Liczymy pasujące modele…
Waste side jigs for track saws / guide rail saws / plunge saws. These are used when you want/need to have your guide rail on the waste side of the line. If you put the splinter guard up to the line on your workpiece, your workpiece will…
This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right. Festool saws have different widths so use…
Didn't like the standard battery that the original poster made as it needed supports and looked horrible when printed. This is about 3mm bigger on the outside and has more room on the inside for the larger makerfocus battery and most…
Woggle Guides and Scouts from Chile neckerfhief or scarf ring. WAGGGS
No supports are required to print it. Akela, the alpha wolf of the pack from Rudyard Kipling's book 'The Jungle Book,' a very valuable character in the Wolf Cubs. This woggle or scarf ring is for those that represent Akela in your groups.…
Kerfur, NOW AVAILABLE WITH FACES! 4 face plates for your Dummy Kerfur, compatible with the V2 of the Kerfur head scaled to 150%. Plus, KerfurO Dummy Head V3 is included, now with an easy access spot to easily swap the face plates! V3 is…
Just needed to store my Makerfire Hex Screw Driver kit. Inspired by other solutions for Hex Screw Drivers - which doesn't fir for my set - I designed my own holder. Printed in ABS - but should work with other materials also.
As the model name suggests, this is my first attempt at a pattern to make fully rounded corners on wooden objects. The design cuts well, and looks aesthetically pleasing, and has a decent bend ratio. I was able to bend the 7mm MDF (only a…
Kerfmaker pour réaliser des découpes et assemblages. 2 boulons de 4X20mm et 2 écrous de M4 sont nécessaire pour finaliser l'assemblage du Kerfmaker. Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Yes Supports: Yes Resolution:…
This is a 2 piece printed housing to replace the original housing supplied with the sensor. The intent was to have something that was easier to put the sensor on, had more airflow, more protection, a little more appropriate sun shading…
There are two models, 2.2mm and 1.8mm for the kerf width of common Festool tracksaw blades.
Now you can have your very own little, or potentially large, Kerfur Omega! Ive printed it now in the normal scale for Dummy 13, and at 150% scaled as pictured. Printed with supports at both scales, at a layer height of .15. Model in…
My take on the ever popular tool to easily and accurately create rabbet and dados with a table saw, graduations added to each side for the estimated kerf and stock width, should just be used as a guide, this is 3d printing after all.…
Basically the same as last, but now with access to easily pop the face plate off! Uploaded with Face Plate Pack 1 but wanted a sep model for charities sake. UPDATE: Added a version with larger access port, makes printing at 100% scale…
This is a 2 piece housing for the MakerFabs Soil Moisture Sensor LoRaWAN. The housing print file they offer is square and has minimal airflow. This has excellent airflow and good protection from rain and lateral water. I strongly suggest…
No supports are required to print it. Bagheera, the black panther from Rudyard Kipling's book 'The Jungle Book,' a very valuable character in the Wolf Cubs. This woggle or scarf ring is for those that represent Bagheera in your groups.…
This is a case for the Wio Tracker L1 from Seeed Studio which can fit a 3000mah LiPo battery with the measurings 67.5 x 36 x 10,2 mm. Makes a good standalone Meshtastic device with the new firmware which has the virtual keyboard. Model…
ANOTHER PACK OF KERFUR FACES SO SOON!?!?! I rode the dopamine of making the prior pack, being happy with it, and made another right after! This pack adds the flavors of: -Sweepy -Sad -Concerned -SLosHeD ahhah bOOze time.
4 chest armor options for your Kerfur Dummy! Variant B is the one I'm most happy with, I think it looks the best in person while also not compromising the articulation of the D13. Remixed off the Type F chest, so you'll need to use their…
New face plates! Basically just meme faces and the 2 “”"Edgy""" faces. WARNING the cracked screen doesn't print great, and I want to redo it at some point. Its basically just a converted SVG of a stock image of cracked glass. Also…
No supports are required to print it. Mang, the bat from Rudyard Kipling's book 'The Jungle Book,' a very valuable character in the Wolf Cubs. This woggle or scarf ring is for those that represent Mang in your groups. Enjoy it! I am…
Wanted to make a version of the chest armor for the standard Dummy 13 frame, plus added a version where the center camera piece is separate to easily print in a different color. A new inner chest part is also included to better fit the…
Kerfur Omega V2, same model as last time, but you can print the screen separately to make it a different color! Mainly wanted this so the screen can be printed and not need to be colored in with sharpy. I am, evolving. Plus, I want to…
Hathi elephant 3D woogle neckerchief scarfring. Canuto o pasa pañuelo de Hathi, el gran elefante
Hallo Liebe Casino und Printables-Gemeinschaft, hier möchte ich euch gerne mein Poker Tassenuntersetzer Chip Set zeigen diese ich für Unser Mini Casino Home Edition erstellt habe. ( Erstellt auch für den MW Wettbewerb). ♠ Diese passen…
I printed this in PLA and used support. It should measure 9 5/8" long by 2 5/8" wide, if you have to scale it. I printed it on my Qidi i-fast printer. It took a little over 5 hours to print.
