141 modeli
Summary This is a model of a Nissan Skyline R32 GT-R in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of integrated connectors.…
Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…
Maximize your storage space and keep things organized with these ER16/32 collet trays. Each tray measures 1 x 4.5 x 4.5 inches. Each ER16 tray has 16 locations in a 4x4 pattern, and the ER32 tray has 9 locations in a 3x3 pattern. Want to…
BMW R32 year 1925 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s All axles are equipped with m3. Likewise the fork pin is m3.
This is a simple stand to hold 20 ER32 collets. Inspired by IcanCwhatUsay's rack for ER20 collets https://www.thingiverse.com/thing:1209041
NOTE: This design is a WORK IN PROGRESS, I don't have any ER collet holders so I don't know how viable this design is. I take no responsibility for any accidents that may result from using these 3D models. ER Collets are often used on…
ER32 collet set - 3D Printed! I aim to use these for light duty work holding in shaped collet holders (also 3D printed!). For example: grinding a hex on a rod. Modelled in PTC Creo 3.0 I created the first part (8mm ID) manually, and then…
Print a cup holder for a R32 Skyline Easy install - Fits perfectly into the center console No Supports Print ready file
A vertical stand for Dell R320. Print two of these. Also fits any other 1U rack mountable thingy with a 43mm side profile.
With this tool you can upgrade your router to be used with a LR32 guiderail Additionally you will need: 2x M4x16mm screws (or 20mm) 2x M4 hex-nuts 1x M6 screw (longer than 35mm) 2x M6 self-locking nuts 1x spring big enough to fit over the…
Fits 12 ER32 collets in a 3x4 Gridfinity pattern
ER32, ER25, and ER16 Collet Holders For Gridfinity Designed to to press fit for magnets for easy insertion and channels for easy removal.
fully modular rack system for ER32 collets. you can print as many elements as you need and connect them together. there are three types in order to be able to build a smooth tray without protruding connectors. ER32_Colletholder - is the…
Please click ❤LIKE❤ if you appreciate my work 😊 he return of “Godzilla” – on your wall. This 3D printable wall-mounted model of the Nissan Skyline GT-R R32 is the perfect decor piece for fans of Japanese performance legends. With its…
A screwless caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: eSUN PLA Notes: Customs…
Arduino case adjusted to fit a Wemos D1 R32 board.
Collet Tray for up to 8 Collets ER16 ER25 ER32
CAT40 Tool Holder Reminder: this is a toy, do not put into a machine I am not responsible to exploded plastic. Assembly Pull stud threads into body Collet snaps into nut Nut threads into body Fits ½ tools Disclaimer: this will not cut…
This is a collet holder for ER32 collets that fits nicely in the drawer of a rolling tool box. It measures 188 mm x 200.5 mm x 25 mm. It is sturdy and holds 25 collets.
a pair of collet set gridfinity storage for imperial and metric ER32 collets, with labels. made as large as possible to fit on the Mk3 print bed. standard 42mm gridfinity plate with magnets. both have the ‘common’ collets i use most…
Hello team, Just for a bit of fun I threw together this model for a Nissan Skyline R32 GTR (BNR32) wheel cap to suit the factory wheels. It's possible to purchase original parts however they are quite expensive, so if you happen to be…
Hello All, Designed with the help of a 3d scanner. Fits the R32 body perfectly. also fitted my R33 Skyline body with just minor interferrence with body posts. It's fixed with M3 Screws frim underneath. I recommend pretreading the 2.8mm…
Organizzatore per Pinze ER32 i 3 pezzi sono ad incastro tra loro e si possono mettere dentro i banchetti da officina. Stampato in PLA+ Nero Altezza Layer 0.2 Nessun supporto necessario. Buona Stampa!!!
Exact copy of rare badge as replacements are hard to find. For best results print in PETG and get chrome plated, the print may warp side to side while plating but can be straightened when fixed to the car
ER32 Collet Holder for Gridfinity Holds 20 on a 4x5 grid.
