Liczymy pasujące modele…
See latest version, v3.0: https://www.printables.com/model/959686-7-segment-mechanical-counter-version-30-ratchet-fo Version 2.2 of the 7-Segment mechanical counter. Improved design. This particular model is a sequential counter (numbers…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
VERSION 2.8 UPDATES: Added two new covers which have the digit market tiled 1 over, just print one of each of the left and right versions and follow assembly as normal! (Thanks to prusaprinters user Hellfish for the suggestion) This is a…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
Have fun with this longitudinal fidget ring! It spins only a few times until it stops. Then you need to spin it in the opposite direction. I uploaded many sizes (inner diameter in mm from 12.3mm for kids to 24mm for big fingers, please…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
Funny Sign - In case of fire - git commit... (IT Humor) Print with filament change for different colors.
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
Continuing my saga of add-ons for the Logitech G432 headset, I've designed these goofy demon horns. They are a pretty easy, simple and quick print. Based on reviews of the previous model (which you can check out here: Cat Ears for…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
This is a remix of the great design by MW-Mechanical . I needed to print it quicker and just needed 2 digits, so I edited it in Fusion. Remixed and shared under the same attribution.
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
This model is designed to keep the Logitech MX Creative Console Dial and Keypad in a firm relationship. It provides a very stable platform for the Keypad making selections more positive. I also added Harbor Freight toolbox drawer liner to…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hang the GitHub Octocat logo on your wall! The logo is sized to fit perfectly on a Prusa MINI, but you can easily resize in OpenSCAD or in Prusa Slicer! Printer Settings Most logos should print well in PLA or PETG. As little as 5% infill…
Wydruk około 6,82 €–8,33 € nettoWstępna wycena jednego wariantu
Snap-on pen holder for Logitech mxkeys and craft keyboards. It fits a mechanical pencil well and a Sharpie should hold well, but it does not fit as well as a thinner pen.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Habe hier einen Wandhalter für die Logitech Z207 Lautsprecher gemacht der den originalen Standfuss ersetzt.
Wydruk około 14,77 €–18,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed some form of document camera to be able to digitize hand-drawings reasonably fast. Since they're 60+ Euros and I had a webcam around I decided to build a stand for the webcam. Additional material required: 2x40cm 8mm…
Wydruk około 3,68 €–4,49 € nettoWstępna wycena jednego wariantu
Keycap compatible with the wireless Logitech k400r keyboard. I split this keycap into two parts so the connector can be printed lying down because otherwise it wants to catch on the keyboard forcing the user to press in the center of the…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
These rack mount ears are designed to fit the Seneca Element MP digital signage PC model with built-in power supply. They will fit in either direction without blocking intake or exhaust vents, and can be swapped so that the connectors can…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lets get riggity riggity wrecked logo with Rick Sanchez. two color printed logo
Wydruk około 2,23 €–2,72 € nettoWstępna wycena jednego wariantu
This will just barely fit on a MK3 bed if you disable skirt and brim. Print instructions: Print at 0.20 layer height Disable skirt Swap filaments at layer 16 Reference: https://www.imdb.com/title/tt0106977/mediaviewer/rm1865571840/
Wydruk około 6,76 €–8,26 € nettoWstępna wycena jednego wariantu
Version 3.0 of the 7-Segment mechanical counter. Improved design. This particular model is a sequential counter (numbers 0 - 9) that receives a linear input to cycle the display. This version was designed and prototyped using the Bambu…
Designed to be as simple as possible and perfectly functional. Easy to install and works wonderfully. I'm selling this model on my Etsy, the CC license is non-commerical for anyone else:…
Digital numbers drawing template/stencil with side spacer. Multiple number size: 30mm/1.18in (x and y axis scaled to 60%) 50mm/1.97in (100% scale) 70mm/2.75in (x and y axis scaled to 140%) Other dimensions can be made by scaling the x and…
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
Adjusted the design from @seb_241995 to fit Mitutoyo calipers with the side scroll wheel. Fits perfect !!
