3421 modeli
Dimensions Length Width Height 1:10,000 scale 160mm 103mm 56mm Version Appearances Ship Stand Imperial I-class A New Hope, Rogue One print_sw_isd_ISD_I.stl print_sw_isd_stand_ISD_I.stl Imperial II-class The Empire Strikes Back, Return Of…
A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.
Link to improved version A replica of an Imperial I-class Star Destroyer as seen in A New Hope and Rogue One. Print instructions Scale is at 1:1,000. Unless you want a 1.6m long print, you should probably scale it down first. I printed…
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…
Kumihimo, anyone? Kumihimo is a Japanese braiding technique, which can be made with a Marudai or a Kumihimo Disk, like this one. I'm making Kumihimo braids for several years now and I tried lots of different disks - but alsways the same…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
No supports Maximum details Model in size 1, 0.75 a 0.5 scale.
The bronze dragon was cast in 1842, in front of Duyet Thi Duong gate, Hue Imperial Citadel.
Hello ! Wellcome to my little office with Prusa MINI +. I made industrial lamp with concrete base, retro bulb and soft pad made of recycled rubber. O.10 DETAIL Prusament PLA No supports 15% We will need: Concrete (fine concrete with small…
The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…
EDIT 1: (Featured in the Prusa YouTube video about 3MF files!) EDIT 2: (Also featured in Weekly 3D Prints #47!!!) This serves as a sequel to my recently-published Castle Tower. I began an introductory course with Autodesk Maya and decided…
Easy to print picture that shows surprise under light! Printing instructions - use white filament! Use either 100% infill or many walls/perimeters Recommended layer height is 0.12 however if you want the most detailed print, go lower.…
This is an Imperial Insignia Coaster that is stackable. I also have a Rebel one https://www.prusaprinters.org/prints/8804-rebel-insignia-star-wars-coaster-stackable Print instructions If you print the GCode F1 is Black and F2 is White.
Deteriorated Bone Material or a Pile of River Rocks. Figured this could be used in a Gamefold or the ilk.
A set of 10 coasters with a support rack, with the imperial crest from starwars. You might need supports for the rack (for the lettering on the front and the imperial crests on both sides). For the coasters I used 30% infill with…
A FC Bayern München Coaster for multi-material printers (there's also an .stl for single color). Just take your colors and go for it. It's designed with a bottom layer if someone want to use a flexible filament (I've not testet it until…
Filament Hinge Tutorial Overview Hinge pins can be of many materials: metal rod, wooden rod, bolt & nut, or a piece of filament. The filament hinge is sturdy, costs nothing, and is fairly easy to construct. I have used this method with…
Was downscaled from N. The roof is an original design.
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
Dust collection is a difficult challenge with any bandsaw. Mine is a King Industrial KC-1433FXR and came with a very inefficient and essentially useless dust collection solution so I came up with this 2 part dust collection duct that is…
Apple Fruit Fly Trap Fill ¼ - ⅓ full with apple cider vinegar and close the top. Discard after extended use, do not drink fruit fly filled apple cider vinegar. Printing Instructions Supports Required. Timelapse
Prints well large or small -- if you have dry filament you can go with a larger nozzle, as there isn't too much textural detail. Latest version adds seam painting and fuzzy skin where they're supposed to be fuzzy. When large, textured…
I love the Industrial phone stand model that @josh3D created. I wanted to use it on my phone, but the phone was too large. So I increased the width of the base and also extended the back up 20mm. While I was at it I created a Voronoi…
I like the MR V4 a lot. But the way I store my filament it isn't always easy to see the label on the side of the spool. That is why I remixed this with the material name on the clip. I have added the materials that I have or plan on…
This is an industrial handle that works best in pairs. It is designed to be mounted on a vertical surface. With the 45 degree angle, it gives your hands a natural position for carrying a heavy fixture. In my case I use it for Inspection…
This is a funny Halloween-themed version of the popular motivational phrase “Live, Laugh, Love” that is commonly found as signs and such in home decor – put those away and make these “LIVED LAUGHED LOVED” gravestones for Halloween!…
Little known fact: I bought my first 3D printer so that I can print leather embossing stamps. This actually works pretty well if you are interested in it yourself. So to go back to my roots for a bit – and fitting with the Catch-All Trays…
Recommendation print it with 0.1 mm layer height print the palette and the mainBody in one piece and do color change print the text separate and glue it on it doesn't matter on material
Remix of Yuliya Myxa's Empire Coaster in which I re-meshed (TinkerCAD did not like the previous mesh), resized to a 97mm outer diameter, and added the hole for the ornament. If you want, you can scale the ornament up or down; scaling down…
You can use the height gauge to measure and keep track of your settings on any piece of equipment in your shop. Use the ruler in the center of the gauge to lock in a measurement and then setup all your equipment to match the height or…
Measuring tool for wood screws using the imperial system (inch). Measures diameters from #0 to #16. One end of the ruler is chamfered for measuring flat head screws. and the other end is square for all other types. Print with a 0.4 mm…
Friendship Bracelet Wheel 7-colors Here is a tutorial to make the bracelet (not mine video): Feel free to like, download and follow. If you want check my other models. Happy Modeling and Printing!!!
