositioned the button sections to fit her Phone… I posted the base file but the photo is one I cut out her nickname on the…
Dummy 13 Skull Head with Exposed Brain resized 200%
Adjusted the right side to mirror the left cutout in order to expose the 5v and GND rails on the Octopus. This allows you to run a DuPont connector where previously it was blocked by the original midpiece design.
This cool pencil holder can be printed in any material! in the premade G-Code there is color change included like it can be seen in the pictures, and don't worry, you don't need any MMU to do the color change, simply switch the filament…
This is a case for the BTT PI 1.2 with the DC input exposed in case you need to power with the printer's psu.
Dummy 13 Skull Head with Exposed Brain resized 250%
This locking battery mount for the Ryobi ONE+ 18v battery allows you to add easily swappable power to all your projects. The model has two holes (center distance = 1.25") for mounting, and a 0.125" chamfer at the base of a 1.209" wide,…
I just sliced a part away so you can connect to the GPIO contacts...it's the same as this one https://www.thingiverse.com/thing:2334119 The USB cable in the picture is connected to the printer, I needed the GPIO ports for…
This is a simple case for a Wavgat branch D1-Mini. I could not find one that fit this specific board with the pins exposed so I created this.
CraVeg's Case for the Fish8840 or other RipOff Component Testers but with exposed SMD testpads Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No Resolution: 0.3 Infill: 40% Category: Electronics
If you're looking for a mounting option for your SanDisk Extreme Portable SSD (SDSSDE61-xT00), this might be what you're looking for! Intended for use with a standard 1/4" x 1/2" wood screw (about 6.3mm x 12.4mm) you can get at any…
After watching this YouTube video by Jeff Geerling . I printed and built the Air Gradient. In Jeff's video, he mentioned that temp sensor might give higher readings because of it's locations in the case. I noticed what I believe to be…
This is a pretty simple build. You may need to enable “Print Thin Walls” or whatever the appropriate setting is in your slicer.
Very simple protective cap for exposed M10 screw.
Based on https://www.thingiverse.com/thing:1874648 but fully rebuilt (because of model artifacts I could not get rid of as easily as rebuilding) This 40-pin GPIO cover is based on the dimensions of the source thing. The remix is: 4 pins…
Add visceral horror to your collection with this Half-Skeleton Zombie Bust , a striking undead display model sculpted with unsettling anatomical detail. This terrifying figure features an exposed ribcage, skeletal facial structure, and…
Case for the TeensyROM+ multi-function C64 cartridge by Travis/SensoriumEmbedded. Holy Paperclips Batman! Updated by request: Case tops now include paperclip hole access to programming button. No more taking the cover off for USB firmware…
I really like the remix by Forrestbond on thingiverse however it was annoying me that my finger contacts the edge of the case when a button is pressed. To fix this I recessed the material by side the buttons in by ~4mm allowing the users…
HW-408 Amplifier ventilation case with exposed outputs and potenciometers Shortly the case for a HW408 class-D amplifier
If you've got a favorite infill pattern that you love the look of, this design will let you show it off :) Print this design with no top/bottom layers, three perimeters (suggested) and your favorite infill pattern/percentage. Takes the…
Bring some undead character to your Halloween collection with this expressive zombie head. An open skull reveals a brain with exaggerated folds, while bulging eyes, sunken cheeks, and crooked teeth give the face a creepy cartoon…
This is designed to be fitted over 1 3/4 inch PVC and the exposed magazine. The slots take 1/8" by 3/4" aluminum fat bars. The holes that fasten the bars are designed to take M3 screws, but can be bored out to take larger screws.…
I went on a ski trip and decided I wanted to make an industrial looking frame for my projection screen. It's inspired by the ski map brackets in Vail. They're not strong on their own but they did hold my 3.5 inch trim boards together…
A simple Pwnagotchi case designed for setups without a battery pack. The HDMI port remains fully exposed for easier setup, debugging, and external display access. What I used: Raspberry Pi zero WH Waveshare 2.13 Zoll E-Paper HAT+…
First off; I'm new to this, so this is far from perfect, but it fits my needs, it might fit yours :) After printing the Pi sleeve (by tobbi007, the first remix he did years ago https://www.thingiverse.com/thing:2889371) I found three…
I printed the nice design from SunShine, and it turned out great, but I wanted to hide the magnets without stopping the printer. Additionally, I had magnets with a diameter of 6mm but different thicknesses. So I printed these discs to…
Stick labels from your label printer, stickers or whatever you like on this and have a cool and strong magnet! STL files have space for 8 tiny neodymium magnets (2 stacked per corner), making the finished product super strong. But due to…
Just a simple design I made some weeks ago for my IKEA doors in my studio
Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
This two-piece ornament is designed with exposed infill to create a unique artistic effect. Each piece is about 1/8" thick, making it suitable for mailing. To achieve the transparent infill look, I used these settings: Walls: 5, Infill:…
Exposed NVMe Frame V2 // Full Hex-Flow Edition (JMS583 + 2260) This is a V2 Remix of the Exposed NVMe Frame . What’s New in V2? Dual-Sided Ventilation: I have added a matching hexagonal mesh pattern to the bottom floor of the frame.…
Overview Three friction-fit front covers for the Xiegu G7250 detachable control head. Screen Only protects the 7-inch touchscreen and speaker grille and leaves every control usable. Full Face closes over the entire front, knobs included.…
Exposed NVMe Frame // JMS583 + 2260 Edition A high-performance, minimalist enclosure designed for the JMS583 bridge controller and M.2 2260 SSDs . This design ditches the bulky "black box" look for a sleek, PCB-hugging frame that…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
Add visceral horror to your collection with this Half-Skeleton Zombie Bust , a striking undead display model sculpted with unsettling anatomical detail. This terrifying figure features an exposed ribcage, skeletal facial structure, and…
Exposed NVMe Frame // JMS583 + 2260 Edition A high-performance, minimalist enclosure designed for the JMS583 bridge controller and M.2 2260 SSDs . This design ditches the bulky "black box" look for a sleek, PCB-hugging frame that…
Use the Ball Buddy to customize your golf ball. For SLA or FDM single filament printers this model has two versions of the magnetic golf ball stencil holder (exposed and covered magnets). Both versions made up of two ball holder halves…
Use 4xM3*4 heat inserts and 4xM3*8 counter sink screws for assemble. Freecad design file included incase you need to make your own change. Updated: V2 version extended the edge by 1.5 mm so that TF card can be protected by the case.You…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
printed this as high as the printer allowed; my settings were PLA .4 mm nozzle one layer raft for solid base gyroid infill slimtree support ignore small overhangs support critical regions only. all of the supports inside the skull are…
![Magnetic Badge (embedded or exposed magnets) [OpenSCAD]](https://media.printables.com/media/prints/dd50e7dc-e2af-48c7-a2ac-5ee0994fb470/images/12692312_d65b284b-03e9-4da8-9f71-6e75911bb480_ec199194-ad44-4720-b824-8d98567f3313/badge.png){kind=icon}
