Liczymy pasujące modele…
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
With this design I have combined my tiny benchmark (link below) with a little temperature tower, which is just big enough to give me all the test results that I need to chose the printing temperature for a particular material. Features…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Test the max flow rate of your K1 / K1C / K1 Max hotend using the pre-sliced GCode. !!! IMPORTANT !!! Uncomment lines 41, 52, 451, and 458 (the ones following the comment (; *** Uncomment next line ***) using an editor like Notepad++. The…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Ghosting, loose axes, poor layer adhesion, and cooling problems can all be easily identified and remedied using a quick Rockey print! By changing the resolution, scale, and speed of this print, you can fine tune your printer to reduce the…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Use this to find out the maximum flow rate of your hotend to print faster. The test was created with the help of this website: https://hotend-flow-tester.netlify.app Thanks also to @CNCKitchen Here you will find further information and…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This all-in-one 3D printer calibration test is designed to evaluate and improve your FDM printer performance quickly and accurately. The model includes advanced tests for bridging, overhangs, dimensional accuracy, tolerances, bed…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
Righthanded M20 threadings. To use them as actual threadings, you should print the M20x0.5 with a 0.1 layer height.
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
This is a remix of CNC-Kitchens " Hotend Benchmark Test G-Codes ", made with his on GitHub published tool . For 210x210 baseplate, like i3 Mega S/Pro His video:
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
I made this small collection of cubes with some features to visualize the impact of layer height on the print quality.
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
This is my Print in Place Engine Benchmark! Its designed to test your 3D-printer! Check out the video on how it works, and how it was designed. Update!! - V8 available here! Update! - Easy to print 1-cyl version available here. Update!…
So I love how many of us love the original benchy. The only thing I've always found a little pity it can't swim. Since I have drawn a few ships so far, I just wanted to try to draw a small, floating benchmark boat. Of course, it's not…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This robot is not only a fun print-in-place figure but it…
OpenVessel 2.0 is a redesigned benchmark model for testing your 3D printer’s capabilities. The original was scrapped to make this version unique and functional without resembling Benchy. It’s simple, effective, and even floats upright in…
This is the 3D-Model notebookcheck uses to test and review FDM(FFF) 3D Printers. With a base of only 66 mm x 66 mm, it can be used to find multiple quality issues. Integrated are tests for the build plate adhesion, extruder accuracy,…
Note from comments: The speedboat challenge is done with the original benchy. The text is meant to be at the bottom and is part of the challenge. Any runs posted without the bottom text or other changes to the model are disqualified. The…
Some sample G-Codes to benchmark the extrusion system of selected printers. Find the full tool and a sample evaluation here: https://github.com/CNCKitchen/ExtrusionSystemBenchmark
A benchmark that has extreme overhangs, bridges, fine details and more! No Supports and prints in less than 1 hour! Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Źródło oznaczyło ten model jako treść 18+.
Got a new print cooling fan, new filament or just curious about your printers overhang performance? This thing is the perfect benchmark to test just that. The part comes in multiple varieties depending on your needs and how thorough you…
For me a benchmark is essentially for tuning my parameters, first of all my printing temperature. I can't have a benchmark that takes several hours to print, as I want to try different temperatures on all the different materials that I…
A benchmark that has dozens of overhangs, bridges, fine details and more! Prints FAST & No Supports Required!!! NO SUPPORTS! Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
The Flinty Benchmark is 37.8mm tall, contains bridge infill, unique overhangs, bed adhesion & more . Yabba dabba do it! Added a rotated version to check cooling on the other axis. Easy to print, hard to print perfectly. If Benchy is level…
Small benchmark filament card to test your printer and filament: spinnable coin shape thin (and flexible) wall structures clippable tensile rod measurement shapes small bridging test injection molding ribs chessboard pattern staircase…
This 3D printing benchmark cube is designed to help makers analyze, adjust, and optimize multiple printing parameters based on their own printer, filament, and slicer settings . The cube combines several test features in a single model,…
Stylized haunted pirate version of a classic benchmark boat design, featuring ghost sails, skull accents, and flowing sp
Welcome to The House Of Benchmark. I created this calibration cube style print to help calibrate and test my 3d printers. It's a quick print at 100% scale and should measure 20mm on the X and Y axis. Challenges of this print: Bed adhesion…
The purpose of this model is to have a standardized Gridfinity Box that could be used for benchmarking 3D Printers.
