Liczymy pasujące modele…
Update 2022-07-19: There's now a generic version of the vent adapter which attaches using zip ties, and two different nozzles (45 degrees and 60 degrees). This is an adapter system that clips on to the rear centre console vent and…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Front cover with no hole
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Big Einsy case is an awesome concept. This remix addresses the issue of being able to easily access the frame fixing screws, especially after assembly. A channel against the frame has been opened up to route a +5V power cable up to a…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When changing to a Mean Well NES-350-24 power supply, I realized that the plug socket and switch housing was not going to fit nicely due to the orientation of the screw contact terminals on this power suply. This cover gives more space…
Wydruk około 6,63 €–8,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This keyboard backplate fits the original T-Deck Plus case. You will need to extend the cable coming out of the speaker, you can then route it through the same hole as the flex cable for the keyboard. For holding the keyboard in place I'm…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A front facing owl that has a removable head and a small storage space inside. This design is short enough to print on a Monoprice Mini Delta Printer which has a really small print area. Based on "owl facing front" by BrOncO on February…
Note: This spool holder is designed to work with a re-sited Filament Sensor Bracket such as Ender-3 V3 Z-Axis Filament Sensor Bracket or Ender-3 V3 Top Filament Sensor Bracket . Note: This will not fit the Plus model as its frame is…
Note: This spool holder is designed to bypass the Filament Sensor - for a spool holder that supports a re-siting of the Filament Sensor see Ender-3 V3 Top Spool Holder (Rear Facing) . What is it with Creality and their unpopular spool…
Flipped Buhler's print in the X axis so the final product has the nice texture of the print bed facing the viewer rather than the topmost layer of the print (which always has nozzle scratches). Also scaled to 125% then rotated to still…
Here is a parametric magazine holder model. This will let you create magazine holders that match your specific needs and have a unified presentation. Remixes/makes are encouraged, but please post the settings you used for the parameters…
Use this double spool holder to place two forward facing filament spools on your Sovol SV06 or SV06 Plus! Using the original Sovol SV06 filament barrel nut , I created a longer double-ended nut combined with a new base to create this dual…
Updates Decided to add the Updates at the top, so they are easiest to find for users that have already printed them, and are coming back for these. First of all, thanks everyone for the overwhelming support so far! A lot of you have…
I decided to make a simple remix of the original Ulvheim A1 building base to complement PhysUdo's Ulvheim Building Demonic Ritual (upper floor): https://www.thingiverse.com/thing:3321919 I wanted to make the building with the pentagram…
This is a custom-designed sanding cup for bowling ball resurfacing and polishing . It holds a 125mm (5") round sanding pad using hook & loop (Velcro) stickers , keeping the pad firmly in place during use. On the backside, the cup is…
This mount enables hanging the Dyson V8 in a vertical orientation with the dust bucket against the wall and the ‘pretty’ side of the vacuum facing out. The mount is all one piece attached to walls with 4 counter-sunk screws. There's no…
I'm doing the metal dash conversion on my 74 Standard Beetle. I don't want to weld the passenger facing vents shut so I opted to make some plastic vents instead. These just glue into place on the dash. I used a dab of super glue but I'm…
The sound of the Amazon Fire TV Cube is the weakest of any of the Alexa-enabled Amazon products. I suspect it's because the Cube is designed to have the power of the connected TV and/or AV home theater system at it's disposal for playing…
This is a remix of QuadView's excellent Glock mag holder. I'm uploading an example G43X model, but the idea is to let you modify the fusion file to suit your own needs. Feel free to remix or post a make with the parameters you used to…
Just a remix of this awesome swivel guide because I'm sitting my filament reel on a shelf behind the printer. Unfortunately this version needs supports due to the nature of the design but only a tiny one on the extrusion tab. Print…
Downward facing PTFE fitting adapter for your MMU2 spool holders. Ideal for use with spools placed above the printer. Reduces friction and allows clean PTFE wiring. The adapter is designed for a pneumatic M5 knock-off connection. But a…
A cool front facing dragon bookmark, quick print, maybe add more top/bottom layers to increase strength.
This model is compatible with the lego system.
