Liczymy pasujące modele…
The BMW R1200 GS K25 miss 2 covers on the frame on the right side. Decided to design and print 2 covers to fit there. I print them in PETG 0.2mm. If you print it share here the result in the make section. Enjoy.
Broke the right handguard bracket of my 2007 BMW R1200GS Didn't want to pay more shipping than the piece costs, so designed one myself. I've printed it horizontally where the single hole is situated. Printing it slow and warm. This…
I required a tool to help flush the brake-fluid in my 2005 BMW R1200GS, without introducing air into the servo-assisted circuits. And I did not want to spend lots of money and time waiting for it to arrive. As far as I know, this funnel…
Oil Filter Wrench Removal Tool for Hiflo HF164/HF165/HF184 & BMW R1200 GS/Adventure - Chiave a tazza per filtro HIFLO HF 164 Bmw Gs R1200gs/Adventure Suitable for: HIFLO HF164 / HF165 / HF184 oil filter / Mahle OC306 Inner Diameter 76mm…
I needed a tool to loosen and fasten the oil filler cap on my 2005 BMW R1200RT. Since the RT is covered in plastics, the model I treid, made by @JahnRoux did not fit, so I remixed it in a way that it would fit. It probably will fit the…
The plastic cam that locates the throttle cable on some R1200 motorcycles can crack and eventually fall off, this model is a replacement cam option. There are two throttle bodies on the R1200 hence a left and a right hand side cam, they…
You need 1 piece screw 4mm with nut. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 70% Filament: Spectrum ASA 275 black Notes: You need 1 piece screw 4mm with nut. Category: Automotive
While remixing, I was able to rough out a geometric sketch and the JPEG is included with this model. Please note, I did this for a friend at work who owns this bike, so my work is best effort. From what he told me it works well. I have…
Simple low-profile one-piece wall mount for Lego Technic BMW R1200GS Motorbike kit. Needs two short Lego Technic Axles and one Lego Technic Pin (3673), which fix the model to the mount in three locations. No mods required to the model…
Bmw R1200GS - Keychain - Portachiavi - Porte Clès - 钥匙链 -Schlüsselanhänger Update 23/08/2025: added REV1 Versions Update 09/09/2025: added REV2 Versions Update 05/02/2026: added BMW R1200GS Keychain Type C Resize to adjust dimension If…
Hi, this is my first design of a tablet holder on a motorcycle. After several tries with the original crosscall support and having lost the tablet several times in the mud and the road XD I designed my own. Quite easy to print, just put…
This is a bigger headlight dust cap for a BMW R1200GS 2004 model (confirmed but it should fit newer models as well) for LED conversion. Due to a heatsink or a mini-fan usually found on these types of bulbs, the original cap (part number…
The holder is attached like a clamp to the factory reinforcement for mounting navigation on a BMW r1200GS motorcycle or any other tube with a diameter of 16 mm. By screwing in the M8 screw, we clamp the phone in the holder. The screw…
I made a model of the known BMW GS Commercial. You can customize it, make a Keychain , 3D Sticker or Badge. This is why i didn't put a hole for the keyring If you need the Stepfile just let me know.
