P
Printablespastaoceanfrog
Skadis - Knipex Pliers - Electronic Super Knips
Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.
- Pobrania
- 1183
- Polubienia
- 147
- Ocena
- 4,83
Wyniki wyszukiwania: ipex
Liczymy pasujące modele…
P
PrintablesMacman1010
Knipex pliers holder for honeycomb storage wall (HSW)
I have created a parameterizable model that fits various water pump pliers. I uploaded two files that fit my two Knipex pliers. 1x a normal water pump pliers, 1x a fitting pliers. Here you can find an OnShape Link for easy editing of both…
- Pobrania
- 1097
- Polubienia
- 324
- Ocena
- 5
P
PrintablesLayerCake
Gridfinity Knipex Super Knips Stackable 2x4x3 Container
A stackable Gridfinity Container with an Inlay to store different versions of the Knipex Super Knips. Designed in two parts so you can reuse the container even if you get different Knips. The Inlay has some magnet holes on the bottom and…
- Pobrania
- 789
- Polubienia
- 208
- Ocena
- 5
P
PrintablesAaron
Knipex Snipper Holder for Ikea Skadis
This is a Knipex Super Knips holder for an Ikea Skadis pegboard. I remixed mweisshaupt's holder by adding internal holes to use CSD_Salzburg's Skadis Universal Hook (https://www.thingiverse.com/thing:2853257). Fusion360 file is included…
- Pobrania
- 679
- Polubienia
- 93
- Ocena
- 4,93
P
PrintablesPranks
Skadis Knipex pliers holders/mounts
I wanted a holder for the pliers with as little visible plastic as possible and came up with this. Not the most easy to print or economical but it isn't too bad. It comes in 2 different sizes: 34.5mm works for at least 70 02 160 and 26 12…
- Pobrania
- 661
- Polubienia
- 75
- Ocena
- 4,3
P
PrintablesGdschaf
Knipex Super Knips Gridfinity Holder
I wanted a place to keep my Knipex cutters and I couldn't really find anything. This sits on top of my 3D printer as I use these are filament cutters. I checked and this also fit with the cutters that came with my Ender 3 S1, just not as…
- Pobrania
- 565
- Polubienia
- 95
- Ocena
- 5
P
PrintablesMicha
HSW Knipex pliers holder (34mm)
This is a remix of the Customizable Knipex Wall Mount (VDE) and the amazing Honeycomb Storage Wall (HSW) fitting 34mm (width)Knipex pliers. I've provided two variants: HSW Knipex 34mm: This variant comes with the HSW clip mount directly…
- Pobrania
- 501
- Polubienia
- 55
- Ocena
- 4,8
P
PrintablesAaron
Knipex Pliers Holder for Ikea Skadis
This is a Knipex pliers holder (tested on 160mm ones; hopefully it works for other lengths) for an Ikea Skadis pegboard. I built it from scratch, but based it on Kevin's Knipex cutter holder, and uses CSD_Salzburg's Skadis Universal Hook…
- Pobrania
- 496
- Polubienia
- 48
- Ocena
- 4,9
P
PrintablesDaave
Gridfinity - Knipex Wrenches
This is a set of custom Gridfinity holders I made for a pair of Knipex wrenches I have. Knipex 86 05 250 wrench Knipex 86 05 180 wrench
- Pobrania
- 494
- Polubienia
- 144
- Ocena
- 5
P
PrintablesMeluniis
Ikea SKADIS knipex plier wrench holder
ikea skadis knipex 86 03 125 and knipes 87 01 125 holder, PRINTS WITHOUT SUPPORTS in under 30min INSTRUCTIONS: to insert the hook part, first insert one corner in the middle cutout then tilt it and push it in. while screwing appply…
- Pobrania
- 491
- Polubienia
- 74
- Ocena
- 4,75
P
PrintablesRene
Knipex Pliers Holder skadistnut
Modified this holder with a hole for 2.5mm screw. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards
- Pobrania
- 460
- Polubienia
- 60
- Ocena
- 4,86
P
Printablesmweisshaupt
Customizable Knipex wall mount (VDE)
I have provided some example models but it is best to measure the pliers and customize the design using FreeCad. The second picture shows how to measure it correctly. For customization open the project in FreeCad and select the object…
- Pobrania
- 440
- Polubienia
- 52
- Ocena
- 5
P
PrintablesClemi
T-Nuts Knipex Pliers Holder Ikea Skadis
I have designed this simple Ikea Skadis holder for Knipex and other pliers. The maximum plier dimension is 40mm and all my Knipex pliers are fitting great. M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the…
