Liczymy pasujące modele…
HAFC V2 – Hackman Automatic Filament Cutter by Hackman3D Here's a link to get the necessary hardware. No partnership or affiliation involved, but since the price is reasonable, I haven't asked for a commission. HAFC Aliexpress Pack back…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena jednego wariantu
This is a remix of the original File by Back37strad. My main goal for this was to make an actual knob smaller compared to the original in height. You can see in the images how it compares to the standard knobs on my beautiful Ibanez…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Building Under Construction - Elevator Shafts - Part 2 Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new.…
Wydruk około 2,68 €–3,27 € nettoWstępna wycena jednego wariantu
A compact attachment that screws onto a Dremel flexi shaft for cutting 5mm rod or tube. Use with a 38mm grinding disc or saw (saw not tested). I use it to cut carbon fibre tube. The two parts print in place without additional support.…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
The is the new driveshaft that will be used in my RC Car V2, five times ! It drives the wheels (that's 4) and is also used for the front transmission. The overall length is ca 60 mm and it is still a double universal telescopic joint.…
Wydruk około 1,31 €–1,61 € nettoWstępna wycena jednego wariantu
Schloss Johannisburg der Stadt Aschaffenburg Print instructions Printed in Prusament PLA with Supports
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
Be sure to print in this orientation Attach it to your horn at the 3rd-valve slide and rest the other side where the lead pipe enters the 3rd valve. I've also added a set screw hole for an M3 screw. The *.f3d file is attached - please…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hilfsschablone zum knöpfen von Freundschaftbändern
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Handle for keyless drill chuck 0,3-3mm hex 1/4" shaft To secure chuck in handle 2x M3x10mm socket head screws are needed. Holes for M3 screw should be tappered by M3 tap before screws are inserted. Material: PLA, PET-G etc. Layer high:…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Jeder kennt das Problem. Man will Schafkopf spielen aber keiner hat Schalen für sein Münzgeld und muss dann mühsam auf einem Zettel mitschreiben wer wem wie viel Geld schuldet. Da ich kein Modell dafür gefunden habe, habe ich meine…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Some older models of the Ecovacs Deebot have a brush roll with a keyed shaft which requires a square adapter to fit into the robot. This is a tiny part and easy to lose. Should fit: Deebot Ozmo 900 / 901 / 930 / 950 / 960 Deebot M87 / M80…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
By accident created a nice little crankshaft mechanism. With very little cleanup, mostly the brim, and a careful rotation of the parts, it works. It is one print, no support material or anything else.
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Insbruck als Karte
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
Used for prototyping robot designs in the BEST Robotics Competition, https://www.bestrobotics.org/site/ , intended to be used in place of compliance parts within the returnable kit provided by the non-profit organization. Printed in PETG,…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About: Connect any part of Dummy13, or anything with the same type of connection. Now you can be creative and show me what you've managed to do with it. Dimensions & Compatibility: There is no need to change the dimensions of the Dummy…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Problem The X and Y stepper mounts on the CR-10 tend to flex when under higher load and using enough belt tension to be able to use higher acceleration values. I initially tried to use a stiffer mount plate, but that did not solve the…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The file is of the teeth or claws that are part of the base mold for the gearshift hood frame of some models of Fiat Palio cars. As these are older models, this part is difficult to find or too expensive for my liking. And this part is…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Es gibt keine Besonderheiten zu beachten beim Drucken dieses Werkzeuges. Es soll eine Möglichkeit bieten auch Sechskantschrauben mit 13mm Durchmesser zu in engen Stellen zu lösen. Als Bspl. jedes handelsübliche Waschbecken hat genau…
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
benötigt wird noch eine Würfel und ein paar kurze Stäbe mit ca 3mm starke und 15mm länge, Anleitung
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Sometime ago, I bought a CoolerMaster HafXbEvo pc-case from some guy on the internet. He has never mentioned that one of the casefeet was broken... Luckily we can nowadays print our replacement parts. The feet I designed are no exact…
Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu
I designed this drive shaft optimization. It is a hexagonal shape with an increased section. I had issues with TPU shaft. Indeed, the coupling was grinded in early 15 minutes of uses. I decided to change the print orientation. It works…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Two-color extruder visualizer with long shaft. You will need 2 neodymium magnets 8x3mm. PLEASE SEE MY OTHER PROJECTS! :) https://www.printables.com/pl/social/236468-nieuniknione/models & Collection: EROTICA :)…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Dieses Modell wurde für die St. Johannes Schützenbruderschaft Delbrück ( https://schuetzen-delbrueck.de ) entworfen. Es zeigt die Silhouette eines jubelnden Schützen, der triumphierend auf den Schultern von zwei weiteren Schützen sitzt…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a basic knob replacement for appliances that have a D-shaft to rotate between different modes recommended 100% infill and to be printed sideways with all the lines being arranged lengthwise
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
While overhauling the engine on the bench it's necessary to turn the engine. The length is designed that the rotor nut gives tension to the hextube so the slot for the Woodruff key does not take the load alone. I made two versions: Heavy…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…
4-11-22 updated model with stl parts
This is a remixed shaft/stem for @3DPrintnovesia Realistic Rose model for the other parts please visit the original design, and leave a like and follow there too :)
Quick guitar knob, wanted some black ones for my 335, but now im thinking about making them out of tpu....will update. ** UPDATE ** TPU knobs are awesome! printed at 215/55c 25mm/s 7% infill they are nice and squishy! Print Settings…
Updates 20 November 2023, added a Sprite Extruder Mount . Linear Rod Upgrade I used CNCKitchen inserts and ProperPrinting's tool change system for this project. Information I've made a linear shaft upgrade for both the X-axis and Y-axis…
Part is printed with PETG and need partial supports.
Weihnachtsbaum mit Winterlandschaft und Teelicht Beleuchtung. Gedruckt in Weiß, mit Hyper PLA, damit die Beleuchtung heller ist. Stützen nur unten bei der Teelichtöffnung. 15% Infill Viel Spaß Christmas tree with winter landscape and tea…
Build Mod Hack 5mm to 8mm Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 25mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws: 2 - 3mm x…
对于同一电机，2mm轴的成本为59元，而5mm轴仅成本为8元，简直不可理喻。我在互联网上找不到修改后的版本，看来我只能自己做一个了。 For the same motor, the 2mm shaft costs 59 yuan, and the 5mm shaft only costs 8 yuan. It is unreasonable. I can't find a modified version on the Internet. It seems that I…
Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…
D-Shaft Knob for Potentiometer/Rotary Encoder. Please remember to press Like if you download.
This design can convert a DC Motor shaft to a LEGO cross piece for you to use in your LEGO sets. The design is all parametric, so you can change all of its sizes and hole diameters to your needs. It is a very small and fast print! This…
You need to print two as they fit back to back, to make it easier to install and remove I wet sanded the back half to remove any layer lines which could cause them to lock up. Lock the camshaft drive belt pulleys together when removing…
General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. This single cylinder model has four valves, with an engine capacity of 30 cc. This model was designed in Tinkercad.…
This model is a part of the conveyor belt collection , but can be used standalone. Printing instructions: - Print flat Assembly instructions: - Press 2 M3 threaded inserts in the holes on the side - Use 2 small M3 set screws to secure the…
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Goals of this project: Making the rc car more accessible by using widely available parts. The original differentials were hard to get, and although alternatives exist, they weren't easy to find. The Schumacher belts were hard to get were…
This model is compatible with the lego system.
My 2 previous designs didn't work well when trying to compensate suspension and steering, as a matter of fact they are only suitable to compensate slight misalignment for normally aligned shafts. So I will only use them between the…
this page is still under construction :) More to come! Disclaimer: This model is limited by the strength of the 3D printed shaft (the "weakest link" in my testing). This is best for shredding small bits and pieces of paper or thin/brittle…
Hallo, ich habe diese Model entworfen. Es ist geeignet für jegliche Klopapier rollen.
