Liczymy pasujące modele…
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
I am not the original creator. If you find any errors im my post please notify me. If you are the origina creator massage me and i will take it down if you would like. original post https://www.thingiverse.com/thing:1819242/files
This is a 3D printed model of a generic Corvette Class Light Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Phobos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with…
2D model of a cat , easy to adjust to your printer size
This is my take on the Morrigan Class Patrol Destroyer from the MCRN. It is done to scale to my Rocinante model. The model is once again kit so no glue needed. It has two features: Retractable PDCs - the same as on the Roci. Retractable…
Hi here you will find a garden irrigation system like the manufacturer gardena has. Free under the motto "Why buy, when you can print it" ;-) I have designed it modularly and as GlueEdition so that you can connect different ground…
Drip irrigation ring for containerized plants. Two sizes are provided - 100 mm and 120 mm. The Openscad file is also available for customization - you can vary the diameter of the ring, diameter of orifices, and the number of…
This is a 3D printed model of a Orion Class Heavy Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Deimos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with torpedos -…
Title: 3D Root Watering Spike 15cm - 360° Irrigation System Description: An innovative and effective solution for indoor and outdoor plant care! This 15cm watering spike is designed to deliver water directly to the root zone, preventing…
Lampshade with holder for E14 lamp socket. Printing: The lampshade was printed with one perimeter (per layer) only, but not in vase mode. The two test versions of lampshade holder were printed in vase mode. For E14 socket a negative…
Model from Halo for the UNSC Heavy Frigate ship. Comes with original model, with a pre-split files for a 400mm model.
Morrigan Rock Bouncer 1:8 Scale: __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non…
Introducing the Geometric Origami Crane Wall Art 3D File, a meticulously crafted masterpiece designed to elevate any space with its elegance and sophistication. This stunning piece is composed of six intricately designed components: Head:…
************************************************************************************************** These transmissions are intended for use with “Thumper” and “Morrigan” 1:8 scale models. Thumper -…
If you like the model, give it a ❤ and download it, thanks- Pokud se vám model líbí, dejte mu ❤ a stáhněte si ho, díky For better results, I recommend adding supports
I remixed this beautiful model to hang as a decoration. It´s stable and balanced. It can be hanged separately or in a row. I printed without support and without infill. Add the brim! It is a remix of this model:…
A very nice and traficional pot or planter for your plants. Easy to print in 2 or 3 layered vase mode settings. Prefered print material - PLA Happy printing!
The cap is designed to fit PET bottles (with thread PCO1881 which fit all bottles I could find in my household) and turn the bottle into a water irrigation system for e.g. flowers. The cap is printed without support, but a 0,2 mm surface…
2D model of a wolf , easy to adjust to your printer size
This is a 3D printed version of the Amun Ra Class STEALTH Frigate from the show the Expanse. The model is not the most accurate but is still not bad. Assembly does not require a single drop of glue as it fits all together like a kit. The…
You definitely need to print these in ABS or another plastic that holds up well outside. The valve needs 3 rings to function properly without it, and will leak.
Summary This is a 3D-printable flasher pattern based on the work of Shannon Zirbel, Robert Lang, and several others. It demonstrates the ability of the flasher pattern to go from a flat state to a much more compact, folded state, all…
!!!!!! It has come to my attention that not all 40T gears are the same. Some have a much bigger shoulder and are much thicker. I got mine on Amazon. link below. The wrong 40T has an option of a shaft up to 15mm, The cheaper version only…
This is a 5.5-inch diameter irrigation ring designed to be used with 0.25-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…
Remixed version of a pretty flower/plant pot modified for thicker walls.
This is a drip head for my garden irrigation system, based on the Gardena Micro-Drip hose. I use it to irrigate my tomatoes and chillies with the water from my rain barrel. I have put together a short video of my irrigation system:…
No support needed.
This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip the water into a plant container over a period of time. IMPORTANT: Cut a small washer out of craft foam to help seal the…
https://youtube.com/shorts/F93YYlrKhWg?feature=share Could require a brim to ensure it sticks to the buildplate. Also the slicer may have some difficulty to print the model at different scales (empty layers etc..) However the stl as…
UPDATED! these have all been made stiffer! Also please note that for the illustrative purposes the kirigami frame a brace are depicted upside-down. After running the LDO Kirigami Bed Kit and loving it for over a year I found only one…
Basics A practical tool to form chocolate into balls, base to create the Brazilian brigadeiro cake. Available in 3 sizes Number 4: @30 mm, about 16 grams / 0.56 oz Number 5: @25mm, about 12 grams / 0.42 oz Number 6: @18mm, about 8 grams /…
Update 23-09-2024: I've made a version 2 of the box. It prints faster, is stonger, no supports with printing, PiP lids and my opinion: it's even more beautifull… You can find V2 HERE This is the sequel to my earlier Luxurious Storage Box…
Compatible with: V0 Kirigami Bed Salad Fork / Tri-Zero / Pandora's Box anything with an extrusion to attach it to Supports the Rainbow Barf Logo LED or a Neopixel Mini Button BOM Item Qty. M3x5x4 Heatset Insert 2 M3 Hex Nut 2 M3x6 BHCS 4…
16 mm irrigation pipe to gardena / garden hose adapter that screws onto ¾" threads. Needs a rubber seal and O-Ring that can be found in my other models or bought from your local hardware store. Might need a pipe clamp on the irrigation…
Be sure to visit and welcome the newest member of the family: a heart-shaped unfolding box. (It's almost Valentine's Day) Take also a look at the sequel: Solid storage box with origami folding lids. updates moved to bottom of page.…
An origami inspired chopstick rest. Model is able to be printed without any supports by printing on the back tail.