- Pobrania
- 429
- Polubienia
- 118
- Ocena
- 4,82
P
Printablesbstolk
Knipex pliers wrench jaw protectors (250mm)
Slide-on jaw protectors for the excellent Knipex 250mm wrench pliers. According to Sergey, also works on 180mm pliers when scaled at 86%. Although there are already some 3D-print models around, this was mainly a small project for myself:…
- Pobrania
- 424
- Polubienia
- 61
- Ocena
- 5
P
Printableswerz 99
Knipex Jaw Protectors
Jaw Protectors for Knipex 86 XX 250 and 86 xx 150. Print in TPU or PETG or even PLA. A little more flexible material may last longer. Update 29.3.2024: Added Fusion360 drawing on users request. Print Settings Printer Brand: Prusa Printer:…
- Pobrania
- 414
- Polubienia
- 74
- Ocena
- 4,8
P
Printablesluma
Soft Jaws for Knipex 180mm Pliers Wrench 86-XX-180
Print in PETG or TPU, the jaws are printed face-down so the gripping surface can match your print bed (use smooth bed for smooth jaws, textured for texture, etc). Geometry was 3D scanned from the tool for precise fit, this should easily…
- Pobrania
- 397
- Polubienia
- 51
- Ocena
- 5
P
PrintablesGieljan
Plier holder/rack (knipex)
Holder for your pliers. Designed around some Knipex pliers, but will fit other brands as well. With holes to hang on a tool wall. Some scale models of plier heads to glue on as decoration. Also made a model of the Knipex logo (don't use…
- Pobrania
- 384
- Polubienia
- 65
- Ocena
- 5
P
PrintablesJacker
Knipex Cobra soft jaws
as the original STL contains both sides but they not on the same level, I cut it in half to allow single prints as multiple objects are nasty when printing TPU. I added a TOP marker on the TOP part, as they are not interchangebale but…
- Pobrania
- 372
- Polubienia
- 60
- Ocena
- 4,8
P
PrintablesRainer
Knipex Cobra 300 Schonbacken jaw protectors
Schonbacken für die Knipex Cobra 300 Rohrzange. Am besten in TPU drucken.
- Pobrania
- 371
- Polubienia
- 63
- Ocena
- 5
P
Printablesmmackowiak
Knipex Jaw Protectors/Covers with Clips
Original design had very nice fit, but when printed with rigid material (ABS in my case), jaw protectors/covers were detaching very easily. I added retaining clips to both pieces, so they stay in place. Fits 150 mm Knipex pliers (86 XX…
- Pobrania
- 326
- Polubienia
- 53
- Ocena
- 5
P
PrintablesJack
KNIPEX plier Schonbacken
pads for plier (KNIPEX Cobra®) protective jaws (8mm)
- Pobrania
- 318
- Polubienia
- 109
- Ocena
- 4,5
P
PrintablesDaniel S
Knipex flush cutters cover 78 61 125
Cover to hold the pliers closed for storage. -Print in TPU standing on the opening. Category: Hand Tools
- Pobrania
- 312
- Polubienia
- 59
- Ocena
- 5
P
PrintablesHans Goudswaard
Gridfinity Knipex Super Knips 78 61 125
Gridfinity holder for Knipex Super Knips 78 61 125. Printed in standard PLA. Text was added later using Bambu Studio. Fits like a glove…
- Pobrania
- 298
- Polubienia
- 31
- Ocena
- 5
P
PrintablesDarragh
Knipex Pliers Wrench jaw covers
These are a set of protective soft jaws for the smallest Knipex Pliers Wrench (model number 86 03 125). If you work on delicate items such as electronics you can use these jaw covers to protect whatever you are working on. These jaw…
- Pobrania
- 296
- Polubienia
- 67
- Ocena
- 5
P
PrintablesMichio
Knipex Pliers hook for Bott System
This is a hook designed to hold Knipex Pliers on a Bott tool Pegboard. There are two Versions. The shorter one is for standard-sized Knipex Pliers. The longer one should fit the VDE version with the broader handle. Print with supports on…
- Pobrania
- 294
- Polubienia
- 23
- Ocena
- 5
P
Printablesluma
Soft Jaws for Knipex 250mm Pliers Wrench 86-XX-250
Print in PETG or TPU, the jaws are printed face-down so the gripping surface can match your print bed (use smooth bed for smooth jaws, textured for texture, etc). Geometry was 3D scanned from the tool for precise fit, this should easily…
- Pobrania
- 291
- Polubienia
- 57
- Ocena
- 4,83
P
Printablesrhinodavid
Knipex Flush Cutters 78 61 125 Gridfinity Case
Created with the Fusion Gridfinity Generator .