I originaly intendend this propeller to fit for my DIY electric SUP-board motor but you can use it to drive what ever you want. this design fits on 10mm D shaft but you can easily modify the design to fit any other type of shaft. Keep in…
I wanted to use LGX Lite Extruder FDM case model by SIVIS, but I couldn't sand down the shaft. Therefore, I made a hole to allow the latch to move freely. rotation_distance 53.494165 gear_ratio 44:10, 37:17 Re-calibrate your own value for…
Caution: First off I am not responsible for any damage that may occur to your printer in attempting this mod. (not that this mod does any irreversible damage that can’t be fixed for under 5$) Secondly, this mod is for the base Ender 3 . I…
Few hours of printing, a bit more then 1 kg of PLA, 4 bearings, some bolts, nuts and washers. And done. Most tricky parts to print? All casings and combustion chamber. Main parts - Prusament PLA Galaxy Silver. Fan, turbines, stators, LP…
This model is compatible with the lego system.
this page is still under construction :) More to come! Disclaimer: This model is limited by the strength of the 3D printed shaft (the "weakest link" in my testing). This is best for shredding small bits and pieces of paper or thin/brittle…
Nema 17 Gearbox with 5mm shaft, fits GT2 Timing Belt Pulley. Remix of: http://www.thingiverse.com/thing:8460 Cover is in two versions with or without 4mm holes for M3 threaded inserts. Bill of materials: Nema 17 stepper motor M3 nuts 6pcs…
This model is compatible with the lego system.
This is a knob for the cheap rotary encoders (eg KY-040) with 6mm diameter, D shaped. Depending on your printer, settings, tolerances etc you can add a drop of hot glue for better fixation. The cross on the bottom is to help with bed…
This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…
I have had trouble with the original dogbones and joints binding on the Cramer RC Truggy when the suspension was extended and during sharp turns, resulting in cogging and snapped wheel joints / dogbones. This is a remix of the excellent…
Summary This fits rotary encoders with knurled-type shafts. My Voron v0.1 screen didn't have the standard notched type of shaft, so I made this knob for it. I think it fits the Voron aesthetic well. It's wide and low profile, so that…
This is a remix from this Knob which for some reason had a gap that made the whole thing very fragile and by default pointed in the wrong direction.
This is just a replacement knob I had to make for my home. The original one was broken...
I put the model together to be able to print it at once with my Anycubic Chiron. I have also replaced the head and machined in the eyes and alternatively you can opt for left or right mounting of the head. I also edited the feet so that…
Printed with PETG, nozzle temp: 240, bed temp: 90, recommend printing with supports so that the axle holes are vertical.
I discovered the RC Shock shaft pliers, designed by Luisom77 and printed it out. ( https://www.thingiverse.com/thing:4418072 ) I did so in PETG and regular infill. The pliers functioned OK, untill I needed them for something witch…
Stepper Motor Nema 23 length 41-115mm shaft D8
Ein süßes Schaf mit Herz in den Händen.
The parts can be printed without support with PETG, 0,4mm nozzle, 30% infill and 6 contours are recommended for better stability. For own shaft connections the coupling is attached as *.stl and *dwg file. For non-printable parts, 4 M2x6…
This coupler is 20mm in diameter on the flat surface that screws into the object being acted on and 5.8mm diameter for the shaft insert hole. Meaning your shaft should be less than 5.8mm in diameter.
The original bowl is 590 mm in diameter, so I uploaded a smaller version, and one cutted into pieces too. If you printed it out don't forget to upload a make. If you need some changes (f.e.: different colors differnet pieces) then don't…
Adjusting Ring / Shaft Collar 8mm, 10mm using a M3 Nut and Bolt. Choose a 12mm bolt, 10mm may be sufficient. The 8mm one will fit around TR8 / T8 Spindle like shown in the picture. Print instructions Category: 3D Printer Parts Summary…
Build Mod Hack 5mm to 8mm Tall Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 37.5mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws 3 -…
Features: 4 slots main shaft with 30 mm (diameter) 19 mm (diameter) secondary shaft with 20 degrees inclination SUNLU SPOOL ADAPTER
I made this specifically to replace broken nocks on my 30 inch aluminium arrows by Man Kung ( https://www.mankung.com/webshop/bolts-and-arrows/detail/42/man-kung-30-inch-aluminium-bow-arrow.html ) but they might fit other brands, too. I…
This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…
With this custom 120° crankshaft you can build a straight 3 cylinder or a V6 engine with an even firing order. for a complete crankshaft you need 3 custom 120° crankshaft pieces and 3 regular crankshaft pieces which you can download…
This was my favorite manual trans that I could find online, to 3D print. But it isn't the smoothest. The crank was just a square, so the clutches rotate with it. Bu t the round holes for the output gears, through a square peg, made it…
I designed this Cover for the shaft of my R5 base for storage. Simple design that prints easily, Recommend orienting with the text on the buildplate, designed to print without support.