These extra feet make it possible to mount the Logitech G29 / G920 for a better feeling when gaming with a lower chair setting. Assembly Apply double-sided tape to the positions as shown in the picture below. left: top feet, right: bottom…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
◆ Redistribution of this mod, sale of products/commission using this mod is prohibited. (If you want to do, please contact me.) I am not responsible for anything that happens using this mod. This mod may require post-processing depending…
I recently picked up a 14TB Western Digital Elements hard drive and noticed when placed in a vertical orientation that it wobble back and forth if I bumped my desk. This is a disaster waiting to happen. So I designed up this vertical…
The Arm and Bracket parts slide together after clipping them onto the extrusions. See photos. The C270 camera mount tilts and swivels to provide complete control over camera placement. I have provided 6 different camera mount positions…
This is a stand for Elektron Syntakt / Digitakt I & II / Digitone I & II which are all identical in construction. It elevates the device about 2.5cm off the ground, so you can hide cables from other machines. I also have a stand for…
Duvar paneli kutuları, kendin yap, duvar malzeme kutuları, atölye duvar kutusu, atölye parça kutusu, düzenleyici stl dosyaları, Dijital İndirme, kendin yap duvar paneli kutuları. pratik ve kullanışlı. delikli paneller için delik askı…
🔥 The most complete set of Digits & Letters (lowercase and uppercase) with operators, with or without square bases for kids to learn alphabet and spelling. There are also boards for the letters and digits. There are stl files with all…
Remix based on: https://www.thingiverse.com/thing:2790897 Made a very simple cut out for the volume buttons because they will get pushed in with the original version. Also I didn't find any other side stand like this. It has also a place…
This is a sign with a “In case of fire: git commit…” text. It is designed for printing with a color change mid-print. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam position: aligned…
Neue Version mit Daumenauflage!!! Meine Hand ist größer als der durchschnitt und die Maus hat nicht gut in meine Hand gelegen. Da ich an meiner Hand nicht ändern kann musste die Maus angepast werden. Die Maus ist im ganzen länger und…
Clamp the digital pitch gauge to the control surface of your airplane and you can set the throws of the control surface exactly (via your digital RC transmitter servo end points or dual rates). Set to zero in neutral position. I have put…
Remix of great design by AMT, allows for easier readable legends on single color print or with bad retraction.
This holder mechanically attaches to the multiboard using threaded screws (see https://www.printables.com/model/980088-multiboard-compatible-bolt-for-small-thread ) The caldigit generates significant heat, so there is a clearance between…
A 3D printable, GitHub infused, wifi enabled smart light powered by WLED and compatible with Home Assistant For full assembly and wiring instructions see https://github.com/martinwoodward/octolamp Revised Jun 26 2023: Added holes in black…
After having the scroll wheel break on my Logitech Anywhere MX mouse while it was in it's soft case in my backpack, I set out to make this hard case so I can throw it in my bag and not worry! My first step was to use my school's 3d…
Introducing a mechanical digital clock with numbers strangely arranged. Technical highlights Usually, intermittent motion mechanism such as Geneva drive is necessary to decrease the number of the motors of mechanical digital clock.…
Designed by DSK001, this fun little simulation lets you have digital “sand”. Tip the cube and watch the sand fall. “cube base” is an optional base that uses a standard TT motor to constantly rotate the block on your desk.
Just in time for the baking season before Christmas: Cookie cutters with the complete alphabet from A to Z , all digits from 0 to 9 , and special characters & , - , + . The cutters have been intentionally made sturdy. After all, you want…
Da die Kinder immer zu schnell waren war die Idee das ich mal was zeichne. Die Verbindung vom Steher ( Der mit Klemmverbindung an der Bahn montiert ist) zum Zaun ist derzeit noch mit Kabelbinder gelöst. Gedruckt wurden die Steher und…
Tired of picking up your Logitech Z407 remote to switch audio sources? This print bring the buttons that are on the bottom of the Logitech Z407 Dial/Puck/Remote out to the front. Now you can just leave the remote on your desk. To…
Meine Hand ist größer als der durchschnitt und die Maus hat nicht gut in meine Hand gelegen. Da ich an meiner Hand nicht ändern kann musste die Maus angepast werden. Die Maus ist im ganzen länger und hinten unter der Hanfläche an den…
This is a remix of Szymon's excellent model. All I did was make it one piece, since it will take the USB plug diagonally and you can just push it in then. No screws necessary.
Accessibility Problem & Target Need The Logitech MX Mechanical features a sleek, low-profile switch field with minimal switch travel (3.2 mm) and uniform keycap height. While great for general typing, this flat topography presents real…
Here's a display/holder for Ikea Skadis Pegboard. I also tried to make a pleasant design which does not scream to be utility only. Enjoy :)
guide: https://medium.com/@zoroseerus/zs-a1-3d-printed-symmetric-wireless-mouse-guide-607e6e8e19aa -Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable AAA via magnetic microusb tip or 675 coin…
I'm fully embracing the pegboard as the optimum back wall of my micro workshop and am busily designing adapters for the various tools and supplies I want to have at hand. The multimeter is one of those tools, and I wanted a way to keep…
🚨THIS DESIGN IS NOW DISCONTINUED IN FAVOUR OF A NEW (and better) DESIGN 🚨 Check the new and updated design of this clock ⬇ https://makerworld.com/it/models/2405754-espclock-bold-digital-clock#profileId-2637281…
This is my design for Logitech Z407 speakers that allows low profile horizontal mounting of the speaker using the upright mount position. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15-25 Filament: Uzy Galaxy Black PLA
This is a remix of 3dprose's hygrometer mount for Sterilite storage bins. The original model is designed to fit on a ridge on the underside of the lid. However I found that the fit was too loose for the 54qt and 80qt storage bins (maybe…
Hang your speakers on the wall...