No supports are required to print it. Hathi, the big elephant from Rudyard Kipling's book 'The Jungle Book,' a very valuable character in the Wolf Cubs. This woggle or scarf ring is for those that represent Hathi in your groups. Enjoy it!…
My home automation Raspberry Pi needed a UPS battery backup. I am using HomeSeer HS4-Pi. Found this Pi UPS on Amazon and it works great. Wanted a long lasting UPS solution. Existing power supply powers this UPS while providing power via 2…
This is a jig for the Makerflo 8oz Whiskey Rocks Glass. I made this for my Xtool P2s to allow the glass to sit parallel to the honeycomb panel so I could engrave “flat surface” vs “curved surface”. This is an easy print with no supports…
Version of the V2 Kerfur head, but with HURT. Includes a version with AI chip merged and not merged. Pair with cracked screen face plate for EXTRA EDGE. Use supports for main head. Version picture printed at 150%, and even at this scale…
Shoutout @CryptidJon for the idea and files for this model, go check them out! This model is a complete collection as well as overhaul and general tweaking of CryptidJon's Kerfur Omega profile. Their model was no where near bad, but I did…
I made this kerf guide to allow me to make precise cuts on the lumber sitting under the track. Normally, the piece you cut to dimension is the one that you cut off, but with this guide the dimensioned part is the one sitting under the…
Description Table of Contents Model overview Parts used Printing Assembly This is a case for the Wio Tracker L1 from Seeed Studio which can fit a 3000mah LiPo battery with the measuring 67.5 x 36 x 10,2 mm. Makes a good standalone…
A commercial version of this tool is available for sale, but I wanted to try my hand at 3D printing a version. My version is more compact than most - this limits somewhat the width of dados that can be cut, but I expect that it will work…
Gridfinity Makerfire Hex-Driver Holder 4x5 Included is Fusion360 File if you want to edit it. Please check out my other models, lots more Gridfinity things coming over the next few weeks. Category: Tool Holders & Boxes
Summary A case for a Heltec/Makerfocus Wireless Tracker. Fits snug but does work! I was able to get mine together with
I made a zero clearance insert for the Mikita LS1220 miter saw.
Kerfur from Voices of the Void. The line going through the face seems to just be a problem with my printer, not the model. (Can't stand up btw)
This is a little speaker grill i designed for an Arcade Cabinet i build for our local makerfaire. The grill is for 100mm speakers. Hope you like the “Makey” in the middle. :)
This tool ensures that devices with built-in Europlugs (e.g. mosquito repellers, Dyson power supplies, compact adapters) sit straight and stable in Schuko wall sockets. No more tilted plugs! Simply attach the adapter to the device and…
This fan shroud allows you to mount a 40mm fan to cool your NEMA 17 extruder motor without blowing air on the bed or printed parts. It's specifically designed to fit on the MakerFarm Prusa i3 and i3v, but it should fit any printer that…
The logo of Maker Faire robot , Change the filament for red at 1mm height. Print very slowly due to the fine lines. If your printer has Marlin, you can change the filament by modifying your g-code and adding the line M600 before the…
Made the Kel Beanie wearable for your Kerfur Omega Dummy 13! May want to use a bit of poster tack or similar to hold it in place, not as snug as I was hoping. Will need supports.
I had combined LegendaryCheez's two parts into one to be printed on larger printers (Creality K2). This also fits Makita LS1013 as well. Print solid (infill 100%) for best results.
Festool Tracksaw Kerf Wedge I was sawing a long live edge piece of lumber and the kerf closed up on my blade causing slight kickback. I wished I had this when I was doing the cut so I designed this. You just place it in the cut kerf as…
I saw a demo online of the TInylev ( https://www.instructables.com/id/Acoustic-Levitator/ ) and wanted to build one. Instead of sourcing all the parts individually, I purchased a kit from Makerfabs.…
This is a replacement motor mount tab for the Makerfire 4-wheel drive robot chassis. These tabs have been tested on my robot for the past 5 months (over the winter of 2017-18) and have been holding up better then the one that came with…
Similar to this: https://www.tinkerforge.com/en/shop/mounting-plate-8x8.html 5 x 5 3mm hole spacing adjust model if to make your threads self tapping
A simple cone hat for a silly robo cat. Can be mirrored to fit other side of head.
