Liczymy pasujące modele…
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
——————- Notification: motorized lift 2021 edition (v4) is now available and includes improvements over the v3 model https://www.thingiverse.com/thing:4751904 ——————- This is the fully revised version of the motorized lift for marble…
Update 9/7/25: Added a V2 version with improved grip pattern and tweaked greebling for multi-color printing. This remix has the same install instructions as the original model. Just unscrew the bottom two screws of the magwell, slightly…
Update 8/4/25: Added a couple more versions with slightly adjusted openings if the original is too tight or loose for you. Alter the scale in your slicer if you need further adjustment. Easy to print shroud that friction fits over the…
So, my crack at a shroud for the MPP, it sports two picatinny rails that are held in by dovetails and two cosmetic plates so you can color match a bit depending on your paintjob or in case of the original blaster just make it light blue…
Update 7/31/25: Added a closed version. I like to see the inner workings of a blaster so I designed this open jam door. No need to disassemble the blaster. Simply snap in place and secure with the original screw. Models are print oriented…
Update 11/13/25: Added scale adjusted files. These are slightly larger if you are unhappy with the original designs fitment. Includes three different versions ranging from sealed to protect your blaster from the elements to open for easy…
Carriage edited to hold 6mmx3mm magnets to hold in Gridfinity Bins
Motorized mouse , Just for fun. Be careful when removing the supports around the legs. My print settings(PLA): 0,16mm layers / 3 walls / 10%gyroid / Tree supports Happy printing:)
Wanted a replacement sleeper jam door for the XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU. This is a replacement drop in jam door replacement for the stock jam door. This adds an easier way to open the door and also gives you…
Actually, everything is self-explanatory: A 3D turntable: You don't actually need extra ball bearings. If you print the balls at a high resolution, it runs really smoothly. A bit of silicone spray, and it works even better. If you own a…
Motorized Coffee Grinder (1Zpresso K-Ultra) A video of it running A 3D-printed motorized housing for the 1Zpresso K-Ultra hand grinder, powered by a 12V universal car window motor and a 12V 30A LED power supply . This project converts…
It's my very first project. (please be gentle) :-) I tried to change the original with 'tinker cad' online For the settings I used : - Wall loops : 5 - Sparse infill pattern : Honeycomb - Enabled Support : YES Style : Snug
Gasket files for intake, NT carb and magneto. The clutch cover is not in dxf but can be traced from scanned file Enjoy! Let's make parts available for everyone.
This allows me to display or hide a bumper sticker depending on the situation. I wanted to speak out via bumper sticker but I am living in an area where it is still sadly commonly practiced. I would worry about my car being vandalized…
With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…
The Unity-of-the-Bee version of the electric interpretation of a manually hand-cranked grinder offers several practical advantages for any interested user: The housing consists of only 5 individual parts and has been optimized for a print…
Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.
I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…
IMPORTANT UPDATE: DON'T PRINT version 1.01 of the XL handguard. There was an issue resulting in a 3mm gap towards the rear. Please print the new 1.02 version instead. This issue doesn't affect the M and K versions. Handguards for the…
A handguard for the Motorized Piston Pump by XShot. There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom. Slides over the barrel collet from the front. 2 bolts clamp it down. .stl comes pre-oriented. .stp…
see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place. A (longer) handguard for the Motorized Piston Pump by XShot. There…
Edit 28-Dec-2025 : I apologieze that I forgot one complete subassembly. I missed the filament guide system. I added it today. Sorry for any inconvenience. First of all I like to kindly thank @GekoPrime for his development of the base…
Deciding to go for a more dynamic look for the earlier Drill hands for SS86 Devastator, here's a motorized version of it to give it some spinning goodness! This kit will require a DC motor with gear attached for each of the drill hands,…
Remix of Apex Marble Machine - Motorized Base posted to MakerWorld by Elegant Marble Machines. Remixed to utilize NEMA 17 Stepper Motor as drive motor. Circuit board utilizes A4988 motor driver driven by a 555 timer. 24v -> 5v by LM7805…
🎬 Video demo: https://www.youtube.com/shorts/SAGhfzj7YHM The main structural frame is laser-cut from 4 mm plywood on a CO2 laser cutter. The DXF file for cutting is located at rama_cut2.dxf. The frame is held together with M4 bolts. A…
