Liczymy pasujące modele…
Important announcement: I released version 2 of the multiconnect system for multiboard . This version is fully compatible , but also incorporates some handling and versatility improvements. I recommend to always print the new versions.…
Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…
About: Want to attach your existing gridfinity bins to your new multiboard wall or just use the existing containers you already printed? This is just the right solution for you. Just download some multiboard connector , connect it to your…
I love the design of the Creality K1 printers. The unibody frame with the beveled edges and corners is just awesome. There are already a lot of risers for this printer out there, but this one extends the original frame of the K1 / K1C.…
Update ****** Additional Version to add Multiconnect version from @DavidD V2 - Multiboard Multiconnect Caliper Holder Layer: 0.20mm Infill: 15% Support: Yes (Lines) Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: V1 -…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Hexagon plates for K1/K1C Unibody Riser Frame . It is a two parts print that should be gluwed together. The plate has clips so you do not need to glue it onto the Unibody Ricer frame. Update 2024-09-28 : I made it easier for you to create…
Wind Turbine inspired by the Liam F1, using fibonacci sequence for the blades. Leaves in a fibonacci pattern in plants maximise the area for photosynthesis and minimise the amount of blocking overlap. The same prinicpal can be applied to…
I did not like any of the parametric golf balls I was able to find, so I designed my own. This uses the fibonacci lattice to distribute points on the surface of a sphere in a relatively even way. The included STL has a diameter of 42.7mm,…
Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system. Note: You may also like the open bins I created, which allow easy front access. Also you…
This Hook is inspired by piesupplies' Desk Bag Hook ( https://www.printables.com/model/1453-desk-bag-hook ) The Fibonacci Hook is based on a Fibonacci Spiral and is completely customizable. It fits different desk thicknesses and you can…
LED-Frame 2.0 for IKEA SKADIS pegboard 🚀 FINALLY I can share the multi-board version of my LED-Frame. It's controlled by an ESP32-Controller running WLED. The frame is divided in smaller segments, so it can be printed on smaller printers…
In addition to my Multiboard “ Bosch Go Holder ” the Bit Holder. Version 2 also available now. Length reduced to 124mm to be able to mount two holder right next to each other. If you like what I do feel free to buy me a …
A mount for a tape measure or anything that has a belt clip. This works with multiboard . It uses the peg holes. Print in the following orientation with outside brims on. No need for supports.
I'm building out my multiboard and I like the weight bearing snaps as they feel the most secure for my setup, so I put this one together and am pleased with how it turned out Details: Elegoo Neptune 4 Pro 0.6 mm nozzle 15% infill 1.2 mm…
First set of Sonic figures based on Team Sonic. Set inludes · Modern Sonic (SSBU Pose) · Modern Tails · Modern Knuckles · Super Sonic (SSBU Pose) (Don't have pics sorry) · Super Sonic V2 (Original Pose) All my figurine models will always…
Snaps for screwing tiles directly onto the wall. Prints without support I tried using the (old) original parts, which are designed for mounting tiles directly to a wall, but the screw-in fasteners turn when you fasten the screw, and they…
Do you like the Cable holder ? Then here you have a remix with a few improvements! This remix brings several modifications that improve the original model: Several size options Rounded edges of the model (the original model has sharp…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments 2024-06-08 Update: I've added a 2nd version that uses Small Threat T-Bolts to attach to the Tile. This May be an alternative if you…
Te used with the www.multiboard.io system A small and strong screwable hook to be used in the Multiboard pegboard holes. The hook is printed sideways to make it very strong. Orientation The orientation of the hook will vary depending on…
Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system. This is a variant of my normal bins to allow access from the front. Howto use: You will…
Multiboard screwdriver holder/shelf, robust design scaled for maximum volume of ender 3. Shelf is prepared for multiboar system: www.multiboard.io I also added support for more rigidity. V2: 7mm storter for better fit on Ender build…
This is a multiboard compatible hammer hook I designed to use the standard multiboard pegboard click. This should hold any standard hammer. I printed at a 45 degree angle to give all sides a consistent texture with tree supports.
