Liczymy pasujące modele…
Ive made a holder for iFixit Mako precision toolkit. You can screw it on the wall, so you can have your toolkit on a visible place.
Wydruk około 3,15 €–3,84 € nettoWstępna wycena jednego wariantu
I dropped my kit, and the revolving bit carrier part broke it's pivot on the top side. Modeled it and print turned out excellent.
Wydruk około 1,16 €–1,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This enables you to store your iFixit Essentials kit on your IKEA Skadis pegboard. V2.0: This is a new version, updated to use the supportless and easier to print Skadis Ultimount, just like DavidsGotWoods Mako Kit. Since it was requested…
Block is two block deep and 3 blocks wide. Printed with 10% infill and 0.4mm layer height with 0.6mm nozzle. Built on my easy to use template base: https://www.printables.com/model/286722-gridfinity-block-template-easy-to-use-for-fusion-3…
This little adapter fits snugly against the three flats of the iFixit precision screwdriver handles (Polymer and Aluminum Bit Drivers and Marlin Fixed-Blade). By providing extra wings, higher torque can be achieved for really stubborn…
A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility. Variants Full Toolkit: Fits the full toolkit with everything inside of the tool roll.…
NOTE: : Your lid might not fit right unless you modify it. It's not a problem for me because I keep mine in a drawer with the lid off. Also, this print has tight tolerances. Make sure your printer is calibrated. Be advised, I have an…
Overview: This is a 4x4 Gridfinity holder for an iFixit Essential Electronics Toolkit (item # IF145-348-5). I noticed most iFixit Gridfinity holders did not include a way to keep the original case stored, so I designed one. This is a very…
I am reorganizing my tools drawers with Gridfinity . Needed something to keep iFixit Manta kit from sliding around, so I designed one. Set case does not sit very tight in the insert as I am taking it with me every now an then. Also added…
A shallow tray to store your iFixit precision bit driver in prime position for instant grabification. Pictured is an older revision of the ⅓ height version. For Gridfinity by Zack Freedman .
6x5 gridfinity bin to hold the ifixit manta set (including the lid/top). This design allows for easy access to all the bits provided but also recessed enough to allow stacking. The weight of the bits holds it down so grabbing a single…
This model adds Peglock compatibility to the iFixit Pro Tech Toolkit holder originally designed by @toxvrd. Mount it by placing two Board Attachments on your pegboard with one empty hole between them. The attachment plates on the back of…
I made this as a challenge to myself so I could finally go through with modeling as well as trying to make more things for my Multiboard system. This is my second model that I've design from scratch with the exception of the snaps on the…
This uses the Lite Multipoint Rails and requires at least two Lite Multipoint connectors. I use these . Prints without supports using the typical Multiboard settings. Step and Fusion 360 files included.
Managed to break the original case for my iFixit Manta set, so I remixed the parametric rugged box to fit the foam insert of the screwdriver set and added ribs in the lid so you can sort screws and stuff there Had to modify the latch as…
Print Settings No supports required PLA, or anything similar v1.1 Decreases the tolerance between the stem and the shell. Increased wall thickness and shell for durability. Includes multiple versions with tighter and looser tolerances for…
Holder for iFixit Mako Kit for attachment to an Ikea Skadis pegboard. It uses special pegs designed by @KimJanosch. These can be found here: Skadis/ SKÅDIS universal peg
Bought an ES15S Electric Screwdriver that came with a selection of bits. I wanted a storage space for my the bits included in my iFixit Mako kit and the unique bits from the ES15S. The holder holds 72 bits, which is one more than needed…
Wanted to mount my screwdriver set to my wall, so I did. and now you can too :)
MultiBoard/MultiBuild holder for the iFixit Mako Precision Screwdriver set. It has 2 multibin rail slots in the back to allow for mounting. I personally am using 2 Flush Large Thread - Lite Fix Points , but any of the Lit Fix Points…
This is a custom Gridfinity module designed to hold the iFixit Pro Tech Toolkit in its original case! Built at a 3x5 footprint and twice the height of a standard Gridfinity module (10 units tall), this design provides a perfect snug fit…
This is a holder for two iFixit 4mm Precision Drivers, which will give you a 1u bin to securely store your drivers while still allowing them to be easily grabbed with one hand. I designed it to sit in front of the iFixit Manta driver kit,…
Wall holder for the iFixit Mako Precision Screwdriver set, using 3,5 mm screws. This design is a remix from iFixit Mako Screwdriver Mount for Ikea Skadis
I've taken Jerry's gridfinity holder for ES15+iFixit driver and some bits, and changed the base to not use magnets, as I prefer Clickfinity magnetless bases anyway. STEP file is also provided for anyone wishing to do further tinkering…
