P
Printablescrawlnyc
Craig Jackson and Fraig Jackson Grilles for Vanquish H10 Optic
Designed a couple grilles for the H10 optic. I printed them in both asa and pla and they both printed out great.
- Pobrania
- 603
- Polubienia
- 30
- Ocena
- 5
Wyniki wyszukiwania: h10
Liczymy pasujące modele…
P
PrintablesCapra-Audio
RODE NTH100 Headband Fix
To replace the locking mechanism first you need to remove the hex screw from the inside of the connector, set it and the twist lock that should now come free to the side. Next if it hasnt completely fallen apart by now you need to finish…
- Pobrania
- 281
- Polubienia
- 14
- Ocena
- 5
P
Printableszzet
CZ 75 P-09 P-07 Front Sight 5.25-8.00mm (H1-H10)
Want to try new front sight height? Choose one, print with highest quality (from ASA/ABS or similar heat resistant filament) and install on Your CZ. Before install use fine sandpaper to smooth out top of the post. I've tested it and it…
- Pobrania
- 279
- Polubienia
- 16
- Ocena
- 5
P
Printables3DeeForm
Cross Clip for Decathlon Tent MH100 (2 People)
EN I bought this tent Decathlon MH 100 (2People) a few years ago. When setting up, the two brackets always unfolded for me. So I always held them together with Velcro, which you use as a substitute for cable ties. But I didn't find this…
- Pobrania
- 157
- Polubienia
- 52
- Ocena
- 5
P
PrintablesSome_Guy
Shimano TL-FH10 Dura-Ace 7400 Freehub Removal Tool
This is the EXTREMELY rare Shimano TL-FH10 Dura-Ace 7400 freehub removal tool from the 1980s/early '90s. Only 3-5 of these come up on e-bay every year and they sell for $60-100 each for what is essentially a SINGLE BOLT. Not only did I…
- Pobrania
- 154
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMakers Workshop
DH100 Vampire Cockpit
This is the cockpit I created for the Der Jet DH100 Vampire Jet Model. The files include all required STL files to print the cockpit parts as well as the resized gauge photos to fit the printed dash panel. This will require an advanced…
- Pobrania
- 133
- Polubienia
- 18
- Ocena
- 0
P
Printablesnurdok
Honeycomb Storage Wall holder for Brother P-touch H105 label maker
No supports needed. I printed mine in PLA. Connect to two “Insert to M3” parts to connect to your HSW. I used M3x10 screws and M3n nuts.
- Pobrania
- 110
- Polubienia
- 19
- Ocena
- 5
P
PrintablesJannes V
Sony WH1000-XM4 Case holder for IKEA Skadis
A fitted holder for the case of your trusty XM4s! Made to work with Skadis. Best printed upside down, with support enabled. It's possible to save on supports, by just placing a line of supports down the middle, and under the pegs.