Hinges option for Creality K1 / K1C Unibody Riser https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Uodate 2024-10-20: Redesigned hinges for new version of the frame. Update 2023-07-14: I have updated this model.…
For the Multiboard Storage System. The cutters fit standard filament cutters (Creality) or pointy nose pliers. The wire strippers fit the ones in the picture. It may or may not fit a different brand.
A remix of a scissor holder Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15%
I have an insider corner above my workbench where I am putting up a multiboard. I couldn't make any of the premade brackets work for my needs, so I made my own. These are working for me and can be seen in the attached images Updated…
Dual Wire Cutter/Plier Holder for the Multiboard -Added a single cutter/plier option Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15% No supports
Pen/Pencil/Tool Cup Holder Multiboard Push-Fit Mount
Plier Holders for Multiboard, prints without support
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. This is version 2…
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. For new models I…
Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15%
This set includes the following sizes: Mini hook (25cm) Standard hook ( 50cm diameter) - great for Cricut vinyl rolls, wrapping paper, compost bag rolls, hammers. Grand hook ( 75mm diameter) - I use these for larger vinyl rolls, silicone…
I couldn't find a plain stackable bin that fit the multiboard holes, so I made my own. The bottom is rounded to make for easy scooping I optimized the wall thickness for least material / strongest part They are stackable 3 sizes:…
Generic connectors to hang your bins/shelves or anything else to your multiboard. The connector is pretty generic and allows you to attach anything you want. This is the version of multiconnect optimised for usage with Underware and the…
It fits perfectly on a 8x4 Board or just like me 2x of them on 8x8. It's designed to use the Board connectors @ the edges to increase efficiency of the build. During the time I've collected too many Bits! That's why I've had to do this. I…
This is a remix of "Screw Driver" by megatron321 ( https://www.thingiverse.com/thing:709811 ) 0.2mm quality No supports needed if printed vertically This screw driver has been adapted to drive MULTIBOARD bolts and T-Bolts. After…
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
Updated with hole for hanging. This tool helps removing Multiboard snap fit inserts. It consists of a medium thread with a handle that can be used to leverage the snap insert out.
Note : In the pictures, the feet are on the top instead of the bottom, I fixed that in the model after realizing that they where feet and not just connecting pegs! Fusion 360 redesign of the Chipp Walters' drawer system design (just the…
I lost the files for my original Sans figure so I thought "might as well do it all again" No special print instructions, I'd print it around 3 inches but aside from that go nuts. Will update with photos when done painting All my figurine…
As seen on X and YouTube: Designed for use with the Tang Band W3-1876 woofer, and the GRS A25-2T tweeter. Usable overall bandwidth of 50Hz - 16kHz in the nearfield; ideally against a wall. Tang Band W3-1876S 3" Subwoofer:…
Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system. Note: This is version 2 of my multiboard bin system . Differences from the first version…
There are 3 models with different attachment types for the Multiboard. It can be used for tape measures and safety glasses. The snap need to be printed with supports. There is also now a thicker version for heavier tape measures Credit to…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Simple headphone holder for Multiboard. Needs a large thread screw to mount.
Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…
Since the new Flush Snaps are a little flimsy, it can be difficult to push them into their Multiboard counter parts - especially if you chose the tighter versions. So I made this little tool to help with that. Print settings I print these…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
The ultimate screwdriver holder for #Multiboard! Holds 12 screwdrivers in the main holders, plus has slotted holes for inserting extra smaller screwdrivers, and a front rail for tweezers, pliers etc. I don't have much horizontal space so…
Umarım beğenirsiniz, yorumlarınızı ve silinenlerinizi paylaşmayı unutmayın lütfen :)
A remix of DanPDK Quick-change Paper Towel Wall Mount holder allowing for it to mount to multiboard walls Requires M3x20mm bolts X2 as hinges for the flap
The Tilable Tilt Box , a practical and compact storage solution designed to attach seamlessly to Multiboard system . This box is perfect for organizing and storing small components, keeping your workspace tidy and efficient. NEW: The new…
A Voroni AA and AAA battery dispenser modified to mount to Multiboard. You'll need to add a Drop-In Nut Snap and two M4 screws to connect to the board.