Download ? Please Like Thx BMW R1200RT The bike is filed in whit epoxy
I bought a BMW R1200GS and a Carpuride 702B Pro Carplay Display. The R1200GS was missing the BMW accessory mount so I could not use that. It also turns out that the Carpuride 702(B) Pro uses the mount for the BMW bracket or alternatively…
FDM Printer settings ABS Filament 245c hotend 80c heatbed 65% to 100% in fill 65mms print speed this is a prototype and will get updated as more testing is done V3 now Available thickened the collar that centers the cultch and and the pin…
A wall mount for the BMW Vario top case Not a perfect model, but seems to fit. Will likely make additional changes if mine falls off the wall at some point. Scanned case using JMStudio and a Seal 3D. Wasn't a great scan, but got the job…
Tele Lever cup for the BMW R1200GS models
Headlight protection for BMW R1200 GS motorcycle (K25). Made in one piece, does not require assembly, does not require removing the headlight for installation. Just print and fasten to the headlight using the latches of the part. I made…
This is a remix design for my BMW R1200RT 12mm bar. Printed with eSun ABS+ You will need : 4 screw M3 x 25mm 2 screw M4 x 40mm 1 screw M4 X 30mm 2 locknuts M4
I have a 13mm rod that I utilize to balance regular motorcycle wheels. The hub mount BMW R1200 rear wheel has a 62mm opening. That's far too large for my basic setup. I made this part to seat into the opening of the hub, with a huge nut…
BMW R1200 GS Cap Kappe 46718556271
This model is not associated to BMW and is meant to be a temporal replacement while the original (if exists) is found. Unfortunately it seems that left control for the motorcycle is sold as a whole, and the turn signal cover cannot be…
Download ? Please Like Thx BMW R1200RT Oil COOLER Gril Just like the BMW Cars (kidney's) Glue the parts and aad some mesh
BMW R1200RT Keychain Download ? Please Like Thx
Lost a damper ring for my 2016 K53 BMW R2100r quick print for temporary replacement. BMW part number: 31 42 7 677 987 NOT FOR LONG TERM USE, REPLACE WITH MANUFACTURER ORIGINAL PARTS ASAP.
Oil Filter Wrench - Removal Tool for Hiflo HF164/165/184 BMW R1200 GS/Adventure Chiave a tazza per filtro HIFLO HF 164 Bmw Gs R1200gs/Adventure Compatibility: Suitable for HIFLO HF164, HF165, HF184, Mahle OC306 and Bosch P7251 oil…
Rear Splash Guard BMW R1200 GS (LC) 2013
BMW R1200GS Adverture Keychain Download ? Please Like Thx
Housing for a additional on-board socket (DIN4165) for a BMW R 1200 GS (LC) 2013. So that you can connect a non CAN-BUS capable charger e.g. fritec Ladeprofi Vario 2.0, to the BMW.
infill 25%+ perimeter 4+ PETG prosim pri kaťdom modele dajte opravit pomocou windows je tam vela detailov ktore su tažko opravitelne. a slicer si snimi lahko poradi. jedna čast sa na svetlo lepí za použitie dvojzložkového lepidla a druha…
Use this plate to easily mount a TomTom in place of a Garmin on your BMW R1200GS or R1250GS. Will likely also work on the BMW S1000XR and other motorcycles with the sat-nav mounted in the same way.
Lock in place w/ two cable ties. Used it for over 12000 km no, haven't lost my phone yet! :) Print w/ PETG and 0.3mm layer height.
The LifeSpan TR1200DT is an older generation treadmill for walking desks. It has two leveling feet at the front, which consist of a metal core and a plastic puck. The original ones seem to be cast, and might have been rubbery, but turned…
Bonjour, je vous propose ce modèle de support d'un bouton des feux longues portées pour une BMW r1200RT. Le support s'insère dans le système de serrage du commodo droit.
