Liczymy pasujące modele…
Rancher 4×4 – 3d printable set of parts for your 3d printer. Model is approx. 53 cm long (1:8 scale) and is prepared for your RC equipment. You can buy this model on www.3dsets.com What you get: 3d printing files: .stl and .gcode…
I found some files for the jeep rancher angry eyes but they were separate and required super gluing or screwing on. I had issues printing these and getting it to look clean due to supports being needed so I combined the two models and…
"How can I get this rope up there ??" You don't need this tool... until you do! Simple to print, and should fit on any broom handle or extendable pole with a tapered end. You can optionally add screws to prevent it falling off the end.…
To increase yields and flowering, young shoots on plants should be brought into a horizontal position in July-August before they harden. This is very easy to do with this clip and is much easier than tying or weighting. The horizontal…
A fierce Halloween bat statue – perched on a twisted branch, wings spread wide, ready to strike! Tree supports - reinforced wings, back seam position. ✅ 150 mm tall – detailed and striking Halloween decoration ✅ Dynamic bat pose with…
A detailed crow statue perched on a twisted branch – the perfect Halloween centerpiece! Tree supports - reinforced back feathers, back seam position. ✅ 160 mm tall – elegant yet spooky design ✅ Perched crow with open beak, as if calling…
Some tweaking for the rim on add slot to have more grip inside the tire and make it bigger than the original for about 3mm so can get more tight i use the 1.9/107mm inch tires Hope this help Big Thanks for the 3d sets
Stand for 3Dsets Jeep Rancher Wagon 4x4. Category: Vehicles
You can stick this Y-shaped support piece on a bamboo stick with the preferred length. Stick diameter is 16 mm max. The hole is conical to also acoomodate smaller diameters. Scale it up/down for your application. Should be 100% infill at…
Hello friends from all over the world :) Some people think, that swabians are very stingy. That may be true to some degree, but you can express it in a more optimistic way: swabians like to save resources! I designed this vase to have a…
Allow the print to cool completely before removing it from the print bed. Remove from the print bed very carefully. If you need a different size, please adjust the size of the model according to your own needs. Print first one milimeter…
A design study with the new organic supports of PrusaSlicer 2.6.0-beta2 My goal was to force the support algorithm to use designated connection points on the model which I have accomplished by a thin spiral shaped overhang on the goblet.…
After a while the bumpers on the Grüntek X-25 professional branch cutters got loose and one was lost in the grass. So I took the one that was left and recreated the model. Considering the outdoor usage and the impact it should handle, I…
Add a touch of natural magic and order to your home with our Tree Branch Organizer. This unique tree-shaped organizer is not only a practical solution for storing writing supplies but also a stylish accessory that will instantly enhance…
Large (as large as my printer allows) multiple entrance wood textured cave. ~15cm X 12cm X 20.9cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make it unsuitable for significant…
A set of several Baby's Breath (Gypsophila) twigs perfect for creating or adding detail and body to your tabletop trees, shrubs, or other flora! The PLA is thin enough to easily heat and bend into whatever shape you want, and they look…
What more could you want than 50 slimes in your home
Ditch the overflowing jewelry boxes and tangled rings! This stunning 3D printed jewelry tree offers a stylish and functional way to organize your collection. Crafted using eco-friendly 3D printing technology, the design features a…
The Sharp Branches Vase is a captivating fusion of nature-inspired design and modern aesthetics. Its deep matte black finish showcases intricate, sharp branch-like patterns carved into its surface, creating a bold and sophisticated…
You have option!! Four option on the pintle hitch alone Pintle hitch . Connects with 3mm eye bolt. Works better and cost less. https://amzn.to/3W2ogoN (US Amazon Affiliate link) Strongest Pintle- Uses a 3mm Eye Bolt cut to to allow the…
Modified the Lego Wreath by MagnumDanger to have a loop to hang the wreath up nicely and to be in the correct scale as the other branches.