- Pobrania
- 285
- Polubienia
- 37
- Ocena
- 4
P
Printablessonnyc
Wall Control - Knipex Cutters 78 61 125 & Needle Nose Pliers 25 01 140
This holder/hanger is specifically made for the Knipex Cutters 78 61 125 & the Knipex Needle Nose Pliers 25 01 140. It is possible that other similar types of pliers could fit. See my other Wall Control designs:…
- Pobrania
- 284
- Polubienia
- 40
- Ocena
- 5
P
PrintablesLeathercraftV
IKEA Skadis Knipex Screwdriver
Two precize holders for Knipex screwdrivers Flat and Cross, other types of screwdrivers or other brand might or might not fit in (not tested). Tested screwdrivers Knipex flat sizes: 0,5x3, 0,8x4, 1x5, 1,2x6,5 (982030, 982040, 982055,…
- Pobrania
- 272
- Polubienia
- 62
- Ocena
- 5
P
PrintablesRingbaer
Knipex Cover 7803125/ 7861125
This is a small protective cover designed for the Knipex side cutter 78 03 125 (without lead catcher). When applied, the cover locks the pliers in the closed position, ensuring safety and convenience during storage or transport. Printing…
- Pobrania
- 270
- Polubienia
- 51
- Ocena
- 5
P
PrintablesDerKuchenmann
knipex 975334 crimping pliers hsw
Use the M4 insert form HSW and a M4x30 swrew *Update 2024.02.29* Adding a model with hex insert after request- Not tested - please feedback
- Pobrania
- 265
- Polubienia
- 48
- Ocena
- 5
P
PrintablesSorenTheSwede
EDC Utility Knife & Knipex Cobra XS Holder
This is a slimline holder for froooch's EDC knife (and variations thereof, such as the ones I made here and here ) and the KNIPEX Cobra® XS (SKU 87 00 100) mini pliers. The EDC Utility Knife slides over a boss on one side of the holder,…
- Pobrania
- 256
- Polubienia
- 65
- Ocena
- 5
P
Printablespastaoceanfrog
Skadis Knipex Cobra XS holder
Print with supports. Be careful hanging up this massive tool, and make sure your pegboard is attached properly to the wall /s
- Pobrania
- 255
- Polubienia
- 43
- Ocena
- 4,86
P
PrintablesMatthias Hartmann
Gridfinity Knipex 7881125 side cutter Seitenschneider
Gridfinity Knipex 7881125 side cutter Seitenschneider 2x4 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
- Pobrania
- 255
- Polubienia
- 47
- Ocena
- 4,5
P
PrintablesMaybeSpooknik
Knipex Tool Holders for Ikea Skådis
Remix of this design No Supports Necessary Print as placed in the 3MF files (pegs up) Fits very tight onto the Skadis board for a solid fit Models are labeled after the Kinpex part number found on the handles This is a simple print that…
- Pobrania
- 246
- Polubienia
- 42
- Ocena
- 5
P
PrintablesMeluniis
SKÅDIS pegboard knipex hanger
A small / compact hanging solution for your favorite snips - knipex flushcut, mouts using a flexible peg, easy to install and easy to remove, prints without supports
- Pobrania
- 244
- Polubienia
- 34
- Ocena
- 4,57
P
PrintablesMarcK
S37x9 - B73 - Zangen Halter - Knipex
Halterung für: Zangen und Stifte Passend zu: S37x9 und Skadis Lochwände 8 Versionen: 2- und 3fach jeweils als => open - close - getrennt Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 -…
- Pobrania
- 238
- Polubienia
- 37
- Ocena
- 5
P
PrintablesMatthias Hartmann
Gridfinity Knipex 0205180 combination pliers Kombizange
Gridfinity Knipex 0205180 combination pliers Kombizange 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
- Pobrania
- 231
- Polubienia
- 52
- Ocena
- 0
P
Printablesamlp
Gridfinity double pliers or one plier and one Knipex Cobra 125mm
Holds either one Knipex Cobra 125mm and one medium sice plier or tow medium pliers.