the Print-in-Place Chain is to be put in the blaster with the open end of the chain link facing up it is able to click together with the original chain or more prints of itself the model includes sections of: a single chain link five…
It's my very first project. (please be gentle) :-) I tried to change the original with 'tinker cad' online For the settings I used : - Wall loops : 5 - Sparse infill pattern : Honeycomb - Enabled Support : YES Style : Snug
Intro: The Easy Linear Stage is a an open sourced fully printable linear stage and this version uses 28BYJ stepper motors to motorize it. The design leverage the same fully printed lead-screw just with an adaptor to the motors shaft…
This cam has room for a 608 bearing (standard skateboard bearing). This allows the axle to spin freely within the cam, which results in much smoother motion and makes the cam less prone to failure. I took advantage of the fact that akak's…
Collect is still accessible, and it locks the handguard in place, meaning no tools or other parts are needed. Other features include the free-floating design, front and rear Picatinny, and slim profile perfect for a C-clamp. I printed…
🧹 Motorlu Süpürge Başlığı (Dyson Tarzı) – DIY Bu projede, güçlü şarjlı süpürgemiz için motorlu ve fırçalı bir süpürge başlığı tasarlayıp üretiyoruz. Tasarım, Dyson tarzı döner fırça mantığıyla çalışarak temizlik performansını artırır. Tüm…
I created this lift for my television because I don’t have much space in my apartment, but I do have very high ceilings. The TV moves along a vertical pillar using a gear running on a rack, guided by aluminium rails. I used a 12V, 20RPM…
Motorized Coffee Grinder (1Zpresso K-Ultra) A video of it running A 3D-printed motorized housing for the 1Zpresso K-Ultra hand grinder, powered by a 12V universal car window motor and a 12V 30A LED power supply . This project converts…
As part of a collaboration between me, Built Over Bot , and Karen Chau Designs , I present to you this carousel! They were gracious enough to model some animals to put on the carousel! Built Over Bot's animals are included with the files…
I have some Bali branded ZWave motorized shades that came with 12V battery packs wired to USB micro B connectors (a great way to destroy devices that expect USB 5V power). The battery packs have 8 AA batteries each, and some shades came…
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I went through many iterations of trying to automate the bouncing action of our baby bouncer from using a cordless drill to rotisserie motor. I then stumbled upon this Reddit post which gave me a bill of materials, then I made some…
the model was printed in PA-CF. 0.2 Layer height, 6 walls.
This is a a motorized base for https://www.thingiverse.com/thing:66708 I remixed the base at https://www.thingiverse.com/thing:78218 to make the top part that interfaces with the gears (adding a corner that matches the base so it stays in…
Simple motorized wheel with 28BYJ-48 stepper motor. Box fits Arduino Nano and stepper control board. Homing is done with optical sensor CNY70. The wheel can be easily modified for different filter layout.
the turn table base has now been turned into a fully printable motorized turn table, only items needed are a 3/4 “ inner diameter bearing 1.5”od. the roller bearings are a part # 608-2rs. the motor kit is a part number of…
This slider is designed to have all the control electronics in the carriage. This allows you to make it as long as you want simply by stretching the tracks. It can be controlled via bluetooth from a smartphone or can be programmed to…
Inspired by the “Portal Desk Toy” by Ada Cohen ( https://www.printables.com/model/414209-botanical-portal-desk-toy ) I wondered if it were possible to make a motorized version of the sculpture. The mechanism I ended up with is a simple…
the model is small and simple …15*15*5 cm can hold up to 900 grams used components: 28byj stepper motor ULN2003 stepper motor driver arduino nano board jumper wires insert nuts M3 screws M3 so easy to assemble and easy to program i will…
This is a resin-printed chassis for a 1/87 scale semi-trailer truck. I used cabin and wheels from Herpa Volvo FH16, but it can be used with other models. (There is no 3D model of Volvo cabin in this project!) The goal of this project is…
With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…
I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…
This is a motorized turntable for filming small objects like table-top figures etc. in 360 degrees. It rotates with approx 1 rpm To carry the upper part it uses a ball-bearing tye 608 as used in roller-blades: https://amzn.to/2I64LYe The…
Motor mount for motorized bikes. Made for 66cc but should work for others as well. Designed for TPU but PLA and ABS will work all though I have not tested the durability.
Find out more about this project and additional files (source code etc.) at the blog post: https://blog.hirnschall.net/automatic-chop-sticks/ .
