Liczymy pasujące modele…
Two-way and three-way 90 degree connectors for openGrid regular/standard, based on the designs by KYZ Design (see remix links). Original angled snap-in connectors were aligned for use with openGrid heavy, and while they do work with…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
Customizable Led Text Display & Source of Light 2 in 1 Make your own Led Light Text, using CAD Software Guide: 1. First make sketch of your text, recommended text height is 40 mm 2. Measure your whole text width, if its for example more…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena jednego wariantu
Introduction In case you are not familiar with why hexagons are mathematically and scientifically the bestagons, please first familiarise yourself by watching this video: And with that out of the way, here is another unnecessarily…
8 sizes of display shelves for your Honeycomb Storage Wall. The clip mechanism is fairly tight, I do not suggest you use high stiffness filaments such as ABS-GF, and for the bigger shelves, it's probably not a good idea to use low…
Hi! I have made free-standing HSW walls before using these foot pieces that attach to any wall but I wanted something more sturdy and more built-for-purpose and this is what I came up with. Enjoy! Print setting recommendations Print the…
Introduction I designed these as I've had a few requests for bowls after I released the “HSW round shelves” model. You don't need a HSW (Honeycomb Storage Wall) to use them as they have flat bottoms. The size denoted is the widest part…
Dear Zach Freedman, if you are reading this, I plunged into 3D printing after watching your videos, thank you for the inspiration! Introduction Here is another unnecessarily over-engineered project! I am just going to design with screws…
Introduction This is used as a replacement base for this display stand - please go to this model page for general information. Compatible with standard (42mm) Gridfinity modules. Uses the same TPE/TPU feet as the original display stand.…
Introduction Soon after the release of the KYZ HSW Display Stand , many requests were made for a height extension to increase the storage area. This adds two sizes of extensions: 7 hex extension for an 165mm height increase 9 hex…
Oh yeah, I over-engineered the hell out of this one! I went through more than 12 iterations and I think this is going to be my final version. The main challenge was designing outer walls that print without a million retractions so I…
Introduction There is a rumor being spread that hexagons are the bestagons. However, this is fake news because triangles are actually the strongest! If you have extended the height of your KYZ HSW Display Stand and have attached heavy…
In order to protect the builtin OLED screens from sunlight as well as the lenses from scratches in the case, this thing fits over the lenses of the Skyzone SKY04X FPV goggles. I haven't found a solution to clamp to anything in order to…
Introduction Pretty self explanatory, put your stuff in here! The collar can be positioned at different heights relative to the cup to accommodate different item sizes. The size refers to the internal diameter. Designed to fit onto HSW…
Walksnail VRX adapter for Skyzone O4X goggle. Also include exhaust without mount for remix to other adapter
Skyzone 04x V2/Pro Fan Cover GoPro Mount Features: Designed to mount a GoPro “Unicorn” style on the Skyzone 04x series Goggles M5 screws and nuts needed Mount tilt: 60° upwards Print Settings Printer: Creality Ender 3 Filament material:…
This is a cover for the Skyzone Steadyview X receiver with screen and jog wheel that fits the HDZero goggles analog module bay. There are two versions, one with fan mount and one without. The Skyzone receiver comes with a fan but none of…
Remixed from https://thangs.com/designer/Mender/3d-model/skyzone04xPLATE.stl-929465 . This is a simple hexagon fan grill cover for the secondary VRX slot on skyzone's 04o pro and 04x pro goggles. I wanted to remove the unnecessary SMA…
Module Cover for Skyzone SteadyView X. For proper contact you must extend the module pins a little bit. Use TPU! I think PLA, ABS or PETG wont fit. Material: TPU 95A Layer heigt: 0.2mm Infill: 90% Support: True
(This shell of this model probably has a decent amount of inaccuracies and a whole lot of incompletion, use with caution) Should work for the O4 X,L, and O. The electronics are simplified but accurate dimensionally. The shell... was the…
Introduction Adds an additional middle panel to the KYZ HSW x Gridfinity Organiser - Mini . This adds 7 hex extension for an 165mm height increase. Please common sense in designing your tool board or display - don't put heavy things right…
This 3D print file is a Walksnail VRX holder designed for easy attachment of the Walksnail VRX to Skyzone goggles. It offers a flexible mounting solution, allowing you to securely fasten the VRX to your goggles. Additionally, with the…
2S battery holder for the Skyzone goggles with a velcro strap mount to secure the cells. Print in PLA / PETG.
WIP Update 1 Only modeled the tallest IC's for now, but that should give an idea of the min clearance needed. Standby for more details when I have the time as well as the SKY04L module bay cover (I'm wondering if it's the same as 04X?).…
Nice for transport when not being used. Print in TPU.
