Liczymy pasujące modele…
Lucky charm gift for New Year's Eve with a function! The coin included in the horseshoe clip for the keychain can be used as a token for any shopping cart. On the coin is on one side a shamrock on the other side the number 26 for 2026…
Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
Fate bringer hand cannon is a rare weapon which drops from vault of glass raid. this model prints on one bed and has holes for a 4.8mm metal rod to help with alignment and gluing. Print instructions Print all the parts as the import…
Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…
Updated my Darth Fader to fit on the Behringer X32 console, Requires Supports just under the fader overhangs.
A rack large enough to fit 3 Behringer-style desktop synth modules. I designed this at the request of a friend who was rapidly running out of desk space, based on some existing designs found online. This will fit any 3 modules of equal…
This is just a tiny and simple stringer to put anywhere on your blaster to fire at roughly 60 fps, so nothing to write home about but probably highly useful for close quarters games against shields or special targets that require mega…
“Accept the pain, but don't accept that you deserved it.” - Dalinar Kholin , from Oathbringer by Brandon Sanderson A neat little, to-scale (roughly, at least, Alethi heights are weird to have to work with) Oathbringer, to include the…
Visit the original page for more detailed instructions. I used any screws and bolt I could find to assemble it. Be prepared for a lot of sanding. I used plastic boxes/trays to emulate the spring as the original poster suggested. I don't…
This stand can hold two synthesizer. You have to take apart the model in slicer to fit onto bed. You can use heat inserts and 3mm screws or simple glue them together. The two side can held together also if you heatinsert 4 screwnuts on…
MechWarrior Online Hellbringer, roughly 130mm tall. Fully articulated, and tested, all parts are error free and printer friendly. Multiple Torso and weapon options, and like the Atlas, does not require any glue for assembly. I used a…
Update --------- LANKA Overhaul Mods for Leedle's cool Lanka stringer blaster. Thanks for making these files free and remixable. Changes made (shown in the pictures in green color): modified the mag retention to use angled Talon mags…
Also in the READ ME.txt file: This version of the Cricket has a slightly larger grip, modified lever with better handles, and a redesigned receiver that allows for low power or high power shots, depending on the elastic draw length. It…
designed this case to fit on the shelf in my safe. print the latch at 100% infill. you will need: 2 - m3 x 18 button head machine screws (for the hinge) 2 - m3 x 23 or 25 button head machine screws (for the latch and the latch catch)…
This is a replacement fader knob for a Behringer X32. The originals come off very easily and replacements seem expensive for a piece of plastic. These print well on their side with slow bridging. I printed them at highest detail in silver…
WARNING DO NOT USE A 996 SERVO WITH A EBB36/42 YOU WILL KILL YOUR BOARD the 996 servo can draw a peak of 1.5 amps which is enough to fry the 1 amp 5v rail that is found on the big tree tech ebb boards. I just found this out the expensive…
"Of unimproved metal, hot and full" Fortinbras is a fully 3d printed single shot flare blaster that uses absolutely zero hardware other than 1/8th inch elastic (other sizes should work). It fires using stringer shells that I also…
Since I only have very little space in my music area, I developed a compact stand for the two Behringer synths. I have sized everything so that in order to protect the synths from scratches, you can easily apply 1mm anti-slip pads in the…
2026 Gimbal Lucky Charm / Glücksbringer with different ring clearances from 0,20 mm to 0,35 mm. Beside the different clearances, the Gimbal Lucky Charm is also available in different versions: 2026, for single tool 2026, for multi…
Printed in 2 parts (left and right side). I used PETG, use whatever filament you want. Parts are oriented for printing, I printed it with 0.3mm nozzle (because I'm insane), you can use whatever you want, preferably 0.4 or 0.6mm. Use a…
This is a relatively easy print; however, I will say these models are not to scale, so if you are looking for a 1:1, make sure to set the scale to 75%. Besides that, I highly recommend orienting the models to have the most surface area…
Pokud se vám model líbí, budu rád za váš like. If you like the model, I would be happy for your like.
