Liczymy pasujące modele…
Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…
Und ein weiterer Akkuhalter für die Makita 18V Serie. Dieser soll sich etwas abgrenzen da er einerseits als Halter aber auch als Schutz für den Akku dienen soll. An der Unterseite ist eine dünne Schicht die dazu dient das er als…
Mounts for Makita 18V/14.4V LXT battery and tools. Loose fit, easy to mount and unmount. Printed in PLA. Other plastics may have a different shrinkage rate, so model adjustments may be needed. Print instructions Rafts: No Supports: Yes…
Hier haben wir eine Wandhalterung für 18V Makita Akkus in der angewinkelten Version. Durch die angewinkelte Halterung lassen sich die Akkus angenehmer einlegen und entnehmen als bei den normalen geraden Versionen. Es sind Versionen für…
Wall mount for Makita 18v Lithium Ion batteries. There are many others on the web but this one has a tighter fit and a slightly smaller footprint. Print with supports, so that the guide rails on the side are properly printed. The holes…
Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…
A track saw square for the Festool Track. Installed with dovetail interface and no moving parts. The square has fairly tight tolerance and the dimensions are based on the three tracks I have access to. I do not know if this will be…
Just a simple interlocking batter holder for the popular Makita battery operated models. If you have a few of them like me, they don't stack well and tend to be everywhere except when you really need one. I was able to print six at a time…
Thanks to blueOcean for making this tool mount. I traced it in OnShape and removed the french cleats and added some screws. The charger fits perfectly. Don't mind the multiple colors, I ran out of filament in the middle of the print.…
This is my designed version of the Fastcap Rail holder. This has a a design where the cam is print in place. So no extra hardware is needed to set up the lock. This should fit most track saw rails. Kreg and Bosch will need some editing to…
A battery carrier/tote for Makita 18v batteries. It's stable and won't tip over even when fully loaded on one side. I've included two versions. A low profile one, with almost no space under the batteries, and a high profile version with…
I created this model for a friend, as he didn't like the much simpler wall mounts like this as they utilize the holes of the rubber feet, which have to be removed. And the charger is fixed permanently to the wall and can not be quickly…
Akku Halterung für Makita Akkus
24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware
Tool mount and dust shoe for the Makita 700 series palm router or the Sienci AutoSpin T1 and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the…
The original MAKPAC is expensive, so why not after all 3D print it? Yes - possible, but there are no models available and 3D printing a 30x40 cm piece will cost you almost the same as buying an injection moulded part. Also most printers…
Holder/Mount to store Makita 18V Tools, like Lights, Multitools, Angle-Drills or Angle-Grinders upside-down on walls. With an additional integrated battery or hand grip storage above. I also have a dual version of this holder in my…
If you've ever wanted to make use of those Makita LXT 18V batteries, you are going to want a solid and clean way to get to the battery terminals. This 3D print provides a plastic plate that slips onto the battery, snapping on just like a…
Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 26 March 2023…
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the hose zipped in initially but it will soon conform to the curves…
1/4" hex shank bit holder for Makita cordless drill. Magnetically holds 5 bits and can hold extra screws/bits underneath. Print instructions Printed Materials: makita bit holder.stl Non-Printed Materials: 1 - M4 x 14mm screw (…
I have now published the carrying aid/storage box for 2, 4 and 6 batteries. What do you think is still missing? Update: 2023-02-16 - Carrier for 2 batteries 2023-12-20 - Carrier for 6 batteries
In an attempt to get more organized with my tools and batteries, I wanted to make something that I could use to store the batteries as well as use as a way of easily transporting the batteries when I have to take them with me. I have…
This remix accommodates larger screw head sizes at the expense of a 33% increase in bracket thickness. Uploaded as a STEP file for easy adjustments. Print 2x in PLA/PETG (or ABS/ASA for higher temp tolerance) with 10-15% infill. See…
Complete redesign of 3DDIY's nifty print-in-place guide rail holder. As I wanted to hang my rails on a garage door, I needed something a bit stronger and more secure. Also wanted to be able to mount these with the rubber strip facing up…
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…
This is remix of: https://www.thingiverse.com/thing:4097627 . Please note the natural shrinkage of the material and add 1% in the slicer if your filament shrinks a lot after printing. Enjoy ! Print Settings Printer Brand: Creality…
A holder for makita 18v batteries, Compaired to other models this one is very fast to print and does not use much plastic at all but still locks in place. Recomended to be printed laying down with supports Print Settings Printer Brand:…
Keep your Makita batteries organized and within reach with this battery holder. With a quick 2 hour print time on a Prusa MK3S+ using Prusament PETG/PLA, this holder uses minimal filament (7.2m/22g) and requires no support or…
The makita charger doesn't come with any keyholes on the back to be able to mount it to the wall. This little print solves the problem by replacing the stock feet with ones having a screw hole protruding the base of the charger. I…
My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…
Hello. These are Makita 18V Battery & Drill Mounts that is developed through meticulous measuring and testing to get the design accurate and durable enough for everyday use. These were designed, developed, and printed for every day use in…
If you are interested in this product, you can search for this code on Amazon: B0DQVBH1NB Youtube:bMESK551y4g
This is a makita battery mount for 18v Batteries. This can be attached to the wall, and firmly clicked in.
