413 modeli
This is a digital 3D printable model of Mockingjay Pin from Hunger Games . The download contains 3D models ready to be 3D printed on a 200 mm print bed in STL and OBJ formats. It’s placed on the print bed as we would print it to save you…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
Everything was measured on my own device. In case someone needs dimensions.
This model provides a representation of the overall dimensions for the iPhone Duo, to evaluate how it feels in the hand, and whether or not it will fit in your pocket. It was modeled using overall dimensions announced by Apple (not a…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
This is mock-up model of HGX Lite 2.0 extruder (with oblique tooths). Outlines are just traced in Inkscape and extruded in OpenSCAD. Model is quite accurate. In OpenSCAD source you could find all coordinates of holes and motor position.…
Use this to rough-in your Tinkercad or Fusion 360 (or any CAD) designs that include this joystick. The measurements are accurate for the stick I used in MY design, yours may not measure exactly the same as mine due to differences in…
Heltec LoRa 32 V3.1 mockup model. Dimensions measured by hand. Accurate to about 1mm. Heltec LoRa 32 is a popular device for Meshtastic Project . However, the manufacturer provided drawing has wrong dimensions. And the free 3d print case…
This is the Mockingbird Mag , a high-capacity 3d printable slim angled talon mag with a bunch of different catch options to support as many blasters as possible. It uses Compound Mag (by RedCowl) geometry, but combined into a single piece…
made the CAD light with less surfaces to be used for your design proses of building a case for it
A simple feeder for garden birds with a mock tiled roof. There are various ways to hang it.
[V3 available now on MakerWorld: https://makerworld.com/en/models/1521236-phone-holder-for-hammocks-tents-rope-lines It's now even smaller and all tolerance issues are fixed] Hammock Phone Holder V2 - Now even lighter! New updated…
High quality, 1:1 reproduction of the Airpods charging case. Use it to design your own protector from TPU!
Couldn't find a suitable kit around for an important project car at work and most of the printable header mock up kits were difficult to print or had trouble with strength or used more plastic in supports than it did on the pieces. The…
Let your phone or stuff relax :) Printing Printed in PETG / 0.3 layer height PLA should work too (mat part needs proper bed adhesion) Print parts in given orientation Don't use supports or brim Assembly Also check out the corresponding…
For all the other the basic moms that have a giant Stanley quencher and a Mockingbird stroller … I dinged my Stanley quencher because it did not fit well in my Mockingbird stroller, so here is gravity holder that will hold that humongous…
A quick attempt at modelling a somewhat accurate LTT screwdriver based on the dimensions and sizes of my own LTT screwdriver. this model is intended for those who want to create their own cases/holders/whatever and need a slightly more…
print with brim for better adhesion
print thread side up 100% infill 0.2 mm layer height
Want to buy a new phone but are unsure what size to get? Print these mockups to get a feel for them in your hands/pockets and walk around with them for a day before you decide. Other available models: Google Pixel 9:…
made a mock-up for this board from Waveshare with POE-module and OV2640-camera so that I could build an enclosure around it. The enclosure can be found here Updates 2025-06-15: added LAN-LEDs and WS2812 LED locations
Add more top/bottom layers to cover the infill better. Also suggested to print it in bigger scale (print is detailed and i admit, not the best). As l am fairly new to this, ill be glad if there are any tips you guys can share about…
Airsoft only. Not for firearms. Barrel extension / mock suppressor for King Arms PDW 9mm SBR M-Lok airsoft rifle for extending the barrel for a 363 mm ( https://www.amazon.com/gp/product/B078SC421D/ ). First version broke at the thread…
Disclaimer: although this is already a working prototype, it is still a work in progress, mainly improving ease of print. I have more tools than batteries and hate leaving the connections exposed when I throw a tool in the toolbox, so I…
Update: Corrected spacing of mounting holes. Had a need for this and couldn't find it. So her you go.... Mockup of a 50mm x 10mm fan. Category: Other