I'd been using this riser for months but recently I've maxed out my build height. I found the cable was rubbing against the light bar. I reoriented the original to bring the cable in front of the frame thus stopping the cable from rubbing…
A mount for the Amazon Blink Doorbell that makes the doorbell face downwards and also either left or right (depending on if you use the mirrored or non-mirrored version). Allows you to mount the doorbell slightly higher to have more…
I really liked JSund's camera mount for the MK3S but wanted my camera mounted in the front, after some trial and error in Blender I was able to adjust the height and length to what I wanted to be in front but still clear the build plate…
This model is compatible with the lego system.
Modified the side upper body so a logo can be glued, CAT logo in this case. Front LEDs are facing forward as i love how bright and how they look this way and made the housing rounded. TIP: first insert the wire for the motors through the…
A remix to get longer tools of Kärcher VC7 to face down In holes I've used M3x30 bolts, 3 of them might be an overkill but hey, it holds ;)
Downward-facing stand for the Edifier R1280DB bookshelf speakers. The front bracket just fits between the speaker housing and the cover. — I would be very happy if you have as much fun with the things as I do. — If you like :-) Thank you…
This is a mod for the G1 and G2 rails of the Prusa Drybox so you can see the hygrometer if the box sits higher.
If your P1P/P1S is on a high shelf, the display will be perfectly readable.
My Flashforge AD5X setup called for a front facing IFS mount to be inline with my dryer box. Nothing was quite matching what I needed, so I designed one in tinkercad. Once installed, it was clear that the IFS cable needed to shift to…
WARNING: Improper use of this tool can result in damage to your engine block. Don't use it if you don't fully understand what you're doing! NOTE: when printing, increase Infill to 25% – all other default settings should be fine. Affix…
Wall mount for talon mag accepting Nerf blaster. Left or Right facing options. Modeled in TinkerCAD. Hexagon relief to save on filament and time. Hexagons because “Hexagons are the bestagons” - CGP Grey
Wall mount for Drill, both left and right facing version. Tested with Ryobi One+ 18V drill, and Black and Decker 14.4V drill. Should fit most drills of similar size. Mount with two screws, 5mm screw hole, 3mm countersink. Minimum 4 walls…
I uploaded two versions that I use as facings. One of them is a ramp, which facilitates rolling onto your Runnen floor tiles. I also included the male and female joints as blanks, so you can use them in your preferred CAD program to…
Update, made to printable without support! Remix X1/X1C improved spool holder to side facing. Srew holes are made to fit the srews for X1 i got with the P1P upgrade. I recommend adding support to the bottom of the cylinder. This region…
A desiccant box designed to sit securely inside the base of the drybox, allowing for filament to be fed through a downward-facing port. Keeps desiccant in place while allowing airflow and easy access. Base-Container_with_Hole.stl Print…
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page. Attack on Titan is one of my favorite anime. I liked it more when it…
Attractive YOGA sculpture consisting of two parts. Printing information Layer height: 0.20mm Infill: 10% Support: none Color change in the ring at 5.60mm. I am looking forward to your Makes! :-) If you like this model, feel free to check…
Just a quick remix that puts the rack mount on the other side, and makes the ports rear facing.
This is my remix of RedKB's front mount for the C920. I had previously been using the Pi camera with Sneaks articulating mount and really liked it. When I upgraded to the C920 I didn't like the big bulky mount so I used Nat's mount to…
Front Facing Baby Chick Emoji Keychain Print Settings Printer: Geeetech Prusa I3 pro B Rafts: No Supports: No Resolution: 0.2 Filament: Standard 1.75mm PLA PLA Category: Keychains
The Park Tool DT-5.2 disk brake mount facing tool comes in a nice plastic box, with cutouts in the foam insert for all the major parts. Unfortunately, the standoffs and center pin needed for working with flat mount (road style) disc…
Space is crucial inside a Lack Cabinet. So is the routing of the heater cable which is attached to the bed. To minimize the space the Cable needs during bed movement, the filament which is guiding the cable is pointed downward. This leads…
I rotated the position of the female USB connector such that it is pointing forward rather than to the right. It uses the same 8" USB extender linked on Amazon.com . I didn't have color matching filament so the item pictured is plain…
Wanted a toolbox that faced forward. Was a little concerned the two corner screws weren't going to hold it, but they are plenty rigid. The holes are countersunk, but I only had barrel headed hex screws (M3x12) that worked fine too. I was…
Printed on Prusa Mini, Prusament PETG using 0.15mm Quality profile, 50% infill, no supports.