- Pobrania
- 228
- Polubienia
- 40
- Ocena
- 4,33
P
Printablesrycyt
Knipex Pliers Wrench Gridfinity 2 x 5
Gridfinity bin for a Knipex Pliers Wrench - 86 01 180. Has some space around the edges so might be able to fit similar pliers wrench with different handles. 2 x 5 Gridfinity bin from the Fusion 360 plugin, traced the Knipex before…
- Pobrania
- 224
- Polubienia
- 46
- Ocena
- 4
P
Printablesakak
Knipex Cobra (87-01-250 ) Pliers Gridfinity
Gridfinity bin for Knipex cobra pliers. Tool outline was generated using https://tracing.tools/
- Pobrania
- 216
- Polubienia
- 21
- Ocena
- 5
P
Printablesweak
Gridfinity Tray for Knipex 97 51 10 Crimp Tool
A 5x2x4 Gridfinity tray for the Knipex 97 51 10 crimping pliers for Western plugs (RJ45). I've made this to store my pliers in the Gridfinity Storage Box by Pred , trying to use as little height as possible. It does work fine for that use…
- Pobrania
- 205
- Polubienia
- 43
- Ocena
- 5
P
PrintablesRene
Knipex mini pliers holder skadistnut
The holder is modified to hold the "Knipex 86 05 150 Zangenschlüssel 27mm 150mm" The holders spacing is 26mm. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards
- Pobrania
- 200
- Polubienia
- 37
- Ocena
- 4,75
P
PrintablesSogidaned
Knipex VDE Pliers Holder Skadis
no support needed brim helps with adhesion problems
- Pobrania
- 194
- Polubienia
- 30
- Ocena
- 4,75
P
PrintablesOdysseos
Knipex Pliers Wrench Holder for Lidl/Parkside Pegboard
This is another holder for the Knipex pliers wrench (model 87 01 250). It fits the Lidl/Parkside pegboard. My Printing Settings Nozzle : 0.4 Layer Heigth: 0.2 mm. Infill: 15% Supports: YES
- Pobrania
- 192
- Polubienia
- 34
- Ocena
- 4
P
PrintablesTimTwix
KNIPEX COBRA 150 Cover
Cover to avoid damage of parts by pliers. Designed for KNIPEX Cobra 150 (87 01 150). I printed these covers in PETG and PLA.
- Pobrania
- 191
- Polubienia
- 44
- Ocena
- 5
P
Printablesamlp
Gridfinity double Knipex Cobra 250mm
Holds tow Knipex Cobra 250mm made for the gridfinity system. Have fun with your Cobras ;-)
- Pobrania
- 187
- Polubienia
- 31
- Ocena
- 5
P
PrintablesDaave
Gridfinity - Knipex "Cobra" Pliers
This is a single 5x5 Gridfinity holder I created for a set of Knipex Cobra Pliers I purchased a while back. (87 02 180) 7 1/4" Cobra Water Pump Pliers (87 02 250) 10" Cobra Water Pump Pliers (87 02 300) 12" Cobra Water Pump Pliers This…
- Pobrania
- 184
- Polubienia
- 70
- Ocena
- 5
P
PrintablesKevin
Knipex groove pliers holder
A holder for you groove pliers. Prusa PETG 0.2 mm speed preset.
- Pobrania
- 175
- Polubienia
- 17
- Ocena
- 0
P
PrintablesTheSpyWhoLovedToBake
Knipex Cobra 125 soft jaws
Scaled each axis separately to better conform to the jaws of my slightly larger 125s. Tried 125% scaling as the other user did but didn't fit at all for me. Once I landed on this size I printed 99, 101 and 102% versions to see which fit…
- Pobrania
- 173
- Polubienia
- 31
- Ocena
- 0
P
PrintablesMichael Panzer
Knipex Pliers Wrench Holder - 3 Sizes HSW
All sizes mount using a hollow hex insert STL, STEP, and parametric FreeCAD files included Sizing: Small - 150mm Medium - 180mm Large - 250mm
- Pobrania
- 170
- Polubienia
- 22
- Ocena
- 5
P
PrintablesLuke Hoersten
Knipex and PB Swiss tool mounts
The 8" Empire Level mount and ¼" Hex Bit Holder have embedded 6x3mm magnets . The mounts are all designed to work with #6 x 3/4 in. Phillips Flat Head Screws or similar.