The original creator for this created a wonderful design for a tracer housing or just a great mock suppressor. However, only long and short versions were available. This is a medium sized version of those in which is about an inch shorter…
Update 20240229: Added step file in case any one wants to do a bit of DIY. -------- I've been looking for a mock suppressor that: 1. Looks long but doesn't add too much to the overall length of the gun. 2. Slim but also fits a tracer…
This is a simple system of pieces that use 6mm x 3mm magnets to snap together for mocking up and routing exhaust or other pipe routing. This base design is set up to represent 1.5" outside diameter pipe, approximately 38mm. The splitter…
I'm trying to find the best phone stand for hammock camping and only one solution I come across is this :-) This Phone Stand fits for Coca-Cola, Fanta and all other common soda PET bottles. If you don't own a 3D printer and you want this…
Designed to fit in the Avengers QD Mock suppressor that is modeled after a Knights Armament suppressor. I had some problems with the “.20 SPEED” preset, but “.20 STRUCTURAL” worked fine. Mock Suppressor:…
Obviously not very official but if you are curious about electrical safety here's a probe for you. To preserve dimensional accuracy I split the finger so it could be printed without supports. Use bits of filament to align pieces and glue…
this is a ESP32 Cam mockup for further 3D constructions. it was not designed to be printed! I used it to construct cases like this
Printed with PLA. I use 80cm long 26cm diameter plastic tube as led, but it can vary depend on your need. The crocheted bed is around 80cm from one end to another, but it can adjust depend on your length of tube/stick, and position of the…
I make lots of 40mm airsoft grenade launchers, and I try to make as many of them taginn-compatible as possible. It's a lot easier to do that when I have a 3D representation of a taginn shell to use as reference in my design space. It's…
designed mockup model of TP4056 USB-C charging module for representation in bigger assembly
A Christmas Ornament for those in your life who are obsessed with the Hunger Games!
A mockup for 5015 blower fan.
Want to buy a new phone but are unsure what size to get? Print these mockups to get a feel for them in your hands/pockets and walk around with them for a day before you decide. Other available models: Apple iPhone 16:…
I am doing an engine conversion and wanted a mock up block. Found this excellent scale model on Makerworld, checked the full size dimensions and scaled it up 284.79% to be full size. I remove all the unneeded parts and then cut away large…
This is a mockup of the nRF24L01 Radio Module.
Cord/line max 3mm Bottom hole 5mm
Just a rough model of the Xteink X3 and X4 eink readers to check their size before buying. I modelled these based on the information on the website and the pictures I found. I don't have the devices so I cannot check how accurate they…
Mockup model for a clone of the LOLIN32 Lite ESP32 USB-C Board. The one I got the measurements from: https://s.click.aliexpress.com/e/_DnaBij3
UPDATE: I how have the Pixel fold and can confirm the overall dimensions are accurate however while the positioning and depth of the camera bump seems to be correct, in real life it extends about 1.5mm towards both the top and bottom of…
A set of M.2 form factor SSDs with both M and B key combinations. Also, S1 (1.2mm component height), S2 (1.35 component height) and S3 (1.5 component height + M and B-key versions are available. All other dimensions (including keep out…
This is a Beta hammock from thingiverse so you can support the og creator on https://www.thingiverse.com/rapharox/design . I cannot use thimgiverse on my printer so i have to reupload it as my class is getting a beta fish.
I made this based off some screenshots from the game reveal, the dimensions of my model should be either really close to the actual thing, if not better. I printed mine with 3 walls and lightning infill out of PLA and it seems strong…
Needed a mockup of a NEMA motor for testing a mount, but mine were 39mm, not 34mm, so I modified into this version from the one found at https://www.thingiverse.com/thing:207705 Category: 3D Printers
The Model is a click-on mockup of the HK-USP for the Nerf Jolt Printing: As seen in the first picture, i printed the Model with the sights facing up and support from the bottom to hide any scars they may leave.