- Pobrania
- 104
- Polubienia
- 38
- Ocena
- 5
P
PrintablesThibault Huguet
Polar H10 box
Remix of the parametric rugged box to store my Polar H10 heartrate belt when travelling. Belt and sensor in separate compartment. Added some room to add some felt fabric (1.5mm thickness) to protect the sensor better. Note that the…
- Pobrania
- 91
- Polubienia
- 20
- Ocena
- 0
P
PrintablesBasementLAB
Fork Spring Spacer Washer 35.5/26mm th10mm Honda Transalp 600/650 - Rondella Distanziale Molla Forcelle 35.5_26 sp10mm Transalp
Fork Spring Spacer Washer 35.5/26mm th10mm Honda Transalp 600/650 Rondella Distanziale Molla Forcelle 35.5_26 sp10mm Transalp Filaments recommended: Nylon PA12 ASA PPS-CF PPA-CF PA6-CF PAHT-CF PA6-GF or filaments with a excellent…
- Pobrania
- 91
- Polubienia
- 4
- Ocena
- 0
P
PrintablesValerii
Hibrew H10A Tamping Station
Portafilter tamping station in two variants — for basic portafilter or with unscrewed spout (pic3)
- Pobrania
- 85
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBret
Vanquish H10 Panhard Mount
This allows the installation of Vanquish H10 front steering axle in vehicles equipped with 3-link suspension (VS4-10 or similar). The piece attaches to the axle with the lower shock bolt and the bump-stop screw. The panhard attaches with…
- Pobrania
- 85
- Polubienia
- 6
- Ocena
- 0
P
PrintablesVirchow
Corsair H100i RGB Elite Low Profile Pump Cover
This is a custom pump cover for the Corsair H100i RGB Elite AiO water cooler. It replaces the original pump cover and white RGB diffuser that are clipped in with plastic latches. Print instructions: ASA or ABS or any other heat stable…
- Pobrania
- 79
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMrToToRo
SAB Goblin kraken 700 S "ESC SUPPORT" (H1068-S)
This pad does not require brass spacers, I recommend printing from PETG with 50% filling
- Pobrania
- 78
- Polubienia
- 2
- Ocena
- 0
P
Printablesthe_real_mcarn
Sena SMH10R / 10R Battery mount for Smart HJC Cover
I got a second hand Sena SMH10R headset that was missing the battery clip so I made my own. In this case fitted on an i90 helmet, but it should fit any HJC helmet that is prepared for use with Smart HJC. Keeps the battery for the Sena…
- Pobrania
- 73
- Polubienia
- 2
- Ocena
- 5
P
PrintablesJohannes
Gridfinity Brother P-touch H101TB
Feel free to improve my design, I tried my best with the tools I had.
- Pobrania
- 66
- Polubienia
- 4
- Ocena
- 5
P
PrintablesPrinter
SK10,SH10 Držák vodící tyče - Vertikální
Vertikální držák vodící tyče SK10/SH10, vhodný pro vodící tyče o průměru 10 mm.
- Pobrania
- 64
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPajar09
H100 VFD Panel Mount Keyboard
VFD KeyPad Holder for the H100-1.5C2-1B
- Pobrania
- 64
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMarcK
Distanz - Rugel - Ø25 H30mm - H10MM
9x Distanz - Rugel/Puffer - Ø25 H30mm - H10MM - 8x Step 2.5mm => H30mm - H10mm - Dimension: Ø25 x H30 - H10 - Bohrung 8mm - 2 Versionen => Flach oder mit Radius - Infill 25% unter den Schrauben 50% zip.Datei => original CAD-Paramater…
- Pobrania
- 58
- Polubienia
- 4
- Ocena
- 0
P
Printablesspm3x.com
Standard 10 HP 3U Eurorack Module SP1H10 for the SP1 Modular Eurorack Case
50.8mm standard Eurorack Module with a horizontal pitch of 10 HP (1 HP=5.08 mm). The module can be combined by assembling the modules with threaded strips. Free STL file downloads for other modules available under…
- Pobrania
- 52
- Polubienia
- 18
- Ocena
- 0
P
PrintablesXaldew
Sirui VH10 Rosette Adapter
I've owned the Sirui-VH10 tripod head for a while now, and while it's a good product, I felt that the 'rosettes' (i.e., Hirth joints) were a bit under-used. By default, it is only used to attach the camera handle on one side of the…
- Pobrania
- 50
- Polubienia
- 5
- Ocena
- 0
P
PrintablesOilcan12
Vanquish H10 Optic Roof Rail
Vanquish H10 Optic Roof Rail accommodates light bar
- Pobrania
- 45
- Polubienia
- 6
- Ocena
- 0
P
PrintablesVG Prints
H100i Pump Cover
I have a thing where I hate logos. So this was a way to make the Corsair logo go away… Sorry Corsair its me not you. I have 3 different models. One I made of my cat, the other is a blank and the other is to make your own if you happen to…
- Pobrania
- 45
- Polubienia
- 10
- Ocena
- 0
P
PrintablesPrinterInUse
Corsair H100i Cover
Cover i made for the H100i by Corsair. im not sure if it will fit other models but let me know if it does.
