Liczymy pasujące modele…
BMW R60/2 1964 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
With this design you can mount your TP-link ER605 and OC200 the proper way. You wil also need the Ubiquiti Networks ER-RMKIT. I used M3 10mm screws to screw the printed parts together.
A friend recently discovered the TP-Link ER605 Firewall/Router/Switch, great device for the money! Well I needed a way to mount this in my 19nich rack. This 1RU shelf will allow for 1 or 2 ER605 devices to be mounted. Each mount has a…
This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…
TP-Link Omada ER605 and SG2008P 1U Rack Mount
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…
Mix of TL-FC25 and TL-FC32 to help (dis)assembly of bottom brackets by Shimano
This is a 60 mm male adapter for the osVAC system by Hobbyhimmel. Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/ Weitere Adapter von Hobbyhimmel:…
These body mounts allow you to mount the Injora IR60 body on the Redcat Ascent 18 truck. The body hinges on the rear about 120°, allowing it to stay open by itself and have full access to the internals. The front magnetic latch uses two…
Flat on the bottom, no support needed
Round Corner Templates (R5-R60) to help you mark the corners. Just hook the template over the corner and mark it with a pencil.
Remix of @DevineJimmi ‘s 10 inch ER605 rack mount , I’ve added a couple of keystones to help with routing WAN etc in my mini rack. Removed the text too to make it easier to print for me (hope that's ok, please check out the original!)…
Wall mount for TP link Archer MR600 ASA 0,2
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Nach dem meine defekt waren habe ich diese Räder entworfen. Das Design ist nicht ganz frei erfunden, sondern habe mich da an welchen aus dem Internet orientiert. Das ganze ist mein erstes Modell, bei Änderungsvorschlägen oder sonstigem…
This is a replacement differential cover for an AR60 axle. The original model is by Michael Salem from GrabCad: https://grabcad.com/library/axial-wraith-rock-crawler-buggy-1 I've modified it for size and strength. The rim and braces are…
This attachment should be printed with at least 3 wall lines and made of UV-resistant material. PLA is not suitable. I printed it myself from PETG-CF and it has withstood the strain on my DR650 RSE for 1.5 years without any problems. Very…
HC-SR602 pir motion sensor module dummy to help designing holders for it
Half-width (9.5") rack mount for TP-Link ER605 Omada router. Mount the router using two M5 bolts.
The MR60FDA2 and MR60BHA2 Sensor leverage 60GHz mmWave technology and offer reliable human presence & fall detection, and human presence, breathing and heartbeat detection respectively. Featuring light level sensing, an RGB LED for…
Cup wrench and insert tools designed to fit a BBR60 bottom bracket. The insert was designed to fit a Parktools BBT-9. Can't really speak to longevity when using these tools, but please (please!) wear eye protection and appropriate safety…
Einfache Halterung für einen TP-LINK ER605 Router. Senkrechte Montage in einem Serverschrank, passend zu den höhen Einheiten. Gedruckt habe ich es aus PETG Zur Befestigung habe ich Senkkopfschrauben in M4 genommen es passen auch 4mm…
I wanted something to properly store the beurer BR60 insect bite healer, so I created this case which also holds two replacement batteries. A model for the mosquito imprint is available, so it can be printed in multicolor. Prints without…
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…
Dashcam holder for Citroen Berlingo III family (2019+ - also Toyota Proace City, Peugeot Partner, Opel Combo) behind the infotaiment panel. Top part has slot for Navitel R600 dashcam but you can change it for whatever camera you're using.…
3D printing protective sleeve shell skin housing for Futaba R6014 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: Spectrum PLA / TPU / PET Category: R/C Vehicles
Utilizes OE hardware to preserve thread holes and cover area.