Gibt hier nicht viel zu sagen. Das sind die Zahnräder von der Tchibo Esperto Pro Brüheinheit. Drucker Bambu Lab X1C 0,2mm Layerhöhe 0,4mm Düse Material PETG Stützen “JA” Wenn ihr das gedruckt habt dann würde ich mich über eine Bewertung…
Made sides wider, stronger and with angles to easily slide on the tweezers. Also, it prints horizontally and has an easy grab to remove it. To attach to a multiboard, either push it into one of the tile connectors like I did or use one of…
Just printed out and hung my Multiboard. I found this really nice Deburring Tool Holder from Brad @FTBT 3D but it was for the HSW so I made a version like it in OnShape but with a peg that fits the Snap Connector on the Multiboard. I have…
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…
A simple allen key holder for multiboard . Sizes: 10, 8, 6, 5, 4, 3, 2.5, 2, 1.5 mm. Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you can quickly remove it from the…
Click in a scissors holder to your Multiboard wall. Easily pull the holder out to move it to a different location. Works with lots of different sizes or scissors! Requires a Multiboard Snap to click into:…
A remix of the Multiboard Push-Fit Caliper holder to directly use the official multiboard remix snap fitting. I found the push fitting to be too loose for my preferences. By using the snap fitting directly, the caliper holder is solidly…
Just a very simple shelve with a size of 6x3 of the multiboard grid (15cm x 7,5cm). How to use: You will need at least one multiboard connector for each edge of the shelve, but may use as many as you like. Connect those to the multiboard,…
I've encoperated most of the face into the mask which I think gives it a much meaner appearence. Still it is an untested print and sizing and fitting correctly may be a whole different thing. Print instructions Category: 3D Printing
Multiboard and Honeycomb Storage Wall holder for tape measures with a belt clip. Print upright without supports. Updates 23 Apr 2023: Added version B with unneeded material removed. Just choose whichever looks better to you. 03 May 2025:…
With the build of my first Multiboard I was tired of "Draw - Deinstall - Drill - Install - Screw - Draw - Deinstall - Drill - Install - Screw - Draw - Deinstall - Drill - Install - Screw - Draw - Deinstall - Drill ..." And the holes 90%…
Die Halterung für M12 Akkus von Milwaukee ist für die Nutzung mit dem Multiconnect System von @DavidD für Multiboard gedacht. Es gibt ein Modell für die kleinen und eines für die größeren Akkus. Beide Modelle sind so ausgelegt das sie…
Want tape holders that are easier to print and stay put? These use the t-bolt multiboard screws as a base and extend them out 75mm or 100mm to hold rolls of tape. They're nicely secure and don 't droop.
Remix of the 9mm small thread flathead t-bolt for Multiboard to allow for knub which can hold a ruler with a hole. https://www.multiboard.io PLA+ 0.2 Layer Height 3 walls 15% infill
New: I made a new version of all 12 shelves with a back with Bolt Holes for the Large Multiboard Bolts. I use the 9mm Flat Head . You can use longer if you have your tiles spaced from the wall. These will hold a lot more weight then the…
Slicer settings and other info: 0.4mm nozzle 0.2 layer height PLA Supports enabled (tree supports) 15% gyroid infill Holes centers are placed 30mm apart for the big mount, and 25mm apart for the medium sized one. All files are available…
Not even finished the printing of my first Multiboard, but already made a first holder … Don't wanted to print bins I already have ... So I made this holder for this bins (Amazon Germany): https://amzn.eu/d/iyvn6eo More infos about the…
Highly collectible 3D printable NFC tokens for use with Nintendo video game consoles. Designs for all 91 amiibos in the Smash Bros. series. Note: Prints in one part! You're expected to insert the NFC tag halfway through the print. No…
Tried most Gridfinity Multiboard shelves and was unhappy. Either poor fitting, too much material required or lack of magnet support. Found the Gridfinity Refined models perfect and decided to remix them with pegboard clicks, so no bolts…
As seen on YouTube: Dayton Audio ND25FA-4: https://www.parts-express.com/--275-059 Dayton Audio TCP115-4: https://www.parts-express.com/--295-415 Dayton Audio XO2W-3K: https://www.parts-express.com/--260-144 Screws:…
If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated! I'll be looking forward to interact with you guys and our shared passion for making! :)…
Overview A parametric re-imaging of Horacio 's excellent HSW Cutter Holder which allows you to fully customize the inner dimensions (height/width/depth) of the holder, choose the variant style and the number of slots, and pick the…
This is small quick model needed for myself. First intension was to print a ready model, but as it happens, best one I liked a little bit didn't met my taste. The models (which was already a remix) author made it with attached Multiboard…
This simple bin can easily be attached to your multiboard using the multiconnect connector system . I would recommend to at least use 4 connectors, one for each edge. Note the bin is using an optimised “quick change” version of the…
A simple addition for Multiboard to store your small pliers. I use mine “upside down”. This gives the best friction to the pliers so they stay in place. I printed mine with PETG, 0.4mm nozzle and 0.2mm layer height.