This is a ball-bearing axle that fits in the Polymaker PolyDryer dry box to reduce the friction when feeding TPU and other sensitive filaments. I found that the cardboard spool on my Siraya Tech 85A TPU tended to hang up on both the…
I made this propeller for a fan project (maybe coming soon ;) ) ! It's really blowing, not as much as a hurricane of course, but it's working ! It would be nice to see some makes ;) !
When taking a break from paddleboarding to swim or relax in the water, paddles are often left resting on the board. If not properly secured, they can easily slide away or be lost. These paddle retention clips are designed to keep the…
I used Prusa-slicer to alter the original design by NotLikeALeafOnTheWind. I needed something that I could actually hold onto to stall the motor easily. Quick Print under 10 minutes.
Overview: This customizer can generate a shaft coupler that accepts a shaft (female) or acts as one (male) on either end for a variety of shaft shapes (hex, square, round (with set screws), and round with one or two flats). "Sleeve" mode:…
I wanted to fletch some heavy 1/2" diameter crossbow bolts of approximate medieval design. Having no goose feathers on hand, I figured a 3d printed one could be a decent alternative. Upon searching I found a cool idea by Tal84:…
Print with supports
2-blade boat propeller, 2mm shaft
Use this to extend Geared BO motor, that comes in cuboid package, the shaft will fit tight, also the tyre can fit tyre on the other side
Getestet in Polymaker PolyTerra PLA+ grau, rot und grün. Vermutlich wäre PETG besser geeignet. Ich hatte aber die benötigten Farben nicht.
This 2 piece clamping collar can be be customized in F360 to a wide range of dimensions. The geometry is tied to parameters for easy modification to suit the job at hand. It is made of two symmetric halves, so once you save the STL, be…
My late Mom's old Panasonic table radio needed its volume control (with integrated power switch) replaced. The replacement parts would apparently be considered vintage now, but Philmore sells an appropriate value pot with an integrated…
This model includes the following objects: A bar that holds router bits at an angle and that can be screwed or glued to a base plate. Lengths: 200 mm (7 bits) 250 mm (9 bits) 300 mm (10 bits) 340 mm (12 bits) A 6mm insert An 8mm insert I…
There are two files, the first is the holder for the flexshaft handle, you can fix it to a wall with two screws or glue, the second is a clip for the shaft itself, you can print as many as you want, but i think one is enoutgh for holding…
Lego Technic wheels (rim part number is 56145) to use with 4mm D shaft (4/3.5mm). This rims can be used with: Lego Tyre Normal Wide Ø43,2 X 22 (part number 4184286) Lego Caterpillar Tracks (part number 4502834) We can generate rims for…
Edited the shaft so that it works with small ~1.5 cm (~0.6 inch) rubber bands. Works great. Thanks to @LukasCenovsky for doing all the hard work and then sharing the scad file to make this possible.
Props show the emitter head and middle part, Discovery_Phaser_Mods_-_4_emitter_4, rotates. Did a quick part sketch using Prusa Slicer cylinders. This is why you have to open the 3mf file so the negative volumes will create the holes in…
This is an adapter for 3.125mm to 5mm axles. To print it I recommend to start with default settings and increase/decrease flow depending on how well it fits (optimally it wouldn't have any noticeable play). There are three versions: Just…
I needed a replacement but all versions I found wasn't the real form factor I needed and that's why I created my own. There are 2 versions: knob_full.stl full knob for printing in one color knob_mc_base.stl knob_mc_indicator.stl…
This crankshaft locking tool allows loosening and torquing of the crankshaft pulley bolt at the front of the engine. This bolt needs to be removed to perform the belt service. This tool should be printed with thick walls and at least 80%…
Pressure fit potentiometer knob for a potentiometer with a 6mm shaft Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: 3d Jake PLA Notes: Depending on the bedadhesion you…
This model is a remix of the original design by Avionix . Many thanks for sharing the model and making this remix possible. This remix introduces two small adjustments compared to the original model: The shaft length has been reduced by…
