Liczymy pasujące modele…
This version of the carboard spool rim has a tighter fit than the original, which seems to work better when used on Polymaker rolls, though I was still having problems on some rolls with them coming off. Instead of gluing, I added some…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is a fast printing, fully parameterized cardboard style box. Why I did this I made this because I hated to print forever when I needed a little box, like a gift box or a container for srews or whatnot. This model is only 2 layers…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Joe3020 fitted an adapter for 10MM bearings for Overture cardboard spool, I remixed it to work on most spool holders. This adapter to insert into certain cardboard spools to reduce the amount of cardboard dust from spinning against the…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
Changes It's markedly longer + Helps the guide establish a firmer footing + Helps so your hand is less likely to catch on the cardboard; cardboard cuts are no fun It's also taller (more space between the cardboard guide and the grip top)…
Wydruk około 5,14 €–6,29 € nettoWstępna wycena jednego wariantu
Cardboard filament spools do not unwind easily on a spool holder. Two of these rings reduce the friction. On user request, I added 2 larger versions: Standard is 54mm diameter. This one should fit Larger version with 54.4mm diameter for…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
What is it for ? I designed this fold roller (I know it looks like a pizza cutter ^^) to make clean folds on cardboards. Hardware needed : I used a section of brass cylinder (external diameter : 5mm, internal diameter : ~4mm) to act as a…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter inserts into certain cardboard spools to eliminate the cardboard dust from spinning against the spool holders. Fits cardboard spools: Polymaker Overture Inland (Microcenter) Duramic I personally use Polymaker filament because…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
“Important - resize to 100.75 in Prusaslicer for Inland PLA. This then snaps on around it. This is a simple rim. Print in PETG .25 layer height. You might also try 100.65 resize for a little tighter fit and see which one you prefer.” STL…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
cardboard shelves from up-cycled cardboard boxes. organize your stuff with up-cycled cardboard boxes in a construction similar to dexion. assembling time, approximately 1h30m (for 3 shelves) what you will need to buy (approximately 3€)…
Wydruk około 9,01 €–11,02 € nettoWstępna wycena jednego wariantu
Print it and press it on the cardboard box. It is often so helpfull to find the best colour/material for your next print. You can use it also for other cardbord boxes. Next sign for PETG will follow. You do not need support material. I…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
This design is intended to upgrade your terraforming mars cardboards. The model is especially designed in the style of the game to fit flawlessly in your existing game. You need additional parts: 12pcs tapping screws 2.9 x 9.5mm (…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Important - resize to 100.75 in Prusaslicer for Inland PLA. This then snaps on around it. This is a simple rim. Print in PETG .25 layer height. You might also try 100.65 resize for a little tighter fit and see which one you prefer. 100.65…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Love the knife but didn't like that it didn't have a sheath so I made one. Has some flexures to keep it on the blade. Print in PLA at .3mm layer height. Prints in 30 minutes and you can edit the text in PrusaSlicer to say whatever you'd…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
I found a couple of good models but never quite the right thing. I stumbled upon @WHerzog who had a better screw with a thread that didn't sag on the print bed. While this was excellent - I found it wasn't correctly sized for the MakeDo…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Ever notice how cardboard spools leave that fine dust on your spool holder over time due to the cardboard degradation? Cut down the friction and let your cardboard spools spin freely again. Works great with Repkord RackStands and also a…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small grids are super useful for organizing stuff in moving boxes, closets, cabinets, drawers and so on. But 3d printing big ones would take a lot of time and filament, and require you to have a huge printer. Luckily cardboard exists and…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
3D Printy has provided a great tool, but let's face it, most folks don't want to learn a new language and would rather just have the STL. This set of STLs are specific to the Prusament spools with the cardboard center as well as Hatchbox…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
If you shop at Microcenter like I do, these are a nice addition to help your cardboard spools spin. (Can Possibly Fit Other Spools) Print Settings: Layer Height: .2mm Walls: 3 Top/Bottom Layers: 4 Infill: 10% (no need for more) Supports:…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Hole in the cardboard/plasterboard must be from 7.8 to 8.1 mm max.
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Easy click in and out spool core. This one fits Overature and Duramic spools or any at the 54.5-56mm dia core and spool width up to 70 mm. I had once upon a time printed a core someone else had made for a different spool that fit, but all…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
I needed a medium size nut to fit cardboard spools with a hole width of 56 mm diameter. With the default nuts in Michal Fanta 's Gravity spoolholder for MMU2S , my cardboard spools hit the bottom edge of the spoolholder, preventing them…
Wydruk około 3,29 €–4,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter for 53mm & 54mm inner diameter cardboard spools to remove friction from the cardboard moving on plastic. 54mm is tested to fit Overture spools 53mm fits JAYO and Elegoo spools
Wydruk około 1,31 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ring zum aufstecken für leichtgängiges abrollen und um Staub beim abrollen zu verhindern. Perfekter Sitz auf eSun PLA Matte *** Ring for climbing for easy -to -smooth rolling and preventing dust when rolling off. Perfect seat on Esun Pla…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Overture / PolyMaker PETG Cardboard filament Insert .
