Liczymy pasujące modele…
The Chromatic Countdown Apparatus (a.k.a. Learning Tower) I designed to help teach my kids polygons and color theory that can also be a fun learning game. The tower employs polygons from a Digon(2-sided) to a Nonagon (9-sided). Each…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Hier handelt es sich um ein Frontdreieck zu Ankuppeln weiterer Geräte an einen Claas Xerion 5000 von Siku.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Count down the days to Christmas with a little bit of mischief. This Christmas countdown calendar features a stylized Grinch bust in bright green, wearing a classic red Santa hat with a white trim and pom-pom. Below the smug, yellow-eyed…
My family loves counting down the days until Christmas! 🎄 Here is a festive Grinch themed Christmas countdown with swappable numbered ornaments! The ornaments are double sided and easily interchangeable! I used ironing on all top surfaces…
Part of my kid's Christmas present is a trip to Disney World, so naturally they are counting down the days until Disney! This was printed in PETG at 0.28 layer height. The tolerance on the wheels is a bit tight so you may need to adjust…
You can use this model as a counter or countdown. It has a hole in the back to set the numbers correctly, e.g. if you want to start a countdown from 50. I printed all parts except the spring with a layer height of 0.2mm and a filling of…
I used ABS but PLA should be good too. You have to glue both parts together. Update 21.03.2024 Updated the Part to V3 to be stronger (bigger pins, custom cut on the pins) and added custom supports. 2 Walls 0.2mm layer height
Simple Countdown Advent Calendar - No MultiMaterial Printer needed, just switch the filament at 25mm height for the numbers.
Modern Countdown Days to Christmas | Santa Sleigh with Reindeer Support and Licensing: If you would like to help support more free models or get permission to sell physical copies of my models, consider joining My Clubs Membership .…
Numbers from 1 to 24. You can use it for an advent calendar or a christmas countdown. I printed it with pla and a 0.2mm nozzle :) And don't forget: Jesus is the reason for the season ♥
Looking at Elproducts' remix of 4frika's Babbo Natale I realized that neither was exactly what I wanted. So I started from scratch with a fresh sketch of a cartoon Santa, designed in Adobe Illustrator and extruded in Tinkercad. That…
Printing without supports works, but some of the numbers will get a bit droopy. Nothing you can't clean up with snips. This is a countdown die, so it is not well suited for fair rolling, but for keeping track of things. Category: Dice
Freestanding, heart desk ornament that when viewed from above spells "MOM" Added a stand to rm3dprintdesigns design
Numbers from 1 to 24. You can use it for an advent calendar or a christmas countdown. I printed it with pla and a 0.2mm nozzle :) And don't forget: Jesus is the reason for the season ♥
Taschenlampenhalterung Rundhalterunf für Gopro Mount. Ich habe die STL in verschiedenen Durchmessern erstellt. Sie benotigen noch eine Mutter M5 und eine Passende Schraube oder eine Gopromountschraube Flashlight holder Rundhalterunf for…
Large tray that fits in your PrintDry machine to quickly dry/recharge desiccant by allowing it to be distributed in a thin layer with lots of ventilation. It Really Works! Want a PrintDry filament Dryer? https://amzn.to/3TMjGsW (affiliate…
Happy Holidays! This is my homemade countdown to Christmas fully 3D printed! You can begin the countdown anytime from Thanksgiving. To use it, simply adjust the cube as the tens place and the decagon as the ones place to make the amount…
This is a project I worked on for the #studentdesignchallenge. I used Fusion 360 to create this model. The purpose of this is to declutter the space of anyone from students to adults used to make their space more efficient and have fewer…
The PrintDry PRO filament dryer includes a couple of rubber adapters for different size spool center holes. However they will not fit spools with large center holes. This adapter will fit most spools with center holes up to about 80mm…
This is a remix that eliminates the need for supports.