This is a remix of the Player Dashboard by Farlei. It is has a larger card space to allow for sleeved (103mmx128mm) cards and a slot on the side for Condition Damage or Strain tokens. Printed with PLA Layer height: .15 Perimeters: 3…
Coaster with UFC logo - not necessary multimaterial. First time i made mistake - i made only 6 sides polygon. I added new version with 8 sides - repair file. Other coasters on my profile. Printed in PETG because temperature resistance.…
This is an industrial style handle for your drawers and cabinets. It prints in on the large face without any support. I reccomend unsing at least 3 perimeters and 30% infill for the reqired strength. I included a parametric F3D file, so…
Following a suggestion from a maker that needed drilling depth stops for Imperial drilling bits, I reused the the Drilling depth stop (Metric) model I created and adapted my design to the main sizes used: 1/8", 3/16", 1/4", 5/16", 3/8",…
/!\ This is a concept, work in progres /!\ Edit 9/03/2026: V2 available here: https://www.printables.com/model/1632023-v2-multi-material-kept-simple By printing this set of part and adding the special toolchange Gcode in your slicer you…
The housing with lid is part of the Ambilight Monitor project. The case was printed with PLA. The following components are also required for the Ambilight: Arduino Nano Power supply 5V 2A ws2812b 88 LEDs (32 Top, 19 Left, 19 Right, 18…
Folding hole gauge with metric and imperial measurements. Metric goes from 20mm to 5mm. Imperial goes from 1-inch to ¼-inch. Use supports (it hardly uses any). I tried to avoid needing them, but I didn't like any of my solutions for…
Creating wings in FreeCad and PrusaSlicer, optimized for single perimeter printing. I made some video tutorials, how I create my RC-airplane wings. I do the CAD-part in FreeCad, a free, opensource CAD software. The gluing surfaces are…
Die Lehre eignet sich gut, um größere Radien von Modellen oder Skizzen abzunehmen, wenn kein vollständiger für eine Messung mit einem anderen Gerät vorhanden ist. Das Modell ist aus PETG und mit MMU3 gedruckt. Es ist damit ein wenig…
A door for Fantasy Flight's Imperial Assault board game, set in the Star Wars universe. You can slide the game's cardboard door token in this model's slot and use it in your game. There is also a multi-part version that allows one to…
Rescaled holder for Pixi books with more cutouts to save material. Fits the small 10x10cm booklets.
Printed without support with cylindrical pins (3mm diameter, 14mm length) you can connect multiple of these units together. CAD Model…
Scaled from real structure found on the internet to 1:220 (single fan cooling tower). Added some pipes and side stairs from photos on the internet. The provided gcode is added for print time estimation. It printed very good apart from the…
Industrial Hercules DJ Knob Set Set of 3 Knobs for the Hercules DJ Board.