Background Information This model is a starter blender model of a basic doughnut, and is featured in both the Basic Modeling iFixit guide and Sculpting iFixit guide . If you are interested in learning the basics of Blender consider taking…
I had to redesign the model, because the magnet positions on my iFixit Mako case, are different. Additionally I opted for the Rail-Pop Ins, which I really like for their secure connection. If your magnets seem too weak you can stack two…
This is a holder for the iFixit Manta Precision Driver, which will give you a 1u bin to securely store your driver while still allowing it to be easily grabbed with one hand. I designed it to sit in front of the iFixit Manta driver kit,…
We build a lot of tiny robots! Specifically UK Antweight (150g) Combat robots, and these need tiny tools. Not just tiny, but easily portable and always on hand. That is the exact purpose of these mini tools and holder - fit where allen…
Keep your precision screwdrivers organized and easily accessible with this custom-designed screwdriver mount/holder, perfect for IKEA Skadis pegboards. Designed specifically to fit the iFixit screwdriver, it also accommodates other…
Wall mount for the older iFixit screwdriver and bits.
efvbdsgjfirqfjwgh dbsnpokhgtjq3o-winegaoj hi
Replacement top for the iFixit essentials kit. Designed to have 4 2x4mm cylindrical magnets glued in after printing. Great if you lose yours or if you just don't like that the original is beveled. Logo model included so that a…
A small organiser to keep two iFixit soldering iron tips together when not installed in the tool. Ensure the tips have cooled sufficiently before storing them! I printed mine in ASA.
A shallow tray to store your iFixit precision bit driver in prime position for instant grabification. Pictured is an older revision of the ⅓ height version. For Gridfinity by Zack Freedman .
A shallow tray to store your iFixit Mahi 1/4" Bit Driver in position for instant grabification. Pictured is an older revision of the ⅔ height version. The models have since been modified to increase tolerances in problem areas. For…
Honeycomb Storage Wall Mako driver set holder with tweezer storage. Logo has been removed from original.
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Keep your precision screwdrivers organized and easily accessible with this custom-designed screwdriver mount/holder, perfect for IKEA Skadis pegboards. Designed specifically to fit the iFixit screwdriver, it also accommodates other…
Wall holder for the iFixit Mako Precision Screwdriver set, using 3,5 mm screws. This design is a remix from iFixit Mako Screwdriver Mount for Ikea Skadis
Holder for iFixit Mako Kit for attachment to an Ikea Skadis pegboard. It uses special pegs designed by @KimJanosch. These can be found here: Skadis/ SKÅDIS universal peg
I had to redesign the model, because the magnet positions on my iFixit Mako case, are different. Additionally I opted for the Rail-Pop Ins, which I really like for their secure connection. If your magnets seem too weak you can stack two…
Wanted to mount my screwdriver set to my wall, so I did. and now you can too :)
Changed the magnet sockets to use 10x2 mm magnets and added an indentation in the bottom of the magnet socket in case glue was needed. I removed a column of bit sockets (plus 1) and the original screwdriver socket to make room for the…
Video: Standoffs: Currently needs 320mm bed space. STEP file included if anyone wants to modify for smaller printers, its not something I will have time for any time soon sorry. A large turntable that uses my "Fixit" fixturing system.…
Simple standoffs to orient things using the FIXIT system. Uses 2.7mm bamboo skewers (has a 3mm hole) to adjust height between the base clamp and a cup. The cup holds plasticine or bluetac to secure most things pretty neatly. Designed for…
Replacement top for the iFixit essentials kit. Designed to have 4 2x4mm cylindrical magnets glued in after printing. Great if you lose yours or if you just don't like that the original is beveled. Logo model included so that a…
Info I wanted to make use of the ferromagnetic back-plate of the IFIXIT Mako and designed these holders for the Ikea Skådis. To use less filament I decided to split the mount. When I installed it to the Skådis it turned out, that the top…
NOTE: I HAVE NOT PRINTED THIS MYSELF AND DON'T KNOW IF IT WORKS BUT IT SHOULD This is a modification of Chris Borge's Scanning Turntable and has been modified to work on smaller printers. I have a Creality K1 and all prints fit on this.…
Skandis Wall Mount for iFixit Manta This adapter allows to mount the iFixit Manta Precision Bit Set including the cover to a IKEA Skandis wall panel! This model is free to use and distribute. It has been printed with a Prusa MK3S+ using…
MultiBoard/MultiBuild holder for the iFixit Mako Precision Screwdriver set. It has 2 multibin rail slots in the back to allow for mounting. I personally am using 2 Flush Large Thread - Lite Fix Points , but any of the Lit Fix Points…
Gridfinity Box for the IFixit Manta Precision Bit Set. The set fits stackable in the gridfinity box and has some additional small trays
A small organiser to keep two iFixit soldering iron tips together when not installed in the tool. Ensure the tips have cooled sufficiently before storing them! I printed mine in ASA.