- Pobrania
- 42
- Polubienia
- 9
- Ocena
- 0
P
PrintablesaRGiRob
sonoff th10/16 + temperature and humidity sersonr enclosure
This is an enclosure for sonoff th10 or th 16 switch. i have some dht22 sensor so instead of buying itead sensor i decided to hack the board and install the sensor without the jack. also need to open the original enclosure because of the…
- Pobrania
- 41
- Polubienia
- 7
- Ocena
- 0
P
PrintablesSpegelius
Corsair H100i Gigabyte Aorus covers
Made this covers per request and got permission to publish. 3 versions with bit different logo designs. I printed them with clear Extrudr PETG on the bottom and black PETG on top. On the bottom parts I used a variation of the…
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0
P
PrintablesM
Corsair H100i AMD CPU Adapter AM3/AM4
Corsair H100i AMD CPU socket adapter. AM3 & AM4 *use Intel hardware for mounting (thumb-nuts, standoffs and screws) 28OCT18- Updated the design to allow for the Corsair Link cable to be plugged into the pump...my earlier revision did not…
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 0
P
Printablesjogo
Polar H10 HRM unsnap tool
Polar instructions say to to remove the unit (they call it the “connector”) from the strap between uses, in order to preserve the battery life. This tool wedges around the snap to minimize the strap bending which could damage it. It makes…
- Pobrania
- 38
- Polubienia
- 6
- Ocena
- 0
P
Printableseric.yeargan
Hitachi CH10FCH2 Miter Saw Zero Clearance Table Insert
My main motivation was to replace the factory insert that I had melted while cutting metal with a cutoff wheel - having a zero clearance insert is just a nice side benefit. My print settings: PolyLite ABS 0.2mm layer height 4…
- Pobrania
- 38
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLuk3Designs
Sliding Door Stopper for Toyota Hiace 1989-2004 (H100)
This is a replacement stopper for the sliding door on a Toyota Hiace (H100) 1989-2004. Tested and fitted on my RZH103R Hiace but should be same across all models from that era. The part that goes on the sliding door has enlarged holes for…
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPajenicko
Adapters for expLORA METEO sensor kit (WH1080)
This printable adapter and sensor holder set is purpose-built for the expLORA METEO wireless weather station. It combines a ventilated electronics housing with a sturdy mast bracket so you can log temperature, humidity, pressure, wind…
- Pobrania
- 35
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSnowHead
Replacement Part for Footboard Cover H102 of E-Scooter SoFlow MyTier
Unfortunately, the rear footboard covers on the Soflow MyTier e-scooter protrude far and are very fragile. You often get caught on door panels and tear them off, breaking them every time. Because of the thin wall thickness, a repair with…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesStrife Tech
Ghost in The Shell Laughing Man H100i Cover
Printed in Elegoo Transparent, I actually left the supports on the back.
- Pobrania
- 34
- Polubienia
- 11
- Ocena
- 0
P
PrintablesYotus
Rover Mini Fuse Lid (YQH10001)
A friend asked me to design a replacement lid for the fuse box of her Rover Mini car, so here it is. I printed this one with PETG, and you probably should as well. The original part might have been PVC, and PETG should have similar…
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMarcK
Bithalter für Lista-Schubladen H100 - Links
Bithalter für Lista-Schubladen H100 - Links Allgemein: Aussenmasse: 175 x 105 x 50 ( Mit Stahlwille TCS 175x350 kompatibel ) Lista Schubladen: H100 / T450mm ( 105+350 => 5mm TCS Schaumstoff-Klemmung ) Mit Lista-Boxen 150x75mm kompatibel…
- Pobrania
- 32
- Polubienia
- 10
- Ocena
- 0
P
PrintablesDavid Fiala
WH1080 - temperature radiation shield mount with fan
Radiation shield mount with fan for cheap weather station kit: https://www.hadex.cz/t110-vnejsi-mechanicke-dily-k-meteo Separated to parts, no supports needed. Print from UV resistant filament - ASA or PETG for example Parts needed: 4020…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
Printableszeitverschreib
Skadis holder for Polar H10 Heart Rate Monitor
I needed a place to put my chest strap and sensor and since I'm currently very deep down the Skadis rabbit hole… The after-print photo shows multiple hooks, but you only need two, of course.