A Makita tool holder, that is made so it use very little plastic. but still durable. It can be used on a wall, under a cabinet or table
I was tired of my batteries scattered around the shop so designed this mount that could be installed in multiple orientations depending on your storage needs. Design allows battery to snap into mount and have a solid connection. There are…
Parts are print oriented with no support. Only OBI Cap 2colors is not print oriented. It need 1pc M3x16mm and original connector 643852-2 (3,5 euro from Makita). Fusion360 file can be use to modify the model or import in other projects.…
Rigid timber can be made to bend easily when laser cut with a specific pattern. I wanted to try 3D printing with this pattern and I'm pleased to report that it works quite well. There are three aspects here. Some models are the results of…
this model has the tightest tollerances on makita's original battery. tested in the field by more than 20 people some of them change batteries more than ten times a day ! in the first layer, the holes for the screws are also filled in…
This end piece clips very easily on Makita saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. Faced down. No supports. Here’s the Festool saw track bumper:…
I designed this holder to attach my charger to the wall. The rubber feet must be removed and the housing screws unscrewed. After that, the holders are placed and screwed in again with 4x40mm or 3,5x40mm countersunk screws with a rough…
This is an enlarged base for the opoular Makita RT0700 Handheld Router. It makes it easier to guide the router on narrow pieces or at the edges. For a full description see my blog:…
Simple wall mount designed to hold Makita 115 mm angle grinder - DGA452Z. Should also fit other similiar grinders with guard diameter less than 145 mm. I used three 4.5 mm countersunk wood screws to mount it MDF board. Attached template…
Makita 18v battery adapter Holes for 5mm bolts
A short flat nozzle for Makita 18V blower DUB185. I made this for drying car/motorcycle after washing, but someone may have another way of use. I made 2 versions that have different opening area (740 mm2, 538 mm2). I'm still testing which…
Hello, here is my idea of a Makita battery holder. I have seen a lot of holders, where the battery is resting on the round shaped area (red marked at the attached picture), but for me it seems that this area is not realy suitable for a…
Battery terminal for Makita battery 18V. Designed to fit the battery mount by GPlatek https://www.thingiverse.com/thing:352094 Redesigned / Remixed from https://www.thingiverse.com/thing:863257 so that it is much easier to create the…
To electrically connect to a Makita 18V LXT Battery, you will need some metal pieces correctly shaped and aligned to reliably and robustly clip onto the battery. For most, 3D printing can assist in printing the plastic component, but for…
A mount that allows you to organize your makita tools! Model includes built in supports so no need to add for overhangs. Have included two versions. One that matches my design for battery storage and a Low Profile one that prints in just…
This is a remix of ShapeLabs's track saw hose deflector design, which was then updated by Mak-E-Verse and made compatible for Makita tracks/rail guides. Both original designs are based off of the Festool FS-AW available for their rail…
This is a tool holder for Makita 18V tools. I have developed it on a normal holder. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Makita Logo upwards Legal information: This…
Allows you to use Makita DHS680 on makita guide rails.