2D model of a Rabbit , easy to adjust to your printer size
This is my own printed version of the open origami umbrella. It can also be a fidget toy to play on your desk and a perfect test for a great first layer of your printer!!! Print instructions and Settings I include .stl , .3mf and .gcode…
ORIGAMI CAT 2 2D Model easy to adjust to you printer size you can choose Z size in your slicer
Do you know this problem? Seems like mother earth swallows the pipe pegs of your garden irrigation system? Or they simply break after some time? Here's the solution! These pegs fit standard micro drip irrigation systems such as Gardena or…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Sprigatito, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
Remix of Geometric Origami Planter: non vase mode and with drainage holes.
I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 2 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…
A model of the german Sachsen class frigates. I remember doing this one quite well because I started the modelling process after a silvester party at new year 2020 while I was listening to the voice of a drunken friend over teamspeak xD…
The 2025 Christmas Tree is out! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Emerald Green & Gold The…
I found someone that uploaded the Sword-Class frigate from Warhammer, so I once again, put it through Meshmixer, then fixed some parts using Blender. Category: Vehicles
Summary This is a 3D-printable Yoshimura bloom pattern, specifically a Y-6.2 pattern (meaning it has six-fold symmetry and two rings extend out from the center). The membranes between the panels are designed to accommodate the folding…
Hello, I have a claymore watering mine for gardeners. Fantastic model for watering plants. Just pour water inside and it will gradually hydrate your bouquet or plant! I used PLA/PETG Basic as the material yes need to use supports If you…
2D model of a lion , easy to adjust to your printer size
A set of three christmas ornaments, inspired by origami shapes. Ribbon Deer Pidgeon Print settings 0.2 layer height 2 shells 15-20% infill 5 top / 4 bottom layers no supports no raft
Drip/micro-spray splitter connecting to Gardena hose pipe. The requirement was to water bonsai trees, using micro-spray heads on flexible pipes, from a ten-way splitter connected to a hosepipe with Gardena fittings. The final design does…
This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…
Vase prints with 18.2mm bottom for thread. If collar lip of the bottle doesn't seal with rim (water running out the tip because air can enter the bottle at the thread) - use some PTFE seal tape, or Vaseline.
16 mm irrigation pipe to gardena / garden hose adapter that screws in ¾" threads. Needs a rubber seal that can be found in my other models or bought from your local hardware store. Might need a pipe clamp on the irrigation pipe end…
I designed components for my greenhouse irrigation system. It fits regular 1/2" (13 mm) hose and 4.6 mm hose (tested on Gardena irrigation 4.6 mm hose). Dripper endpoints are adjustable so them allow to set the desired amount of water for…
I thought of making the first layer test of the print bed fun, avoiding material waste and turning it into a playful object. So, why not print a sheet with guidelines for folding it into an airplane? The plastic makes the airplane more…
Tips Use a zip tie through the hole to further secure the tubing within the clamp (optional). Print with PETG for best performance in outdoor applications.
This elegant Christmas tree combines minimalist design with origami elements. The tree's geometric folding pattern creates a clean, modern look. It consists of six tiers that gradually taper upward and can be crowned with a tree topper.…
Parametrizable adapters for low pressure hoses for a hurry. The central part is to use one spanner, it rounds to millimeters. For other sizes, just change the values of the parameters hoseDiameter in the spreadsheet for your needs There…
Source: https://drive.google.com/drive/folders/0B5j1iQ1NUCTcak1KRU8zWFZpQjQ Print Settings Notes: I recommend to use a bit of horizontal expansion, like 0.5 Category: Models
Starshade is origami created by NASA for deployable sloar panels in space. This is 3D printable version of it. Add a pause before 2nd layer during slicing. After 1st layer is printed, place mesh fabric , secure it with magnet or adhesive…
A gravity irrigation system for your plant pots. Easy to use! After installing it into your plant pot and partially covering the ring with soil, just add water and let gravity do the rest as your plant will have water provided all around…
This is a 7-inch diameter irrigation ring designed to be used with 0.375-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…
Printed holder for origami dripper. Similar dimensions to the original transparent holder, it fits for sure for glass servers from Hario. You have to turn the model over and you can print without supports. I printed on Anet A8.