- Pobrania
- 30
- Polubienia
- 7
- Ocena
- 2
P
PrintablesAD3D
Rode NTH100 Left and Right Ear Outer Lock V2
When the locks fall apart (and they will), print these out (Left and right are different) Both are included in the file. Then use a soldering iron to heat set the original inserts into these printed replacements. There is a correct…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
Printablesraketqueen
Vanquish H10 - Custom Dummy Lights from POORIGIN
This is a custom dummy lights inspired from the POORIGIN set created by Jerry Scaler with the labeled Toyota TRD logo. This is my first printed in my AMS lite. Printed in Bambu Lab PETG-HF filament with the settings below with AMS Nozzle…
- Pobrania
- 28
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAki
G-SHOCK DW-H5600 or GPR-H1000 Dedicated stand
This is a dedicated stand that uses the included charging cable. The cord can be wrapped around the back of the stand.
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMarcK
Bithalter für Lista-Schubladen H100 - Rechts
Bithalter für Lista-Schubladen H100 - Rechts Allgemein: Aussenmasse: 175 x 105 x 50 ( Mit Stahlwille TCS 175x350 kompatibel ) Lista Schubladen: H100 / T450mm ( 105+350 => 5mm TCS Schaumstoff-Klemmung ) Mit Lista-Boxen 150x75mm…
- Pobrania
- 24
- Polubienia
- 5
- Ocena
- 0
P
Printableszzzy
FIt-over sunglasses temple for SolarShield 2RH100SE
A remix of Fit-over sunglasses temple replacement by broodrooster . Edited in tinkercad to fit my SolarShield 2RH100SE (UPC# 87557700482 I believe) fit-over sunglasses because both original temples have snapped. This is just the left…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPontus K
Thinkware H100 part of mount
This is a part of the mount i made for my friends Thinkware H100 dash cam. The part was missing when he got it and didnt bother contacting the store. Instead, i got the challange to make the part and here it is. I made this in two parts…
- Pobrania
- 24
- Polubienia
- 0
- Ocena
- 0
P
PrintablesValerii
Hibrew H10A Drip Tray for bottomless portafilter
Hibrew H10A Drip Tray for bottomless portafilter or portafilter without spout (you can unscrew it from your portafilter)
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMashadar
Sena SMH10 Dual Wall Mount
Remix of the Sena SMH10 Wall Mount from GoMoeJoe to accomodate 2 devices. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Any Any Any Category: Organization
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDrebinWorks
Knurled Cylinder Dx0 H100
It just a simple knurled cylinder. I tried knurling with Fusion 360 for the first time on a simple object. Worked quite well. So have fun with it... Printed on a Prusa Mini with Galaxy Black PETG. Added a D90 variant
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printablesgia
David Clark Mic Adapter (Use M-77 mic on H10-76 headset)
My David-Clark aviation headset came with an old-school carbon mic (M-87) that made it tough to use with modern gear. So I bought an unamplified electret mic (M-77) from David-Clark and designed this adapter for it. I opted to keep things…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPolinik
Multiboard Broter P-Touch H107 mount
I remixed Herr Doctor H107 Skadis mount for use on multiboard. 3 walls 15% Infill
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
Printableslopatoman
Polar H10 storage box
Remixed - original can be found here: https://makerworld.com/en/models/822000-polar-h10-storage-box
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJack Lenders
Hubsan H107 C Propguard
Not impresed with the Hubsan design for the propguard (bad geometry and weak strut connections). Made the new design to be much more durable and shock absorbing. Flight is a bit more stable aswel, due to the slight ducted fan effect of…
- Pobrania
- 17
- Polubienia
- 5
- Ocena
- 4
P
PrintablesJim Thompson
Thule Summit Tie Down Bracket - TH10375
A quickly designed replacement for Thule TH10375 used on Summit and similar roof boxes.
