217 modeli
5% to 10% infill 0.1 to 0.2 mm layer height Some tips: For more force in poses try skirt 2-3 outlines (2-3 layers). Too Stiff joints: Negative horizontal expansion is recommended (-0.01 ; -0.02) or more. Too Loose joints: Positive…
[Update] ---2025/10/25--- ・Changed the support for the head model to brim type. --------------------------------------------------------------------------- This is Flexi Liopleurodon. The body, which is made in reference to spherical…
Easy to print, upscale as needed, useful as a penholder or planter. A brim is recommended.
Easyprinte new desktop infective bestfriend :) The capside is a icosahedron. You can print allthe parts serparatly 6 legs 1 body 1 Capside It shouldn't need any sandind, with my crappy (but lovely) 3d printer i needed a bit of sanding…
The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…
Maturity Very Good 12 prototypes. In use since 2023/10. Model design from scratch. Hardware Hat spacers are 11mm height (as Adafruit quotes Nigel Tufnel's “These go to eleven”). The part “PiAndHatCase-rxx - Entretroise” is if you missing…
Bacteriophage made as practice in tinkercad. Works well, do use adhesion.
A simple, articulated, and print-in-place T4 bacteriophage modeled after the real-life attachment process of a bacteriophage, with legs that bend to allow the phage baseplate to reach the cell surface. A great desk toy or learning tool…
Bacteriophage-Virus Bacteriophages, often called phages, are viruses that infect and replicate within bacteria. They are not animal or plant viruses, but rather viruses that exclusively target bacterial cells. Bacteriophages are composed…
ASIAIR mount for CEM26 stock tripod (not literock). Made for my ASIAIR Plus but should work with any similar dovetail. Remixed from the following two models: https://www.thingiverse.com/thing:5235482…
A Bacteriophage is an incredible virus that looks like a robot. It has 6 legs to land on a bacteria and a syringe in its core axis to inject his dna (or is it rna?). This model has 6 legs that you can articulate (remove the built in…
A model of the Triop Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original…
Clip-on glasses shooting blinder and diopter You'll have to drill the hole of the diopter , mine is 1.5mm Dioptre et cache oeil à monter sur lunettes. Vous devrez percer le trou du dioptre au diamètre que vous voulez.
This is a case for the Calliope mini 3 including diffuser for the LEDs. Its recommend to use dark colors (black, dark blue, …) for the top cover to avoid shinning of the LEDs through the cover. The case can stay at Calliope permanently…
In a mountainous region in the heart of Ethiopia, some 645 km from Addis Ababa, eleven medieval monolithic churches were carved out of rock. Their building is attributed to King Lalibela who set out to construct in the 12th century a ‘New…
UPDATE: I have been using this pier adapter continuously for over a year and it has been outside mounted in all conditions, including Michigan winters. It works well. However, I recently bought another iOptron pier and another ZWO PE200…
Print in place, with brim. No supports. If you print it in Z axis scale 60 mm, than it is 300 000 times bigger than the real one.
This is a model of a bacteriophage for display purposes. It probably isn't super accurate but it makes for a nice display. What is a bacteriophage? A bacteriophage is a type of virus that can infect bacteria and archaea. In their “head”…
EN A cover to protect the diopter with iris aperture of the Stgw 90. The carrying strap can remain mounted. Note: Please pay attention to the print orientation (see image 4). DE Eine Abdeckung zum Schutz des Diopters mit Irisblende des…
The knob should fit just about perfect on the shaft if the measurements match. You can find shaft hole specs in the pictures. The diameter is 47.3mm. I found the settings in the project file to have the optimal settings for PLA including…
The DJI goggles 2 comes with a lens protector, which didn't fit in my goggles after I change the foam to a softer one and added diopters. I therefore created a simple lens cover that worked well with the new foam on the goggles. It can…
Ich habe eine Halterung für die Eheim Innenfilter Powerball und Biopower entworfen, da die Originalhalterung bzw. die Saugnäpfe mit der Zeit nicht mehr halten. Die Halterung besteht aus zwei Teilen, die dann ineinander geschoben werden.…
13in tall Heliopolis Library Pedestal Prop from Stargate SG1 episode “The Torment of Tantalus” I remixed this from a 3D model by "Ksst" that I found on Google Sketch-Up 3D Warehouse.