Stand out from the crowd with this uniquely crafted geometric wall decoration made from vibrantly coloured 3d printed shapes! Perfect for adding a modern, artistic touch to any interior space. Liven up your bare walls and bring a touch of…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
I saw geodesign's grid and canals for Takenoko and really liked the models (maybe because just the day before we'd managed to accidentally knock over our elaborate tile layout ☹). However, I really wanted single tile holders, not triples.…
20-way splitter for DIY home automated irrigation system Designed for: 1x input hose 8mm (inner diameter) 20x output hoses 4mm (inner diameter)
This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…
Use this on the V3 Kirigami bed to get the same Y offset as on the V2 and remove the back/forward wiggle which happens because there is not enough tension on the springs. It can also be used to fix the maximum offset of the V3 by putting…
Remix of https://www.printables.com/de/model/103003-drip-irrigation-ring/ for bigger pots. Added additional peg holes for increased stability and to make leveling easier
Barbed drip irrigation fitting. Fits 1/2" poly Category: Outdoor & Garden
This is my own design. It is heavily inspired by the High Republic Longbeam , with elements from sailing frigates (i.e. fore-, main- and mizzenmast, cannons, bowsprit). I imagine this ship to be about twice as long as a Longbeam. Assuming…
2D model of a lion , easy to adjust to your printer size
Summary Aside from creating things that are fun to look at and play with, principles of origami can also be used to prototype new designs, create helpful tools, and solve real world problems. This Oriceps design is an example of a…
Kirigami Bed Front with insertable Voron Logo.
Revel in the excitement of 3D printing with the intricately detailed Kerrigan Bust 3D Model, designed exclusively for avid hobbyists and gaming enthusiasts. This support-less 3D bust has been prepped and primed for printing, mirroring…
Attempt to recreate the origami magic ball as a lampshade. Math is not exact, so don't judge. Working on custom supports as this tends to break Cura. Also including solid body.
Adjustable sprinklers for 4.6mm (3/16") hose. The flow through the sprinkler may be adjusted by twisting the cap. Multiple sprinklers may be places in series using the provided tee. The sprinklers uses a 2.4 x 18 (OD) mm O-rings to reduce…
🦄 The Minimalist Fold - Origami Unicorn // Vol. 02 🦄 I have a library of high-quality 3D models waiting for you on Instagram. 👉 https://www.instagram.com/cozy.craft.studios/ Magic meets modern geometry! Bring a touch of fantasy to your…
This model is styled as a module of a real frigate ship, has a very simple design, and is also suitable for 3D printing. This model is intended for decorative or imaginative play purposes only . It is not suitable for contact with food,…
Morrigan's Aftermarket parts: Prefix part numbers. Example : All parts starting with A will be Wide Wheels A- 46mm Wide Wheels for 60mm wide AG tires. (over all makes model 14mm wider) 3mm inward and 7mm outward from original wheels.…
The Twist Close Octagonal Box , a captivating 3D-printed origami design by Camilo Cortes , combines the elegance of origami with the practicality of a self-closing container. Let’s delve into its intriguing features: Design and Concept :…
UPDATE: 6/3/26 added STL of longer version at user request (+ 50 mm, about 210 mm total) This model is a printable version of the rainbird style drip irrigation stake. The center hole is sized for floraflex ¼ drip line. The orange stake…
This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…
Ring tray inspired by the classic Origami fortune teller! Or you might know it as the Cootie Catcher :) Printed without supports but I'd use a brim to keep it firmly planted while printing. Should be right around 3hrs at 0.28mm layer…
I wanted to try to see whether I can print something so thin (like a piece of paper) and make origami with. You will need a very well calibrated Z axis and first layer. If you liked this project, you can now support me by buying me a…
une panthère en origami . C'est une oeuvre d'art inspirante et très belle parfaite pour décorer ou montrer a ses amis de plus elle possède un style contemporain /low poly
Garden hose to 1-4th drip irrigation adapter. adapter works but im having trouble getting it to seal Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Prusament PLA…
Imperial II Frigate For star wars armada. Designed for resin 3D printers, for best result print at 0.05mm with AA2 or 0.02mm no AA. If you like my work and want to support me you can visit my Etsy shop:…
*** Update *** I added internal baffling to the manifold to even out the distribution to the 10 outlets. I was using a soaker hose to water my garden, but I found it had a few shortcomings. I was watering areas between my plants that did…
This is pretty basic and probably has too many holes but it kinda works, so here it is. Tips for printing: I had better luck with flexible PLA than with TPU, mostly due to stringing. I'd really like to print it thinner, but I needed 3…
Another irrigation peg / ground stake / hose tube holder for 16mm diameter
The single extruder - dual color edition of the new box. For details and desciption see the original model: Storage Box with origami folding lids V2 For your convenience, all necessary files have been added.
This is a foldable 3D printable origami bat , designed for quick and easy printing. With its paper-like folded look, it transforms from a flat model into an eye‑catching Halloween decoration in just minutes. Print it fast, fold it once,…
Inspired by this design , but with single 3010 for the popular kirigami bed. The model isn't pretty but it works well. It would be easier to center the fan but many people use wago connectors and this would not work so I shifted the fan…