Makita offers this storage container product with or without the matching insert boxes. It's cheaper than the usual organizer of this kind, and interlocks with other toolboxes as well. The container's internal structure provides the usual…
A set of saw blade holders for all common electrical jigsaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting…
Simple holder for keeping the wick tight and in the center of the candle mold. Toothed design with clamps is adjustable for different sizes of the molds. Holder sticks are prepared in lengths 62mm, 92mm and 122mm. Print a pair of sticks…
They can be assembled with binder clips to form different sizes of rectangle and different sizes of squares by different combinations for different size molds. Can be stacked to make taller mold.
These are mounting blocks to mount your makpac boxes to something. I built them to mount my makpacs to a roller board. They are designed to fit on a 300x400 mm board. To mount your makpak just press in the front side, and the push down…
Wandhalterung für einen Hand-Druckluftkompressor der Marke “Makita” Typ “DMP180”. Die Idee dazu hatte ich beim Entdecken der aufgeführten Vorlage. Allerdings hat der DMP180 im Gegensatz zum DMP181 völlig andere Maße, sodass ich alles neu…
A bracket which when printed as a pair can be used to hang a makita DC18RC charger from the wall To mount the charger to the brackets Remove the 4 rubber feet Remove the screws holding the charger together (unplug it first and don't lick…
A low base for mounting a makita akku tool upside down without a belt clip. - no support - PETG - Altered for new akku tools
Guide rail adapter for the Makita DSS501 (18V compact circular saw) Turn Makita's smallest 18V circular saw into a track saw. This adapter lets the DSS501 run on Makita guide rails, and on similar rails from Festool and other brands, for…
Wall mount for the Makita vacuum cleaners DCL 180/181/and i assume 140/141/182/281/282. In other parts of the world also known as XLC Different from other wall-mounts this one grips the body higher , just under the motor part. Makes it…
This cover/cap is for the Makita 18V X2 (36V) LXT Brushless 6-1/2” Plunge Circular Saw, model XPS01. The cover is very precise. It will keep dust from escaping through the side opening, thus improving dust collection. Be sure to check out…
Just print with the outward face on the platter and it should be all good ! Feel free to also check out my wheels file here .
Habe einen Akkuhalter für Makita 18V Akkus designt. Diese werden mit 2 Schrauben an die Wand geschraubt. dafür sind die 2 Öffnungern. Ich drucke für Produktivität und nicht für Design. I designed a battery holder for Makita 18V batteries.…
This is a battery holder for Makita 18V batteries. I have developed it on a normal battery. Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the print settings:…
Remix of very nice and slim Makita tool holder. As I consider it to be better printed standing up, I filled a gap in the middle, giving it also a bit more strength. I've also added small chamfers, so when tool is taken out, sharp corners…
0.4 nozzle, 0.2 layer hight and 0.6 line width for faster print speed The model are optimized, so it don't use so much plastic. And, if you make it, make a make. I would really appreciate it. Or/and PUSH the ❤ button.
0.4 nozzle, 0.2 layer hight and 0.6 line width for faster print speed The model are optimized, so it don't use so much plastic. if you download please give a ❤, and if you make one, post it. it’s all very much appreciated.
For all makers out there making soft bates! Shallow screws are expensive and now with this tool you can make them yourself. Print instructions Video for how it works: https://youtu.be/zpEGzjKB8no Other needed components: Screw holder is…
Convert your Parkside X20V Team batteries for use in Makita LXT tools with this complete, user-friendly adapter solution . Why This Adapter? Unlike other designs, this complete adapter solution is tailored for seamless assembly, enhanced…
I made this remix of this bit holder with 6x 6x2mm magnets that is placed under the bit. Either insert a magnet under the bit and place it in the holder and press it against something hard for a friction fit or print the other version the…
Makita DVC750L vacuum adaptor for Makita DBO180
Brackets to hold the Makita dual battery charger to the wall. Print two of the lower brackets and one of the upper. Screw the two lower brackets into the wall, place the charger on them, and screw the upper bracket into place to hold it.…
Bosch PST 650 jigsaw. Makita BO 5030 sander. Makita 9910 sander. Bosch PKS 40 circular saw. 2 mm width. Category: Parts
A simple flat mount for the most common Makita chargers on the market, no need to try and line things up like with the single foot models or like the dual tilted ones. This model is easy to print and easy to use. To install charger, screw…
Lets hang your DeWALT / Makita drill gun under your shelf! Designed for DeWALT DCD791, but it works also with Makita 6270D and probably with other similar models from different brands. Be sure to check also my other DeWalt hanger holders:…
Adapter for makita/Festool guiderail which fits the Makita router. I used two dowel pins Ø8mm for the connection between the adapter and plungbase.