Simple / minimal multiboard tool holders in various sizes. Width 10 - 75 mm Depth 10 - 25 mm Use the parametric Autodesk Fusion fusion model for other sizes. Requires one of the Multiboard Snaps to click into. Recommended print settings…
This is a caliper mount that is easy to print and attaches to a Multiboard pegboard/small hole using a T-Bolt.
I made this as a joke some years ago when there was a craze of doing these gnome models as a test. Given Prusa gives out the gummy bears, I figured it would make an appropriate test model :D There are 4 files included in the package. The…
Remix of the modal to fit the multiboard plates properly. PS: The hooks are designed to be fit tad bit loose
Setting up my Multiboard I was not able to find any toolholders that fit for the tools I want to use it for, but I found a very good gridfinity shelf made by user David D here on Printables that had a nice and stable way of hanging on to…
Slicer settings and other info: PLA 0.4mm nozzle 0.2 layer height 15% gyroid infill Supports enabled Brim highly recommended Inner dimensions (W x L x H): Small slot: ~36x73x100 Big slot : ~46x86x100 XL slot: ~54x92x100 The light blue big…
Can't find a good compact set of holders and bins that can be securely mounted to my multiboard ( https://www.multiboard.io ), so I created my own version with a special universal fixation bolt (a modified version of the multiconnect bolt…
Designed to allow quick and easy storage solutions for use with the Multiboard system with the following design objectives: Parametric Box or cylindrincal Honeycomb pattern to match multiboard asthetic Use two peg board holes for…
Overview A complete print in place paper towel holder for the Multiboard system. It will require four snaps . Push-Fit, Bolt-Lock and Pegboard Click options available. It's a good idea to have access to the back of your board if you use…
Simple cable tie holder to use with Multiboard
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This space saving battery dispenser for the multiboard is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. A pattern on the sides of the magazine makes it easy to see how many batteries are left. A drawback of this design is…
This is a Multiboard hanger for the Vise Grip automatic wire strippers, inspired by “HSW Vise Grip Wire Stripper Hanger” from Tom Nardi.
V1 - untested - 2x3 and 1x2 Gridfinity Baseplates adapted to Multiboard system - untested - tested: 2x4 Printed in clear resin it fit too loosely into the Multiboard octagon tile, but with a bit of glue it now holds a 600g bluetooth…
Remix of the Filament Cutter Holder or Needle Nose Pliers to work with the Multiboard system. Layer: 0.20mm Infill: 15% Support: None Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: 3
A custom made paint bottle holder for the Multiboard system. It is designed to be mounted using two small T-bolts and has a capacity of 24 dropper-style bottles up to 25mm in diameter like those from Vallejo, Army Painter, and other hobby…
Spiral Vase Mode - No Supports. Simple shapes combine with the equation of nature to create fun trees. Loosely based on learnings from this model
Having printed the original NebulaNoob model as a 20cm tall statue I found major issues with the insides of the model that made printing take way more time and in general produce less pretty results when printed at a larger scale, so I…
This is a small driver that helps you screw in those pesky T-bolts! Designed for the shorter heads, but will work with the longer ones.