Gridfinity ER32 Collet Holder (1x1x3) AKA (42mm x 42mm x 25mm) that can hold one (1) ER32 collet.
Praktische Box zum Aufbewahren von ER32 Spannzangen. Jede Ebene findet Platz für 20 Spannzangen. Damit sind die empfindlichen Präzisionsteile vor Schmutz und Spänen geschützt. Das Standard Set besteht aus einem Unterteil, Oberteil und…
Due to aging plastics and design, these sign indicators mount tab would snap right around the support structure begins closer to the housing. I've fashioned the new mounting piece that sandwiches the remaining plastic snug and is easily…
ER11-ER32 wipers for collet holders. Should print best in the original orientation cone down. I printed them on a i3 MK3 with structured bed, 0,4mm Nozzle, PETG, 3 perimeters and 25%infill. For ER11 up to ER20 i suggest using a brim (i…
Makita DRT50 cordless and RT0701 corded ¼" routers plunge base. Slides into track requires two holes to be drilled and tapped.
With six compartments and a section for organizing screws, these trays are stackable with a indexing key to stop them from turning and potentially breaking taller watch parts. More variants to follow soon!!!
Nothing special. See title
Printed with the top of the tray towards the bed of the printer. Printed at 0.2mm Layer height.
Dimensions: 150 x 130 x 29mm and 150 x 64 x 29mm for the halved version Fixed issue where stl models were 10x smaller
DCC Ex Case - Built using a ESP32 D1 R32, Deek Motor Shield and OLED 0.96 SSD1306.
Hey team, A friend of mine recently purchased a Nissan Skyline R32 GTS-T and was, let's say, “dissatisfied” with the interesting aftermarket gear knob that came with the car. Those of you who own / have owned these types of cars may get…
Box to ER32 Collets 18st 2-20mm Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: universa pla orange Category: Machine Tools
I created a custom case for a Sonoff switch to monitor energy consumption while charging an electric vehicle. It's particularly useful for charging at unmetered outlets or at hotels/guesthouses without dedicated EV charging stations, as…
Modeled to use a minimum of material and be dense.
This is a stand to hold 26 ER32 collets.
The Festool LR32 system is a good concept, but the adjustable rail spacers leave much to be desired. They are imprecise, slow, and annoying to use. So I created these spacers, you stick them on the rail and you're done. No adjusting, no…
There are 2 versions on the model: One model that is a solid piece and the other has a small slot to slide the seat belt through so you do not have to remove any interior pieces to fit the piece.
his is an adapter to use the wolfcraft4650 doweling jig together with a makitaRT0700 /DRT50 router. So you can use the router to create any holes in the 32mm system. It has a perfect fit to the plunge base 195563-0 and is fixed with the…
It's printed upside down without supports. Print Settings Printer: Markforged onyx one Rafts: No **Resolution:** 0.1 Infill: 10% **Filament:** Markforged Onyx Nylon/Carbonfibre blackPost-Printing ============= How I Designed This ER 32…
Tray to hold 12 ER32 collets.
For the ARRMA 6s lineup an extended upper base to accommodate larger battery capacities or higher cell count. NOTE This will affect body mounting as the overall height of the battery tray increases (TALION/KRATON) Optional: ARRMA Body…
This piece was useful when I replaced the stock radio and removed the MDI (multi-device interface) center console in the armrest. I installed a Pioneer AVH-W4500NEX system and routed the auxiliary/USB port to the armrest. I also installed…
This is the model I have created for a prototype lever action collet chuck using ER32 collets. I presented the initial idea to my youtube audience and there was lots of feedback - some of it has been incorporated into this model. I have…
Toolholder for the most used ER32 collets to have them organized on the Bench.