I have designed a speaker holder that connects Logitech Z407 speakers to Nema 100 holes. The speakers are simply attached to the holder. Finally, I used double-sided adhesive tape to ensure that the speakers are parallel to the monitor.…
This is a remix of FilterRing which is somewhat a remix from Nevermore Voron filter. All credits go to https://github.com/songcq/FilterRing https://github.com/nevermore3d/Nevermore_Micro#sourcing-the-proper-acid-free-carbon : Do not, I…
This cap hooks to supernote pen holder, and fits the Staedtler Noris Digital EMR pen. Print with support, as in the picture or .3mf file.
Western Digital hasn't changed the form factor of their My Book/easystore hard drives for a very long time. Shaped almost like a “D” from the side, you can run these hard drives vertically or horizontally. I generally prefer to run mine…
Digits and support for TROMMA Ikea Clock I used black PETG for the digits and white PETG for the support. Split the digits in multiple objects and arrange them to the build plate. For the third clock I printed all at once, starting with…
...to atach speakers straight to the wall.
This model holds a digital angle finder protractor on your skadis wall. No supports needed to print. My Parkside angle finder is ~16mm thick and 35mm wide.
Yes, you know you've always wanted to do this. Take those old Viewmaster reels, convert them to digital and share them with future generations! Well, now you can! This simple device allows you to use your smartphone and digitize…
I love my craft keyboard from Logitech. These keyboards are almost perfect! The keyboard has only one small flaw for me: Because the keys are very low (which makes typing easier), I occasionally accidentally turn on the caps lock or the…
I was annoyed that I couldn't attach the Noris Digital Jumbo to my Supernote and decided to design a holder that can slide onto the pen.
You need to calibrate the tolerances to print good and i recomend to put organic supports.
charger stand for logitech g903 use 5v + and - from a usb cable and 2 4mm screws, the magnets in the mice holds it in in place :) there is wiring channels from the back to the screws
Mount for 3D printer for Logitech webcam
Githyanki | Free STL | D&D 5e Miniature Hey everyone, here's a free Githyanki Miniature from Monsteratlas. We make 3D-printable monsters and characters for D&D and tabletop RPGs, and we wanted to put one out free for the community.…
UPDATE 3/2/26 : Added a multicolor version for AMS or multi tool head style printers. UPDATE 7/21/25 : If you have printed a carry case before 7/21/25, the QR code will be outdated. As of 7/21/25 the QR code on the carry case has been…
I wanted to hang my Satellite Surround Speakers in my Workshop. But I wanted them horizontal and mostly centre pointed facing in the room. The original feet did only provide as standing or vertical. So I designed some new feet with the…
Ständer für eine Logitech K400. Der Halter wird wahrscheinlich auch für andere Tastaturen passen.
This mount mimics the geometry of the Logitech Z623 speakers — engaging the existing screws to make for a clean mount without damaging the speaker body. Remove the rubber feet from the speaker's underside. Use M3x50 screws to fasten the…
This small hanger can get your Logitech Z200's off your desk and mounted up on the wall! I made the holes for #8 screws, and I put 2 screw holes in these hangers, but you'd be perfectly fine using just 1 up top The L & R hangers are…
This is a simple framework expansion card adapter for the newer Logitech Unifying receiver. Print vertically in two pieces with minimal infill – 0.20 mm layer and 15% should work just fine. You will need: - A USB-C to USB-A slim adapter…
The Wolverine F2D Film Digitizer handles up to 5-inch reels of 8mm or Super8 film. This allows you to use 7-inch reels. I saw other setups here and found them to be complex and require bearings, wood, screws, clamps etc. This one uses…
A replacement for the Logitech shifter inspired by those irl katana shifters, a little scuffed since it's my first upload I used PETG and put regular supports under the hilt, which is what it's called. The supports came off as the shifter…
This is a webcam holder designed for the Flashforge AD5X 3D printer. It is primarily made for the Logitech C270 , but can also be adapted for other similar webcams. The mount can be used together with the original Logitech C270 mounting…
This is a holder for Ikea Skadis pegboards to hold a digital angle finder, aka. protractor. You slide in the tool from the top right, so you need some place on the board right to this piece. I printed it with 0.3mm layer height without…
Requires 6 M5x16mm DIN7991 bolts and nuts : https://s.click.aliexpress.com/e/_AB4vpN Then you will need M5 DIN7991 screws to fix the adapter to the hub, but the length depends on your system. The button plate used comes from NSH Racing :…
Many years ago I bought a used Digitech 1101 preamp and some of the knobs were missing. I did eventually get original Digitech knobs from the manufacturer, but that took a while. In the mean time I designed all the knobs for the preamp,…
The original model had the problem that it did not fit into the Elgato Prompter with the high position of the cutout. Here the camera position is more centred so that it fits well and you can also look centrally into the prompter for…
This is an Underware mount for the CalDigit TS4, generated using Andy Levesque's Underware generator. I don't really claim any ownership of this, since I just put the dimensions into Andy's code and this is the file it produced. I've…
@RetroFrog's original design did not fit my WD EasyStore HD, so I redesigned it to fit these hard drives.