Bought an ES15S Electric Screwdriver that came with a selection of bits. I wanted a storage space for my the bits included in my iFixit Mako kit and the unique bits from the ES15S. The holder holds 72 bits, which is one more than needed…
This is a basic tray that will give you a nice spot to hold your iFixit Essentials kit. I even threw in the iFixit logo. The tray uses ½ sized Gridfinity spacing, so you can use it at a 21mm or 42mm spacing. It takes up 4 x 4 standard…
A re-implementation of daveh_dev's magnetic mount for the iFixit Mako driver kit using Multiconnect for Multiboard and direct-to-wall compatibility. Like the original, this mount lets you to quickly grab the whole kit or just remove the…
I made this as a challenge to myself so I could finally go through with modeling as well as trying to make more things for my Multiboard system. This is my first model that I've design from scratch with the exception of the snaps on the…
Gridfinity 1X3X3 filled box modified to hold the Fixit Sticks Scope Jack and Optics Bubble Set. Been working on the bench top tool kit and wanted to have these items as part of plan.
Gridfinity 1X3X3 filled box modified to hold the Fixit Sticks Field Pistol Sight Tool. Been working on the bench top tool kit and wanted to have these items as part of plan.
Gridfinity 1X3X3 filled box modified to hold Fixit Sticks Drivers, Extensions, and Torque Limiters. Designed to hold one Large Torque Limiter, three Small Torque Limiters, and up to five drivers and extensions. Been working on the bench…
This skadis holders are for an older ifixit screwdriver and bit set which (I think) is no longer available to buy. I got these in an Smartphone repair kit from ifixit, which you also can no longer buy. There is one holder for the…
This tray snugly fits the iFixit Pro Tech Toolkit (Item # IF145-307-4) in a 5x3 gridfinity sized grid.
A shallow tray to store your iFixit Mahi 1/4" Bit Driver in position for instant grabification. Pictured is an older revision of the ⅔ height version. The models have since been modified to increase tolerances in problem areas. For…
removed some material from the front and rearranged mounts to remove need for supports.
Sideways honeycomb storage wall secure holder for iFixit's Mako driver kit, engraved. My exact settings are embedded in the 3mf file, I used OrcaSlicer. The low filament version is also included, without presets.
Compatibility This bin is compatible with the iFixit Precision Tweezers Set and probably a lot of other tweezers. General It is 1 x 4 x 3 Gridfinity units in size which corresponds to a size of 42 x 168 x 21 mm + rim heigth. The height…
Multiboard holder for iFixit mako driver kit.
If you already have bits from an ifixit toolkit, this adapter allows you to use their bits as a keychain.
Before you start , note that the measurements are modified to fit my box with tape on. The tape adds about 0.16mm of thickness on each side, the tt versions are adjusted accordingly, but without a spare box to test I would not know how…
REMEBER TO MIRROR ON OF THE PARTS IF YOUR ARE DOWNLOADING THE STL FILES, i would recomend to mirror the part WHITOUT the iFixit logo. If the slot in the stand is to wide for your iFixit Manta kit i would using some electircal tape to…
Print the Santa’s Workshop Fixit Train for a festive, hands-on project. The removable smoke stack screwdriver lets kids practice motor skills, learn basic tool use, and have fun taking things apart and putting them back together. Designed…
A holder that's 4x2x4 gridfinity units to fit my iFixit opening tools, from the Essential Electronics Toolkit . It doesn't have room for the tweezers or the screwdriver + bits, which I keep in separate bins: tweezers holder & screwdriver…
Magnetic mount for the iFixit Mako driver kit. Uses Multiconnect to make it Multiboard.