Oxo, made an awesome spatula that was perfect for use with stand mixers (notably KitchenAid), but has since dropped it in favor of a new design which is terrible. The old version is impossible to find (many have tried), so I took on the…
A easy to print and useful manipulative model to aid teachers teach trig concept. It is colorful and easy to read. Printed in three levels 1) for angles 2) for base (allows angle measurement to show through and 3) shows the two (2)…
Here you can see my creation of a lamp made of 2 different materials. A wine glass inspired me here. Once an opaque material (Prusament Galaxy Black) and once made of a transparent material (Prusament PVB smoky black). I think it has…
This project includes all files necessary to reproduce Plate 1 of the TaTaBook "Geology". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/XmWKdw Designed by Trnka, n.o:…
This model is based on the entry 6cgr from the protein data bank (PDB), presented in this publication: Dai, X., & Zhou, Z. H. (2018). Structure of the herpes simplex virus 1 capsid with associated tegument protein complexes. Science , 360…
Just a goofy little thing I did in blender using sculpt mode.
NOTE: Files must be split to reveal the numbers. These are a multi material version of numbered miniature base markers I made to use with printed miniatures for the board game Gloomhaven. I printed them in white to represent the standard…
25mm industrial bases, that fit my Miniature Painting Handle and Base Set Miniature Painting Handle and Base Set https://www.thingiverse.com/thing:6247736 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes…
Egg for darning socks, which can be opened into two screwable parts and contains small parts essential for sewing. Material used: PLA CRYSTAL. Only the thimble is in TPU.
Make your own This is a remote controller holder with holes to save material. The advantage of 3D printing is that you can make something exclusive to yourself. So, you can remix this model and make it in the perfect size for your remote…
Vhodné pro tisk na MMU, ale da se vytisknout treba i jenom zakladni klavesa s embosovaným logem.
Compatible with refills with inner diameter of 100mm and width 60mm (eg. SmartMaterial). Press-fit installation - There are two holes to install screw inserts, but they don't match the holes in the spool sides. Print in PETG - Settings…
Remixed top half of Moyina FT232 USB to TTL Adapter, USB to Serial Converter Case by @scorf and added 3d text that was inspired by USB to FTDI Adapter Case - with pin labels by @MyStoopidStuff The text is “upside down” but just right for…
I printed a number of the coasters and wanted a holder. This was created by incorporating a coaster into the tube.
Follow the Replacement instructions to replace the metric depth stop. Printed in Atomic Carbon PETG PRO .
This cup can be used for easy scooping and measuring liquid or powdery materials, such as washing powder or fabric condioner. Or anything else that crosses your mind! It is easy and quick to print.
1kg Master spool refill coils Filament coils with the dimensions: 2x Inner hole 90mm 3x Width 56mm 3x Width 58mm Spool diameter 200mm Easy install Label Material: ABS, PLA, PLA+ & PETG Label Colour: Blue, Black, White, Green, Red, Silver,…
3D Printing Quick Start Tutorial When you first get a 3d printer of your own or start using one at a makerspace, it's easy to find many incredible 3d models to print. However, at some point, I contend that everyone needs to learn to…
UPDATE: this is the new model with all error fixes, more reinforcement and a base for stand https://www.printables.com/model/717400-owl-model-from-the-blender-tutorial This is my first 3D model made from scratch. I currently can't print…
multi-color printing - transparent/color/transparent. Final transparent layer bridges the colored inner layers, so both sides of the print are smooth. ** vícebarevný tisk - průhledný/barevný/průhledný. Finální průhledná vrstva přemosťuje…
Prusa Enclosure is super, but I don't like the filament guidance in the long tube directly into the extruder because of the color change and the end of the spool. I tried this -…
This model is based on the entry 7r5k from the protein data bank (PDB), presented in this publication: Mosalaganti, S., Obarska-Kosinska, A., Siggel, M., Taniguchi, R., Turoňová, B., Zimmerli, C. E., ... & Beck, M. (2022). AI-based…
second attempt at an art nouveau earring, litophane version ** druhý pokus o secesní náušnici, litophan verze
The unit is mm With the prusa mini printer, make borderless printing.