I was tired of browsing scoreboards that are waterproof. So quickly printed digits out of PETG. Included 0-9 length: 100mm widht: 60mm height: 1,5mm Simply separate from each other in the Prusa Slicer and print. Designed in such a way…
Replacement of central part of logitecg g29 steering wheel. Perfect for SRT fans. If you need any other car brand logo let me know :)
A fun and playful lamp to match the energy of GitHub Copilot . Touch controls to switch modes and turn on/off. Helmet and eyes are interchangeable. Have fun and customize it! WiFi connected and powered by WLED . Compatible with Home…
if you need to change the size of your lense STEP file available → here For the lens adapter, I'd recommend printing a layer height of 0.15 or less Logitech 270 webcam wide lens adapter with manual focus function
Designed to be as close as possible to the original Logitech Z407 speaker stand. I lost one of them during a move, so I used calipers to measure the one stand I had, created a replica in Onshape, and printed a replacement which worked…
Mounts onto any of the threaded holes in the upper frame using M3 hardware. Follow the C920 disassembly guide here . You will also need to print this mount , originally for Voron. Not posting it as a file here to avoid any confusion as to…
Designed a corner mount bracket to fit the ¼"-20 tripod mount screw for a Logitech C920 (should fit pretty much ANY camera with a normal tripod mount screw). Has attachments for the bottom of the extrusion or the inside. Print with…
Simple webcam mount for Logitech C525 webcam for the inside of lack table enclosure.
I had to service my Logitech G305 mouse, and the original skates were very worn, so I designed them. I printed them in ABS. I'm also uploading the Fusion 360 file in case it requires modifications (although it fits perfectly in my case).…
This is a ring fitted on the back of the clock. It makes the digits more legible againt a white wall. It's designed to be printed with a 0.2mm layer height.
The hammer caps on my digital piano got old and deteriorated, was $25 for a few new ones so I figured I would try it out in TPU. Works and sounds great. will probably last longer than the original ones. Be sure to slap a little silicone…
Simple Logitech Webcam C930e mount for PrintClosure Uses original M3 hole in the corner of the enclosure. Additional: ¼ inch camera screw ( Like this one )
SCALE TO 1000% when using obj files Could not find any middle buttons for the K400 plus so i made my own the STEP file and the STL/OBJ is attached, feel free to alter how you want I have pre made some of the most common apps but you will…
I merged together the official g502 plate model and a nice finger rest I saw on here but didn't like it going behind the mouse. I also added a little slot for 5,2mm radius magnets. It's a bit tricky to mount it but it's worth it
box for digital protractor / digital Winkelmesser Aufbewahrung material: 3DJAKE TPU A95 Orange nozzle: 0.6 / layerheight: 0.3 / infill: 100% printed with support, removing was surprisingly easy lid and base slide together perfectly and…
Printing Information: Use tree support to support the voronoi structures. You can get away by only supporting the critical regions. Use a brim, since its contact surface with the printbed aren't all that much.
THIS MAY BE OUTDATED! Latest version always at https://github.com/LockManipulator/Locksport/tree/main/Safe%20manipulation/Digital%20Dial%20Magnifier This is an encoder that sits on the dial of a safe lock to aid in manipulation. It can…
Edited version of the original (https://www.printables.com/model/181710-logitech-g29g920-steering-wheel-magnetic-paddle-sh) to fit a pair of 20x6x1.5mm magnets on both sides. I used magnets with a 1.6kg pull force that I had laying…