I just got the PrintDry 2.0 and didn't like all the open holes letting extra heat into my print area. Decided to make these up to plug the holes. Printed in Ninjaflex but I imagine any flexible filament would work…probably any regular…
Plug the holes in the PrintDry system to keep warm air from escaping from spots you don't want. There are several other PrintDry plugs available here which are pretty much two cylinders. While they work, I had a couple issues with them,…
I took the idea from the christmas cube countdown and modeled a scene for halloween. I am not a great modeler, but I had fun with this one so I wanted to share what I had.
Siku Adapter für standard Anbaugeräte am Frontdreieck zusätzlich wird einm kleiner Nagel benötigt (durchmesser 2mm) der in das Loch geklebt wird und auf die passende länge abgezwickt, mit gedruckter anhängung hatte ich bisher schlechte…
I like Kyle's plugs for the feeding holes in the PrintDry 2.0 Pro dryer. I was trying to find the best way to print TPU directly from the dry box and ended up with running a PTFE tube to my Mk3S. I found a couple of adaptors for PC4…
Remix of gdrag's model using the original Fusion360 file and adding a base for it to sit on. Base is same diameter as the circular pad of the container. Should do better than using a few packs of silica gel. Spools slide over. Fits Bambu…
Christmas countdown calendar. Wall mount. The top corners have a small hole where you can add string through and add a knot to hang it from a wall.
The models contain additional holidays to be used in the Disney countdown. A holder is also included for storage. Thse holidays are: 4th of July Labor Day New Year Memorial Day Anniversary Celebration Halloween Teddy Bear Easter St.…
PrintDry only gives you a few plugs for the PRO3 model. Print these to fill the remaining holes. Models for both sealed and PTFE access holes. Examples printed in 3DXTech 3DX-STAT TPU but any flexible will work.
Count down the days until Christmas with this rotatable ornament! No AMS, multi-material, or support material needed, only a few layer-based filament swaps and a little post-print superglue. Print Files and Settings Two sets of files are…
This is a friend's remix of my previous effort. Countdown d20's are fine for games like Magic, but...what about D&D? Anathema! Changing the countdown faces were in a design backlog - redoing all of the faces was tedious, brute force work.…
My son enjoyed counting down the days (we use ‘number of sleeps’ for simplicity) until Christmas using a store-bought countdown shaped like a snowman. So I figured a non-holiday themed one would be nice for other events throughout the…
I like my PrintDry Pro filament dryer, but the spool adapters that came with it didn't fit Sunlu filament spools, which have an inner diameter of about 70 to 72 mm. UPDATE 2/16/2022: I was asked if I could create an adapter for 50mm ID…
Remix of PrintDry Bowden Adapter by clintfisher Found that the Bowden tube would sometimes get pushed out of the adapter when feeding filament through. Added M6 threads to screw in a PC4-M6 Pneumatic Fitting. Also made the part of the…
Food dehydrator mod for drying filament. Print 3 parts and glue them together. No need to cut/destroy the original trays, so you can still use it as food dehydrator. The diameter of the dehydrator is 235mm. Rolls up to 100mm width will…
Original is for drying desiccant packs by themselves, this one is for loose desiccant (but could be used with packs by adjusting print settings) and works with the center spool support still installed, so you can have a spool on one side…
Countdown all your favorite holidays with these numbered blocks! The blocks contain every digit (0-9) as well as duplicates of 0, 1, and 2 for countdowns up to a month in advance (the 6 also doubles as the 9). This is a set of countdown…
I found this image online and wanted to make a countdown board with magnetic ornaments to countdown to christmas for my daughter. I had 6mm x 3mm magnets that worked well to use to stick the board to the fridge it uses 4 magnets on the…