- Pobrania
- 170
- Polubienia
- 40
- Ocena
- 5
P
Printablesmwalbeck
Skadis holder - Knipex pliers, wire cutter and wire stripper
Skadis holders for Knipex pliers, wire cutters and wire stripper The holders are designed to be used with this skadis peg for mounting https://www.printables.com/model/635620-skadis-skadis-universal-peg The wire stripper holder works is…
- Pobrania
- 167
- Polubienia
- 14
- Ocena
- 4,5
P
PrintablesKrzysztof SP5GDX
HSW Knipex Cobra Holder
I printed it in PET-G from DevilDesign. It came out very well. My settings Nozzle : 0.4 Layer heigth : 0.2 Layer Width : 0.42 Walls: 3 Top / Bottom Layers : 2 Infill: 15% Supports : Yes
- Pobrania
- 166
- Polubienia
- 26
- Ocena
- 5
P
PrintablesKogaMiyata
Knipex plier stand tool rack for serie electronics
Knipex plier stand tool rack for serie electronics, easy to use and simple and clear for six pliers. See photo's how the plier fits into it's hole. I'm a fan of printing with PC but disadvantage is that when it come lose of the printing…
- Pobrania
- 164
- Polubienia
- 54
- Ocena
- 5
P
PrintablesMarkuzzzi
Gridfinity Holder for KNIPEX XS Pliers / Wrenches
A holder for 2 XS / mini KNIPEX pliers. As I own both of the following pliers / wrenches of KNIPEX, I like to store them in the same gridfinity bin with dimensions of 1x1x6. But of course, the bin can be used to store 2 of the same KNIPEX…
- Pobrania
- 163
- Polubienia
- 25
- Ocena
- 5
P
Printablestelefaksi
Knipex Pliers Set Gridfinity
Gridfinity bin for Knipex 00 20 11 pliers set. Pliers in the set are 03 02 180, 26 12 200 and 70 02 160. I included also individual bins for each plier.
- Pobrania
- 156
- Polubienia
- 20
- Ocena
- 5
P
PrintablesDaave
Gridfinity - Knipex Long Nose Pliers
These are some Gridfinity holders I created for a some large (Knipex 26 12 200) and small (Knipex 25 02 160) pliers that I have. The large holder is 2x4, and the small holder is 2x3. Hopefully the tolerances are loose enough so that these…
- Pobrania
- 155
- Polubienia
- 30
- Ocena
- 5
P
PrintablesAaron
Adhesive Mount / Holder for Knipex Side Cutters
Based on a mount for Needle Nose Pliers this mount is for Side Cutters. The mount utilizes VHB tape for secure attachment to a flat surface. The images attached demonstrate the model being mounted on the inside of a cupboard door. This…
- Pobrania
- 154
- Polubienia
- 25
- Ocena
- 5
P
PrintablesKBOX Labs
RAK IPEX pigtail bracket
Often the thought in the back of our mind, after we worked hard to mount that solar Meshtastic node in a hard to reach location: “Did my IPEX pigtail pop off the mount due to it being loose, or too much tension on it?” and “Is my…
- Pobrania
- 152
- Polubienia
- 33
- Ocena
- 3
P
PrintablesCamPaine
Knipex 125 Honeycomb wall mount - flush to wall
HSW Wall mount for 125 knipex pliers If you wish to support me please download and print this model from my maker world profile - campaine734
- Pobrania
- 149
- Polubienia
- 20
- Ocena
- 5
P
Printablesmweisshaupt
Knipex holder for two small cutters
The print is very easy, the part is designed to be mounted from the backside with two screws.
- Pobrania
- 147
- Polubienia
- 24
- Ocena
- 4,86
P
PrintablesDMFO
Knipex Cobra XS Pocket Holster
Holster to house Knipex Cobra XS Pliers in the small pocket of jeans. Keeps pliers from opening up and getting stuck in pocket while keeping them easily accessible. Print standing up to eliminate digging out supports.