I tried the original on an SMT-10 and it broke very quickly. The core of this is waverjones' https://www.thingiverse.com/thing:429405 The body wall and arms are thicker to provide more strength. I also reshaped the arms and angled the…
I wanted to rack mount my ER605 router and POE160S POE injector on the same unit. You need two M5 bolts to connect the two halves. It's a bit flimsy, but you won't touch this everyday. Dimensions: Router: 158 × 101 × 25 mm POE injector:…
Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: WYZ Works PLA Black Category: Automotive
Printed in PETG Suggestion: Print at a 45 degree angle with the screw holes and pegs facing up. Support: Tree/organic Infill: I used 15% but I suggest 25-45% but I have had no issue so far Device clicks in place, I added stand-offs…
Tool for manipulating mechanicals when you replace the strings
Tascam DR60d mkii Spare part - Clip 23.01.2020 Not finished I got so issues with the size off the holes. But i drilled a hole with 3mm it works, but not perfect. i will update it soon. My Grip Clip broke off and the cosntruction fall…
Als Datei ist das Gehäuse und eine TPU Klappe dabei um denn stecker dicht zu machen, kann nach bedarf hoch unter runter sklaliert werden. Benötigt werden zwei M4 Schrauben. Der stecker selbst wird einfach von hinten ins Gehäuse…
náhradní kryt diferenciálu pro nápravu Axial AR60 (AX80069) Ideálně tisknout z PETG
For normal 256mm square print beds, this design needs to be printed on its head as shown on the third picture. Brim and either a smoother plate or even glue is recommended to assure it doesn't fall during the print. For the highest…
The stock limiter that comes with the RIA VR60/VR80 9rd shotgun magazine is designed to only allow 9 shotgun shells maximum. However, if you reduce the size of that limiter you can actually squeeze a 10th shell in the magazine. So I give…
Modified to size to match the Air60v2, also included a way to hold the wrist rest to the keyboard using the keyboard fee
UM-R60 Urbanmech for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • um-r60-4.stl…
A cookie cutter based on the logo of the "Omas gegen Rechts" (Grandmas against the Right-wing). Perfect for community events, rallies, or simply making a statement at the coffee table! This design was created using the official SVG…
A rear brake guide that fits the mounting bushes on HEL Performance, It will probably fit the old brake lines as well. Easy to print without supports in PETG, print with the fonda text parallel to the print bed. Colour matching optional…
It's designed for ⌀8*2.7 mm magnets and for a 40 mm wide steel girder, but the dimensions of box, wall thickness, pir sensor eye position, spacing, magnet size can be changed in the first lines. It also might be needed to change the arch…
Here is a jig for a 40mm pipe bend. This jig is made up of two part connected with two M6 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
panel mount connector for the amass mr60 3-pin connector. uses m3 screws, max panel width 4mm? I designed this for sheet metal.
Covers for MR60 connectors. After soldering cables smear 5 minute epoxy onto the soldered joins and the end of the connector. pull cable back and click connector into place. once dry, fill with regular epoxy. The tpu ring provides a seal.…
Couldn't buy Honda CBR600F4 replacement, rear brake hose guides as they where sold out everywhere or £30 delivery… seems to do the job, hopefully wont melt, keep zip ties on the hose until you feel it will stand up to the test.
You do need a bigger than normal printer for this track piece, 280x280mm or more is required. You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors,…
The original rubber brake line setup has a hose line splitter mounted on the right mudguard, new braided steel brake lines often come as a “race” setup, two separate lines meaning the splitter isn't required nor useable as a mount. This…
I made this to mount my router by hanging it from an existing picture hook. I printed it upright with a brim and supports in PLA. If you're going to print this, make sure you have tuned your printer very well for dimensional accuracy, as…
This camera attachment is for a Mini Cooper Countryman 2010-2016 (R60). No modifying the car needed. Just fasten it behind the number plate lighting (see pictures). The pictures are from an older version, but the idea is the same. I made…
Minor edit to the gear which spins the base to provide consistent support of the cone holder.
This part lets you mount a Shimano Di2 SW-R600 remote shifter to a bicycle handlebar with 22.2mm (7/8") diameter. That shifter is usually mounted with two zip ties and some tape, but on my bike that was very flimsy and the shifter…
What it is for It is mounted using base from sunglasses case that is placed between front row of seats in MINI R60 (Countryman in my case). If smartphone is placed in parallel with car direction, it won't block hand brake and very…
A remix of Sascha4532's excellent r600 wheel, split into two parts to allow for re-printing of the tyre as and when it wears out. The main wheel body can be printed in PETG or PLA, and the tyre was printed in TPU. You can use m5 bolts to…
Sturdy bracket designed to fit an ER605 into a DAP 2 HE (or similar) 19" rack cage (i.e. this ), in which it occupies 4 of the 10 segments/units. Expects that M3 machine screws are used to fasten the rear retention clip in place and to…
Cover your FD cable plug when disassembled from your Foil Drive system to keep dust, sand, etc. out. Snaps snugly into place. I recommend PETG. A stiff 95A TPU might also work. I think PLA would be too brittle. See my other related parts…
Replacement Diff carrier for any AR60 Based Axial Racing rigs Print Settings Printer Brand: Creality Printer: Ender-3 V3 KE **Rafts:** No Supports: No **Resolution:** 0.2 mm layer height Infill: 100% **Filament:** eSUN PETG Solid Black…
i have replaced my original battery holder on my Ibanez SR600 for a new one from amazone.