Base, stand, and countdown blocks! The stand can be spray painted with chalkboard paint to customize. Numbers can be painted or left alone. No supports needed! 10% infill works for all pieces. One block goes 0-4 and other goes 5-9, so…
Read First! The base prints just fine in my opinion and can be printed a few ways. I like to print it standing up with supports the best, but there still will be slight stringing where the supports are. This spot is not easily noticeable…
Project Dynamite-Time: The Most Explosive Countdown Clock 🕰💣 Welcome to Project Dynamite-Time, where punctuality gets a bang! 🌟 Imagine a countdown clock that not only tells you how much time is left but does it with style… the style of a…
Stand Choose EN or CZ version of stand. Or let me know if you want to add another language. If you want to change color do it on layer 27 and back on layer 34. Number cubes Print both number cubes - there are different numbers on each! I…
Anticipating holidays is half the fun, so why should Christmas get the only calendar countdown! Look no further because with this desk/mantle decoration you get to countdown the days until the spookiest holiday of the year :) With 31…
I was looking for a cute way to keep the kids excited and able to keep track of how many days until our next Disney vacation. I found a countdown but it had a few things I wanted to change on it and thought you may enjoy my rendition as…
I AM NOT affiliated with Nintendo in anyway and am not interested in infringing on their copyright. Nintendo lawyers: you are a bunch of bastards that destroy fan cultures. STOP IT! Design by my little brother (nicknamed SusGoing). Holds…
The original countdown die by kittka is awesome - I initially shrunk it down and remixed it for different magnets (not shared, as I used an ugly mix of magnets I had on hand). A friend's puppy chewed on that, so I was a little more…
My PrintDry system came with metal fittings that were a straight-thru hole of about 6.8-6.9mm. Not sure what is supposed to be used with these as a standard 4mm PTFE tube passes right through. I designed these parts to replace those…
The stock ones came with some rubber graument (HORRIBLE) and metal rollers (EVEN WORST QUALITY) get hot and melts the spool holder. V2 with ballbearing coming soon that can print directly from the printdry box with any snagging. Hva
This model is provided by PrintDry. It is a plug for a PrintDry Pro that has a channel for a PTFE tube to pass through the port.
Do you also think the normal clips for the PrintDry containers suck? Well this is the model for you! Not only does this new clip design solve the problem with the original design it is also * almost* Print-In-Place! The BEST part is the…
NEW AND IMPROVED! v2 available at: https://www.printables.com/model/303357-christmas-countdown-cubes-v2 Easier printing and assembly, better connections, Grinchier font! Looking at Elproducts' remix of 4frika's Babbo Natale I realized…
Ein vollständiges Insert für Mischwald mit allen aktuellen Erweiterungen Alpin, Waldrand und Entdeckungen. Die Kartenschächte sind für Karten in Hüllen (59 * 91) optimiert. In die schrägen einschübe kommen jeweils die Standart bzw. die…
Unscrew and replace the existing filament guide with this one. Much easier to insert and remove the PTFE tube. Attach the PTFE connector first, then screw the printed pieces together. Make sure the PTFE connector is on the outside of the…
I wanted a way to dry out and recharge a large number of desiccant packets, so I designed these racks for my PrintDry Pro. Two racks can be placed per level so the standard dryer can use up to four of these racks. The PrintDry manual says…
I wanted to add a single layer to my PrintDry Pro drier. The layer has holes in them to thread in 1/8 NPT fittings for flament to exit or plugs to fill unused holes. I printed it fast with a big layer height. Printed PETG, .45 layer…