These are 3D printed parts for my Instructible to build a motorized ripstik: https://www.instructables.com/Motorized-Ripstik-Using-Hoverboard-Motor/ Category: Sport & Outdoors
Off course you need someone to safeguard your printer while you're away, and no one does the job better than a heroic Lemming Blocker! Fun and a bit challenging build, as I did not make any step-by-step instructions for this. However I…
A German pyramid is a wooden decoration that is traditionally used for German Christmas celebrations and now you can print your own! It's a really fascinating, eye-catching, interactive piece of holiday decor that you're sure to enjoy.…
The Unity-of-the-Bee version of the electric interpretation of a manually hand-cranked grinder offers several practical advantages for any interested user: The housing consists of only 5 individual parts and has been optimized for a print…
I recently printed and built this game only to be frustrated by the ball consistently flying completely over the game instead of landing in the playing field. This extension doesn't stop every ball from bouncing out of the but it does…
This is an Arduino NANO-based motor driven focuser. I've installed this on an 8" Meade Starfinder as well as a homemade 6" reflector based on an 8" Sonotube. The design include a mounting saddle and backing for both telescopes. Also, each…
This allows me to display or hide a bumper sticker depending on the situation. Why you ask? Well as a victim of MGM I wanted to speak out via bumper sticker but I am living in an area where it is still sadly commonly practiced. I would…
Tray and port that house a USB-C decoy board. When used with a real USB-C power supply, will supply 12v to your project with a 12v board. Boards come in 9v, 12v, 18v and 20v so pick wisely. After fitting the decoy, melt the back of the…
This is a 'Motorized bogie for OS-Railway' (https://www.thingiverse.com/thing:2644082) mount for Arduino kit motors. Don't know the specs of those. But they come in Arduino car kits and also in all kind of cheap RC toys. Category:…
Simple motorized blind, gearless, for those of us who don't have a perfectly calibrated printer. It's an addition to @Lush_727880's model, where the mounting method has been changed, eliminating the need for screws and attaching the…
This is a motorized Model Dwarf Multi Cannon from Old School Runescape. The original models came from User Engineer4fun. I used a Arduino nano to control the stepper. (Rotates 45deg then pauses at around 18 rpm just like in the game) See…
This is an adapter for Zemismarts motorized blind motor. It's designed to fit 28mm IKEA tubes that lack an inner ridge. I recommend printing it with the large flat surface down. I have only tested the adapter for 2 weeks so I have no…
Remix of CNC Kitchen's model for motorizing the following macro rail: The original project is perfectly functional, but I wanted to use a Nema 17 stepper instead of a Nema 14. In the process I also added a mounting bracket for the…
Replace the MountingPlate of your Highly Adjustable Ball Vise System https://www.printables.com/model/1109371-highly-adjustable-ball-vise-system with this PottersWheel. Choose your favorite working direction by rotating the Ball. For…
Use a stepper motor and the silent TMC2209 driver to give the tabletop a twirl. This project allows you to achieving smooth motion for filming your projects. With an OLED screen and rotary encoder, you can change the direction, adjust…
These are the parts necessary to motorize your 15lb hakka manual sausage stuffer. See the YouTube video linked below for detailed instructions.
I'm sharing an unfinished attempt to design a macro rail. At some point in the process of tuning it, I discovered CNC Kitchen's motorized rail and went on to remix his model for my needs. Perhaps it can still be helpful to someone.
This is a motorized phone holder that built to be used for OPENCV Object detection and keeping objects in frame of the video. The phone holding part is 14.1mm thick x 155mm wide which is big enough to fit an iPhone 15 pro in a slim case.…
Attention! This artifact works with potential harmful electric current. Be careful. A 10cm diameter turning base on a microwave motor.