Made for a friends Skyline R32 who could not find or get the clips any more
OnStep Shiled for ESPDUINO-32 [WeMos (D1 or D2) R32] telescope goto controller on basen Howard Dutton project My wiring diagram and PCB on EasyEDA Pinmaps for my PCB is included (replace in OnStep\src\pinmaps\Pins.MaxESP3.h) This Shiled…
I needed storage for my milling machine collets, so I drew this up and printed it on my XL. turned out great, now I can have them organized in a tool box or by the mill.
A simple tray for storing ER32 collets. 168x84mm footprint (not Gridfinity design but compatible dimensions)
ER32 Collet Holder. One model is a 4x5 grid and the other is a single holder that can be patterned out to make whatever size grid you need.
My friend went from cable throttle to DBW and forgot to get a block off plate for where the cable came through the firewall, so a few measurements later I made this! Confirmed fitment on R34, but should fit R32 and 33, as well as S13, 14,…
Collet rack to hold ER32 collets. Designed to fit in my tool box draws that measure 565x400 Print face down with no supports, and whatever layer height you're happy with. I've printed them with a .35 layer on a .5 nozzle Filament usage is…
The rear spring pads for Mk4 VW R32s / Mk1 Audi TTs (AWD only) (Part number 1J0512149G) were backordered everywhere when I was installing lowering springs on my TT. Both from VW/Audi directly and from Febi at every retailer I checked.…
A simple small gridfinity piece to hold 2x ER32 size collets used with CNC's I have printed a previous iteration of this design which was meant to be quicker to print but this one uses roughly the same filament and is the same print speed…
Este modelo es un adaptador Doble Manguera diseñado para el aire acondicionado portátil Surrey Smart R32, modelo 551PXQ12N81F, y también es compatible con el aire portátil Midea Smart R-32, modelo MPXH-12-N81F. Permite convertir el equipo…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
About the Model: This 3D-printed model provides a highly realistic representation of the KUKA KR FORTE-2 ultra on a reduced scale of 1:10 and serves as an illustrative exhibit for visualizing one of our heavy-duty robots. The KR FORTEC 2…
This model is a replacement part for the Arrma Vorteks Body posts, includes Fusion 360 models and sliced gcode for CoreOne and Mk3S. AR320357
Gridfinity with magnets, lathe chuck holder for ER32 chuck, and two standard sized collet nuts
Gridfinity Trays for various MT3 Heads: Boringhead 50mm, Drillchuck and ER32 Collet.
LEGO Compatible R32 Fully Ballasted Track Axle connections add rigidity and alignment. Cutouts are for connect against normal track, since printing the clips on the ballast plate make the too rigid to work properly 16 pieces are needed…
Hey team, This is a fairly obscure print for those Nissan R32 GTR owners out there with “N1” headlamps and are missing the central stud which holds on brackets for the centre grille. Example image of the standard stud which should be…
Replacement actuating arms for R32 Skyline centre and side air vents.
Diese Aufbewahrungsbox kann 16 ER32- und 15 ER25-Spannzangen aufnehmen. Formangepasste Vertiefungen sorgen dafür, dass die Spannzangen sicher an ihrem Platz bleiben. This storage box can hold 16 ER32 and 15 ER25 collets. Shape-adapted…
https://s.click.aliexpress.com/e/_mt320q7
AirTag holder to fit inside the fuel flap of a Discovery 3 / 4 or L320 Range Rover Sport The fuel filler flap is a great location, protected from the elements, discrete and being a plastic part doesn't impede the Tags signal. The design…
gridfinity er32 collet holder and his tool
Made for HotWheels Nissan Skyline R32 1/64 toy car. STL with differenc layer height and 3MF files can be found here. I love the GT series, since I had my first experience with it on my PSP, and I tought, the best would be a GT2 themed…
Designed in Rhino3d, printed on a Bambu X1C on the new supertack plate. printed in PETG-HF with 10% infill and 3 walls. Inch tray took aprox. 7.5 hrs and 3.5 hrs for the lid Metric tray took 6.5 hrs and 3.7 hrs for the lid (a little…
Printed mine in PETG 0.4 nozzle 0.3 layer hight and 3 walls, 25% cubic infill Note that the model is so its easy to grab the needed collet because of the angle of the holes. Happy printing !