I wanted a benchmark for testing different filaments. However, I wanted something I would appreciate a collection of. I don't care to have a fleet of Benchys or an army of Martians. These cute and nostalgic poltry are right up my ally.…
This Cube Might Help You Fix Your Printer Or Help You Do Some Settings (1g of filament and 10 mins on a Ender 3V3SE) 1cm x 1cm x 1cm
Overhangs are particularly problematic for rounded surfaces and edges. This benchmark aims to uncover such problems. And since a benchmark is useless if it always delivers nice and shiny results, I have made this benchmark so tough that I…
Please give it a ❤️ if you like it 🥰 I designed this model to compare the adhesion of different 3d printer beds. Video FR about it: Please give it a ❤️ if you like it 🥰
Why not try a test model that you can actually put to use? This hypercube ornament not only looks cool, but also tests your printer's abilities in several facets. If you succeed, you can use it as an ornament or centerpiece. Consider it a…
Basic benchy with additional tools to be used as: -Filament clip -Nextruder/ Nozzle wrench -USB-Holder -Scraper -Rudimentary Filament cleaner …so after benchmarking or print diagnostics, the part actually can have another purpose and is…
A small testing part originally made by CITADEL . Very usefull for testing for testing paints, washes and new techniques. RECREATED by me, code name PERMATEUM. I definitely suggest printing it at high resolution, but if you want to save…
If a “Benchy” could float … “Marky” could sink it . 😏 I now present “Marky”, the benchmark biplane bomber! It's cute, it's quick, it's useful, it's repeatable, it's comparable, it's measurable; and it will always WOW a toddler and…
I wanted to try something new for the Tables contest and decided to make this model of a chair, you can use to tune in retractions/temps/cooling for your filament in order to get perfect bridging without any stringing. If you want to…
Hypercube: 14.2x14.2x14.2mm. Rate bridging and slopes visually.
a 3d printer benchmark testing many things like overchangs and quality of the printer that prints in 4 hours
This picture stand is a functional test print. You can use it to test your retractions, overhangs, and cooling. Once your printer is dialed in you'll get an awesome picture stand to hold photos of your favorite cycling trip, loved ones,…
For some reason my printer is producing some artifacts (lines between perimeter). I've quickly sketched out this model to reproduce the issue I have and check how different tweaks improve the results. CAD file available for customization.…
This design has been replaced by the new version: The FilaBench https://www.prusaprinters.org/prints/42585-filabench Revision 2 of this design adds more length to legs of the bridges reducing failure due to adhesion issues. A Revision 3…
A quick test print, good for filament tests or print setting test or whatever. Deliberately small and simple. Enjoy :)
I decided I wanted a smaller pc case, but didn't want to pay $400+ to convert my pc to sfx. So Instead I spent 20$ on a new roll of filament, 5$ on 3 feet of ¼ inch all thread, and maybe 3$ on some harware for the all thread. Everything…
“The Benchmark” This is a bookmark based on the Peeking Cat Bookmark (3D) by Schrittmotor and using a Benchy. The Benchy was reduced to 75% of actual size to not be too large for your books. In the world of 3D printing, A boat like no…
This is a remix of CNC Kitchen's “Hotend Benchmark Test G-Codes”, made with the Excel sheet he published on GitHub. Works with printers with a build plate 25x25cm, like the Anycubic Vyper. The calibration will fill the bed from the front…
This is a very tough benchmark part, to test the part cooling capabilities of your printer for PLA prints. It is intentionally made to drive a normal FDM printer beyond its limits. I strongly believe in benchmarks that overstretch it a…
this in a benchmark/fidget print for any printer
Test your 3D printer's performance in one single print with the AWT Works Benchmark v1.0. This compact test plate covers the most common printer calibration tests in a single print at a constant speed of your choice. Do not use adaptive…
This little benchmark print helps you to figure out how well sharp corners stick to your printbed. Both the inside and outside corner are filleted with a different radii. The size of each radius can be seen on the adjacent face. Overall,…
3DBeaver is a 3D model Navy tug bb19 “the boomin beaver” specifically designed for testing and benchmarking 3D printers. It is a small replica navy tug with bridges, stringing test, intricate details and overhangs ranging from 22.5…
I recently got new filament for my prusa printer and was having trouble with default profiles. XYZ cube doesn't feature any meaningful tests, and benchy is taking too long to print. I needed something simpler that would let me see if…
A quick and easy Thread Benchmark. 3 Different Threads: 1/4"-20 Standart Tripod Thread M32x1 M12x1 If the threads function as they should, then your Printer is well calibrated. If not, Check your E-Steps, Flow, Z-Calibration etc. Print…
This calibration cube has got some features. -dimensions -sharp corners -small holes -small gaps -radius -etc.