It is a rugged box perfect for storing the Calliope Mini. You need six M3x30 Screws.
Two parts adaptor for lenses M39x1 with lock ring for Durst Enlargers. Simple to print without support, also you can glue it together but its not necessary.
This is a space efficient box for the iFixit iOpener repair kit. Keeps your repairtools neatly orgainzed. I added the iFixit logo to the lid using an svg in the orca-slicer (also included in the 3mf file). The lid just clicks into place.…
(Deutsche Beschreibung unten) This is a case for the Calliope mini one-board-computer planned to be used in German primary schools. ( http://calliope.cc/en ) I wanted a case that can stay on the Calliope permanently, but leave the pads…
The Concept of zackfreedman's Ultimate Harbor Freight Parts Organizer is outstanding. However, in Europe you usually get other, but similar small parts drawers, like the Allit Basic 33 which is available as a white-label product like Aldi…
A simple, articulated, and print-in-place T4 bacteriophage modeled after the real-life attachment process of a bacteriophage, with legs that bend to allow the phage baseplate to reach the cell surface. A great desk toy or learning tool…
just for science or fun?
I created this seedling tray because i could not find locally more seedling trays. I made it like this after some documentation found on the internet. Print instructions Printer Brand: Prusa Printer: MK3S+ Rafts: No Supports: No…
This is a simple faceplate for Allit VarioPlus Drawers with a label holder. It prints without supports Word Template for the labels can be found here: https://drive.google.com/file/d/1y9XjPjgdDIksTxmiEPsqvJ6FYKTuZU6Q/view?usp=sharing…
Slim stand with battery holder for Calliope Mini ( https://calliope.cc/ ). Can be disassembled for easy transport. Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes Resolution:…
This allows you to put custom inserts into the Walksnail Avatar Goggles L. The screws are M1 screws. In the photo, I glued the lenses of my old glasses inside with double sided tape, which works very well for me. Nevertheless, I created…
T4 virus model, you can use pvc pipe for the legs, the entire model height its 1 meter. You can use the hole in the top part of the head, to put some wire emulating the virus RNA Category: Biology
The iOptron CEM40 telescope mount ships with the 8407+ handset, but does not have a holder, so it just dangles with no place to attach it. To remedy this, I designed a holder for the handset that attached to the tripod leg (2 inch…
Cassiopeia constellation Keychain. If you print it in one color, it looks good. If you print it in two colors and use a natural or translucent filament as a base, when you illuminate it or place it in front of a light source, it will look…
T4 phage with 5 parts printed separately: capsid, base plate + sheath, collar, spike, and tail fibers. The sheath fits through the collar and into the capsid. The spike and 6 tail fibers fit into the base plate. The capsid can be printed…
As i constantly have a blurry viewfinder image because the diopter adjustment is misadjusted by my hands, my camera-bag etc. i needed something to prevent this annoying situation. Fits EOS 70d for sure, other models have to be tested. So…
Increased thickness by 70% for structural strength. Will need supports enabled.
Model (Diagram) of a bacteriophage microbe
Virus (bacteriophage) for studying biology.
Case for Volk 90 diopter and 78 diopter indirect slit lamp ophthalmoscopy lenses. You need two 10mm by 1.8mm magnets for the case to close securely. Print-in-place, make sure your printer has at least 0.4mm tolerance for the hinge to work…
I recommend adaptive layer height and fuzzy skin.
This is a template to create your own figurines for Faba audioplayers. These are great, because you only have to encode your files and write a code on the NFC tag. No need to buy content again, just digitize your old tapes ;-) No…
Backplate for the Calliope Mini (calliope.cc). Leaves every contact accessible (even the DIY soldered-on contacts) while isolating the back and giving some structural support. Stop while printing to add in two (2) M3 nuts. Fasten the…
A simple remix based on https://www.thingiverse.com/thing:2487428 Added some cutouts and changed the form to better represent the nice starform. The bottom is hollow and has a lid, so you can put your batteries in there. (I'm planning on…
I made a 6er divider for "VarioPlus Hobby 33" Small parts drawers. It works very well for small parts like m3-screws. Printed with Prusa mini + with PLA For the best printing experience: Print the mount with the basket as seen in the last…
Maybe I lost the dividers or they were not within the scope of supply. So I built my own. Note: All rights of the assortment photograph to Lidl/Parkside. Print Settings Printer: Voron V0.1 Rafts: No Supports: No Resolution: 0.2mm Infill:…
Since I couldn't find any flexi Triops model I diced to design one myself. This is in no way a realistic representation but rather a fun cartoonish looking adaptation of one of my favourite critters, the Triops
Einteilige Halterung für den Calliope Mini (alle Versionen) und das dazugehörige Batteriepack.