This version of the spool holder is with a downward facing rectagular hole for a humidity sensor. Drybox is designed to be placed on the right side of the enclosure or on a high shelf so you can still read the values from the humidity…
Rear facing shots at water level whilst windsurfing give awesome shots both of the high speed wake and your mates chasing you. This simple mount connects to the rear tuttle bolt. A piece of 3mm x 10mm Aluminium bar is the reinforcement…
If you only need sonar imaging of what's in front of the ROV and wish to remove the sonar from a more exposed position above the ROV these are an option to mount on either electronics PODS.
This is a simple remix of a rear-facing PTFE filament guide for the Original PRUSA Enclosure that can be used with the MMU3 and other similar external solutions to handle your filament. NOTE : This model should be loaded into your slicer…
A dragon bookmark 30–40-minute print maybe add more top/bottom layers for strength, print with ironing for a better finish.
19mm ring mount for Laser and Lubetube for Revo 7. Maybe Revo 12 too, u have to try. Holes for strap included. This is slightly down facing to compensate for arrow drop.
Buddy3D mount for Prusa MK3/S/+, MK4. Difference from the original is that the base faces right instead of left.
This is a model I put together of my BHR hip implant. I made this using the listed sizes from my, very expensive, itemized bill. Along with overlaying some X-rays and reference photos to get the proportions right. I took a little liberty…
These clips are designed to fit around the bases of the miniatures from the Zone Threats box and feature a small wedge that fits into the facing notch. By default the diameter of the clip is 2.5% smaller than that of the intended base to…
Fixed the missing parts of the bottom layer compared to the original remix
Designed for the studio monitors that are standing on the desk stands. But because they stay behind the monitors, I needed to give a rise. But also required to face the monitors downwards, for sure. With the brackets on the sides and…
【What is】 This tool is an attachment for the RMU filament buffer, to load the filament from the front of the 3D printer. Designed to fit the MK3 series frame. 【Why】 In the Japanese living environment, it is difficult to install the MMU…
Esteps motor facing front side of printer with square hole for extruder.
I needed a spool holder that came out front of my voron as it on a shelf with not much space above it, and reaching behind or beside is a pain. I don't like PLA, etc going through the bowden tube, and the door has to sit open when…
Spoon - surfacing practice - 7/30/2024
Remixed front-facing Z end-stop from RC-3D for the Tevo Tarantula. The switch holder is exactly the same (included here for convenience). The remixed screw-holder has the following changes compared to the original: Uses two M3 20mm screws…
Colored Pencil Desktop Chest With 4, 6, or 10 Drawers for 84, 126, or 210 pencils Note: I have uploaded a new drawer design. It still fits in the same chest but I optimized the design to both substantially reduce filament usage and print…
Print Settings: (I use a Flashforge adverturer 3 pro) Main Body: 2hrs print Layer height: 0.18mm Print speed: 40 mm/s, travel speed: 70mm/s Shell count: 2 NO RAFT, NO SUPPORTS, brim is optional 15% infill Screw: 40 mins print Layer…
This simple mod makes it easier to adjust the heights of the Z limit switch when the printer is accessible just fron the front side (e.g. when it is stored in an enclosure). there are two parts to be printed, one needs to be mounted…
This is a remix of yiutoto's remix of snakeoil-xy's LED strip channel for 3030 extrusion modified for my use case to be angled down instead of up. Hole is sized for an M3 screw.