I did my first custom water cooled PC recently and I had the idea to print dummy tubing to test out how I would do the runs. The dummy tubing pieces are of known length which really helps when setting up your bends for the real tubing.…
These are a scale mockup of the G1 glasses from Even Realities. These are so you can see if the glasses will fit and look good before spending the money on a real pair (especially if you have a prescription since they would not be…
I measured my own A1 and created a mockup to help me designing space around it. Others may use it as they like and need. Printer is modeled with bed extending to it's furthest range, both at the front and at the back. Measurements were…
This project aims to create a cat bed that is beautiful and inexpensive. In addition, all parts can be print without supports and require less than 60g of pla in total. I'm also including photos to help with step-by-step assembly. List of…
This is a simple system of pieces that use 18mm x 3mm magnets to snap together for mocking up and routing exhaust or other pipe routing. This base design is set up to represent 1.75" outside diameter pipe, approximately 44.45mm. In the…
MOCK SUPPRESSOR FLUTTED 14mm CCW THREAD (most common) 150mm lg 38mm diam. 9mm id for optimal extended barrel support
Mockups for Google Pixel 9 series. Can be used to test which size suits you best. (e.g. for QI-charger in car, mobile phone mounting on bicycle, …)
Mockup of Bigtreetech's EBB36 Gen2 v1.0 for use with modeling mounts, etc. Generated in Fusion 360 based off the images of the board on the BTTWiki. PCB components were pulled from GrabCAD and may not exactly match the product. Please do…
A mock of the AirPods to check for fitment.
This is a mockup model of the QTR-8RC and QTR-8A line sensors from Pololu. I made it to help me designing my new line follower and hope can be useful for someone else. Dimensions used were found on the Internet because I don't have the…
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Eine Trüffelattrappe für das Hundetraining. Schraubbar, um innen mit z.B. echtem Trüffel aus B-Ware oder mit Trüffelöl getränkter Watte den Geruch herzustellen. Dazu Löcher um den Geruch nach außen zu lassen. Die beiden Teile sind in der…
A mock-up of a Seeeduino Xiao microcontroller breakout board for design prototyping.
Want to buy a new phone but are unsure what size to get? Print these mockups to get a feel for them in your hands/pockets and walk around with them for a day before you decide. Other available models: Apple iPhone 16:…
Mocking Spongebob : Meme
iPhone 15 Pro Max mechanical mockup Includes keepout cone guides for camera sensors and USB-C connector. Developed in OpenSCAD and relies on a few external libraries. Github: [ psychic-winner/iphone_15_pro_max_mockup at main ·…
[V3 available now on MakerWorld: https://makerworld.com/en/models/1521236-phone-holder-for-hammocks-tents-rope-lines It's now even smaller and all tolerance issues are fixed] New version now available. Smaller, lighter, more angles:…
SSP18 mock suppressor Shoutout to “H6K2LH” for the idea. I need to mention that this is not a repost, I did make these on my own, so please, don't call me a copier. I made this model because I wanted a super cool looking mock suppressor…
Adjust the scale using print scale on your slicer, this model is 1:10.
This mock suppressor is compatible with the SMG body kit by XFoxGames. You can purchase that kit separately here . The micro stock should be compatible with hollow buffer tubes. The one I have pictured is a folding stock from Evike, but…
This is Hammock bubble level similar to warbonnet sweetspot and namagear UNLevel. It will give you a consistent hang, with about a 250 mm " differential head to foot end. Works best with zing-it ridgeline (1.75 mm size) It has an angle of…
I am doing an LS1 ZF8HP70 swap into a BMW E39 and wanted a mock up motor and trans to make initial test fitting a lot easier. Refer to my other models for the LS1. I found a good quality 4WD trans scan and some partial scan data of a 2WD…
Mockup of Bigtreetech's EBB42 Gen2 v1.0 for use with modeling mounts, etc. Generated in Fusion 360 based off the images of the board on the BTTWiki. PCB components were pulled from GrabCAD and may not exactly match the product. Please do…
We have a Mockingbird stroller, and there is a lack of printable accessories for it, and this is at least in part because there isn't an easy accessory holder for it yet. So, here we have it. There are a couple of different versions…
Airsoft mock supressor insipred by DTK 9mm. 15mm length 14mm cw thread. Printed with 0.1 height, worked well.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I've been thinking about modernizing this art form…
A set of Customizable Mock Suppressors for your KWA M11A1. I also threw a smaller “one piece suppressor” in. Combine them however you want. They fit a typical AceTech Tracer Unit. Supports are a little more difficult for this model. MS -…