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSaufziege
De'Longhi MultiGrill CGH1030D Feststellknopf
Das Problem Der originale Feststellknopf des De'Longhi CGH1030D Grills hat eine bekannte Schwachstelle: Die kleinen Ecken des Rastmechanismus nutzen sich mit der Zeit ab ("werden dull") oder die Schraubdome im Inneren brechen. Das…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSTxS
Vase Ø100 x H100 mm
Material diverse Layerhöhe 0,2 mm Vasenmodus Linienbreite 0,6 mm mit Düse 0,4 Mit den richtigen Einstellungen ist die sogar wasserdicht. Gutes Gelingen und über ein Like würde ich mich freuen.
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesaxelsp94
Brother PT-H100LB Label maker USB PD conversion
Dummy battery with metal connectors made out of M4 screws. Connect to a power source and use the label maker without wasting batteries. Tested on PT-H100LB. Might fit similar models. Standard uses 6x AAA batteries. Materials: 2x M4x25…
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRaymondKelly
Brother P-Touch H105 Case Carry
Brother P-Touch H105 Case Have Fun, dont hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Hobby
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
Printableshellomynameisfi
Apex EVO capacitor mount (for EEU-FR1H102 (1000 µF 50V ⌀16 mm/26+ mm)
A simple side mount for a Panasonic EEU-FR1H102 (1000 µF 50V ⌀16 mm/26+ mm) capacitor (27mm long; 16mm diag.). Print with TPU.
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGuimz
Washer Door latch Striker WH10X10004
Washing machine door latch part number WH10X10004, 131763302 or 131763310. Fits GE, Frigidaire and probably more.
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAmicoJeko
Sena SMH10r battery replacement
I made this replacement battery for my Sena SMH10r bluetooth headset, because it was purchased 5 years ago, and apparently, Sena changed the shape of the connector, and the new replacement battery is no longer compatible with older…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesStefan Kohlbrecher
Mount for H101/H8 Mini board with Bayang Toys X9 Props
Customized version of http://www.thingiverse.com/thing:1735045 modified to fit BayangToys X9 props with 2mm distance between props. Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1735045 Instructions…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printableskabturek
Brother P-Touch pt-h107 label maker angled holder for multiconnect
A remix using multiconnect at an angle so its easier to take out and takes less space on board. Printed on bottom, 4 walls, 25% gyroid infill.
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
Printablesanother gary
Thumbsticks for Hubsan H107D Transmitter
Thumbsticks for Hubsan H107D Transmitter Print Settings Rafts: Doesn't Matter Supports: Yes Infill: 100% Notes: Print sideways for strength Category: R/C Vehicles
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTheloniusChunk
Sena SMH10 Cap
The protective cap for part of the helmet mount on my Sena SMH10 broke apart, so I designed this quick and dirty cap. I don't know what this is actually protecting, but it probably shouldn't be open to the elements. Designed for and…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBombino
Sennheiser HH10 Extension
Extended Upright for Sennheiser HH10 Headphone Holder , adapted for use with tabletops thicker than 1.3" / 3.3cm. Also confirmed fitment with Auray COHH-1 , and may work with other clones. Works with tabletops up to about 65mm in…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printables3Dpetr_kolos
Reduction for WH1080 - expLORA METEO
Reduction for expLORA METEO Reduction for extending the original pipe to the side.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAl1sa
Backgammon chips (d19, h10)
I print them with 0.3 mm layer lines and adaptive layer lines at the top. Printed in PETG and PLA with different infill percentage for the same weight
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGenokrad
FlexATX PSU adapter for Cooler Master MasterCase H100
This 3D model set includes a custom FlexATX PSU adapter and an additional reinforcement bracket designed for the Cooler Master MasterCase H100 PC case. The adapter provides mounting points for the FSP FSP220-60LE power supply (not tested…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesparagraf85
Hibrew H10 Pro Coffe Station
Hibrew H10 Pro Coffee Station to be placed on top of the machine. Highly encourage you to use and remix the Blank version as I highly doubt that you would have exactly the same stuff what I have in my setup. I have designed it using…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesArealsito
Corsair H100 AIO adapter for AM4 ( U bracket)
This model attaches the U shape bracket of the Corsair H100 AIO from LGA 1155 to AM4. Heat resistan filament ir REQUIRED, Such as PC that i have used or similar.