Just squeeze router on router base. Print with less support possible!
A simple slide-in, under desk holder for 18V DDF482 Makita drill. Nice for having a drill nearby but out of the way. Onshape file available here…
Hello maker friends, here is my workshop design for making bracelets, paracord or other fantasy of all kinds, have fun young and old with this support designed to be practical for making bracelets!! entirely print on mini <3 filament :…
If you've ever wanted to make use of those Makita LxT 18V batteries for non-Makita projects, you are going to want a solid and clean way to get to the battery terminals. This 3D print provides a plastic plate that slips onto the battery,…
I made these to fit into the little rubber foot holes on my makita chargers. If the holes don't print “EXACTLY” as tight as you need them to on your printer, I would advise using a small amount of masking tape to tighten up the fit. The…
My beloved Makita Cordless Drill needed a wall hanger. So I power-levelled my Fusion360 CAD skills to produce this decent model. I found an insanely good 3D model of a Makita drill online and then traced some shapes and extrapolated in to…
This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…
Pins and Tabs used for registration of multi-color relief prints. Print at least two Pins and then as many tabs as you need to do a print run. When printed the tabs should fit tight into the pins. This is by design. Depending on your…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** For Makita LXT 18V Tools only: This is a tool holster and organizer designed for…
Edit: I am an idiot lololol, not sure why my brain completely skipped over the fact that the tip of the hat needs supports anyways so I might as well have left the original design with the overhang since supports were going to be on…
Cordless tool battery adapter. Dewalt Battery to Makita skin tools Extra hardware spade connectors wire 9mm female terminal fuse terminal M3 x10mm bolt & Hex nut Prep spade connectors like this, flatten out the shoulders if you can…
Stack and clamp your Makita MakPac or Festool Systainer boxes on this convenient waggon for convenient transportation and for quick rearrangements in narrow shops and build sites at any time by simply rolling them around on wheels. This…
Remixed from another creator: https://www.printables.com/model/55510-makita-drill-bit-holder-magnetic Tested on: DHP485, DHP482, DTD152, DHP486, DDF485, DDF482, DDF486 I have modified the bit holder to take 5x2mm magnets inside the print…
Makita blower Nozzle DUB 185 Kurze nozzle um den druck zu erhöhen, ich nutze sie für die Arbeit, um meine Werkzeuge von Sägestaub zu befreien. Eignet sich aber auch, um ein Auto zu trocknen. Makita blower nozzle DUB 185 Short nozzle to…
Non-Printed Parts (2x) 2040 Aluminum Extrusion (I used 1000mm) https://www.amazon.com/gp/product/B08BCG1FT9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 (2x) 1/4 - 20 Bolts (1.5 inch) (2x) 1/4 - 20 Nuts (2x) 1/4 - 20 T Nuts…
EXPAND YOUR CORDLESS WORKSHOP TOOLKIT! Check out our other tools: - 100W USB-C Power Bank Adapter — Fast-charge laptops, phones, & gear on the go. - Portable Soldering Station — Cordless soldering station for field repairs & benchtop…
Printable without supports
0.4 nozzle, 0.2 layer hight and 0.6 line width for faster print speed The model are optimized, so it don't use so much plastic.
This is a custom battery terminal for fablab.ee's Makita 18V battery adapter. This is designed to be used with 6,3mm blade connectors (red, blue). Just crimp on the cable and push it through the hole in the terminal. My print is a…
Eine Wand Halterung für den Makita Akku-Rasentrimmer DUR181 . Präsentiere stolz deine maßgefertigte Wandhalterung für den Makita Akku-Rasentrimmer DUR181! Diese elegante Halterung wurde mit PETG-Material gedruckt und verfügt über eine…