This project includes all files necessary to reproduce Plate 7 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/FEFoew Designed by…
This project includes all files necessary to reproduce Plate 2 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/kMS8-A Designed by…
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables. Originally the ZIP-tie pad was flat, but it was way too easy to break it off. Then I changed to this triangular-ish…
Are you tired of rummaging through your gym bag to find what you need? I was! To keep everything tidy, I got some smaller bags for different items, and then realized I could design and 3D print custom tags to identify each one. These tags…
PL: Niniejsze repozytorium zawiera zbiór 40 modeli testowych zoptymalizowanych pod kątem różnych rodzajów termoplastów. Struktura została podzielona na 9 grup tematycznych: od podstawowych polimerów (PLA/PETG), przez materiały…
EN: Tomas Bata Memorial in Zlin - 1:200 scale kit - contains a slot for two AAA batteries including a mini switch and LED lighting. Recommended printing parameters: - PETG filament (or PLA) - layer height 0.2mm (including the first layer)…
Compliment your rugged PC build with textured fan side clips. I used silk PLA to give a metalic effect. I have included models for 120mm and 140mm fans. Printing I used 0.15mm layers for a clean texture. 0.20mm would look similar and save…
You still need 2 angle profiles 200 mm x 20 mm x 1 mm made of stainless steel. The thread in the cap may need to be recut. New may 2026: base for the top step Man braucht noch 2 Winkelprofile 200 mm x 20 mm x 1 mm aus Edelstahl. Das…
A simple organizer to store various laserable material samples from trotec
I kept forgetting what I had loaded and the printer is in another room so I made this to remind me what fiaments are loaded Set each extruder to match the numbers on the squares and you will have a colour swatch
A remix of the model Filament sample with box from Zahg . If you need the case for the samples, in the original model includes a great one. Direct downloadlinks for case : box_ top _ pla _v2.stl , box_ top _ petg _v2.stl , box_ top…
Author: Cipis https://www.prusaprinters.org/social/18/prints 2-color Remix for multi-material printers. Print takes roughly 2 hours and 40 minutes at 200 µm layer height with 2 materials (Ext. 1 – Blue, Ext. 2 – Silver) . Original model:…
All printable parts for your Original Prusa MMU2S Unit Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide.…
The multi-material Prusa MMU3 test objects are useful to quickly test the reliability of the material changes during printing. These simple objects can be printed using different materials and colors, allowing users to test how well the…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
The Imperial Star Destroyer from Star Wars in kit card form. One of the most iconic ships in the Star Wars universe available to print and assemble. Contains 23 pieces that fit together to form this amazing ship.
This is my take on my own award winning Flexi Sloth design as a multi material print. There is a pre-painted .3mf file and an .stl file. I also made a pre sliced print file for MK3S+ with an MMU. I will add a file of only the face so you…
Want to reuse toys you already have in a new way. Why not challenge your fantasy by making gigantic bridges and ramps with wooden trains (like Brio or IKEA) with help of simple Duplo bricks. These adapters will make this happen! I got…
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
Author: Cipis https://www.prusaprinters.org/social/18/prints 3-color remix Remix for multi-material printers. Print takes roughly 3 hours and 40 minutes at 200 µm layer height with 3 materials (Ext. 1 – Green, Ext. 2 – Blue, Ext. 3 –…
Notice! This version is obsolete. An updated version compatible with both stock and all Hydra versions is available here: https://www.printables.com/model/1633611-high-capacity-ams-silica-dry-box About This is only compatible with Hydra…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
This is an anatomically correct human heart. It is created as a multi material version: The heart's Ateries, Atrium, Valve, Ventricle, Papillary and Veins are a seperate file, so you can print a fancy multicolor heart ;) The Ventricle has…
Remix for multi-material printers. Original model by Alsamen: https://www.thingiverse.com/thing:3824261
More of my Star Wars kit cards are available at: Millennium Falcon Kit Card Tie Interceptor Kit Card Landspeeder Kit Card Also check out the awesome Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
🚀 MMX OG — Serial Number Registration Now Open! We’re officially opening serial number requests for the MMX OG (4-Color) Multi-Material Extruder . If you’ve built one and made it work — this is your moment to make it official. 🔩🔥 Each…