This is the Springer Perilous. It is a long draw side-mag pump action threaded rod springer. It has linear rail in the prime. It has a quick swap spring cap, and uses 11" springs. It uses Talon mags. It is capable of achieving well over…
I wanted to finally put my mixer into a light case rack. The original mount would be suitable for just that, but I plan on adding some wireless devices and found out that there was not enough clearance for xls plugs to be permanently…
Most "tube squeezer" designs are based on forcing the tube through a fixed slot. This is either achieved by manually cramming the tube through a slotted novelty-shaped plastic toy or by using a flimsy rotating key in a feeble attempt to…
Die ist eine Weiterentwicklung von Christian Tablethalter. Einfach zwei, oder besser drei, der Halterungen ausdrucken und mit den Original-Schrauben des Mischpults befestigen. Die Halter sollten auf der Seite liegend gedruckt werden. Ggf.…
At the time of the Behringer X32 release, the iPhone 3 was the main iPhone and the 4 was just about to be released. The phone holder on the X32 was designed to fit these older phones, but now 13 years later, the holder is no longer able…
---------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------- This toy is designed to get a rocking feeling…
A table stand for my mixer. this way I can see all the controls at a glance and from a distance. you can loop the cables under the beam to keep it a bit tidy. Use some force to clamp the parts together. It's a tight fit.
sehr schnell druckbarer Glücksbringer für Silvester in verschiedenen Varianten keine MMU nötig, einfach Materialwechsel bei 2mm einfügen Very fast printable talisman / lucky charms for New Year's Eve No MMU needed, simply a material…
Brackets I used to mount a UMC22 underneath my desk. Should also fit a UM2, but I don't have one to test with. Takes just over 1.5hrs to print each bracket on my Cetus. Mounting holes are sized for #6 flat countersunk screws. You can also…
A Springerle mold creates uniform biscuits that are more 3 dimensional and can have more intricate designs. This Flower shaped mold can be used with Sugar, Shortbread or Gingerbread dough. The mold is first lightly oiled and then…
The faceplate has pockets for 6x2mm magnets to hold the faceplate on the mixer. You can press them in or add some glue. You can print the model as it is and use a pen to label the inputs. I added extruded text for the labels and printed…
Anime Cosplay Derringer for Kaguya-sama Love is War. Artistic interpretation for ease of 3d printing. No secondary finishing required. Feels good in hand :) Yes, I know it doesn't have any sights--but, come on, a derringer is a…
sehr schnell druckbarer Glücksbringer für Silveste kann mit und Ohne MMU gedruckt werden, ohne MMU einen Materialwechsel bei 3mm einfügen Very fast printable talisman / lucky charms for New Year's Eve Can be printed with and without MMU;…
The led illuminated sliders of the Behringer 2600 (ARP 2600 clone) don't look that good, are a bit too small and the LED light is not shaped well to indicate the position. SliderCaps2600-slider_Caps_akf_BM is the final design but you may…
Give the gift of happiness for the new year! Simply combine a 1 euro cent coin with this 3D print and put a smile on someone's face! I wish you a happy new year and good health in the coming year! (I printed with a 0.4 mm nozzle and 0.2…
Mount for the Behringer UMC202HD USB audio interface (maybe works for other models, too). The front plates are hold in place by M4 melting inset nuts. Printed in Devil Design PETG on a Prusa Mini clone.
Angled stand (22.6 degree elevated) for a Behringer X TOUCH ONE control surface.
Friend of mine liked the design from Thingiverse but wanted a place for the wires to sit. The gap for the wire holder is the same on both sides only because I didn't feel like having a “correct” way to mount it. I included the f3d file if…
Remixed sushimoto's gear which had a perfect teeth fit but my buddys Benz had a different shaft size (6mm) Print Settings Supports: Yes Resolution: 0.2 Infill: 100 Filament: PETG
This is a mount for a Behringer U-Phoria UM2 audio interface. didn't like how it took up desk space and also how it would get dusty after a while so designed a mount so that it can sit under the desk. uses 4 tiny screws (guitar screws…
This paint tube wringer/twister was modeled in FreeCAD using a parametric approach. Users can manipulate the model to suit their individual needs through the manipulation of the “parameters” spreadsheet within the FreeCAD model. The STL…
I recommend printing perpendicular to the printing plate, it will preserve more details and the layers are not so visible, at a low layer the time is longer, but the details are more beautiful. So far, the print with Pla Prusament silver…
Ich habe aus mir unerfindlichen Gründen einen Faderknopf verloren. Dieser stammt von Behringers X-Touch DAW-Controller. Ich habe ihn knallrot ausgedruckt und ihn mit dem Main-Kanal kombiniert. Passt! :-)
Einfach mindestens 2 der Halter drucken und mit den originalen Schrauben des X32 festschrauben. Ich habe auch die Fusion 360 Datei hochgeladen, so kann jeder Anpassungen z.B. für andere Dicken an Tablet vornehmen.