- Pobrania
- 147
- Polubienia
- 12
- Ocena
- 0
P
Printableswie_das_geht
KNIPEX 12 62 180 (insulation stripper) holder for IKEA SKÅDIS
Halte deine Knipex Abisolierzange stets griffbereit mit dieser speziell entworfenen Halterung für das IKEA SKÅDIS Pegboard. Dieses 3D-Modell bietet den perfekten Platz für deine Zange und integriert sich nahtlos in dein bestehendes…
- Pobrania
- 146
- Polubienia
- 12
- Ocena
- 4
P
Printablesf1nsr
T-BEAM LORA SMALL BOX IPEX
Hello here is a small box for Lilygo T-beam cards. For this card LoRa GNSS NEO-M8N and NEO-6M card in ipex. Some short tests with water projection and immersion. The box resists well, no trace of water in the case. Only with ipex plug for…
- Pobrania
- 144
- Polubienia
- 30
- Ocena
- 0
P
PrintablesJBoe
Knipex Pliers Wrench 8603300 soft jaws
Object description: Soft jaws for the 300mm Knipex 86 03 300 Pliers Wrench. Replacement for original Article-Nr. 86 09 300 V01; EAN 4003773085812 Please note that the soft jaws on the photo look slightly different to the published design.…
- Pobrania
- 142
- Polubienia
- 27
- Ocena
- 0
P
Printableskillershead
Gürtel Köcher für /belt quiver for Knipex Cobra XS 87-100
[Deu] #Info Brauchte für meine Knipex Cobra XS eine Halterung/Aufbewahrung, weil sie mit ihrer scharfen Kante vorne schnell Löcher in meine Arbeitshosen zaubert. Nutze das ganze jetzt seit über einem Monat und habe mich daran gewöhnt.…
- Pobrania
- 139
- Polubienia
- 15
- Ocena
- 5
P
Printablestommmy3d
Knipex Super Knips Stand
A simple stand for the KNIPEX Electronic Super Knips cutter. Very easy to put in and take out.
- Pobrania
- 138
- Polubienia
- 24
- Ocena
- 5
P
PrintablesMarlon
HSW (Honycomb) Knipex wire stripper holder
Knipex Art.# 12 62 180 Wire stripper holder for honeycomb wall. You need 2 M3x12 screws to mount it.
- Pobrania
- 136
- Polubienia
- 18
- Ocena
- 5
P
PrintablesClamikra
Knipex 38,5mm Pliers Holder for Skadis - (Knipex model No. 70 15 110 and 08 05 110)
This is a holder for Knipex pliers for the Ikea skadis pegboard, printed in one part. It fits Knipex model 70 15 110 and Knipex model 08 05 110 I designed this model completely new from scratch, but it is inspired by Aaron s Knipex holder…
- Pobrania
- 135
- Polubienia
- 19
- Ocena
- 4,75
P
Printablesmark-m-aus-f
Multiboard Knipex 125mm / 150mm
Passend für Multiboard, siehe https://www.multiboard.io Halter für Knipex 125mm Zangenschlüssel - 86 03 125 Halter für Knipex 150mm Zangenschlüssel - 86 03 150 Mounting for Knipex 125mm Pliers Wrench - 86 03 125 Mounting for Knipex 150mm…
- Pobrania
- 132
- Polubienia
- 30
- Ocena
- 5
P
Printablessvobo
Wall holders for Knipex Pliers wrench 86 03 180 and Cobra 250
Two separate holders for Knipex tools - the pliers wrench 180, which is probably my most used tool, and the old trusty Cobra 250. The Cobra holder does not hold the pliers completely vertical, which still could be optimized. It is however…
- Pobrania
- 132
- Polubienia
- 12
- Ocena
- 5
P
PrintablesJannisJFry
Skadis Mount for Knipex Electronic Super Knips
A mount for the Knipex Electronic Super Knips electronics side cutter(KNIPEX 78 03 125). With and without pliers icon print. Print with the flat side down and with support. Print Settings Printer Brand: Anet Printer: A8 Rafts: No…
- Pobrania
- 129
- Polubienia
- 16
- Ocena
- 4,75
P
PrintablesRene
Knipex 1242195 Skadis Holder
Holder for Knipex 1242195 wire stripper. Requires skadisnut to mount. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards Happy printing! 05.09.2022: Added files with 2.2mm…
- Pobrania
- 128
- Polubienia
- 28
- Ocena
- 5
P
PrintablesMarkuzzzi
Gridfinity Holder for KNIPEX Automatic Insulation Stripper
This holder for the gridfinity system is designed to store the KNIPEX Automatic Insulation Stripper (12 62 180) and have it easily retrievable. To the best of my knowledge, the models of JOKARI have the same dimensions, hence should fit.…
- Pobrania
- 128
- Polubienia
- 26
- Ocena
- 5
P
PrintablesDrJones
Knipex Cobra Water Pump Pliers perpendicular Multiboard mount
Multiboard mount for Knipex Cobra Water Pump Pliers in various sizes that positions the pliers perpendicular to the wall. This allows the pliers to only use a single 25mm row of space on the multiboard. Files are available for 3 sizes of…
- Pobrania
- 126
- Polubienia
- 13
- Ocena
- 5
P
Printablestelefaksi
Knipex 97 53 04 Gridfinity
Gridfinity 2x5x4 bin for Knipex 97 53 04 ferrule crimper.