print setup (bambu lab P1P): wall loops = 2 infill density = 15% layer hight = 0.2mm support is optional Filament = Elagoo PLA 1.75 (210°C)
Lots of people have downloaded my clay rollers. Here's another fun way to add texture and patterns to clay projects, as easy as rolling a ball. Each Clay Stamp Ball is 65mm in diameter, just a bit smaller than a hard baseball. It fits…
Fish Tank Decor - Coral branch
Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…
🌹💀 Rose Branch Skull – Gothic Elegance Meets Nature Bring a touch of dark elegance to your prints with this Rose Branch Skull – a striking fusion of life and death, where twisting thorned vines and leaves embrace a detailed human skull,…
US Military Switch Plates For best results print with logo facing up, with supports, and ironing enabled, the back side will be rough but will be hidden when installed. 40% or higher infill recommended a pause is suggested to change…
Angry eyes for Rancher jeep from 3dsets.com To be glued on top of the default grill Print instructions No tested yet, let me know how it prints and fits
Modified front panel so that the angry eyes grill fits over it. Both parts easy to print flat on the printer. Made holes to replace the two upper 3 x 10 mm screws with 3 x 12 mm screws to secure together the angry eyes mask, front panel…
Just to clarify - this model contains changed files only (based on Model 6 v 1.1.2), to build the whole thing you need other parts from one of the Rancher models from 3DSets:…
Easy to print. Can be made in pla, petg or abs. Can be scaled to desired size.
Fits all the components of Spirit Island + Branch & Claw + Jagged Earth + Feather & Flame in a single box, with minimal lid lift (9.6mm), for sleeved cards. I only left the rulebooks and helper cards out - everything else is in the box.
This is open differential for Jeep Rancher from 3dsets. I test it on version Wagon, but should be possible to mount it also on other versions. I created it this open diferencial, because I'm using my Rancher in house on vinyl floor and…
These parts allow you to mount standard 12mm hex wheels to your 3D Sets Rancher. The parts include a 12mm sleeve and a 12mm diameter washer to keep the 3mm screw centered. Don't know what this is? Check out the fully 3D printable 4WD RC…
Slime statue flowerpot I made for my bonsai tree. I printed this one scaled to 120 %. Supports are recommended for the top part of the mouth (organic supports worked best for me). The plort should hold inside without glue. I printed mine…
Simple branch trainer in three sizes to help maximize yield. I printed them in PETG. I designed specifically so that supports are NOT required. I printed a set of each size in different colors so I knew which were which. If you like the…
The textured moon was remixed from Wolf howling at the moon by Jonn2k - Thingiverse . The lithophane must be printed at 100% infill to get the proper effect. The cat and branch came from thingiverse but the link is no longer working…
A simple tree branch, I used it in between 2 shelfs in the kitchen to make it look more magical.
First, a slight apology, I am missing my files from the centre of the vacpack. You will have to model these yourself. To be honest, they would have to be varied depending on the motor you have, and the gearing that works for you. Also,…
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
Skywalker Lightsaber from the Empire Strikes Back, based on the Ranch version. My previous lightsaber was a screw on, but since that cause so many issues I moved away to a press fit design that will be held in place with a little bit of…
This one I designed to use less filament than other versions of an alignment tool I've seen. Once the angle is set it requires lifting the alignment took up or down to remove from the two joined branches. This is designed with a 60 degree…
Another tree branch that I used in my kitchen, for the magical vibes.
I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets. I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer.…
Enchant your space with this wand holder inspired by the wizarding world. Crafted atop a charming owl, this holder brings a touch of Harry Potter whimsy to your wand collection. A functional and stylish tribute to the wizarding realm.…
A branch bender optimized for 3D printing. The original one was too thin when scaled down for printing it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 **Filament:** - PLA…
Added a branch. I tried printing it in two parts, but my printer struggled a lot with the feet so doing it like this made it easier. This requires a lot of supports on the underside of the branch, and likely on the crow itself too so it…
A Branch Blight. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This playful model depicts a sloth hanging from a tree branch, perfect as a small decoration. Print with supports. No AMS required.