Set slicer; Loops to 0, and Elephant foot compensation to 0 (why this is a Default is beyond me!) and fist layer height to .2mm. Import PrintDry-ClipV2.step into prusa slicer. Right click on PrintDry-ClipV2 and “Split to Ojects”, Slice…
Una pieza para conectar los modulos de los hormigueros de AntDimension y AntMaster entre si. Y una pieza de bloqueo para asegurar la parte de AntMaster. La de AntDimension se fija mediante dos tornillos M3x10. Recomiendo imprimir girando…
I wanted a way to see humidity for my spools that I store in the PrintDry VS206 airtight containers (https://www.printdry.com/product/vacuum-sealed-filament-container). This print is shaped to match the side wall contour and to notch on…
Build an IOT countdown clock using Adafruit QT Py ESP32 S2, alphanumeric STEMMA QT displays and Circuit Python! 3D print a stand and display a scrolling countdown to your special event! YouTube Video Learn Guide…
Un soporte de tubos Reinas "Bambu" con conexion con los modulos de Antdimension Usa imanes de neodimio (mejor N52) redondos de 6x3mm. Fijalos con pegamento cianocrilato Mira otros modelos de la coleccion Tubos reinas "Bambu":…
Englisch: With this filament feedthrough, up to 4 PTFE tubes can be guided simultaneously through a material thickness of 1 mm to 45 mm. The implementation can be airtight. The PTFE hoses should have a diameter of 4mm. Instructions: 1.…
My PrintDry Pro came with clips that go on the mounting rod on both sides to keep the spool in place. I wanted to purchase additional clips. Unfortunately PrintDry does not sell them as a separate item. So instead they sent me the stl…
Insert for quick setup and teardown of this fun and hectic game. Supports sleeved cards and the spacers should allow for horizontal and vertical storage. Here is a short video on how it all fits in the box.…
Here some more Runway CountDdown runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters…
This is a tray that adds custom tilt holes to the fantastic printable Ergodox case, PrintDox . It snaps around the PrintDox. It's designed to use M6 screws and nuts. Here's a link to my magnetic feet if you want to get real fancy with it.…
I wanted to plug up the holes on my original print dry, so that the air just flows up through the top. I printed this with TPU and it works great! Snug fit, but still removable by hand as needed. Tapered tip makes it easier to insert.…
Edit Jan 9, 2026: After 2 years service, the PETG model was quite warped. I reprinted with PC-CF. Edit Sept 16, 2024: Added Unified model for large format printers. This is a sturdy shelf for the PrintDry Filament Dryer PRO3 intended to…
Harbor Freight brass brush holder for 3DPrintDemon's purge tray on the SV08.
You usually put two 1kg spool inside PrintDry Pro. I don't, I put four 1kg spool and dry them together. The black rubber prevents you from doing it, yet without the black rubber, your spool is too low and overheat from the hot air. So…
This is a remix of the 350mm center section of 3DPrintDemon's awesome Canopy Top Hat Remix sized for a 250mm Voron 2.4. Print them in ASA or ABS lying flat on the build plate using Voron structural part settings with snug supports for the…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4K90oEFy4Im Made with Gimp and Inkscape. Category: Earrings
Here we have the 3D printable Christmas Countdown, complete with little Snowman day marker. For added effect do a simple colour change as the words and numbers are printed so they stand out, same goes for that little snowman :). It's not…
This tent is designed for the PrintDox Ergodox case This will slide onto the inside edges of the case and hold an ergodox at about 7.5° and has holes for some rubber feet (similar to these). I've included the file for 10° and the FreeCad…
Basurero para hormigas diseñado para los forrajeos MK2 de AntDimension. Pensado para colocarlo en una esquina salvando la pieza TJoin. Es ligeramente más pequeño que el basurero oficial que la tienda ha sacado, por lo que se puede usar en…
I designed a small plug to fill the unused Print Dry Dryer ports. Printed in PETG .15mm layer height.