- Pobrania
- 125
- Polubienia
- 19
- Ocena
- 5
P
PrintablesAdam L
Wall Control Holder For Knipex Cobra Pliers
Like my other wall control remixes, here I use the DDD system and design a custom mount for something that's not provided in the parent. This one is relatively generic, and I found that to get a good snug fit, it helps to cut a little…
- Pobrania
- 124
- Polubienia
- 27
- Ocena
- 0
P
PrintablesBen Coldham
Ikea Skadis | T-Nuts | Many Knipex Pliers Holders
Akin to the original model: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. Measure your pliers around the narrowest part of the handle (where they're mounted in the pics) to gauge if these will fit your pliers. 35mm:…
- Pobrania
- 122
- Polubienia
- 20
- Ocena
- 5
P
PrintablesDrJones
Knipex Pliers Wrench Multiboard perpendicular mount
Multiboard mount for Knipex Pliers Wrenches in various sizes that positions the pliers perpendicular to the wall. This allows the wrenches to only use a single 25mm row of space on the multiboard. Files are available for 4 sizes of the…
- Pobrania
- 120
- Polubienia
- 11
- Ocena
- 5
P
PrintablesOdysseos
Knipex Cobra 125 Holder for HSW
I printed it in PLA from Ouverture brand. It came iut very well. My settings Nozzle : 0.4 Layer heigth : 0.2 Layer Width : 0.45 Walls: 4 Top / Bottom Layers : 4 Infill: 20% Supports : Yes
- Pobrania
- 120
- Polubienia
- 18
- Ocena
- 0
P
PrintablesMatthias Hartmann
Gridfinity Knipex 3125160 needle nose pliers needle nose pliers Greifzange
Knipex 3125160 needle nose pliers needle nose pliers Greifzange. 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
- Pobrania
- 119
- Polubienia
- 28
- Ocena
- 0
P
PrintablesBeaverButter
HSW Knipex Cobra 125mm
HSW holder for a Knipex Cobra
- Pobrania
- 118
- Polubienia
- 27
- Ocena
- 0
P
Printablesf1nsr
T-BEAM LORA BOX SMA or IPEX, with Amplifier.
Hello here is a universal box for Lilygo T-beam cards. Some short tests with water projection and immersion. The box resists well, no trace of water in the case. with sma or ipex plug for the T-beam , sma plug output. 25x25 gps antenna ,…
- Pobrania
- 116
- Polubienia
- 21
- Ocena
- 0
P
PrintablesDonJon
Knipex Plier Wrench 86 04 100 Soft jaws
Soft jaws for the small knipex plier/wrench 86 04 100. There jaws are ment to be printed with rigid materials (not TPU) and they snap in place with little retainer tabs. Category: Hand Tools
- Pobrania
- 115
- Polubienia
- 32
- Ocena
- 5
P
PrintablesBaca
Knipex Pliers Wrench Skadis hook
A SKADIS compatible Knipex Pliers Wrench hook to be used with CSD_Salzburg's SKADIS Universal Hook I suspect that the XS hook might also work with the 125 as they look to have the similar size/geometry at the jaws. I unfortunately do not…
- Pobrania
- 112
- Polubienia
- 19
- Ocena
- 5
P
PrintablesRene
KNIPEX ErgoStrip Skadis holder.