Benchmark model should be placed as it is and it should printed in vase mode or with high percentage of infill for higher difficulty. The base circle has diameter 20mm and it expands to 50mm. Model is 180mm tall with 10mm safety borders…
Wrap around grips for an Automag Benchmark 45 frame. I started this project because I was getting a hot spot on the inside web of my thumb because of a fairly sharp corner on the Benchmark frame. I added "wings" to the back side of the…
Quick and small Benchmark to check bed leveling, layer adhesion round and sharp corners, and more...
🐻 Park Benchy | Benchmark 🐻 Park Benchy is a benchmark that evaluates your printer’s performance in key areas while using minimal filament. Designed to print in just 40 minutes and requiring only 11g of filament, it’s a fast,…
The 3DBenchy split into six separate bodies, one per color, for toolchangers that can keep six materials loaded at once. Full six-color version: INDX with the 8-tool kit on a CORE One or CORE One+. Each color sits on its own nozzle, so…
This is a "bengine" with a ring for your keychain. so you can have it where ever you go (Unless you forget your keys of course). No parts have been modified. I just attached a half torus to the side. Update! Now modified in fusion 360!…
this is a unimog benchmark, its a model i made for a class/for fun. there are 3 different models 1.with moving wheels 2.with moving wheel and bed 3.nothing moves enjoy!
A roughly 35 minute test print to check printer or filaments settings before running a long print-in-place, articulated, or flexy model. Just bought a new roll of filament, don't waste filament, run this print test first! Model is about 8…
When I build prototypes using FDM, I sometimes experience delamination and breakage of my 3D-printed parts. It is not always possible to rotate the part to optimize strength, which can lead to adhesion and delamination issues. I have…
A simple object to test my printer by printing threads in sizes M3, M4, M5, M6, and M8. For objects with threads i use 0.4 nozzle with 0.1 layer height. Should print every material, but i like for stability of my objects PETG.
Low detail benchmark to print every time you get an upgrade for your 3d printer, or every time you get a new filament, or a new 3d printer, and its fun to have.
benchmark your printer
Ive always struggled with tuning my ironing flow. when i do a ironing test print, it looks perfect, but when i print out something else, my ironing looks rubish. this design replicates almost all situations where ironing would expect to…
While working on the latest update to Skeletor, a Creality K1/K1 Max/K1C cooling system I found myself needing a model to quickly test cooling and overhang performance. As cooling continues to get better, the test models must continue to…
Nice and useful benchmark test for screw threads. The 3 cylinders have different inner tolerances as written on the outside. The screws are availeble with 0.0mm and 0.1mm tolerance to test which tolerances work best on your printer when…
📸 Show it off: Tried your own wild color combo? Post your print in the comments—I’d love to see how your version turned out! 🔒 Personal Use Only This model is free for personal use only and may not be sold, shared, or remixed in any form.…
This test is designed to evaluate your printer’s ability to achieve precise tolerances when printing two interlocking parts. There are two test files: one includes smaller tolerances of 0.03 mm, 0.04 mm, 0.06 mm, and 0.07 mm, while the…
/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////
impossible benchmark for 3d printers
This is a benchmark, its similar to the 3D Benchy, but its a rocket ship because boats are for the weak. (Update) Thank you all for the downloads! Please post your makes and post comments for questions or things you think should be…
Bench-Car – Print-in-Place 3D Printer Benchmark A small car with a practical job: compare surface finish, fine detail, circular openings, clearances and dimensional accuracy, then free the wheels and let it roll. Bench-Car combines…
a random benchmark vase for 3d printing in fdm
3D printer benchmark to test quality of your 3D printer.