Designed for 2.4mm kerf circular saw blades for those times when you need to make a cut on the "wrong" side (i.e. not the waste side) of your work. Provides a 2.4mm spacer that can be placed along side your track/straight edge and offset…
This kerfing plane uses the blade and hardware from Bad Axe Tool Works. The fence posts are standard 8mm linear guide rod as used by many 3d printers. I cut one over-length rod in two with a cutoff disk in a rotary tool and then let the…
Voices of the Void - Kerfur Toy It's a little kerfur toy. Based on this model: https://bsky.app/profile/monique-monsters.votv.dev/post/3mdtoop3rpc2u
Replacement kerf plate for a Ridgid 14" band saw.
I recently bought the Makerfabs ESP32-S3 parallel TFT board. It sits flat on the desk and I thought it would be better to have it held up at a 45 degree angle. I have a bunch of M2 screws and nuts, so I designed a simple frame around…
HSW Makerfile x 4. Added hexagon for Honeycomb Wall
A helmet and face plate based on funni Swedish man. Helm has the profile of the head/ear cut out to fit so it should fit snug and scale up to any desired scale! The helm can be printed flat on its bottom, and I would recommend some snug…
* UPDATE: a hardware kit is now available! * click here I am proud to present the Itty Bitty Double Extruder, a two-material belt-driven extruder with mounting hardware for MakerFarm i3v printers. Versions are provided for 3mm and 1.75mm…
Update: Added extra-long version for use with stock fan. This 40mm fan shroud and mounting bracket allows you to mount a fan to cool the print when printing with PLA. It mounts to the existing holes in the MakerFarm variant of the…
I bought these makerfire allan keys for building my voron and always meant to make caps for them as they are just hollow handles. These are a tight push fit when first made but in time they loosen up and turn when in use without falling…
Replacement e carriage for the Makerfarm i3v to mount the e3d Titan extruder. V1 with shim for most steppers, V2 includes shim distance (3mm) for e3d pancake stepper.
this version allows for longer dados up to 5cm or 2 inches. refer to the original model for instructions. You will need to print 4 axles, 2 cams and 1 part for all the others. Please follow the printing instructions of the original…
Makerfarm laser cut wood doesn't hold the Z nut in place effectively leaving backlash and will potentially lose z alignment entirely if bumped. This locks the nut into place and prevents both of these issues.
This is the third evolution of the Itty Bitty Double Extruder. NOTICE: Version 2.1 released. See notes below. * A hardware kit is available; links below. * New in this version Better flexible filament control Supports Hexagon AO Designed…
Als TPU 95 gedruckt in dichte von 70-90 Prozent, geeignet für Druckerfuss für Squashbälle halb und ganzer Ball.
I have searched for a good cooling fan for my printer since I have auto bed levelling but couldn't find one to fit my printer so I made this one I think it works great. I added obj file for Slic3r because someone told be that STL file has…
This is a drop-in replacement for the stock MakerFarm Prusa i3v X carriage mount that adds an additional eccentric on one of the upper wheels. This allows the entire carriage plate to be tilted left and right to level dual extruder…
Why Make the Switch? 🤔 1. No More External Raspberry Pi! 🥳 - With the BTT Manta M5P, you get the power of a Raspberry Pi *built right in*. No more external boards cluttering up your setup—everything is clean and streamlined. 2.…
I designed this Gridfinity bin to organize my small woodworking shop. This 1x3 Gridfinity bin holds the Hongdui JF06 Kerfmaker. The bin has no stacking lip but holes for magnets on the bottom. Model was created using Fusion360 and the…
I'm restoring a Makita LS1040 Compound Miter saw for a friend, which also needed the kerf boards replaced. These fit the LS1040. Many other Makita saw models have screw down kerf boards which seem like a better design that this.
Remix of H2T 103665 battery model to fit the makerfocus 3000mah battery
UPDATE: Added longer version of Z probe for longer hot ends. This replacement X carriage bracket and switch arm allow you to mount a servo-actuated Z probe to your MakerFarm Prusa i3v printer. The Z probe serves two purposes: it registers…
The new MakerFarm Prusa i3v printer (with the aluminum V-Slot extrusions) is solid and smooth, but the end-stops leave a little to be desired. The Z stop requires splitting the wood and is still difficult to get aligned to engage the X…
Remixed version of https://www.thingiverse.com/thing:145065 with increased width to accommodate a 80mm fan. NOTE: It will be tight under the stepper motor, but it will fit. Just. Print instructions NOTE: It will be tight under the stepper…
Replacement kerf board / blade guard for Mikita LS1214 12” SLIDE COMPOUND SAW. Part number 415209-5. Need at least 300x300 build plate to fit it. Category: Replacement Parts
A Gridfinity compatible storage tray for the Bridge City centre scribe and a Kerfmaker.