Paint support under skadis hooks. Happy printing!
- Pobrania
- 111
- Polubienia
- 19
- Ocena
- 4,6
P
Printableswoelpi
Skadis - Knipex Pliers - Electronic Super Knips - T-Nut Edition
Holder for the Knipex Pliers
- Pobrania
- 110
- Polubienia
- 16
- Ocena
- 4,67
P
PrintablesT1T3T4
Werkzeughalterung Knipex Seitenschneider
Halterung für Seitenschneider
- Pobrania
- 108
- Polubienia
- 9
- Ocena
- 0
P
PrintablesAdam
Pegboard mount for 7in/180mm Knipex Pliers Wrench 86 03 180 - Magnetic
Use 3x6mm magnets. The hexagons holes allow you to get them out easier if absolutely needed. But you do need to hammer/press them in. No glue needed. Printing You do not need supports for the hexagon hones, this was able to be printed…
- Pobrania
- 106
- Polubienia
- 12
- Ocena
- 5
P
PrintablesDerKuchenmann
Knipex 9721215 crimping pliers hsw
knipex 9721215 crimping pliers hsw
- Pobrania
- 106
- Polubienia
- 19
- Ocena
- 5
P
PrintablesOdysseos
Knipex Cobra 150 Pliers Holder for Lidl/Parkside Pegboard
Holder for the Knipex Cobra 150 pliers (model 87 01 150) for the Lidl/Parkside pegboard. My Printing Settings Nozzle : 0.4 Layer Heigth: 0.2 mm. Infill: 15% Supports: YES
- Pobrania
- 105
- Polubienia
- 16
- Ocena
- 0
P
Printables3DMark
Knipex Pliers 7020160 Holder Ikea SkadisTnut
An adapted model to fit the 70 02 160 plier. Printed in 0.3mm with PETG.
- Pobrania
- 104
- Polubienia
- 11
- Ocena
- 5
P
PrintablesExtrude Dude
Knipex Wrench Pliers Holder for Skadis Board
Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…
- Pobrania
- 103
- Polubienia
- 13
- Ocena
- 5
P
PrintablesAaron
Adhesive Mount / Holder for Knipex Steel Nose Pliers 160 mm
The mount utilizes VHB tape for secure attachment to a flat surface. The images attached demonstrate the model being mounted on the inside of a cupboard door. This design is particularly useful in shared spaces where it is important for…
- Pobrania
- 102
- Polubienia
- 13
- Ocena
- 5
P
PrintablesF5 Design
Plumber Tong Jaws for Knipex
This are Jaws for 300mm Knipex Tongs (87 01 300). these are for assembling and disassembling a syphon. Just print it out and glue the TPU piece in the 10mm holes. You also can use some 10mm round Rubber to make it grip nicely. The…
- Pobrania
- 101
- Polubienia
- 66
- Ocena
- 0
P
PrintablesTritschi
Set of Knipex Pliers in a Box
Based on Yanev's cool design, another tool box. Today for my Knipex pliers set. Didn't like the fabric case with the rubber retainers. Hard to take out, rubber lendering over the time. Lid has three inlets (0.8mm each): Knipex logo see…
- Pobrania
- 101
- Polubienia
- 21
- Ocena
- 0
P
PrintablesFrankyD80
Knipex Cobra 8701125 Pliers case
I designed it ultralight and found the glowing filament ideal. I'm not sure if upscaling fits bigger pliers. But feel free to try.
- Pobrania
- 100
- Polubienia
- 16
- Ocena
- 5
P
PrintablesMatthias Hartmann
Gridfinity Knipex 9010165 Cuttermesser cutter knife
Gridfinite Knipex 9010165 Cuttermesser cutter knife. 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
- Pobrania
- 98
- Polubienia
- 40
- Ocena
- 0
P
PrintablesMatthias Hartmann
Gridfinity Knipex 880250 water pump pliers Wasserpumpenzange
Gridfinity Knipex 880250 water pump pliers Wasserpumpenzange The 2 parts do not need to be fixed. They hold by themselves due to the grid. If you still want to secure it, you can use the magnets. 2x7 grids. See all my tools…
- Pobrania
- 97
- Polubienia
- 21
- Ocena
- 0