248 modeli
You may find two versions of .stl attached: v2 which is higher (about 4 mm regards to v5) and tighter in tolerances, what results some minor problems during mounting into the profiles, v5 which is lower and fits not so tight as v2 (easier…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: uploaded before & after graphs from my printer! EDIT: ADDED VERSIONS THAT SHOULD FIT THE STOCK FEET BOLTS! EDIT: Added 30mm & 35mm versions that use stock…
My printer sits on a mostly empty entertainment console and vibrates the thing like a drum. I saw this model on ALL3DP's suggested TPU prints list and gave it a go. This does not replace the printer's feet - they just sit securely in the…
Are you tired of that mainboard fan drone coming from underneath your Centauri Carbon? Often heard in between prints during cool-down or when anything on the printer is active. This takes the edge off the annoying sound by decoupling the…
2 sizes: 51mm inner 58mm inner + full 45° cut
While I liked the original design, I have closed of the grates behind the hygrometer to isolate it from the silica gel. By doing this hygrometer will not be influenced from the close proximity of the silicagels behind the grates. This…
If you don't have a Skadis board….. don't worry :-) you can use this https://www.printables.com/model/799637-wall-mounted-t-clip-system
Isolator for Hamradio Antennas
A model of an insulated rail joint for H0 scale. It wasn't modelled for a specific rail code, but I tested it on Lima and Fleischmann rails. I printed it in PETG with a 0.4mm nozzle at a layer height of 0.2mm, lying flat on the build…
I originally posted this on Thingiverse back in 2013 after I sketched one up to get me out of a tight spot. See https://www.thingiverse.com/thing:166965 I've slightly amended the design here so it should be a better print. There is a…
This is not the most flush design, it leaves some gap to provide isolation. I used 2 clips of 1cm out of ABS and it turned out super nice at the first try. You can simply scale up/down Z to your desired dimension. The hole is there to…
It's just an isolator plate to prevent stack from contacting a carbon frame.
This allows you to use the newer Bambu style isolator feet with your adventurer. I modeled and tested them with some cheaper Amazon ones - but they should all fit. Please let me know if you find some are too tight/loose.…
I designed this thing to isolate dc ground from chassis ground for antennas panel mounted on metal enclosures. It is basically a pair of 1mm thick 14.5mm flange washers, with 6.5mm ID, and a 9.2mm OD 0.5mm thick flange. It mounts standard…
I needed some track isolators for my N scale layout and while buying some was about 2€ the shipping costs were about 7€. So I fired oneshape and created some. They are maybe a bit bigger than needed, but better be safe than sorry. I…
Print with PETG, Nylon, or other non-brittle material. I would suspect that PLA may crack over time. I advise against CF reinforced filament, I tried it and it squeaked terribly against the springs. The first set I printed at 100% infill,…
Shrimp Jail v1.1 Lock those buggers in! The perfect hanging isolation chamber for misfit shrimp, fish, snails, and other up-to-no-good aquarium residents! Also great for pregnant fish, guppies, and other moms that need to be separated…
The sensor was reading the actual humidity inside the desiccant holder, not the environment. This isolates the sensor from the desiccant.
Print in PETG with enough perimeters to have a solid base under the springs. I attached a .3mf that has this already done for you. Uses medium strength die compression springs, 20mm OD, 10mm ID, 40mm long. Designed for M6x12mm button head…
I was looking for something like this for my Anycubic Kobra Neo as when I would unplug the power from the Raspberry Pi I'm using for Octoprint, the Pi would stay on… which is obviously not correct. Searching the web for removing power…
This is a series 3d prints to seal of the back of the makera carvera from chip ingress. The files have been updated to reflect the new version of the vacuum that is common with most machines (the prints completely replace the vacuum…
Made for SVS Subwoofers but can be used with others aswell. Needs a ¼-20 bolt, 15-20mm length I used ABS-GF and TPU 90A to print these parts. For feet i used 2 walls with 8% gyroid infill with 90A TPU, that gave good results with SVS…
Update: included TPU feet from Elan As part of my Lack Enclosure Build for my new MK3S+, I wanted to isolate printer vibration from the table top and reduce noise. I designed my own feet which included outboard supports on the front of…
A small antenna isolator (2mmx 1.4mm) that can be used for ham radio QRP operations (e.g. as a stress relief for an antenna wire or can help hang a wire on top of a mast/fishing pole). Inspired from top antenna isolators sold by SOTABEAMS…
This low profile vibration isolator reduces the transmission of vibrations to the table top and lowers the noise significantly. It is easy to print, space-saving and inconspicuous. The vibration isolating feet lift the printer only a few…
It allows to attach elements without drilling holes in the boom. Good for adjustment of element positions. Elements are positioned above the boom and isolated from it. Designed for 13mm x 13mm boom. Reflector, radiator and director…
Enclosure for popular ADUM3160 USB Isolator. PCB size of board is around 23.5 x 40.5 mm. Enclosure size (without usb ports) - 45.1 x 28.1 x 22 mm. There are two version - marked and unmarked one. Choose as you prefer - parts are…
It is an enclosure meant to protect the board from unexpected shorts and make it easier to work with. It is designed to allow access from the top so that the screw terminals can be tightened. You can check out the completed assembly below.