Wydruk około 2,39 €–2,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Walls to Prusament cardboard box. Flexible with one to five gaps. Print instructions Combine as you like.
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
used to make 3 mm "L" shaped displays out of cardboard
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
A very simple (if over-engineered :) bracket designed to hold a right-angle in a piece of corrugated cardboard 6mm (nominally ¼"). The bracket has holes to optionally push brads (small nails) through to help hold the cardboard in place.…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu
I love @jake_social 's idea of recycling the cardboard from the empty Prusament spools and making storage boxes out of them! Only the design didn't seem quite complete to me. So I made a few small changes : I transferred the design from…
Wydruk około 8,97 €–10,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Works best with https://www.printables.com/model/74667-prusa-filament-distance-pieces-falcosign Print settings: layer: 0.28 perimeters: 2 top: 4 bottom: 3 infill: 15%, grid support: NO
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
This adapter inserts into certain cardboard spools to eliminate the cardboard dust from spinning against the spool holders. Fits Printed Solid Jessie cardboard spools and other spools with a 58mm inner diameter. See the original model for…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: In the position specified in the .gcode file, the bowl just fits into the build volume of an MKS3+. Requires printing with supports. Quality with 0.3mm sufficient for the purpose. I designed the size for the existing stone shell,…
Wydruk około 9,56 €–11,68 € nettoWstępna wycena jednego wariantu
Template for cutting protective cardboard pieces for shipping CGC graded card slabs.
Wydruk około 2,31 €–2,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A piece to join two rolls of cardboard tube to make a longer cylinder. Different brands of cardboard tube use different measurements. For example, Kirkland brand paper towels and toilet paper fits best with a 42mm diameter join.…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Ever wondered what to do with Google Cardboard VR Glasses you may have lying around? Look no further. With this print, you can turn the fresnel lenses that you find in Cardboards into an eye loupe. The model is designed for one 25 mm…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
I really liked Zackenrad by Jack , however I could not print bearing rotation as designed. I created rotating joint version so I can print using my 3D printer configurations. Print Filament : PLA Layer height : 0.1mm - I used 0.1mm for…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
a remixed model to let bottles stay fixed at mid air even when the box is shaked
Wydruk około 3,02 €–3,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model because I wanted to start buying refills instead of whole spools but didn't want to buy reusable spools or use 200g of filament to print a reusable spool. I printed mine with a .8mm nozzle, .3mm layer height, 1…
Wydruk około 3,31 €–4,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Another adapter for the printed solid Jessie spools now that they are moving to cardboard spools. I didnt want to miss out on using my repwinder for the most common spools I used, so I did a ton of remixing to make this work. You…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
The Ultimate Unboxing Companion Tired of dull kitchen knives or struggling with taped boxes? This Cardboard Cutter is a dedicated 3D-printable tool designed to make unboxing safer and more efficient. It’s lightweight, ergonomic, and…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
EN: As it occurred to me that the stone bowl for which I designed the tub may not be widely used, I had the idea of creating a stand for this bird bath / trough. You can find the trough at: See also: Grid for birdbath: Material: PLA /…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
What is it? A way to add strong, removable, and cheap handles to cardboard boxes that can be comfortable and carry large weights. How do you print it? The handle should be printed with hooks on the print bed, facing UP. This reduces…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
While printing for a long time, I noticed that the cardboard roll wears out, which creates dust, which is an undesirable phenomenon when the bed is closed. The sleeves effectively reduce this, so there is no dust at all.
