Liczymy pasujące modele…
Stronger version: https://www.printables.com/model/1220427-usb-c-lightning-dirt-remover-v2-container-included Tool for cleaning the usb-c connector from dirt. Lightning version:…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
Update 19-Nov-2024 : Added IL version Update 02-Apr-2024 : Added CZ version A removable trolley coin for EU/US/CA/AU/UK/CZ/PL/IL carts. This allows you to remove the coin after unlocking the trolley for your shopping. Although there are…
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Why hide your remotes? Keep them within reach in a beautiful holder stylized with the appearance of rope! 3 models to choose from! Dual - Holds remotes of all sizes with two compartments Short - Designed for smaller remotes (Firestick,…
Hi, this is the tick removal coin. Unfortunately, there are a lot of ticks in the area where I live, which is why I designed this tool. With these coins, you always have a tool at hand to help remove ticks. You simply push the coin over…
Also tested with other charging ports Inspired by the box openers
Replacement battery cover for the TCL Roku RC-AL5 remote control. This model appears to be dimensionally accurate but is a very difficult print. It requires supports at any orientation. If you have a successful print and fit, please let…
Rock Remote Holder Keep your space tidy with this rock-style remote holder , a decorative organizer that blends perfectly into your home while keeping your essentials within reach. 🪨 Designed to look like a natural stone, this model hides…
I live in Colorado, along a river, and the ticks endlessly appear on my dog, and occasionally on me. I saw the Prusa contest and knew that this would be perfect for it. Ender 3 bed can fit 32 Hole for a dog tag, or keychain. Small enough…
Simple Idea but big help! SINCE 2021 → I'm the original Inventor of this idea! Easy to print, ready for cleaning in 5 minutes. easy, safe*, reliabe and sustainable. Use PLA or PETG. Infill doesn't matter. Layer high 0.1. *Don't push to…
Battery Cover replacement for Roku Ultra remote model RC-EL3 Print horizontally with curve up, requires supports. This will reinforce the locking tab. Be careful when removing supports to not damage the bottom alignment tabs.
I made this Gyroid look organizing box for TV remotes. Recommended 3D printer's settings: Material: PLA Resolution: 150um Infill: 15-30% Feel free to make your own Gyroid TV remote box! Print instructions Ready to print for i3 MK3/S gcode…
Console tray based on zrides' center console design (thingiverse) with the following changes: removable divider radius added to all inner corners for easier dirt & dust removal outlets for usb charging cables added Printed for Tesla Model…
This is a non spatula style scraper. Simple, Small, but functional and requires much less filament than a spatula-shaped scraper.
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Pretty straight forward print for the most part. I used PETG since my garage can get hot in the summer, but there is no reason this can't be PLA if temperature is not an issue. Bit Rack - this is the back plate and needs no support Bit…
Some of my nozzles have lost their silicone sock, so I wanted a removal tool for it. This tool is available in both sizes, with and without silicone socks. The way to use this tool is to loosen the screw while pressing it against the…
This bracket was created to hold a Hormann HS1 type door remote. It can be screwed to the wall using 3.5mm wood screws. This should also work for other Hormann HS remotes such as the HS2, HS4 and HS5 although as I don't have any of these…
I wanted the trigger lock switch by Ondrashek for my Dyson Outsize, so I remixed it with crash720's trigger lock model to clip on and fit snuggly around the handle of the Outsize and be able to switch the trigger when required. I found…
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
I have several times accidentally hit the Netflix button while watching other things. So now this exists. This was designed for PETG, but PLA or any rigid filament will probably work too. This was NOT designed for flexible filaments as…
Remix of: https://www.thingiverse.com/thing:2808264
Este es un rediseño de un despolvillador de yerba mate basado en su modelo original. El objetivo de esta versión es mejorar la eficiencia del filtrado y la funcionalidad general del accesorio: 🧉 Mejoras principales: Distribución…
This design was inspired by… https://www.printables.com/model/239430 https://www.thingiverse.com/thing:3868476 I designed it to hold a Lasko fan remote, an astronaut star projector remote, and an LG TV remote. Plus, there is an additional…
This remix changes it to (mainly) a horizontal stand, which prevents it from rolling over on the table when trying to use it. The main use case is this: You're watching something on the TV You place the remote on the table, next to you…
With these parts you can close the Enclosed MMU3 top cover opening while allowing for easy removal of the MMU3 top cover. The sliding cover helps in controlling of the Core One enclosure temperature, but I also wanted to be able to easily…
I designed this for a friend who needed an adapter to fit his iPhone 12 pro on his birding scope. Shopping around these can be very expensive with one brand costing £180. Seems very expensive for a bit of plastic so 3D printing to the…
Loxone Remote Air for storage on the car sun visor. Fit to all standard car sun visor. (~20mm thick) It is recommended to use double-sided adhesive on one inner side so that it does not shake off from the awning when it is folded down.…
This wall mounted remote holder makes is easier to grab the remote, and keeps fingers away from the wall to avoid finger marking the wall. Printer: Ender 3 Pro Filament: PLA+ Temp: 225C Speed 150% Orientation: Vertical Support: None Print…
Wall mount basket iPhone 12 ProMax and remote Sber TV Корзина для настенного монтажа iPhone 12 ProMax и пульта дистанционного управления СберТВ.