Keep your tiny buck converter safe and isolated from the rest of the circuits of your printer. I added a hole for adjust the voltage Just print them as downloaded, no supports needed I have made this case for the item linked bellow (the…
I don't know if it was to cut cost, but Lima on their normal non golden tgvs didn't include isolators. Really a shame to not include such basic parts. It was bothering me, so here you go, you can print them for yourself rather than buying…
High voltage curve tracer , isolation tester Some time ago I ordered 230VAC LED modules, consisting of an aluminium coolplate and electronics, separated only by a thin layer of isolation. I wanted to check the safety of the isolation, and…
Just simple modification of existing hook for use for more items (in this case isolation tapes).
This is a very simple model, just print 4 of them and slot them into the feet of your printer. You can also stick some felt or rubber stuff to the bottom. Lay the model on the side, this way there are 0 overhangs and it should print…
Das ist ein Adapter für den xt60 Stecker und Buchsen um die Kontakte zu isolieren. Der Adapter sitzt sehr streng auf dem xt60 Stecker. Trotzdem habe ich den Adapter mit Sekundenkleber am Stecker angeklebt. This is an adapter for the xt60…
A bottle cover that keeps your beer cooler for a bit longer if you want to drink it later. The walls are about 10mm. Bottles differ a lot so this one fits to most Czech beers, some German too but no guarantee. The bottle used for the…
Hello everyone! I designed these 3D-printed supports for 30 mm diameter springs, intended to isolate the seat, enhance the performance of the bass shakers, and minimize vibration transfer to the rest of the simulator. The 3D support…
Hey you! Person reading this! Looks like you were mounting some hard drives and realized they didn't give you enough of those silly rubber things to mount the drives in the tray! You have screws but… if you put the drive in the board…
Caja para el hub USB aislado galvánicamente
Isolate token for the board game Spirit Island. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.4 mm Infill: 35% Filament: Ender; eSun PLA; PLA+ Body: White; Base: Black Notes: A filament swap…
I felt that the ender 5 s1 would benefit from some vibration isolating pads. so I made these, and they simply just go under the factory feet. I have no way of testing but I feel they do help with reducing vibration. I printed with tpu…
This model is a replacement for the stock top plate that comes with the s500 frame kit. It includes vibration isolation for an autopilot / flight controller board and provisions to mount a raspberry pi companion / flight computer for…
Isolator on hamradio HF wire antenne. Izolátor pro drátové anténa na KV
A two-part housing for a Jtron battery isolator switch . The design has openings on both sides and allows direct insertion into the battery cable. 4 screws M4x16 needed to mount top to bottom. Mount to a baseplate with two screws on the…
BIOHAZARD DO NOT ENTER ISOLATION PROTOCOLS IN PLACE, SIGN Category: Signs & Logos
Needed a solution to isolate my speakers from their stands. I bought some squash balls from Amazon and designed this bracket to hold them in place.
STOP, DO NOT ENTER, ISOLATION PROTOCOLS IN PLACE, SIGN Category: Signs & Logos
Alpha Centauri/Trisolaris Orrery The Alpha Centauri system has 3 stars. The 2 larger stars orbit about a common center while the 3rd star orbits at a much greater distance. There are no known planets orbiting the central 2 stars. There is…
Remixed an already great cover to add AC/DC isolation. The back of the AC socket is now covered from DC side
Les 2 balais du collecteur moteur sont maintenus en pression par un ressort et un petit crochet isolant. Ce crochet étant cassé, celui-ci, imprimé en ASA remplit parfaitement la fonction. Existe aussi en pièce détachée sur…
Isolation Board Game! At the time I couldn't find any printable versions I liked so I made my own. The fitment test object is so you can test the fitment of tiles and pawns without having to print the entire board. You need 2 pawns and 46…
This is a snap-fit case for the 10€ galvanic USB protector PCBA you can source from China. With this gadget you can be sure not to tinker-blow your valuable USB ports with an unmindful failure in your DIY electronic prototypes. There is…
My original plan was to use 4 of these isolators between a platform for my vinyl player and a table, but I didn't finish the project. Should work with any squash ball, I tested using these .