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
Same print settings as Donut's model minus the brim. I didn't need it on my Prusa MK4. Print Settings: Layer Height: .2mm Perimeters: 3 Top/Bottom Layers: 4 Infill: 10% (no need for more) Supports: No
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
I don't like to do anything in plastic. My favorite material is wood but 3d printing is the perfect add-on to that. So I designed one holder for workshop towels and kitchen paper towels (core ~40mm) for wood (if you are interested in the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
I have already created a remix of the Prusa.Box ( see here ), which served as the basis for this pen holder. The lid and lettering were adjusted accordingly. The screw lid gave way to a lid with a hole, so that the box can now also…
Wydruk około 6,07 €–7,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After a long 13-hour print, I noticed a lot of cardboard dust from my filament spool rotating on the spool holder. The friction was slowly grinding down the cardboard edge. To solve this everyday annoyance, I designed this 60mm bolt and…
Wydruk około 3,85 €–4,70 € nettoWstępna wycena jednego wariantu
We make DIY fire starter logs using waste cardboard tubes and other waste material like packing paper, dryer lint, leftover bits of candles, and sawdust. This is a little ramming tool to push that material into the tubes. Designed for…
Wydruk około 3,09 €–3,77 € nettoWstępna wycena jednego wariantu
The one spool ring to rule them all! Bambu Lab doesn't recommend using filaments with cardboard spools with the AMS, as they can produce dust and block the rollers or the cardboard edges could fray, causing issues. By snapping this model…
The Polymaker spool adapter is designed to help your cardboard spools print more consistently by reducing friction and creating a structured rolling surface. The spool adapter clips around the face of the Polymaker cardboard spool and is…
Update 11 Jul 2023: It has been a year since I designed the PMS (Poop Management System) for Bambu Lab printers. So many things have changed and so much development in the way we approach slicing & printing. I am doing an update and also…
This adapter system wraps the edges of an ESUN 1kg 199x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ESUN nameplate for…
UPDATE!: I have revised the original Overture Spool Adapter based on feedback and experience after creating my Polymaker Spool Adapter. Version 2 of the spool adapter works just like the original except, I have added the small retention…
A compact and ergonomic 3D printable box opener designed for safely cutting cardboard boxes and shipping packages without damaging the contents. This 3D printable box opener is designed for everyday use in workshops, warehouses, offices,…
Use Arachne wall generator or your walls till be too thin and split. If you have issues with the ring being too tight on the spool, you should print the test print I included to measure the hole and contour accuracy of your…
This set it is the best collection of pieces I could find for makedo style cardboard construction tools for kids. I tested about 5 different saws, punches, keys and screws and these are my favorites. This brings together a chain of…
This adapter system wraps the edges of an OVERTURE 1kg 199x66mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable OVERTURE…
This adapter system wraps the edges of an ELEGOO 1kg 199x64mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ELEGOO nameplate…
Hey, Gridfinity is great, but for big projects, they take a long time to print and use quite a bit of filament.I designed these bins that use cardboard boxes to reduce both. Cereal boxes, frozen pizza boxes, Tetra Pak, and the likes work…
I wasn't liking any of the spool adaptors I was finding for the AMS so I designed my own. This one snaps securely to the edge of the spool. It can easily be taken on and off the spool. I have tested it with Polymaker and Overture spools.
Instructional video is included in the download files. Remove as much of the glue in the first stage of the process. This will make sliding the adapter into the cardboard core easier. Make sure not to jolt or shake the bare filament or…
UPDATE: Version 2.1 of this spool adapter has been uploaded. Slight correction to V2 on the retention tabs. This is a Bambu Lab AMS adapted for Polymaker cardboard spools. There is one registration pin to avoid slippage. I honestly do not…
Snap on rings for cardboard PM spools to aid in flange and slip roller style filament holders.
NOTICE: INLAND PLA+ spools have recently been reported by several users to be slightly larger. If your spool diameter is greater than 199mm please scale the models to 100.6% and leave a comment if this works for you. I don't have a…
Other polymaker cardboard spool adapters out there have the following problems: 1. They fall off 2. They slip during AMS rewinding 3. They are so large that they require you to leave the AMS lid propped open so that they don't rub on the…
This adapter system wraps the edges of a POLYMAKER 1kg cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Notes: I've tested with several POLYMAKER…
Spulenadapter für Jayo & Sunlu Pappspulen, um diese im AMS von Bambulab zu nutzen. Dieser Adapter läuft in meinem AMS bereits seit mehreren Spulen problemlos und lässt sich in etwa 15 Minuten pro Seite (inklusive Kalibrierung) drucken.…
This is just the rim part without side support. Added a small bevel on the corners to avoid needing to scrape any squish from the first layer. The fit is supposed to be quite tight so no glue is needed and they will not slip. It will not…
What to do when you're sitting at home, well to me that answer is clear. I want to build stuff! And when it comes to building stuff at home I love to use cardboard or 3D printing, so why not both. So I wanted to create a modular system to…
Added some tabs for the top 2 and bottom 2 holes of the Polymaker spool.