1.3 Oled mockup model.
I added 4 center lines to help indicate the clocking position from one piece to the next, all the lines are 90deg apart. The lines are just a small feature and these will still work with the original version without issue. I also added…
Core Devices have launched a new Pebble Time 2. Want to see what it might look like on your wrist? Here's my attempt to get close to the model in the design reveal youtube video. We didn’t know the dimensions of the real watch when I…
This is a simple system of pieces that use 15mm x 3mm magnets to snap together for mocking up and prototype routing exhaust or other pipe routing. This base design is set up to represent 2" outside diameter pipe, approximately 50.8mm. In…
Adjust the scale using print scale on your slicer, this model is 1:10
Based on picture and datasheet. doesnt fold, just a folded versino and unfolded version
a remix from the nerf jolt USP pistol slide.
this is a mockup of the ULN2003 module Stepper driver for further 3D constructions.
The rear slides over the hop up adjuster and is open at the bottom so it doesn't interfere with MLOK forward grips. The rear part is held in by the front piece once its screwed onto the barrel thread. You will have to remove the barrel…
this is a mockup of the ESP32 LOLIN board for further 3D constructions. it was not designed to be printed!
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
Biqu H2 V2S Lite Extruder Mockup
Totally useless, cuts not at at all.
A mock of an ID1 card (a standard credit card), exact dimensions according to the international standard, ideal for photography. Its exact dimensions are 85.60 by 53.98 millimeters, with a thickness of 0.8 millimeters.
These models are part of the Big Plans 3D Printer System: https://lilmikey.com/printersystem/Mock.html These models comprise mock parts that represent many of the purchased parts used to build a 3D Printer including basic extrusions,…
A simplified 3D model of our heatsink, part of a cooler case for Raspberry Pi 4 model B. Use for evaluation of aesthetic only! To be used only with CooliPi 4B CASE. The real heatsink is made from anodised aluminium and is for sale at…
We made these 30/xx mm mockups as a cheap replacement for different lock cylinders for environments with low safety requirement like garden gates and others where you not neccessarily NEED a lock but don‘t want to see an eye-catching hole…
Official KIISU V4B Mockup Devboard (for Case Design) Files include .stl .3mf and .step Don't recommend printing, just use for reference.
Ridgeline hook for hammock underquilt. You can scale model to smaller size if needed.
Want to buy a new phone but are unsure what size to get? Print these mockups to get a feel for them in your hands/pockets and walk around with them for a day before you decide. Other available models: Apple iPhone 16:…
hook for hammock underquilt
![Arduino KY-023 Joystick Module [MOCKUP]](https://media.printables.com/media/prints/498437/images/4055346_2a20c205-6a4b-4ced-96d0-ed921285f9c6/ky-023-joystick-module.png)
![Hammock Phone Holder V2 [Old version, check description for new one]](https://media.printables.com/media/prints/582669/images/4663470_91478c1f-81a2-4074-8058-87f119204b7e/lighterhanger-v21.jpg)
![Hammock Phone Hanger [Old version, check description for new one]](https://media.printables.com/media/prints/567523/images/4544006_da238786-595c-4c11-af72-3fc94ce9ae77/secondhangerbetter-v17-2.png)
![#0172 Collapsible Hammock Tray [print in place]](https://media.printables.com/media/prints/924994/images/7221476_50bb558c-77c8-40e2-a0af-09ff8942e360_7906087d-22aa-47bc-b7cb-12dd01a2d18a/20240716_224543.jpg)