My watch made for the special Brno Maker Faire event Print parameters Nozzle: 0,4 Supports: NO Material: PLA, PETG Infill: 40% Wall Count: 3 Don't forget to follow my profile so you don't miss anything. It costs nothing and made me happy.…
Here are the parts I use to manage and hide the wires on my MakerFarm i3v printers. The cable clips snap into the grooves of the V-Slot extrusions to hide wires inside. The end strain relief mounts to the end of an extrusion with a 5mm…
The cleaner has some play in this so it can move around when the printhead moves. Print Settings Printer: Maker-FR - I3-RS32 Rafts: No Supports: No Infill: 10% Filament: Prusament PLA Black Galaxy Category: 3D Printer Accessories
Case for Makerfire USB Tester (URL below) https://shop.makerfire.com/products/copy-of-makerfire-usb-tester-type-c-meter-detector-checker-dc-0-30v-0-6-5a
The Nunchuck gets a nice "click" when you push it in. My display display placement was a bit crooked: both the LCD panel on the PCB and the alignment of the display PCB with the main PCB. Because of that, there is a bit of a gab and the…
The file contains replacement knobs, and a replacement pin. The replacement pin is for the shorter screw. Use one M2 screw and nut for the short screw, and one M3 screw and nut for the long one. It is normal that the M3 head seats over…
This is the 3D model of the tiny Makey Robot distributed during Maker Faire Paris 2026.
* There is a newer version available here: Itty Bitty Double FLEX V2 Extruder * The Itty Bitty Double FLEX is the second iteration of the Clough42 Itty Bitty Double Extruder. This new version is designed to accomodate flexible filament…
Note: there are two versions of the switch bracket. Choose the longer one if you have the newer endstop switches with wheels on the arms. Note: this part fits the 8" i3v. The 10" printer has longer X extrusions that block the screw unless…
Designed for approximately 18cm diameter inductive sensor ( http://a.co/9wMezOl ). Uses the existing 15mm M3 screw on the X carriage. Print Settings Rafts: Doesn't Matter Supports: Yes Category: 3D Printer Accessories
Mount for a radial fan (XYJ05S5015H) for part cooling on a Makerfarm i3v (10"). It is mounted on the two hotend screws, on top of the hotend fan. This fan provides a lot of air, so a silicone sock on the original E3D v6 hotend lets you…
Replacement kerf insert for Scheppach HM90SL miter saw (Printed in PLA + ironing topmost surfaces)
This is an OpenScad parametric design for a screw based micro adjustable Z stop for the Makerfarm's Prusa I3v. It works great on my machine but if you want to change it just tweak the parameters and recompile in OpenScad to generate the…
Note: there are two versions of the switch bracket. Choose the longer one if you have the newer endstop switches with wheels on the arms. Note: this part fits the 8" i3v. The 10" printer has longer X extrusions that block the screw unless…
The MakerFarm Prusa i3 suffers from the same ailment as most Mendel variants: the Y axis is noisy. The combination of the linear bearings on rigid rods with the bed stack of wood, heat bed and glass causes a loud, buzzing resonance at…
I never printed it (yet). Print Settings Rafts: Doesn't Matter Supports: Yes Category: 3D Printer Parts
I only wanted to use FlickerFixer PCB from Cybervision 64/3D so I needed to make bracket for it. Bracket was made with some openscad PCI bracket project, then I modelled some support structures on it with freecad to make it more sturdy.
Rough model of the MakerFocus 1100mAh Battery. Use it to help your modeling project.
Printer link: https://www.makerfr.com/en/printer-3d/i3-rs32/presentation-de-la-i3rs32/ Print Settings Printer: I3-RS32 Rafts: No Supports: No Resolution: 0.20mm Infill: 20% Filament brand: Prusament Filament color: Black Galaxy Filament…
This upgrade is good to make your printer quieter. The difference is noticeable. I used M3 5mm screws for screwing the dampener to the motor and you can reuse the screws that are used before to screw it to the 3d printed model. Here are…
These parts allow you to mount a Raspberry Pi camera with LED illumination on your MakerFarm Prusa i3v to observe the bed of the printer. It's perfect for use with OctoPrint on a Raspberry Pi as a network printer controller. The bracket…
This is a mini version of the case for Makerfire Tester Case. https://www.printables.com/model/392853-makerfire-usb-tester-case There is no space to store user manual.
I bought some Makerfire gates from Good Venture Drones, they have hooks to hang them and I was thinking about stapling them in the house here and there for a track but decided that would be a PITA.I then thought about a stand with feet,…
Replacement plate to allow the installation of basic delrin nut blocks on a leadscrew upgrade for a Makerfarm I3V. While not a complete solution, this allows you to continue to use the back plate that holds the other end of the idler…