Diopter attachment for an Insta360 ace pro. I recommend screwing in/off the diopter while it is attached to the camera.
This remix of the original design by b2vn fixes two issues with their V2 version of the cover. after few months of using the cover, it becomes loose. It flips back by itself during calls with the slightest shake of the camera, especially…
The W&F diopter is mainly used for competition shooting. Most second hand sets are equipped with a ring insert but in my country this is not allowed for military rifle competitions. Original sets are expensive or unobtainable at all so I…
This remix fits the shotglasses I found in my local grocery store (see attached image). The shot glasses are glued down some transparent silicon (which should also make them removable if some cleaning is required). To clean, take care to…
Originally published here: 90 Antiope approximate shape scaled one in two million by tato_713 - Thingiverse This model was made using the data from Bartczak (2014), I just resize, soften and simplified the models using Windows 3D Builder…
Changed name from Virus to bacteriophage Category: Learning
Tiny Aquatic Critter Feeding Spoon: The Chosen One Are your Aqua Dragons demanding dinner? Do your Sea Monkeys seem sullen? Are your Triops trying to stage a microscopic coup over portion sizes? Fear not, benevolent owner of tiny things!…
I'd like to share my solution to the Mission 1's close focusing problem. I wanted something fast and easy to use that also worked with GoPro's ND filter set. Instead of making one adaptor and swapping the filters onto it, I designed a…
After using the 6 partition divider ( https://www.thingiverse.com/thing:3366249 ) and the 9 partition divider ( https://www.thingiverse.com/thing:2562803 ) successfully for a while, I had the need to divide some of the drawers of my Aldi…
This Stackable Container Collection comes in various sizes and offers versatile internal layouts. Containers snap into each other. No supports are needed. It also works seamlessly with the Allit VarioPlus 47 Basic wall organizer. The…
I find the design of the bacteriophage very interesting, just like a tiny spider! Also, rather simplistic. Could be usable on any material but i find it more suitable if made with TPU.
These boxes divide the normal container into smaller sizes to store several smaller items in the same compartment. The grid inlay ensures the boxes stay aligned and do not tip over in case that not all slots are filled with a box. To…
This is a great idea by Lamima , but that design was a little too short for my EOS 7D, so this is tweaked slightly. May be a snugger fit. Also incorporates a cutout to allow the pop-up flash to be used without removing the cover. Made…
The dimensions are entirely based on the original baffle. There's nothing wrong with it per se. My scope was purchased in late 2019, it already came with baffle extension, so no stray light issue. But I don't feel comfortable reaching…
Mount that holds iOptron powerbrick and attaches to LiteRoc 1.75" leg
Divider to seperate an assortment drawer into 9 small areas. Added some brim (inner and outer) to avoid warping. Printed in PLA. Original file from user ShapeLabs on Thingiverse https://www.thingiverse.com/__ShapeLabs__ .
quick and dirty: robust, stapelbar, multifunktional, für die Schule gedacht Die Box ist robust, ohne scharfe Kanten und stapelbar (sowohl mit als auch ohne Deckel). Die Boxen können mit einem Namensschild versehen werden und im Deckel…
Print the ring before the watering can body. To place it on the watering can, insert a pause into the gcode at 45 mm height. If you have a multimaterial setup, you can print the whole watering can in one go. The legs of the base need to…
Stapelbox für den Calliope Mini in der Version 3 (V3). Mir war wichtig, dass auf einen Blick erkennbar ist, ob die für mich wichtigen Teile alle enthalten sind, wenn Schüler ihr Set zurückgeben. Daher habe ich auf Deckel verzichtet. Das…
The "Akro Mils Divider (Small)" by DanielStein was to thick for my VarioPlus Original 75. So I've decrease the hight to 75%. It's quiet thin but works perfectly. Thanks to DanielStein for his work! Print Settings Printer Brand: Creality…
Aufbewahrung für den Einsatz in der Schule, schnelle Übersicht auf Vollständigkeit.