Designed to fit the ABS Polymaker 3D Cardboard Rolls snaps in place, its designed to fit snug and little teeth to help it in place with added teeth to help grip the wheels inside the AMS just print 2 of them and your good to go! Should…
This adapter system wraps the edges of a CREALITY HYPER SERIES 1kg 199x64mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable…
The ELEGOO filament spools are made of pressed cardboard, which is abrasive, has low friction, and creates a lot of dust when printing, so I adapted the project that was created for Prusament refill filament to fit the disassembled ELEGOO…
eSun version for their cardboard spools. 0.2 layerheight 0.4 nozzle PLA/PETG (tested) some eSun cardboard spools have one side with a index hole…. so print 1 of eache file… Or just print all without the index tab
This adapter system wraps the edges of a ANYCUBIC 1kg 199x66mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ANYCUBIC…
This is a remix of an existing model. Unfortunately I can't find the model anymore. Instructions The holes in the black parts are intended for short pieces of filament. They should hold the parts in position when gluing. UPDATE:…
pay attention If you use the adapter, the lid of the AMS can no longer be closed.
Simple cardboard connectors for your home fort building.
(deutsche Beschreibung: siehe unten) Update 2025/04/24 added an element for supporting the box bottom when long side panels are used - can be added even multiple times per side if necessary added a Version for 9mm (23/64 inch) thick…
Whether you process items in an Ecommerce setting or transfer items from one box to another or just want a box for your cat to play in these retainers will keep the box flaps out of your way! Print for one corner or all four, as many as…
The Ergonomic Cat Cardboard Scratcher Tool is designed for cutting cardboard strips approximately 33mm in width, perfect for creating custom cat scratchers that can be flipped and used a second time once worn down. The tool securely holds…
I absolutely love this original adapter, however it was so tight fitting that it made it VERY difficult to insert without greatly increasing the chance of ruining the loose filament spool. Scaling the model down (as suggested) works to…
Steering Wheel for Cardbox cars or where ever it might fit! thightening just be turning the knob down! Wheel is screwed down with a m6 Screw, the Knob with 2 M4x25er from each side.
Two simple models to make working with cardboard spools easier. Custom threads should be easy to print and provide plenty of tolerance for PLA or ABS prints. The spool clamp helps ensure cardboard spools don't come apart if the glue has…
Remixed the original cardboard spool adapter design to secure to the spool utilizing the holes using a press fit design. It is also clipless to allow for easier removal and should be appropriately sized to apply enough friction on the…
This adapter system wraps the edges of an ERYONE 1kg 196x62mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ERYONE nameplate…
Just a remix to make the AMS spool adapters work with Eryone cardboard spools.
a friend wanted a cardboard strip cutter to make cat scratchers, I found one here but it needed supports to be printed so I decided to modify (or rather redesign) it so it can be printed with no supports. This one requires a threaded…
We have heard your requests! We made a snap fit ring for our colorFabb cardboard spools. This was specifically made to prevent dust accumulation in the AMS module of the Bambu lab printer. Happy printing!
About A ground-up rebuild of the excellent Polymaker spool adapter with the following changes: Edge clips removed (These tend to damage spools and are also not needed since the adapter uses the locator pin to lock into place) The Center…
Cardboard carrying handle with outer and inner part. You can simply stick and/or glue it together. Simply press the outer part against the cardboard outside to see what needs to be cut out. 2 sizes available: 6/12mm Cardboard thickness…
The PolyMaker cardboard spools are great except for the friction. These spools were straining my printer and the filament always looked so tight between the spool and extruder. Some designs use bearings, but this seems like overkill and…
There are a lot of really great options out there for adapting cardboard spools to fit the Bambu AMS but this is my take on that. The main change is that this is specifically designed to fit over the cardboard Esun spools. Not meant for…
This device is designed to print without supports and be used to cut cardboard strips to make a device for cats to claw at and scratch. This devices requires a standard utility blade and works well with an M3*10, M3*12, or M3*14 screw. An…
Here is a cardboard spool RFID adapter for the CFS. Tested and used for more than 2000 hours without issue! This will work with all standard mifare 1k rfid tags. Currently tested and working according to the following: Polymaker…
This is an enhancment toolset for using cardboard screws. This set based on our own experience using our popular cardboard hand tool and also some user feedback I got. This additional cardboard toolset contains the following tools and…
with nice Pokemon Logo & Pokeball Design very sturdy reworked design symetric lid easy to print right size for your cards with sleeve → V2 with stronger sidewalls :-)
This is a improved hand tool for using cardboard screws designed by wyliebutler It is designed tp be printed flat lying on the printbed to have a layer orientation along the length of the tool. This makes it very robust compared to a tool…
Minor variation to make this stronger than original.
A revolutionary and highly practical solution to loose filament ends on cardboard spools. Unlike static clips, this Slidable Filament Lock features an innovative self-adjusting design that moves along the spool's factory holes. As your…
3D printable cardboard construction screws and handle. I printed the handle with supports. but didn't use any supports with the screws. Printed on a Sainsmart Ender 3 at 0.2mm layer height. It would be nice to have deeper threads but that…