Meet Dranchy , the fantasy alternative to the classic 3DBenchy! This cute dragon test print is designed to check your 3D printer’s performance while giving you a fun collectible model. Print in under 1 hour and test: Overhangs Bridging…
The unique design of the stand, inspired by the natural structure of wood , not only constitutes an intriguing aesthetic accent in any setting 🏞, but most importantly, ensures ergonomic and safe storage for the headphones 🎧. Proper…
!!!!! Please read before building. This is a metal geared axle and transmission conversion for the popular 3Dsets Landy, Rancher and Bamboo. Axle ratios are 3:1 to 4:1 the original 3Dsets axles are only 1.8:1. The axles and transmission…
Filament Type: PLA or PETG Nozzle Size: 0.4 mm Layer Height: 0.1 - 0.2 mm Print Speed: 40 - 60 mm/s Infill: 10-20% (depending on the size and purpose) Nozzle Temperature: 190-210°C (for PLA), 230-250°C (for PETG) Bed Temperature: 50-60°C…
To the Train Station!
Branch Out! A turn-based balancing game of luck, skill, and shaky hands for up to 4 players. Branch Out! is a tense and playful tabletop game where players take turns growing a shared tree — one risky branch at a time. Every placement…
This is a detailed, exotic piece of terrain that's perfect for science fiction or fantasy tabletop gaming. A very organic, natural feel even though it was created using fractal math. There are details and textures everywhere - rough…
s'imprime a plat sans support attention au réglage de votre imprimante pour le jeu de fonctionnement.
I wanted a pattern to use on a bag I was making so I turned an image into STL and printed two plates of it, mirroring. When printing on fabric use the layer high same as fabric thickness, my Thule is 0.14mm. Also, it's good to use a…
This is the interior found on Southern Railway coaches as rebuilt 1948-1955, in the 1050 to 1080 series. Mostly these cars received a refreshed interior with reclining seats. These cars were used in revenue trains, the Southern steam…
Na fixaci dílu používám trochu lepidla, ale není to nutné.
Simple printing settings with any PLA. Tree with birds wall art
This is a ranch-style fence created for an o-scale 1:48 model train layout. It can be scaled to fit any other scale or just printed for decoration - (ho scale is 50% scaled, and n scale is roughly 25% scaled). Printing Instructions…
GT2 Belt Gearbox for Landy/Rancher/Bamboo 3DSets models. Use it with my Metal transmission, gears and axles mod This gearbox has a ratio of 4:1. Paired with the AR44 33/8T gears, it is the same overall ratio as original 3DSets model. You…
One of five slimes that I made a little after Christmas. Supports? No supports are required
One of five slimes that I made a little after Christmas. Supports? No supports required
The textured moon was remixed from Wolf howling at the moon by Jonn2k - Thingiverse . The lithophane must be printed at 100% infill to get the proper effect. The branch was remixed from thingiverse but the link is no longer working…
05-01-2023 Ver. II added back holder for eyeglasses. This part can be glued with double sided tape to the owl stand. Model of owl and base doesn't change. Stand for eyeglass-Owl on branch. Not designed for multi material. For better…
Model is designed from scratch, based on Tube Doorsteps for Model 1 & 2 Required screws for assembly: 8x M3x10 2x M3x8 (rear screws) Intended to look good with accessory Tube Fender Flares for Model 1, 2, 6 , but it will fit with the…
Modular segmented back light for Rancher from www.3Dsets.com
The simple design can be printed on a 0.4 mm nozzle. The detailed design needs to be printed with a 0.25 mm nozzle. I made them to fit a standard poker chip tray.
Found this model on sketchfab.com and altered so it could be exported as an STL and printed. All credit to the original owner, thanks for the great design!