when you are changing your x bearings on your axle you have to aligne your bearings this helps little bit before you are fixing the bearings
2005-2013 Oil-cooled BMW R1200RT have a tendency to break a winshield arm due to metal fatigue in aluminum alloy upper windshield arms. This is a replacement one. Manufacturer PN 46637686677 and 46637686678 Inspired by blueprint by…
Imprime tu soporte de botella de liquido de frenos trasero para tu motocicleta BMW R1200GS (no he probado si sirve para la R1150GS) los 4 agujeros están pensados para controlar el nivel del liquido de frenos y el agujero del soporte esta…
Mount with an additional slot for the remote for Future Eyes F150 ( https://www.futureeyesdesign.com/future-eyes-f150-wholesale-wired-backlight-switch-auxiliary-fog-led-motorcycle-lights.html ). It is installed in place of the left…
This 3D model was specially designed for BMW R1200 GS up to 2012 crashbars manufactured by “Armor Bike”. I do not know if this slider will fit any other crashbars. As it turned out, the mounting holes in the side plate of different…
BMW R1200RT Kroonplaat beschermer
I needed a camera that works with my Garmin Zumo XT navigation device on my motorbike All the space on the rear BMW F850 GS is full with extra lights etc. so the only space was under the Vario top box. The screws from the top case are…
Funda Tuerca Espejo R1200GS código de pieza 51167698437 Se recomienda imprimir con Filamento TPU (shore el que permita su maquina, lo importe es aislar las tuercas de fijación de la humedad ambiente) buenas impresiones
Кронштейн для зеркала заднего вида (типа такого https://aliexpress.ru/item/4000931288460.html ). Подходит для BMW R1200GS 2008-2012, про остальные модели сказать ничего не могу, т.к. не знаю, какие там используются трубы. В этой модели…
A rough replacement for part number 46637681432 Can be just inserted from the top, clicks in place by buldging on the stem Print from the softest TPU you can find. I have printed it on the side with supports for stem part. I find it a bit…
Travel case for the portable router Cudy TR1200. Didn’t bother with hinges or latches—just a simple, (very) thin box. Width = 124mm; length = 84mm; height = 32mm.
Travel case for the portable router Cudy TR1200. Didn’t bother with hinges or latches—just a simple, (very) thin box. Width = 124mm; length = 84mm; height = 32mm.
Ein einfacher Deckel mit BMW Logo um das Loch im Rahmen zu verzieren Konstruiert für 0.2mm Layerhöhe
For 5-hole rims (cast + spoke) PETG is not absolutely necessary, PLA works. I would recommend using 3 - 4 wall lines and 20 - 30% infill. Layer height 0.2 mm. The brand name is used solely for descriptive purposes to indicate the…
Bmw R1200GS - Keychain - Portachiavi - Porte Clès - 钥匙链 -Schlüsselanhänger Update 23/08/2025: added REV1 Versions Update 09/09/2025: added REV2 Versions Update 05/02/2026: added BMW R1200GS Keychain Type C Resize to adjust dimension If…
Oil Filter Wrench Removal Tool for Hiflo HF164/HF165/HF184 & BMW R1200 GS/Adventure - Chiave a tazza per filtro HIFLO HF 164 Bmw Gs R1200gs/Adventure Suitable for: HIFLO HF164 / HF165 / HF184 oil filter / Mahle OC306 Inner Diameter 76mm…
Bracket for mounting second Aux power source i.e touratech twin USB or BMW DIN if not fitted. Needs 2 m6 nuts and longer m6 bolts for fixing Loom cable can be purchased, please message
A bracket that lowers the original fog lights. Use when the original fog lights are catching on the crash bars. R1200GS 2009 motorcycle Uchyt obniżający oryginalne halogeny przeciwmgłowe.Używa się gdy oryginalne halogeny zahaczają o…
Ein einfacher Deckel mit BMW Logo um das Loch im Rahmen zu verzieren Konstruiert für 0.2mm Layerhöhe
BMW R1200GS K50 have two mini panels. The right one for accessing the battery compartment. These are hold on with 1 screw and 2 push and hold rubber inserts. The rubber inserts are often getting lost, so I made my own. Heat them up before…
For 5-hole rims (cast + spoke) PETG is not absolutely necessary, PLA works. I would recommend using 3 - 4 wall lines and 20 - 30% infill. Layer height 0.2 mm. The brand name is used solely for descriptive purposes to indicate the…
Oil Filter Wrench Removal Tool for Hiflo HF164/HF165/HF184 & BMW R1200 GS/Adventure - Chiave a tazza per filtro HIFLO HF 164 Bmw Gs R1200gs/Adventure Suitable for: HIFLO HF164 / HF165 / HF184 oil filter / Mahle OC306 Inner Diameter 76mm…