Introduction Pretty self explanatory, put your balls here! The size refers to the ideal diameter of the ball you are storing. Measure your ball and round up to the nearest size. Designed to fit onto HSW (Honeycomb Storage Wall) boards.…
The new Fusion Board for the V3.3 Steadyview receiver in an ELRS version is a bit longer than the regular one. The standard cover doesn't fit. This is a custom made cover that fits the new ELRS Fusion Board.
Fan cover holder with antenna triple feed clamp mount on SK04O Sky04L Sky04X and EV300o
It's a mix of 2 things. 4946834 + 5039701 = this remix (5196877) ===update/add==== 01.17.22 : add stl for TBS fusion VRX Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Doesn't Matter Supports: Yes Resolution: 0.12…
Fed up with cables hanging off your face? Worried about the HD-Zero power cable frying? want to be able to easy switch between analogue and digital? This is my design for a module to fit into existing googles that you can feed power in…
I found on Tinkercad a 2S 18650 battery holder using the “skyzone” keyword. I liked the fact that it was designed for a back-of-head position and also for 2 18650 cells (not so heavy for the head). I made some modifications in order to be…
Printed settings PLA Support everywhere Use rubber band to hold any antenna of your choice. Followed Albert Kim's idea to secure the rubber band on the notches (see pic)
This cover is designed to fit the Cobra X goggles to cover a SpeedyBee receiver. I printed PLA at 20% infill. I'm sure it would work with other filaments as well.
A quick remix of https://www.thingiverse.com/thing:4830132 I needed to fix my 7 turn helicals antennas a little up to balance better the google in my face.
Printed this model in PLA+ but any other filament should work as well. I used M2.5*12mm screws to secure vrx and M3*40mm to connect two parts.
* Update 1/22/22 * Added a stretched version of the fs_buddy design so stubby antenna can fit on the sharkbyte vrx and not interfere. * Update 1/17/22 * Added file fs_buddyfor04xwcap. This file is the fan cap, with an fs buddy attached to…
I several small modifications to make it more sturdy less prone to breaking the clips and some changes for V2
Idea from here: http://fishpepper.de/2016/09/04/fatshark-skyzone-fpv-goggle-diy-battery-pack-using-18650-cells/ Housing to fit the Skyzone googles. Take long cables, so you can wear the housing on the back side of the head. It also fits…
Hey everyone, this model is super easy to print, needs supports only for VRX mount, to complete the assembly u will need one 4.5x3mm m3 threaded insert and one m3 bolt.
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: PLA / TPU
Based on the great dessicant spool holders by @kyzdesign Resized to fit the new Sunlu spools. Note that all parts have been resized, so you will need to use funnel, key, etc included in model Best printed in PETG for maximum compatibility…
I bought two Floureon Lipos for my Skyzone FPV Goggles. To easy change and hold the lipo on the googlestraps, i designed this lipo holder. Install: clip the lipo holder on the googles straps. You can leave it there. to swap lipo, just…
This is a copy of the the foam which is being provided with the Skyzone SKY04X bundle. This is for the smaller, more narrow face plates.
I want to use a FuriousFPV V4 module with my SkyZone Sky02X goggles, so I made this external module bay to fit the goggles design. I'm still waiting my module to delivery, that's why I don't have any final photo. I'll put some updates…
Remix of paired lens cover for SkyZone SKY04X.
SpeedyBee Receiver 5.8GHz Adapter for Skyzone 04X Pro Modular Bay This is a custom-designed adapter that allows you to mount the SpeedyBee Receiver 5.8GHz into the standard modular bay of Skyzone 04X Pro goggles . It ensures a secure fit…
Cover is holding by foam light blocker. Typically they should be installed.
This is a remix from https://www.thingiverse.com/thing:2922203 I made it 1mm thinner so it is fits on SKY01 now. And it is more flexible you can print with PLA and it will not break when you bend it during installation. It has a hole to…
I want to use a True-D V4 receiver on my Sky04X, so I decided to try to fit it. The board of True-D needs to be a little sanded to fit perfectly inside the bay, but it fits. This cover uses the original bolts and fits from True-D v4.…
Model This is a remix for a Skyzone SteadyView, make sure to look online for instructions on how to do this mod and double check everything before powering it on. Parts needed 1x 5V 500ma plus step down converter that can accept 11.1 to…
You'll need the rest of the parts from the original https://www.printables.com/model/924059-kyz-hsw-display-stand-large
The 2 Files allow you to mod your Skyzone V01 Goggles to use external RX Moudlues instead of the internal diversity. This is a reupload of my original files i posted on thingyverse some time back… Here is the Manual on how to do the mod…
This is a 2S battery setup for my Skyzone Cobra FPV goggles. I've mounted it to the back of the standard head strap, which I've found to be the most comfortable arrangement. The battery case is designed with a groove for easy attachment.…
HDZero Goggle + SkyZoneSteadyviewX cover (Extended for stackable pins)
After a lot of hours of trying I've finally created this thing. The goal was to have a Fan and a on/off Switch on my Skyzone without modifing my goggles itself and without loosing warranty. Every button is still usable (even better then…
Replacement part for awning rotation handle. You can see broken part in pictures. I printed it from carbon fiber.