- Pobrania
- 5
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAlan Urteaga
Casio H101 Case Back Removal Tool
This is a case back removal tool that I made specifically for the Casio H101 after I was searching for a tool to open the caseback and didn't find anything cheap. I did find another casback removal tool linked below. Case Back Tool:…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTrueGeometry
Customizable Caffeine (C8H10N4O2) - Labeled 3D Molecule Model
Caffeine is the stimulant in coffee and tea, a fused two-ring structure with four nitrogens. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFrixo
Montura de techo para proyector modelo H100. / Ceiling mount for the H100 projector.
These are two different models: one with a tilted cut for angled installations and the other completely level. I’m currently using the tilted version, as my projector has no built-in screw mounts, and this design fits it beautifully. I…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
Printablesmichael samuels
Casa Lightweight Front Mid Cover H100 passthrough
From the Millennium Machines Discord. Silverback_Attack made the lightweight version of the Casa and Jonthanmarsh made the cutout for the H100. I combined them so you can have the best of both worlds. Tried finding their models but had no…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesenthusiasticGeek
H100445 Top Drawer Bracket for Bush Home 72W Single Pedestal Desk
The Top Drawer Bracket for my 72W Single Pedestal Desk (Model Number A189223F) arrived pre-smashed, so I whipped up a replacement part for it. I'd imagine it's used in some other desks or drawers.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAlexander Mikhaylov
Screwdriver set cover Stayer Max Grip 25911-H10 G
Screwdriver set cover Stayer Max Grip 25911-H10 G Color AMS PLA Black PLA Transparent Infill 75%, 3 Walls
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTrueGeometry
Customizable Butane (C4H10) - Labeled 3D Molecule Model
Butane is the four-carbon alkane found in lighters and camping stoves. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol plus proton and…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHerrcookiekiller
Huion H1060P Inspiroy Labelled Buttons
A blank is provided in case you want to make your own. Simply extrude the icon/text you want 0,4mm upwards. I can also make buttons for you, just hit me up in dm's. As for printing: -add a material change to the top few layers where the…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesWizard Sleeves
Eye Cup Olympus GWH10x23 Japan (MKII) 3 + 1 Variations
I found the first iteration of these mildly uncomfortable after some extended microscopy sessions. I've updated the design here for comfort and ease of use. I recommend using TPU or some other softer materials for the eyecups. PETG works…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMolGod Scientific
Cyclohexanone C6H10O, CAS 108-94-1, 3D Model
Cyclohexanone (C6H10O, CAS 108-94-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Every atom carries its engraved element symbol, so no colour key is needed. Most printable molecule files rely on…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Replacement Part for Footboard Cover H102 of E-Scooter SoFlow MyTier
Unfortunately, the rear footboard covers on the Soflow MyTier e-scooter protrude far and are very fragile. You often get caught on door panels and tear them off, breaking them every time. Because of the thin wall thickness, a repair with…
P
Printables
Polar H10 storage box
Remixed - original can be found here: https://makerworld.com/en/models/822000-polar-h10-storage-box
P
Printables
Knurled Cylinder Dx0 H100
It just a simple knurled cylinder. I tried knurling with Fusion 360 for the first time on a simple object. Worked quite well. So have fun with it... Printed on a Prusa Mini with Galaxy Black PETG. Added a D90 variant
P
Printables
Apex EVO capacitor mount (for EEU-FR1H102 (1000 µF 50V ⌀16 mm/26+ mm)
A simple side mount for a Panasonic EEU-FR1H102 (1000 µF 50V ⌀16 mm/26+ mm) capacitor (27mm long; 16mm diag.). Print with TPU.