Remove one or both of your fans and install this CPAP fan duct that is rotated so the ducts face the front. Duct discharge nozzles and their placement are from Archetype Breakneck. For Medium and Long Meltzone Only (Does not accommodate…
This is a reworking of my previous LCD controller mounts ( v01 and v02 ) for the LACK style enclosure. A special thanks to @SteffJay_64880 for requesting this design. This version is fixed to the enclosure via two screws and the…
This jig allows you to hold the tube in position while its front face is made orthogonal to its axis. The upper clamp must be approached to the tube so as to keep it adherent to the V but with the possibility of making it advance and also…
I needed a front facing spool holder for a sprite se extruder on my Ender 2 pro. I reversed the spool holder stand and extended the roller a little bit and it did the trick. printed in petg with 20% infill on a Bambu P1S printer. Thanks…
Collection of cases that can be quickly put together to ‘hide’ the electronics so end users can focus on the usage of the electronic rather than looking at all the electronics. It includes a PICO case, and cases for a stepper motor, sound…
Top of gantry mount reel holder. If you don't currently have anything mounted you will need v slot nuts and screws. This is front facing and designed for a standard 1kg roll. I have tested this on a Longer LK5 Pro, Elegoo Neptune 4 Plus…
Print upside down with supports on build plate
I made this so that my cords wouldn't face toward me.
Privacy shield for rear facing camera
This is a modified spool holder arm for the Bambu Lab A1 , designed to mount facing down . A solid vertical column with a flared base anchors the arm, which extends horizontally to a cylindrical spool head. The head was widened to 42 mm…
This mount positions the sv08 stock filament sensor to feed it from the bottom. (e.g. Polydryer Box standing next to the printer) The sensor is mounted on the stock spool holder with the original hardware (screws & spacer). Supports are…
a quick design to mount my dial indicator to the back of the Ender's X carriage. Rear mounting because I run a bullseye and BLtouch in front which makes mounting an issue. I wanted something that was easy on and off. so it's using an old…
Description: I used the original plastic frame around the hinge (mounted to the trunk) as the base for this model and built the cover from that. It’s not perfect by any means, but it does the job — and honestly, it looks pretty good…
Minimal Vertical IKEA Skadis Mount for Netgear GS308E (v4) Switch Most mounting solutions for the Netgear GS308Ev4 I found were either incompatible with Skadis, in the wrong orientation, or required a lot of time and material to print. So…
Replacement plug for the rear-facing hole near the bottom bracket. This part must be printed in TPU.
Lathe centering tool with 1/2in / 12mm shank to mount in a QCTP holder - AXA or larger. This should go without saying: Print and use this tool at your own risk. If used incorrectly it can cause injury and/or damage to property. I am not…
This is a simple wall mount for a Type-2 cable. I was previously using one from pintables that I pushed up into the mount and it was held in place by a small clip, but over time in the warm weather the clip stopped holding the cable in…
The USB A ports have 28.5mm on-center mounting screw spacing. The USB-C port has 16.5mm or 20mm on-center spacing depending on the .STL chosen. The mounting holes are chamfered so you can use M3 or 6-32 flat head screws for a flush mount.…
Changed all of the camera dimensions to fit my camera perfectly as well as angled the camera down 7 degrees because of how high the camera had to be mounted on the back of a big truck so the operator could see the hitch more clearly and…
A full-body zebra, flat on the back, with a ring lug fused to the crest of its mane. Two colours printed in one job on an AMS or MMU machine — no glue, no paint, no assembly beyond a jump ring. 32.1 × 30.3 × 4.3 mm. Roughly 1.67 g of PLA…
A dragon bookmark 30–40-minute print maybe add more top/bottom layers for strength, print with ironing for a better finish.
A cool front facing dragon bookmark, quick print, maybe add more top/bottom layers to increase strength.
Buddy3D mount for Prusa MK3/S/+, MK4. Difference from the original is that the base faces right instead of left.
Note: This spool holder is designed to bypass the Filament Sensor - for a spool holder that supports a re-siting of the Filament Sensor see Ender-3 V3 Top Spool Holder (Rear Facing) . What is it with Creality and their unpopular spool…
Note: This spool holder is designed to work with a re-sited Filament Sensor Bracket such as Ender-3 V3 Z-Axis Filament Sensor Bracket or Ender-3 V3 Top Filament Sensor Bracket . Note: This will not fit the Plus model as its frame is…
Lacrosse balls typically last only 2-3 weeks with daily use. They get dirty, grimy, or “greasy” with regular play and are often discarded. The Ball Scratcher (v3) was born from my son's request to extend the life and usability of his…