This is my rendition of the countdown to x-mas clock from “The Nightmare Before Christmas”! One side is the X-Mas countdown, and the other side is a Halloween countdown!! 2 in 1!!! I tried to find this exact thing to buy and turns out it…
A printed drawing that creates the image of a woman's head with crown and jewellery like sketched by Picasso. This is meant for 2 color printing, you change the filament at a certain height. The base has 0,5 mm and then the drawing…
The TPU/rubber wheels that come with the dryer and are supposed to fit into the filament spools wear out after some time and fall off, potentially wreaking havoc on a print. I got tired of it and designed this. Simply put the existing…
Created this for a printdry i bought used. It came with just a printed holder, made to be fitted in the other direction, to allow bigger spools. You will need some sort of rods to put through the drums. I used 8mm rods 13cm long. You need…
I have a love/hate relationship with my PrintDry Pro. It has an additional chamber for two more spools for a total of four (4) spools. It works great for distribution with fast and easy filament changes which is what I love about it, not…
Since it's designed for Taiwanese user only, I'll describe it in Chinese. 簡單的設計，可容納50個壹圓、50個伍圓、40個拾圓*兩道、30個伍拾圓，傾角30度 Print instructions If you need the number-marks on it, please use 0.25mm nozzle to print. Otherwise, it'll look like a…
I liked @veggysaurus's model (https://www.thingiverse.com/thing:4723307) but I didn't have a need for two guides and didn't want to have the connecting rod. So I remixed the design to use a M3-16 screw and M3 hex nut to hold the 608…
Update V2 - 20240425 - Update to use also for Honeycomb Storage Wall ---------------------------------------------------------------------------------------- Bauteile / Parts: 1x Querträger_Crossbeam 2x Rolle_Roller 4x Kugellager/Bearings…
Maximum of 99, no supports needed event countdown with two hexagon wheels that also move closer together as the count reduces. .stl & .3mf files available. Assembly: see exploded diagram for how parts fit together. Glue is required to…
A while back I had an idea to make an actual paintress who rises up and "paints" a new number on her monolith. I was finally able to put it together. It uses a servo and a stepper motor to turn/lift the paintress. And a small OLED screen…
Es gibt keine Besonderheiten zu beachten beim Drucken dieses Werkzeuges. Es soll eine Möglichkeit bieten auch Sechskantschrauben mit 13mm Durchmesser zu in engen Stellen zu lösen. Als Bspl. jedes handelsübliche Waschbecken hat genau…
Ich habe mir diese Müslidosen ( https://amzn.to/3QVKmGP ) für das Filament zugelegt. Als Abroller benutze ich das Design von Laserdroid https://www.thingiverse.com/thing:4647238 . Um das Filament aus der Dose herauszuführen, habe ich mir…
This is a remix of my previous PrintDry spoolholder. This version will sit without wobbling as it includes a base. I have also rotated the exit guide so it won't bind on narrow spools such as Filamentum. Here's a link to the original…
Before a specific date, to know the number of days remaining
Count down the days with this GTA 6 (VI) countdown stand . After release you can remove the top part and convert it into a display stand ! Or use it as a regular display stand without the countdown. The numbers can be stored on the…
I wanted to make an door at the (long) side of my original prusa enclosure. Therefore I needed a drawing of the original frontdoor, to modify it. Unfortunateley this is not available. So I measured the original sheet, and redrew it. This…
Holds a standard round hygrometer in the newer style PrintDry single spool container. Inspired by the original, but that doesn't fit the container that came with the latest PrintDry Pro system. Remodeled from scratch to need less in the…
Mit den Beach Buddies macht Sandspielen doppelt Spaß! Ob Seestern, Muschel oder Fisch – diese kinderfreundlichen Förmchen bringen kreativen Sommer-Spaß an Strand, Sandkasten oder Garten. Einfach ausdrucken, loslegen und spielerisch…
A pegboard holder for the PrintDry filament storage container's vacuum pump Category: Tool Holders & Boxes
A very niche model used to tidy up my filament storage. I use PrintDry™ Filament Container 6 Per Box (pictured on the left) to store my filament, and Vesken Shelves to keep them organized. The containers don't quite touch the bottom of…
First of all, I would like to thank JessL3D for being kind enough to let me use a custom wreath in my design. JessL3D has lots of great models and you should check them out. LINK to JessL3D → https://www.printables.com/@JessL3D_192953…
If you own a [PrintDry Pro] ( https://www.matterhackers.com/store/l/printdry-pro-filament-drying-system/sk/MSMLZFKZ ) you probably discovered the included spool holders don't accommodate prusament spools (the smallest holder is too…
A device to count down the days until childbirth.