simple print g code is for any ender like printer will print in 29mins double sided sticky strip to put wherever you want!!!!
This holder will save you your marriage. Now find your roku remote with an airtag!!! It is also a quick print. Use my settings and it will be done in 3 hours (petg)! Print Settings: Supports 15% infill recommend petg
I believe, that I created my usefull Removable Combination Butterfly Corner Code for everyone, who need connect a some stuff, like furniture, shelfs or some DIY projects. I tried to design a very minimalistic and simple design of my…
EN Honda Monkey seat removal without tool, simple and quick model what saves time when removing the saddle. Use the original bolt which is heated with a lighter and pressed into the print. Optional: You can still use glue, or a locking…
(pour le français, voir plus bas) Wall support for 2 dometic remote controllers. Max remote controllers size is 56x18mm. Use two 4mm screws to fix the support. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no…
This Star Rating Display is a simple and entertaining way to add a touch of fun to your space. It’s perfect for showcasing 5-star ratings in real life—whether for home, office, or customer feedback setups. The design features a sturdy…
This is a wall mounted Vizio TV remote holder. There is an inset on the wall side to place a command strip so the holder fits against the wall. I printed this at .4 layer height, 80mm/s, 10% infill. This holder is 90mm high by 60mm wide.…
CZ: Jde o náhradní držák dalkového ovladače pro osvětlení řady Eglo CONNECT s lehkou vůli pro snadnější manipulaci s ovladačem. Držák můžete umístit např. na postel bez nutnosti vrtání, či prostě jen tak postavit. Podpory nejsou potřeba.…
Non c'è molto da dire... per montarlo serve una vite M4x30 MATERIALE: ECO-SMART PRINTOLOGIST
Instead of using the standard filament holder on my Prusa Core one L, I use a Filament dryer and feed the filament directly from there into the printer via a Bowdentube. If the printer runs until the filament spool is empty, I have to…
I have four remotes so i made one holder for them Holder size: 186mm*32mm*28mm Sony tv remote size: 48mm*24mm Startsat remote size: 48mm*24mm Xiaomi remote size: 38mm*15mm LED remote size: 42mm*8mm I tried to attach the holder to the wall…
Add-on clips for the very sleek looking TV Remote Control Holder by designx-lab.com . The main reason I didn't give a five star rating during uploading my make was the fact that the remotes tend to slide out of the side of remote holder…
Caps for PET Hair Remover Roller Brush Cat & Dog
Printquality dosn't really matter, stronger with thiner layer height.
Designed in TinkerCAD to hold the remote for for the LED strip i have under my desk. Stuck to the wall with double sided tape. Provided gcode file is just to give a time estimate. Slicer Settings: 0.20 SPEED profile PLA Top Layers - 2…
EN | Remodeling timetable This school schedule is 100% re-arrangeable, you can take the pieces out at any time and straighten them according to the new arrangement of timetable without having to cross out or erase anything. Instructions…
Holds 3 USB items with enough room to actually fit 3 (unless one is a 90 degree offset as in my picture, then only 2). Designed with slightly looser tolerances than the original insets so it slides in and out a bit easier. Happy printing!
Holder for Trinocular Mircoscope Camera Remote. Microscope in Pictures: https://de.aliexpress.com/item/1005004036342281.html Since all of these $700 China microscopes have the same base, the model should be compatible with many microscopes.