Wall mount ER32 Collet Holder to get your tooling up and organised!
Borrowed the collet and nut from another model. Collet is 1/4in hex for screwdriver bits.
Holder to hang the haimer where the clipboard is on a Haas CNC machine. Used on Haas V5,VF2, and more. Used ¼-20 bolts with washers and lock nuts. Made with SolidWorks
Simple ER32 Collet holder in 3x3, 2x3 and 1x3 layouts - Untested as of yet. Perfect for organising a small selection.
Small holder for ER32 collets. The holder fits in the Gridfinity grid and its stackable
Designed to suit 11x ER32 collets in a compact form factor Based on a 2x4 standard gridfinity grid.
This was designed as a housing for the packet monitor 32 from DSTIKE. https://github.com/spacehuhn/PacketMonitor32 I got the board on Tindie if you stumbled across this, it is a fun little toy. Other parts: Battery[…
Remixed to hold 20 ER32 collets with a internal divider. Designed to be as compact as possible and fit on 220mm x 220mm print bed. There is a print file for the lettering but I didn’t use it in the end so cannot say if it will fit…
JDM R32 lithophane (no border)
No need for supports, has spots for 7/16 8mm neodymium magnets to affix it to the tool holder. Smaller magnets are fine, just use some hot glue or other adhesive to make sure it stays where its supposed to.
I created this support for D1 R32 (ESP32) and Stepstick Motor Driver in order to work more easily on my protos. I have not tested it yet but I think you can use it with an Arduino Uno. You will need M3 screws to fix the Wemos and for the…
Modification of screen top piece for non screen builds. Also added option without the reset hole.
Dieses außergewöhnliche Plätzchen verbindet handwerklichen Charme mit süßer Versuchung . In Form einer detailreichen Zylinderkopfdichtung ausgestochen, bringt es nicht nur Autofans zum Schmunzeln 🚗✨. Seine präzisen Rundungen und feinen…
DIN rail mounting adapter designed for Milesight industrial routers USR325 . This adapter allows secure installation of the router on standard DIN rails commonly used in electrical cabinets and industrial environments. The model has been…
I've been starting on making my own models, and I've slowly been getting the hang of it. Soon enough, I should be able to get better work done. May this be the first of many to come!!
Nissan Skyline GT-R R32 – Moving Wheels Add the Nissan Skyline GT-R R32 to your collection with this FDM model featuring freely rotating wheels, separate flexible tires and decorative wheel caps. Available in 1:18, 1:24 and 1:64 , the…
Repair i made for a colleages r320 Printed "upright" so the layer lines enclose the original metal shaft and there is no delamination - see screenshot of recommended orientation you just need some kind of binder, i used 2-part composit…
A compact and practical solution for keeping commonly used ER32 accessories together instead of scattered around the workshop. 🙌 ✨ Features 🔩 ER32 square collet nut holders 🔧 ER32 hexagonal collet nut holders 📦 2 compartments for 25 × 50…
Biete hier das 3d Modell einer Original Golf 4 R32 Schaltwippe an. Offering here the 3D model of an original Golf 4 R32 shift paddle.
LEGO Compatible R32 Fully Ballasted Track Axle connections add rigidity and alignment. Cutouts are for connect against normal track, since printing the clips on the ballast plate make the too rigid to work properly 16 pieces are needed…
Borrowed the collet and nut from another model. Collet is 1/4in hex for screwdriver bits.
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
Wall mount ER32 Collet Holder to get your tooling up and organised!
![OnStep Shield for ESPDUINO-32 [WeMos (D1 or D2) R32]](https://media.printables.com/media/prints/164921/images/1532140_65159d71-3ca4-4c50-a771-1359b48c9b19/large_display_6p4_164921.jpg)