This a holder/flip for Nauticam Macro port and 2 different INON diopters. Features sunken nut casings. The diopter holders are customized for those I have. There is no guarantee that they fit for you. I highly recommend that you go to…
This is a rugged and well-sized enclosure designed for the Hiby R4 Pro DAP. All necessary files are included in the package for your convenience. Overview of the Design Process: Insert Modeling : The inserts for the battery and the Hiby…
Dobré na situace, kdy se pojistka rozbije, nebo chcete jinou barvu, než dodává výrobce.
Divider to partition the drawers of an Aldi / Allit VarioPlus Hobby 33 lengthwise. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.2 mm Infill: 100% Filament: DasFilament PLA Black…
I designed this to leave as much room as possible for the mini pc to cool. As you know, it does get rather warm while imaging. Preferable to print this model with PETG as it is more resilient to both, the atmospheric heat and MiniPC's own…
Just print how many tiles you want from @vioppoiv Pedalboard link: https://www.printables.com/model/562419-modular-guitar-pedal-board/comments and give it a little help with my support to put as many pedals as you like
Bacteriophage for biology class. If you want it bigger scale it in slicer. Use tree supports.
A sculpt of the extinct animal from the Middle Jurassic, Liopleurodon. This is a whole sculpt, you can split it in the slicer for easier printing and glue it afterward or print it whole with full support. Filament used in photo- Panchroma…
T7 phage with three parts printed separately: capsid, tail, and tail fibers. Tail fits into the capsid and 6 tail fibers fit into the tail. The capsid and tail fibers can be printed at 5% infill with no bed adhesion or supports. I…
Paranthropus aethiopicus is an extinct species of robust australopithecine from the Late Pliocene to Early Pleistocene of East Africa about 2.7–2.3 million years ago. However, it is much debated whether or not Paranthropus is an invalid…
1:1 scale model of a longiopteryx. The model features detailed feather texturing along the model. There are two versions of the files; standing, and posed. I recommend printing it at a finer layer height or with a resin printer. The files…
See gif below for use. Requires a 1.1 mm metal wire and 2x pen springs.
For now, it's the left leg, I'll make a right one later but so far so good.
Coperchio per ciotola tonda in stile terracotta. Possibilità di stampare la ciotola che si trova nell'elenco dei miei modelli creati direttamente al link: https://www.printables.com/it/model/880751-ciotola-bowl Terracotta style round bowl…
Maps of all countries are on Same scale to attach with each other to make world map.
Bacteriophage topper for Venusaur from other model
The light from Decathlon did shine too much so I made a cover. It is with slot for the charging port.
I wanted to print a headphone stand for my Hifiman Deva Pro Wireless, but there doesn't seem to be any models made particularly for it. So I turned to generic headphone stand designs, with my two requirements being (1) the headphones must…
Edits incoming: Small tweaks to the rail clamp have been made. New photos, pending reprint. Pic rail mountable fixed sights for nerf blasters. The front sight is 12mm shorter than the rear sight. This is to account for drop over distance,…
Printed in 95A TPU. It relies on frication to fit properly, the final dimension is critical, so the FreeCAD project file is also provided. You only need to tweak one dimension, highlighted below. For reference, my printer prints 0.4-0.5mm…
Small holder for the green trash bags "Bioposer" that are used in the small green trash cans distributed in Denmark. The model is large enough to fit a brand new roll, but it will not be able to spin around.
I didn't like to directly look into the (bright) built-in LEDs of the Calliope Mini (see https://calliope.cc/ ), thus I created this case, covering the LEDs with a single filament layer (0,2mm). I printed using white PETG. Probably it…
E.Coli from Rick and Morty (Bacteriophage) Body for 4 and 6 legs variants. Optional Pin can be used to connect Head , Neck and Body Use glue to fix parts Print settings: 3-5 walls 15-20% infill 5-8 bot/top layers
One of the fears of nurses doing endoscopy is that during the recovery of the biopsies, the flask may fall and you lose all the samples. With that in mind I designed the simple box that changed the way I work every day.