Print without supports. Exactly as shown in the photos. Customizable via Fusion 360
Printed in PLA, 0.40 mm nozzle and 0.20 mm layer on Prusa MK4S, in upright position with support.
This remote holder is for the Haier AC model ESA3089. The factory remote is poorly designed in that the 3 middle buttons feel the same when you're correctly holding the remote or holding it backwards (pointing it towards yourself). This…
Nullbits has a 6 switch macropad with options for encoder and OLED ( 128 x 32 ). The scramble PCB layout however locates the I2C ( for the OLED ) through-hole vias in a location that if populated directly (i.e mounted onto PCBA ) will…
A wall mount for the remote control of the Teufel Musicstation. The mount can either be screwed using a 3x20mm countersunk screw, or glued with adhesive.
Halterung für die Fernbedienung der Ankerwinsch (hier: Lewmar Pro Series 1000)
Wall holder for Nexa remote control PBT-707. PETG recommended. Do not print in brittle material such as PLA because the side clips will break when inserting the remote. I also recommend printing the two parts dovetailed version in order…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
Not 100% accurate (scale and shape) because the models were made from photos. PRINTING MATERIAL AND POSITION IS IMPORTANT! I printed them in ABS. PLA may not be the best choice, my second choice beside ABS would be PETG or something…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. Prints without supports, but you will…
A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction. *** Magnets go inside the chute on the inside,…
I needed an easy way to test my support settings when it comes to actually removing the supports from your prints. Especially when they are difficult to remove. This test print is primarily for you to test the different values / results…
This was inspired by the original Laundry Detergent Cup Drain and modeled from scratch in Fusion 360. As is, it fits the new Tide bottle, but the model is fully parametric and therefore can be adjusted to fit other detergent brands. It…
Tired of losing your remotes or dealing with cluttered surfaces? This remote control holder is the stylish and functional solution you’ve been looking for. Designed with versatility in mind, this sleek organizer isn’t just for remotes,…
Prints with no Support Fits on Prusa Mini
All my designs on Printables.com are free to download for personal use, but if you like my work please consider to buy me a coffee =) 4-Door JEEP Wrangler with removable Hardtop If you have any questions, let me know in the comments. You…
Pause mid-print for color change and magnet insertion. 4mm diameter, 2mm height magnets. Magnets and colors are optional - tool works just by printing as is. Recommended settings: 0.2mm nozzle 4-5 walls high infill Use the smallest layer…
When the Inserts fits tight in the Honeycomb Wall, they are difficult to remove for replacing to another location. I tried with a screwdriver, but the PLA gets deformed. So I designed a removal tool. Stick the tool in the inner hex from…
organiser with grid pattern and removable separator 2024-05-18 update · uploaded a simple lid, to meet a request photos show printed in black matte pla and brick red petg-cf 0.20mm layer height 10% adaptive cubic infill dimensions > x:…
Simple but functionally designed holder for remote controls and other stuff that would otherwise be lying around somewhere. Scale it if you want. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my…
BOM: Printed with ROSA3D Starter PLA Black Ditch the dangerous metal spatulas! This 3D printable plastic scraper is the perfect tool for safely popping stubborn prints off your build plate without risking deep scratches on your PEI,…
Remote holder for 3 remotes, with attachable inserts for multi‑colour printing Dimensions ⬝ mm ▪ Remote holder - x:120 ⬝ y:66 ⬝ z:62 Print ⬝ Profile ▪ 0.40mm nozzle ▪ 0.20mm layer height ▪ 15% gyroid infill ▪ Outer walls slowed for print…
Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…
Removable bin, trash can, or storage for whatever you like, that clips onto the edge of your desk. Simply slides up off the bracket when it's time to be emptied. Following common feedback from people, this is the third version of this…
The original model had supports within the model data. I removed them and cleaned up the surface afterwards, so you can generate your own support by your slicer in the way you think the supports work best. Don't try to print it without…
Stronger version: https://www.printables.com/model/1220427-usb-c-lightning-dirt-remover-v2-container-included Very fast printing Sometimes when the iPhone charges poorly, it may just be dirt in the connector. This cleaning tool has helped…
Tick removal tool 3 different sizes Print in place and fast 100% infill PLA, PETG
Wall Mounted Voronoi Remote Holder. Options: Single, command strip mounted. Single, screw mounted. Triple, command strip mounted. Triple screw mounted.