A simple math sculpture using a box primitive but somehow it looks cool, so I thought I would share. It could be used as an effective benchmark - for angles (all angles are 45 degrees) and for size since it gets 20% smaller with each…
Limo buggy, based on E3D's buggy benchmark, designed to test your printer's bridging ability over a very long distance. A little over 100 mm! Take your printer settings to the limit with this challenge! If you succeed, you can brag about…
20mm Benchmark cube for multi material printer. Print instructions Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: 3D Printing Tests
Poor audiophiles like myself can barely afford a single Benchmark DAC. How could we possibly rack-mount it safely? If you have the metal joining plate this is everything else you need to fill the half-rack gap. I have a few unpublished…
Not really a benchmark, but I use it to test my printer adjustments and new filaments
This calling card - if you edit it to your name in slicer - gives you an idea about the accuracy of the print and also about how translucent a particular filament is. I used PETG in various colour combinations. The orange Prusament from…
This project provides a comprehensive, standardized collection of mechanical testing specimens designed to benchmark and analyze the real-world material properties of your 3D printing filaments. Whether you are testing the tensile…
made with tinkercad do not think bad about this model!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
From time to time I try out how good are the results with usual ai-prompts in the freeplan. This time it corresponds with the needs at work, that I should test the ability of the LLMs. Next to a well-known task to create a…
Slicers have many limitations especially with usage of multiple threads and GPU. Here's a difficult enough object to measure slicing time. Never intended to actually be printed, thus no real photo. For repeatability best to send as whole…
Yea plz support me
test quality of curves, overhanges, stinging, and bridging plus sharp corners
its a set of tests and benchmarks for your 3d printer
Print on bottom face so its vertical, no support should be needed if printed this way. its a little loose so not perfect but it works good enough.
A useful test for comparing quality of layer thicknesses or other features in a small architectural totem.
I managed to convert the files via SolidEdge. Below are the PAR and STL files. Enjoy. Category: Other
Since I print a lot of resin stuff I'm always waiting for UVTools to analyse my files to fix unsupported or weak supported parts of my models and more importantly check for resin traps. So to help people decide whether or not a CPU…
Is your 3D printer working how it's supposed to?
This is a calibration print for cement, clay, geopolymer, earth or similar materials provided to accelerate the development of printable cementitious materials. This shape was designed to print with a single wall in "spiral" or "vase"…
At first, I printed 20+ of these for my XC team as an end of season gift, but now that everyone wants a better Benchy, I think that this good old model will do the trick (I have wanted to publish this a long time ago.) It's pretty simple.…
used to mount the Benchmark Twistor onto a wall
![[OEWB] Workbenchy Utility Benchmark](https://media.printables.com/media/prints/1214504/images/9115253_448793a8-2503-4960-a2ee-2dc8ad51e3f7_28f72394-2a37-4e03-a3ec-7fcaa0fd8a8e/f86598ee-5736-450b-a54f-847fb926b8b2.png)
![Sphericon [BENCHMARK for my printer and skills]](https://media.printables.com/media/prints/216121/images/1973107_cf1d72cd-f4c8-4249-a352-7e2c7b533610/2022-05-29-14_45_21-sphericon-hexagon-based-spher.jpg)
