P
PrintablesRenji Ip
Playseat Challenge X MOZA HGP Shifter
m5 30 x4 m5 nut x4 m6 25 x2 m6 nut x2 m8 30 x1
- Pobrania
- 170
- Polubienia
- 16
- Ocena
- 0
Wyniki wyszukiwania: hgp
20 modeli
P
PrintablesDaniel Kouba
Moza HGP Shifter mounting holes
Moza HGP Shifter mounting pattern for drilling
- Pobrania
- 122
- Polubienia
- 15
- Ocena
- 0
P
Printableslautaro
MOZA HGP Shifter Desk Clamp
English Description Compatibility & Hardware: Desk Thickness: This clamp supports desks from 2.5cm to 4.5cm thick. Hardware: You will need (4x) 1/4" x 1 1/2" screws (or M6x40mm) to mount the shifter to the bracket. Materials & Print…
- Pobrania
- 113
- Polubienia
- 14
- Ocena
- 0
P
PrintablesBent Derailleur
MOZA HGP Shifter Handle
If you don't like the stock round metal knob and want a more traditional styled “handle” for your H-shifter. Here it is! Personally I don't like the round one and also the metal makes it cold to hold, a plastic one feels better. Height is…
- Pobrania
- 105
- Polubienia
- 6
- Ocena
- 5
P
PrintablesBent Derailleur
MOZA HGP Shifter sequential mod
If you want to convert your Moza HGP shifter from H-pattern to sequential this is an easy way. Also easy to remove when you want to cruise around with normal H-shifter, just lift off. Requires my mounting bracket , to get the bracket…
- Pobrania
- 87
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBent Derailleur
MOZA HGP Shifter sleeve
Spare sleeve for the MOZA Racing HGP shifter. This is the part that grinds to the gates. Print instructions: It is probably a good idea to use a brim to make it sturdy Mount instructions: Unscrew the knob and the first shaft (that one can…
- Pobrania
- 79
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBent Derailleur
MOZA HGP Shifter mounting bracket
If you want to mount your shifter from top instead of bottom you can use this mounting bracket that uses the original screws. Extra material needed 4x M4x20 (optional, but I think the original screws are a tad too short) 12x 12x20…
- Pobrania
- 58
- Polubienia
- 9
- Ocena
- 0
P
Printablesmaverickagm
Moza HGP Mount for Playseat Challenge
I made a Moza HGP shifter adapter for the Playseat Challenge Universal Mount. There is an angle adjuster so you can make it parallel to the floor. 1) Print as oriented in model 2) Use 4x bolts, nuts and washers around perimeter. This…
- Pobrania
- 44
- Polubienia
- 7
- Ocena
- 5
P
PrintablesDaniel Kouba
Moza HGP Shifter - Sequential Mod
This works flawlesly. you need just 2 pieces of D30mm x 10mm rubber https://www.kaufland.cz/product/435437096/?kwd=&sour
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBent Derailleur
MOZA HGP Shifter Plunger Elastomer
Your MOZA Racing HGP Shifter might get loose and wobbly. That is because MOZA have put bad plungers in there, the springs brake! But there is an easy fix for that. Either replace plunger (or the springs in there), or print new plungers…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBent Derailleur
MOZA HGP Shifter mount grommet
Need to mount your shifter on wood instead of some metal rig? Then you might want to use regular wooden screws and then you need some grommets (washers) to make it fit good in the big slotted holes. Print four of these and attach with…
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSumofThis
Mount for 2013 BMW X5 and X6 Carpuride Head Unit C94 AISN B0DHGPQDK7
This is a dash mount for the $79 Carpuride C94 ( https://amzn.to/48iGrer ) 10.26 ASIN B0DHGPQDK7 for a 2013 BMW X6 (should fit the X5) that I made for a friend. It sits in the factory cubby and holds the Carpuride head unit in front of…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBrandon Swain
Moza HGP shifting mount CHALLENGE FOLDING SIM RACING CHAIR
Custom 3D-Printed Shifter Mount for Playseat Challenge – Perfect Fit for Moza Shifters! Upgrade your sim racing rig with our custom 3D-printed mount, specifically engineered for the Playseat Challenge. This mount is designed to attach…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printableseksb
snap switch adapter for Moza Racing HGP Shifter
You need one insert, 6 wide switch brackets (black and purple in the photo), and 2 narrow switch brackets (yellow in the photo). Parts: (8) Omron SS-5GL2 snap switches Arduino Nano ESP32 (18) M3x8 socket cap screws (18) M3 heat set…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPapuli76
Moza shifter HGP plate with optional insert
Moza HGP shifter plate
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
PrintablesYanis Delessert
Moza HGP shifter plate for gear shift cover
How to install : 1. Unscrew the four screws on top of the shifter that hold the aluminium plate. (IMPORTANT, keep that plate on) 2. Unscrew the shift knob. 3. Install your cover. you may have to cut it because in general it's going to be…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPapuli76
MOZA HGP Sequential Shifter Mod
Plate that turns your HGP shifter to sequential shifter. 3d print and add 3x 18 mm/3,5 mm O-ring. You can better size of O-ring for your likeing.
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
Printables
Moza HGP Mount for Playseat Challenge
I made a Moza HGP shifter adapter for the Playseat Challenge Universal Mount. There is an angle adjuster so you can make it parallel to the floor. 1) Print as oriented in model 2) Use 4x bolts, nuts and washers around perimeter. This…
P
Printables
Moza HGP Shifter - Sequential Mod
This works flawlesly. you need just 2 pieces of D30mm x 10mm rubber https://www.kaufland.cz/product/435437096/?kwd=&sour
P
Printables
snap switch adapter for Moza Racing HGP Shifter
You need one insert, 6 wide switch brackets (black and purple in the photo), and 2 narrow switch brackets (yellow in the photo). Parts: (8) Omron SS-5GL2 snap switches Arduino Nano ESP32 (18) M3x8 socket cap screws (18) M3 heat set…