skyzone cobra sd sun protector
i wanted to mount the Fatshark Faceplate on the Skyzone. So i designed a clip and printed it with my Mendel90 3D Printer. You can buy it here: http://bit.ly/skyzone\_clip Here you can the the article about that mod on my blog (german) On…
Skyzone Cobra X v4 Lens Protector + Case/Box: PETG Layer height 0.24 9h Shaft diameter 1.6mm Magnete 5*3
Print at the angle, like on the image, so it has some strength along the loop too
I tried to order corrective Lenses for my DJI FPV Drone (…
This holder will hold your coasters! ---------------------------------------------------------------------------------------------------------------- I 3D modeled this model because I didn't have a coaster holder (Max diameter of coaster…
metalnow made a great attachment for the 9xR transmitter mount. I needed it to fit my slightly differently shaped SkyZone SKY-700D. The screw holes on the back don't do anything, but the screw hole on the bottom holds a 1/4" bolt and it's…
There are 2 versions: light (1 prong, see photo) and sturdy (3 prongs). Both work with O4X and RunCam WifiLink 2 VRX. Use an M3 screw and a nut to secure. See the zip archive for the FreeCad source project. Fit is perfect printed in…
print the model twice. I recommend TPU. If you don't have TPU maybe scale it up by 1% so the tolerances work
I created this super simple clip for SKY02S to keep them always quickly accessible on my backpack. It's made to fit 20mm wide strap. It may not survive running and rolling on ground, but for calm walk between spots it served me great.…
KYZ made the best on spool desiccant holder there is, imho, but I have some spools with larger holes that they don't fit. Specifically, this is designed for Sainsmart TPU spools. It may work with other spools, but I can't say for certain,…
Very simple, easy to print (no support) very “friendly” use to clip your pencil on the ExWall. I suggest to print in ABS or PETG to get best strenght and flex of the “elastic” hook for the pencils Printed in green ABS on Bambu Lab X1C,…
This vTX antenna mount was inspired by Exen's Designs Orca frame. Below is an ELRS RP1 mount that will snuggly fit the PZ5 frame:
i just fixed the version of diepie and added some radii The model not in the right dimensions and also broken But thanks for the design! really usefull Please upload a photo of your make. This design is not for commercial use or selling!…
This is a container for storing moisture absorbing pellets in a sealed container - according to the design: https://www.printables.com/model/760336-kyz-ff2-high-flow-desiccant-holder While using it, I felt the need to store dried pellets…
"Wedge" to provide a flat surface for mounting an external receiver module using double sided 3M sticky pad between the module and the wedge. Uses the original goggle SMA connector with nut over it to hold wedge in place, other end hooks…
21700 powerbank case for skyzone. modeling by me. use 2x 21700 battery and 2s type-c charge module
A one-piece mount that puts a Skyzone M5 FPV monitor on top of a HelloRadioSky V12, with the M5 screen facing you, so you can see the monitor and the radio's own screen at the same time. It doesn't modify the radio at all. It hooks over…
Add an adjustable 3 point head strap off AliExpress for ~$25 to your SkyZone 04X Pro googles! For the price this is an amazing piece of head gear. Very comfortable and the top strap is a must. It also gives the option to use DJI…
With this backplate the draco ground unit is mountable on this Sky04x Mount: https://www.printables.com/model/854805-skyzone-04x-walksnail-vrx-mount You need a M3x8mm screw
This is a 2S battery setup for my Skyzone Cobra FPV goggles. I've mounted it to the back of the standard head strap, which I've found to be the most comfortable arrangement. The battery case is designed with a groove for easy attachment.…
Print at the angle, like on the image, so it has some strength along the loop too
Customizable Led Text Display & Source of Light 2 in 1 Make your own Led Light Text, using CAD Software Guide: 1. First make sketch of your text, recommended text height is 40 mm 2. Measure your whole text width, if its for example more…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena jednego wariantu
Cover is holding by foam light blocker. Typically they should be installed.
This vTX antenna mount was inspired by Exen's Designs Orca frame. Below is an ELRS RP1 mount that will snuggly fit the PZ5 frame:
Module Cover for Skyzone SteadyView X. For proper contact you must extend the module pins a little bit. Use TPU! I think PLA, ABS or PETG wont fit. Material: TPU 95A Layer heigt: 0.2mm Infill: 90% Support: True
Introduction Soon after the release of the KYZ HSW Display Stand , many requests were made for a height extension to increase the storage area. This adds two sizes of extensions: 7 hex extension for an 165mm height increase 9 hex…