This is still a bit of a work in progress so im open to feedback, but these snap into the gridfinity plain bins I made. Used a brother p touch label printer to make some fancy labels, I put the templates for those in a zip file. Label…
Print in PLA No supports needed Just glue Face and Tray together Hold at the printer by 10x2 magnets Detect thin walls should be enabled if printed with a linewidth greater than 0.4mm
The Gura Gura no Mi is a Paramecia-type Devil Fruit which allows the user to create vibrations, or "quakes", making the user a Tremor Human. It was eaten by Edward Newgate, but upon his death, its power was stolen by Marshall D. Teach. A…
Attention: Please measure the width of the frame (see picture). The width must be approx. 40mm. Apparently there are deviations in the width of some printers either due to changes or quality problems at Creality! If the width is correct…
remote holder update · added STLs with different sized inserts for fit and color photos show printed in matte black pla and matte beige pla 0.20mm layer height 15% adaptive cubic no brims or supports note > this model comes in two plates,…
It's a easy print. I recommend printing with 3 perimeters to avoid infill in the walls and your printer getting stressed :) It's your time and choice, so up to you to choose the layer height.
Another Removal Tool (Bed Scraper) A simple and practical 3D printed bed scraper designed to help you safely remove finished prints from your printer bed without damaging the surface or your models. This tool is lightweight, comfortable…
:IMPORTANT THREAD / BOLT INFO: I had to scale the clamp bolts up in size about 1-2% and the bolts for the base about 3-5%. That's what worked for me and FOR MY LIKING - everybody's setup is different, your mileage will vary, everything…
In Prusaslicer set Vertical sheel perimeter to 5 to get more powerfull tool. Print orientation
https://paypal.me/radicalreel Remix of MerganMcFergan's Gizo the spider. I'm not a fan of rafts so i made a Brim which is only partially conneced. I added slight support too source: www.thingiverse.com/thing:5044727
Need more bathroom storage without cluttering your sink counter? This removable cabinet door organizer turns unused space inside your vanity into convenient extra storage. It’s perfect for makeup, skincare, cosmetics, cotton pads, hair…
I designed and tested the insert with the German Sky Team version. It seems to be identical in size with the other available versions. Insert dimensions: 247mm * 177mm * 19mm I created different versions for larger and smaller printbeds.…
Mirrored Element
PTFE Tube Remover Introducing our small PTFE Tube Remover. Engineered for effortless use, this compact device ensures a easy way to remove your PTFE tubes with its user-friendly design. *Print settings: 0.1mm layer height BENEFITS: Fast…
Remote holder for 2 remotes, with attachable inserts for multi‑colour printing Dimensions ⬝ mm ▪ Remote holder - x:86 ⬝ y:66 ⬝ z:62 Print ⬝ Profile ▪ 0.40mm nozzle ▪ 0.20mm layer height ▪ 15% gyroid infill ▪ Outer walls slowed for print…
This tool is used to remove the PTFE tube from both ends of the Bambu Lab filament buffer or AMS hub. *Edit - I added a hole for a magnet to hang it on the back for storage. Thanks to djwhouse for the idea. There are options for circular…
Just slide the tip under the green cap and lift - your strawberry is ready to eat in seconds. Perfect for kids helping in the kitchen or for prepping freshly picked berries. https://www.youtube.com/shorts/5aldie1FpRs
As the filament is loading and unloading this cause the PTFE tubing to move and add a ever so slight pull upwards on the ring inside the fitting, this causes it to get stuck on to the tubing, making the standard method of removing the…
Nice rounded caddy for remotes and other stuff. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360…
People copying my model from Thingiverse and making out it's their own design, so I've added it here on Printables…. This is the second version of this project with a "fancier" bin and also the bin part is larger than the original. Since…
![Despolvillador yerba mate [v3.1] (Dust yerba mate remover)](https://media.printables.com/media/prints/433840a4-f2a8-4a84-85ac-b5686cb7ee4a/images/9974806_18a6b8ac-1630-4f21-a1cb-28191575e24b_6c4569ef-7484-4702-a782-9de900a50494/img_20250608_201121656_portrait.jpg)