P
Printables
Hibrew H10 Pro Coffe Station
Hibrew H10 Pro Coffee Station to be placed on top of the machine. Highly encourage you to use and remix the Blank version as I highly doubt that you would have exactly the same stuff what I have in my setup. I have designed it using…
P
Printables
Washer Door latch Striker WH10X10004
Washing machine door latch part number WH10X10004, 131763302 or 131763310. Fits GE, Frigidaire and probably more.
P
Printables
G-SHOCK DW-H5600 or GPR-H1000 Dedicated stand
This is a dedicated stand that uses the included charging cable. The cord can be wrapped around the back of the stand.
P
Printables
Huion H1060P Inspiroy Labelled Buttons
A blank is provided in case you want to make your own. Simply extrude the icon/text you want 0,4mm upwards. I can also make buttons for you, just hit me up in dm's. As for printing: -add a material change to the top few layers where the…
P
Printables
De'Longhi MultiGrill CGH1030D Feststellknopf
Das Problem Der originale Feststellknopf des De'Longhi CGH1030D Grills hat eine bekannte Schwachstelle: Die kleinen Ecken des Rastmechanismus nutzen sich mit der Zeit ab ("werden dull") oder die Schraubdome im Inneren brechen. Das…
P
Printables
Sena SMH10R / 10R Battery mount for Smart HJC Cover
I got a second hand Sena SMH10R headset that was missing the battery clip so I made my own. In this case fitted on an i90 helmet, but it should fit any HJC helmet that is prepared for use with Smart HJC. Keeps the battery for the Sena…
P
Printables
parts for a lego sutphen sph100
you will need a big printer to print this (elegoo neptune 4 max or bigger)
P
Printables
SKÅDIS holder for Sony WH1000-XM4
Disclaimer: this is definitely not the best / easiest to print headset holder around. This was more of an excuse for me to experiment with dovetail joints running along an arc. You're probably better off searching for generic SKÅDIS…
P
Printables
Gopro mount Vanquish H10 Optic
The roof rack with the GoPro mount is mounted to the rails with M2 screws. For use with Gopro standard Quick mount.
P
Printables
AIO Support for H100x
Support for AIO radiator. Printed of PLA except the foot with TPU to limit vibration. The hexagon pattern come from the infill, with removing top and bottom layer with some modifier to get where i wanted. The project was to plug the AIO…
P
Printables
FoxESS 120mm fan mount (KH10 support)
Designed specifically for the Fox ESS KH10 , this mount likely fits a wide range of Fox ESS models . If your inverter has heatsink fins approximately 2.7mm thick with a 12mm pitch (center-to-center) , this mount will clip directly onto…
P
Printables
Brother PT-H107 USB-C power supply
My batteries died so I quickly slapped together this adapter :D BOM 2pcs 6x3 magnet - https://www.aliexpress.com/item/1005009925738981.html 1pcs Usb-C PD trigger board - https://www.aliexpress.com/item/1005009535113538.html 10cm of 24AWG…
P
Printables
RailShade RSH101
Airstream/RailShade crossbar end cap inserts RSH101. Replacement for lost caps.
P
Printables
Polar H10 gridfinity storage
Simple gridfinity compatible compartment for Polar H10 strap, with 2 slots for batteries
P
Printables
Polar H10 - Skadis - dual half
I've made a second shelf so you can store two sensors. Printed on the back side not using supports supports. PETG E-sun