Forged from the molten plastic in Shindong, China now with a new look for "The Hypno Ring" now 3D printable for everyone to enjoy. (recommended to use supports if you wanna make it, flip it facing towards the camera and make it look up…
The cat and branch came from thingiverse but the link is no longer working (http://www.thingiverse.com/thing:3421257, Cat on a tree - 2D Wall Art by TWDesign). I clipped it from the top layer of…
I reproduced the hooks that hold the branches of Christmas trees. How many Christmas trees have I seen thrown away because these hooks have a short lifespan, well all you need to do is print my project and you will save your Christmas. no…
This model set includes a two part mold that can be clamped together as well as a single part, fully enclosed mold. Both options allow you to pour in your medium of choice from the top to end up with a nice flat bottom and smooth top. If…
FRONT LIGHTS: I used silver filament for the light and black for the shape. Transparent filament for the turn signals. Then I cutted 2 circular shapes from the plexiglass used for the glasses of the model. BACK LIGHTS: I used black…
Printed well with PLA and PETG 0.4 and 0.6 nozzles. You can adjust the STL to have a different height or width of the holder to accommodate different types of plants.
I made this as part of a trio of slimes (the other two being the puddle and quicksilver slime). Supports? You shouldn't need supports, but if you print large enough, your slicer program might add supports under the eyes. I didn't have a…
This adorable koala figurine captures the charm and playfulness of one of nature's sweetest creatures. Sitting comfortably on a tree branch, the koala features gentle curves and a calm expression, making it an inviting addition to any…
One of five slimes that I made a little after Christmas. Supports? The only part that should need support is the sphere
Vor dem Backen die Schablone auf den Teigling legen und mit Mehl bestreuen. 67x200cm
A model based on the game slime rancher I had created on a 3d printer then painted with Mont Marto brand acrylic paint. Model made in blender.
I used PLA to print it. Just make sure it's lying flat on the build plate in your slicer, so you don't get odd messages. I was able to print it without supports or any build plate adhesion extras. But it probably is best to have a heated…
I printed this out of carbon fiber infused nylon. I varied the wall thickness based on branch thickness. Several walls is likely necessary but I'm open to feedback. Use a machine bolt and nut to torque the arms to the desired position.
My tire kept slipping on my rim with my Rancher wheels and Super Swamper tires. These rings help you "lock" the tire in place. There is also an option to use M3 nuts as weights — 48 per lock ring. Enjoy and post your makes! If you found…
BranchGuide is a simple 3D printed LST (Low Stress Training) stake system designed to guide plant branches outward without pinching or damaging stems. Designed to train branches outward while keeping stems relaxed and natural. I’ve never…
3Dsets Jeep Rancher 4x4 Light with hole for 5mm led Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 25% Filament: Inland PLA Black/White Category: R/C Vehicles
Oak branch with acorns and leaves Nice autumn decoration. The parts of the acorn are connected with a connector. When printing the leaf, switch the color at a height of 0.4mm - to highlight the leaf drawing For a more realistic look of…
This is a remake of a previous model I made that got ruined during printing. Most of the work went towards making the model more compatible with printing, although the ears and side stripes were redone completely. Supports? Like the Tabby…
Machine : Creality Ender 3Pro Matériau : PLA Température buse : 200° Température plateau : 60° Hauteur de couche : 0,2mm Épaisseur de la paroi : 0,8mm Épaisseur du dessous : 0,8mm Épaisseur du dessus : 0,8mm Remplissage : 20% Motif de…
In the Railway Series, Annie and Clarabel were illustrated as double bogie coaches since Tank Engine Thomas Again where they got their first illustrated appearance. while how they're illustrated would change slightly throughout the…
🇺🇸 Welcome to Texas! This model was created in Tinkercad by Dany Sánchez . Cadillac Ranch is a public art installation and sculpture in Amarillo, Texas, USA . It was created in 1974 by Chip Lord, Hudson Marquez and Doug Michels, who were…
I made this as part of a trio of slimes (the other two being the fire and puddle slime). Supports? You shouldn't need supports in any place besides the long horn things, but if you print large enough, your slicer program might add…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Plant clip for sticking branches to walls minimalistic design for minimal visibility & filament saving
The sanctity of marriage is commonly commemorated by wearing precious rings throughout the day. However, at the end of the day, neither my wife nor I like having them on whilst we sleep. So, after a day of trimming our fruit trees, I…