Print in petg-cf or ASA, for motors with attached wires like the flipsky 6384, feed the wires through the 3 holes on top, then solder the MR60 connector, push the MR60 connector into the housing until it rests against the backstop lip.…
19'' rack 1U plate suitable for ER605 router and OC200 hardware controller. Separaded to fit almost every printer
If your Nutone fan dies, and you want to buy a new one, the fan is now smaller and the brackets it comes with will not match up. I printed this in PETG, I would imagine any copolymer would be best.
Replacement recoil spring guide for Army Armament R604 Hi-Capa
stuntrider DuIvan (https://www.youtube.com/@duivan)
This is a custom-designed spacer for the turn signal lights on a 2003 Suzuki GSXR600 (K3 series). The spacer offsets the turn signal slightly away from the fairing, making the lights more visible from different angles. Useful for…
Deckboxes for the Lair600+ from GameGenic. Fits three boxes per row (see pictures) I tested the box with dual sleeved commanderdecks and diverse sleeves: inner sleeves are always KMC perfect fit(100 pack) Gamegenic-Sleeves - great fit…
Those clip-like parts like to break. This is a replacement part.
This adapter fits inside the throttle switch box housing on the right side clip-on. If the model doesn't fit well, you can make a copy with OnShape, and adapt it there . Warning Use this 3D model at your own risk. The author is not…
This is a wrench sized for 41mm bottom brackets with 16 indents, specifically the Shimano SM-BBR60. It has a 1/2" square drive boss for use with a torque wrench (Always use at 90 degrees to the handle of the torque wrench to maintain…
This is a bed cover for the INJORA IR60 SCX24 body. It snaps into place and requires no glue or screws. You can print the whole thing as one piece or two separate pieces depending on your setup. I printed this on a Flashforge Adventurer…
Need to disassemble the station, remove the old sockets and replace with printed ones Printing with supports In my case, the fill rate is 100% link to disassembly and replacement video: https://youtu.be/s3aDQyGAlJo Category: Electronics
Printed in PETG with 2MM walls and top/bottom. Designed for 9x9 print bed, so the wire stub did not fit on the whole model. Used silicone on top of screws to affix to the old box.
This plate is meant to be 1/2" steel. I printed it to mock it up to the transmission. It mounts from the tail stock to a Energy Suspension 3.1108R.
Make sure you print with Arachne mode on as it has thin walls to grip the battery. I needed a LR41 but I only had LR60 batteries. I made this adapter parametric, so you just need to put in 4 dimensions: Larger battery diameter & height…
left piece for 1U rack 19inch to accommodate a TP-Link Omada ER605 Router
Snap-fit enclosure for the TI EVM430-FR6047 ultrasonic flow-metering EVM. STEP + FreeCAD source included.
Need to disassemble the station, remove the old sockets and replace with printed ones Printing with supports In my case, the fill rate is 100% link to disassembly and replacement video: https://youtu.be/s3aDQyGAlJo Category: Electronics
I wanted to rack mount my ER605 router and POE160S POE injector on the same unit. You need two M5 bolts to connect the two halves. It's a bit flimsy, but you won't touch this everyday. Dimensions: Router: 158 × 101 × 25 mm POE injector:…
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
BMW R60/2 1964 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s
With the Smart Relay Holder , you can install smart relays such as the Salsus SR600 , DI600 , or Shelly modules neatly and securely inside a Hager meter cabinet . The holder ensures an organized and stable placement of the relays and…
Printed in PETG with 2MM walls and top/bottom. Designed for 9x9 print bed, so the wire stub did not fit on the whole model. Used silicone on top of screws to affix to the old box.
Minor edit to the gear which spins the base to provide consistent support of the cone holder.
You do need a bigger than normal printer for this track piece, 280x280mm or more is required. You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors,…
náhradní kryt diferenciálu pro nápravu Axial AR60 (AX80069) Ideálně tisknout z PETG
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Modified Jimmi's 10" ER605 Rackmount design to suit a 19" full-width rack, with the extra space being used for a 12-port keystone panel. This panel is removable so you can remove or replace keystones without needing to un-rack the entire…
With the Smart Relay Holder , you can install smart relays such as the Salsus SR600 , DI600 , or Shelly modules neatly and securely inside a Hager meter cabinet . The holder ensures an organized and stable placement of the relays and…
tool to hold the clutch in order to remove it. made for 1987 XR600 R. Print 2 or 3 times in PLA fit isn't perfect but it does work.