The valve fits standard DN 110 tubes. (They have a diameter of 110m on the outside and aprox. 103-105mm on the inside). The 28 BYJ-58 stepper motor is a cheap geared stepper motor that can easily be controlled by a arduino or raspberry.…
I have the dream to make it better: contact me. In the future, I’d love to develop this into a complete 3D scanner , integrating advanced controls like a dual switch system for better rotation control and an IR LED to synchronize the…
This is a clamp mounted holder for a rechargeable bottle brush with charger built into the mount Mine uses type c so that's what it is built for. This is for rechargeable bottle Brush model# LEBHB1WH Print as shown in picture. I printed…
I had a large platter printed out of marble PLA for taking clean images on, but realized I wanted it motorized. Elkromo had a concept I liked so I modified it to suit my needs. Added some cable mgmt. Made it so you can power it via micro…
A friend brought me a broken motorized brush attachment for a Hoover H-100 cordless vacuum. Turns out the metal drive shaft melted out of the drive pulley for the motorized agitator brush b/c of long hairs getting entangled in the brush…
For an art project I needed a lightweight way to trigger spray cans with a motor. I am using a very lightweight (9g) SG-90 servo motor made for remote-controlled hobby planes. The trigger requires a lever to put enough force on the cap of…
I recently got into macro photography and my (pretty old) camera has no integrated focus stacking options and is generally hard to focus without moving too much. I first bought a cheap rail, but unfortunately that was a waste of money, it…
Dimensions are D: 200 mm, height is 25 mm. You will need: Fifteen 6mm airsoft bb's - for the axial ball bearing 1218GE-N20 motor - for the drive, such as this one: https://www.amazon.ca/dp/B08LL9TF91?ref=ppx_yo2ov_dt_b_fed_asin_title…
I wanted to create an over-the-top, tuner car–themed design with an exposed turbo engine, racing intercooler, quad exhaust, and hood vents. It turned out surprisingly comfortable. The body and button files include integrated supports for…
First things first, fantastic job by @Geokscott. I found his design perfect for replacing some of my 28BYJ-48 stepper motor blind automations. I like him had issues with those motors being strong enough for my larger blinds. This is a…
use for 49cc/ 66cc/ 80cc /100cc motorized bike engine kit. Print only one bottom layer and one wall,no top layer and you can fill it with Epoxy & metal fiber & carbon fiber & ceramic (Insulation Materials）. I use JB weld & carbon fiber…
This design is an add on to motorize a RWD stereotaxic manual instrument and drive it with a servomotor. I designed it to allow slow and regular probe insertions. It adapts to the stereotaxic arm, holds with two screws and can be easily…
This fully printable linear actuator is made to fit into any project! You could attach it to cardboard, foam, or any kind of installation you can think of! Designed to be fully 3D Printable (Minus the very affordable and available TT USB…
from the May monthly project, this sorts your m3 screws for you. Designed by DSK001 for Printkits.com , based on this model https://makerworld.com/en/models/747968-mechanical-m3-bolt-screw-sorting-device#profileId-681246
This is an adapter for using the PW80 carburetor on a motorized bike. It is a simple cylinder with an outer diameter of 29 mm, an inner diameter of 18 mm, and a length of 15 mm, and is chamfered to make it easier to insert.
I designed a motorized gondola ropeway system that is compatible with the Skyliner models available at Walt Disney World resort gift shops. All required stl files, zipped audio files, and zipped vinyl cut files are included here. Parts…
I've designed this turntable to fit on a standard 3/8" tripod mount. Used it on the Edelkrone Head One to shoot fotos for photogrammetry. Check out my YouTube Documentation about the process. Print instructions Category: Camera Print…
25cm high bust of T1000 from Terminator 2 to be printed in parts. This design has these STLs: -Bust -Glasses -Base Thanks for stopping by :) Link to Patreon :) patreon.com/Artoys3dPrint Busto de T1000 de Terminator 2 de 25cm de alto a…
I bought motors to motorize my Bali Roller Shades. The kit with remote control is available on Amazon .com. They make it easy to remote control roller shades. The only problem was that the motor mount and drive sprocket were for a 38 mm…
Uses V-Slot Rollers as the kart wheels, with chain and sprocket to drive the conveyor belt using a TT motor. Sprocket from https://www.printables.com/model/283151-roller-chain-and-sprockets, needs 70 chain links and 12&20T Sprockets.…
My granddaughters love the escalator and wanted a pink and purple version. With the first build, the stairs were slightly angled. Not sure why, that didn't make sense from the design, but when I slightly angled the non-drive side…
If you are like me and absolutely despise the exposed barrel on the end of the new XShot AEB, then this model is for you! I designed this barrel shroud to match the general aesthetic of the blaster, as well as add some extra rail space on…
This cover gives your Piston Pumps barrel a clean look while allowing the sleek, orange, metal barrel shine through with the cut outs on the barrel. This shroud fits snug onto the Piston Pump barrel while also aligning with the collet and…
This is a barrel shroud for the XShot Pro Motorized Piston Pump. It adds a top Picatinny rail, M-LOK slots on the sides and bottom, and points for a ball detent sling point (untested). For a 0.4mm nozzle w/ 0.2mm layer height: - 5 walls,…
Drops in, no extra hardware or work required. Print 100% infill with supports as labeled
This barrel shroud was made to be paired along with my barrel cover to create a more smooth, menacing, tactical appearance. I would recommend using some electrical/regular tape for a tight fit by wrapping it underneath the collet.
This is a cover for the original roller SCAR that comes with the MPP. It just friction fits onto the SCAR with ~0.1mm of tolerance, so it should be fine for any BL or similar printers with nice tolerances. I printed this on a Sovol SV08…