iFixit Screwdriver Mount works for Mako and Mahi. Modified @DavidsGotWood's mount to work with @tchoupshop_82950's low profile T-clips. Download the low profile T-Clips here: Link
I keep this in my backpack and sometimes the buttons get pressed while in the bag and run the battery flat. This prevents that. Slide up to expose the buttons, slide down to protect them. Attached design file in case you would like to…
A Gridfinity organizer for the toolkit from the iFixIt. Update based on the feedback provided in the review: -Updated 2 versions of this print, with a magnetic mat and without a magnetic mat . -Updated the height of the print, it is no…
A second part Gridfinity Organizer for the toolkit from the iFixIt. Any comments, suggestions or remixes are highly welcome.
FixiTrunk is a simple yet effective solution to keep your luggage securely in place in your car’s trunk. Designed to hold bags, suitcases, and other items, it ensures they stay stable and organized during travel. Key Features: Easy-to-use…
If you bought an iFixit replacement battery kit for an iPhone, it comes with a limited set of tools for the job.
I didn't liked most of the models for the manta kit, as they first take a lot of filament and second mostly don't fit my Prusa Mini. Also there was not really a model for the Essential Kit. As all iFixit hard shells (Essential, Manta and…
Clip for WowStick ScrewDriver on iFixit Box. I made this clip so my Wow Stick Screwdriver can clip to the ifixit box with all the bits I use. It clips to the outside of the box. Use a 3mm bit to drill the holes for the clips and 4 or 6 mm…
This is a frame for the iFixit Electronics Essentials toolkit. I printed it in Bambu Lab PLA Basic and I'm pleased with the results. You will need 4 M3x16mm and 4 M3x12mm screws for assembly. I used socket cap screws.
Honeycomb Storage Wall Mako driver set holder with tweezer storage. Logo has been removed from original.
Store your iFixit Mako kit on your GOEWS wall for easy access and location. Slides right in!
Simple holder for six Soldering Iron Tips.
A mounting option for mounting the ifixit magnetic mat on the back of the Skadis wall. Removal to the right. If you mount it on the front, you can remove the mat to the left. The Ultimount from davidmakes is used for mounting. You can…
Clip two of these over your 2020 extrusion or 20x20 square cross section, then attach to the holder with screws. You can use M3x6 or M3x8 screws like with the original, the screw heads will sit flush in the clip. If you want a beefier…
About A simple yet secure Honeycomb Storage Wall holder for the iFixit Manta Driver Bit Set . The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Remixed to fit a Mako Driver Set on an Ikea Skadis…
Skadis Interlock Mounting System printables.com/model/1204958-skadis-interlock-a-ikea-skadis-mounting-system
A quick remix to convert to MultiConnect mounting on Multiboard
Original by @Onelostcause - Includes both versions, with and without the original lid in the bottom.
Gridfinity IFIXIT ESD Tweezers Holder (1x1 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Gridfinity IFIXIT Spudger and Pry Bar Holder (2x1 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Fix your wonderful iFixit Pro toolset to a Skadis pegboard using t-nuts from https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb . I printed this model in PLA with a .4 nozzle and .2 layerheight. I…
Made smaller to fit the box exactly, changed mounting option to T-Clip System by @LineArcLine and low-profile T-Clips by @JoshBeatty_1624529 to be flush with the back wall. Onshape Link if you want to modify it.
Precision Screwdriver Bit Holder Case This case holds 40 precision screwdriver bits securely while allowing for easy removal. Simply lift the bits out of position when needed. The box is held together using magnets , avoiding the need for…
A quick remix of 1x2 Gridfinity Refined iFixit Prying Kit Holder to make space for tool bits and suction cup Please note - pictured is version one, it was fine just the bit holders were a bit to small, attached is the blend file
Simple ifixit Manta kit holder for under desk mounting. Small lip prevents accidental slide out of the kit. Printing Print 2 parts. One in correct orientation, one mirrored. Mounting All you need is 4-6 screws with diameter up to 4mm and…
Represent your favorite online repair community on your Framework Desktop with the iFixit Framework Tile. Print Instructions Material: Any high heat resistant filament will do. Ideally ABS. Print Arrangment: For the best print you might…