Wire Antennas Isolation Rings (Chameleon Inspired) Pretty basic torus shape, good for isolation rings for wire antennas. Printed with a few extra walls and feels pretty strong for amateur radio use.
fully cover the huge space around Z lead screw inside right panel so that X, Y driver don't get 100C degree high, and better keep the main print chamber temperature higher. This is inspired by below original design, one of many talented…
A 2-Piece cover designed to cover up the terminals of a battery isolator switch held together with 2 tie-wraps. I recommend printing this in PETG or any filament that has a higher melting temperature than PLA as PLA starts to deform at…
I liked Forker45s take on vibration isolation feet but didn't want to wait for the bought isolation pads so I made some quick ones printed in TPU. Printed at 10% infill and 3 perimeters for flexibility - you don't want a rigid object for…
I use Adafruit's USB Isolater (https://www.adafruit.com/product/2107) whenever I'm programming an ESP or similar microcontroller in a live circuit so I don't have to worry about backfeeding power into my computer. It is an ESD-sensitive…
After purchasing a new subwoofer, I soon found out that the old windows in my flat rattle when the full bass power is unleashed. This led me to try to isolate the vibrations transferred to the floor from the subwoofer. I've combined the…
Remix of MadCapybara's design for sim rig vibration isolation.
Hairpin Line Isolation Mount for Hy-Gain Discoverer 7-1 (40m Dipole Antenna) Replacement hairpin line isolation mount specially designed for the Hy-Gain Discoverer 7-1 (40-Meter 1-Element Dipole Antenna — Order No. 371S). Original…
The Jtron Battery Isolator has a removable switch handle which can easily be lost. The switch is used e.g. on the TowFLEXX aircraft tug. This is the 3D model to print a spare handle. Organic Supports and colour change for the embossed…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. Please STOP that! I will pull these off here if this keeps happening. I put these up for the benefit of the community. Not the monetary…
Helps to reduce mechanical noise transference from Creative Pebble (V3) USB Speakers, and fits nicely into the elliptical footing enough to hold itself in place when you (gently) move the speakers. Printed with Polymaker 95a TPU Works…
I made this primarily for my RAM GPS mount; When attached to my motorcycle, the vibration would always cause my Garmin GPS to shut off after a few minutes of riding. With this installed, my GPS stays on during my rides (both on &…
I was getting fed up getting poked in the leg when out geocaching so made a cap for my set of I sharp tweezers. there is a hole for a lanyard if you so wish to have one too. I printed this in PLA but would be better in PETg or maybe even…
This project is a custom modification for the Anycubic Kobra S1 designed to separate the electronics compartment from the print chamber . The main goal of this modification is to: Significantly improve chamber airtightness Ensure very…
Exactly as it says. Part will seem a few MM short but thats to keep it tight against the peg. stretching in Z axis should loosen. **Tested on a 300Whp MSM in heat index of 110*F on a 2 hour drive. I do not baby my cars I enjoy them. I…
Enjoy this link! The second picture is the end result of one of my students’ projects using the link to create something flexible.
The sensor was actually reading the humidity inside of the holder, not the environment around it. This isolates the sensor from the desiccant in the holder.
This model is based off of the original Titan V1's isolator model created by "Chaosmatic" to be compatible with the v1.5.
Description: A direct replacement for the Sony PVM-14L5 rubber isolation feet. This will also fit other PVMs such as the 20M4U and 1954Q. Printing: Foot: Use FlashForge ASA or equivalent alternate. 0.4mm Nozzle, 0.2mm height, 50%+ infill,…
This is a case for the isolated USB to RS232 converter. It does not require any screws and just press fits in to place. There are two types of top cover, one plain and one with text. Print instructions Printer Brand: Prusa Printer: i3…
Prusa Mini + Z axis horizontal top handle in combination with vertical handle, generate the two-points leverage support for ergonomics as a system to relieve tension on the ZY Axis structure frames, and provide balance support to the…
Ich habe den Dosenkrug von makerworld mit dem 1L Beermass von Thingiverse isoliert. Gedruckt mit weißem PETG von tecbear und für 0,5 Liter Dosen. Einstellungen: AliZ PETG 0.2mm Schichthöhe Automatisch Stützen Die innere Stützkonstruktion…
One of our fish was getting bullied by the rest, and we wanted to keep him separated for a while so he could have a chance to recover. We found the “Aquarium Critter Isolation Box” from @ColoGeo_143273, which was exactly what we wanted,…
I made this high-torque handle for water isolator valves to make them easier to turn for situations where the valves are hard to reach or get tools onto or for people with reduced mobility. I've made 2 versions, one to fit valves with an…
This is an ESD isolated case for a 12/24 volt relay board commonly found on Amazon/other sites. Here's the exact relay boards I used: 12 volt: https://www.amazon.com/dp/B00LW2GM84?psc=1&ref=ppx_yo2ov_dt_b_product_details 24 volt:…
Für die Isolierung statt Schrumpfschlauch bei XT60 zu XT30 Adaptern für beseren Gripp. Hergestellt aus TPU. Da kann man eigentlich nicht mehr viel zu sagen. For insulation instead of shrink tubing on XT60 to XT30 adapters for better grip.…
The original files appear to be missing the endstop arm, so I isolated it to print separately.
I created these mounts to fit the Hudson Hi-Fi 1.5” Bigfoot Isolation Feet as I found that when using the squash balls, the squash balls would get squashed too much and most of the weight was at back which created a slight tilt backwards…
About A hook/mount designed to securely guide a wire string or wire trough. Can be used as isolator. Other material Screw 3x20 Recommended Settings Layer: 0.3 mm Infill: 100%
Just print it on it's side with some supports and it will come out just fine
For my trip to Norway in winter 2019 with my campervan, I developed a holder for XPS foam over my Seitz S4 windows. This Isolation worked perfectly and I had never any ice or snow inside the living cabin. Of course, you have no view…
I love these isolation pads but, when i upgraded my prusa to the bear 2.0, my existing mounts didnt match. I remixed the mounts to fit using the original files, its also nice to have the feet mounted to the frame. Print instructions…
Aus einem aktuellen Anlass habe ich diese 2 Modelle hier erstellt. In meinem Heizungsraum habe ich 43mm und 57mm Schaumisolierung verbaut, diese beiden Schablonen haben mir die Verlegung erheblich erleichtert. 90° Schnitte auf Gehrung,…
I bought a USB to USB ground isolator that doesn't have a housing. Very handy item at times. Needed a case. https://www.aliexpress.com/af/ADUM3160-isolation.html Category: Computer
Brings tweeter closer to ear level Reduces bass vibration of desk/floor (improves clarity and transmission for neighbors) Slot for cable tie to clean up cords Parts Foot & mat: print with TPU, 25% gyroid infill Body: I printed mine in…
The model is 4cm wide but can be rescaled to suit. Rescaled to 3cm for the Nvidia Shield (3 spikes facing the device) and works great. You could also try it for network switches. Infill @ 40%
This isolator can be used at Nissan Leaf Litium cells gen 2 to isolate
After finding a nice Silica Gel container to make I wanted to add a hydrometer that was isolated from the gel
Was going to print out of TPU, but saw other various models with a less stout attachment and a shorter foot. This will elevate the printer 58mm and should allow for a 120mm fan installation under printer and plenty of room for airflow. I…
8-channel photoelectric isolation module Board revisions may vary! Mounting holes 87x64 mm Compatibility: 8-channel photoelectric isolation module 35mm DIN rail Mounting components: M3 screws M3 stand
I got some proper isolated fan duct hose and wanted an adapter to be able to connect it to our AC unit. The outer dimensions on the thinner side is 120 mm, and on the larger side: 145mm. I printed it in PETG to be able to stand the higher…
Allgemein Verschiedene Durchmesser (Rockwool) 45° Schräger für 90° bogen V-Schnitt für T-Stück mit markierung für Mittelpunkt der Gehrung Schneiden mit Cuttermesser 3D-Druck Gedruckt in PETG 25% infill ohne Support General Various…
The Hi-Lift jack handle isolator slides down the beam and handle of the jack, keeping the loose jack handle from banging against the beam of the jack. TPU works best.
My MK3S has an annoying rattle coming from the screen/housing. Even after tightening the screws in the housing it continued. I designed this quick print to isolate the screen holder from the frame in the hope it reduced the rattle. It…
An shockmount (isolator) for the ZOOM H2n. This design uses a silicone band (wristband) to hold and isolate the H2n. The silicon band should last longer than an ordinary rubber band. It should also be easier to put the H2n in the…
CNC 3018 Pro Router Isolated Probe Case and Mount More info can be found on my blog: https://samueldperry.com/2025/01/29/cnc-3018-pro-router-isolated-probe/
I needed a pair for my DeWalt air Compressor, I had a spool of TPU so I made one. Printed it 40% infill Here are the settings I used : Printing speed = 30mm/s Travel Speed = 200mm/s Nozzle = 215°C, bed 30°C Retract = 2.8mm Retract Speed =…
Remix of @Oswald 's squash ball feet V5 (slimmer one). This design changes the look to be hex and more chonky. Used parts 4x PERFLY two yellow dot squash balls from Decathlon (one for each leg) My print settings PETG 0.4 nozzle 0.2 layer…