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
Behringer X-Touch rack mount ear bracket left and right. as these ear brackets are impossible to find online, i made my own ones. Print settings: -Print 0.20 Quality -infill: 40% -Material:PLA -No support Print the bracket with the…
Models of the convocation's constellation crystals, separated out so you can print each crystal in appropriate color, print the constellations in white (or color of your choice, maybe glow in the dark) then slot the constellation into…
The latch of the original cover is too flimsy and will break off easily. This replacement cover is not an identical copy (with the same problem), but uses a different latch spring concept. Since this lid will sit slightly deeper inside…
This extension allows you to fit Behringer Model D into the same rack/stand with Neutron, Pro-1 or other synths of the same size and case style. It's construction allows to install up to 8hp Eurorack modules. Mirror it in your slicer if…
Elevated stand for behringer xtouch mini MIDI controller. Because when its lying flat its not so comfortable to use. Two versions included - one with 27mm elevation, so my friends Keychron keyboard can fit underneath it. You can read…
This recessed rack ear is a (hopefully) improved version of the one made by cedd. The original suffered from too much flex when mounted in to a 19" rack, leaving an impression that it will bend over time or crack when not handled with…
This is a remix of one of @CalebKraft’s 6mm trim pot caps, originally designed for the FM-1. They fit the 6mm trim pot knobs found on most desktop mini synths, including the Korg Volca series, Roland AIRA Compact series, Behringer Mini…
11-08-2025 M5G lowers haven been updated to have 1 extra M3 , 25mm reinforcement bolt ------------- 11-10-2024 M5 nut lower have been added. for a stronger connection it will use a 30mm long M5 bolt with 3d printed grips ------- 9-10-2024…
This is a pair of sideplates with feet for Behringer U-Phoria UMC series audio interfaces. I've installed them on a UMC404HD but they should be compatible with UMC204HD, UMC202HD and UMC22, but I have no Idea if the screw holes match up…
A stand for the Behringer TD-3 Analog Bass Line Synthesizers and RD-6 Drum Machines consisting out of two side pieces that do fit it's casing nicely including recesses for the rubber feet. The bottom side of the stands do offer notches…
Modeled in Fusion 360 Printed in PLA .2mm layer height
This is a simple stand I designed for my Behringer Q502USB mixer. Making things more accessible when placed on a desk. It will probably work great for similar ones like the 302 and 802 as well. Might also work with bigger ones like the…
This is a shock mount for the Behringer XM8500 dynamic microphone. It's designed for use with the stand adapter included with the XM8500. It works great to isolate the mic from stand and desk vibrations - it really helps with stand…
A heavily revised version of the Stringer Mega Masterkey by Bruce LeedleLeedleLeedleLee that is specifically designed and tailor fit to act as an underbarrel attachment for the NSK-X blaster. This has a special grip portion that sits…
Glücksbringer für Silvester ------- lucky charm for New years eve
Give the gift of happiness for the new year! Simply glue the 1 euro cent coin to this 3D print and put a smile on someone's face! I wish you a happy new year and good health in the coming year! print around 98%-99% for snapfit. Happy…
This 3D model is a custom-designed dust cover for the knobs of your Behringer Flow 8 mixer. It is crafted to fit perfectly over the knobs, providing protection from dust and debris, ensuring your equipment stays clean and in optimal…
This is a part of our Stormbringers 2 project! Subscribe to the pre-launch page on Kickstarter: kickstarter.com/projects/dakkadakkastore/stormbringers-2 Stormbringers are not just soldiers; they are a force of nature. Clad in armor as…
This is a custom-designed sun hood for the Behringer X32 digital mixing console. It helps reduce screen glare in bright environments—perfect for outdoor gigs or sunlit venues. The hood ensures better visibility of the display without…
This is a broadcast-style conversion kit for the XM8500, designed to mimic the aesthetic of the Shure SM7B. The model was developed in Fusion 360 using precise caliper measurements of the XM8500. While the internal dimensions are…
A case for the Behringer RS-9 Sequencer allowing you to use it in standalone mode rather than mounting it into an Eurorack setup. The case provides the following features: snug fit for the RS-9 module to reduce the needed desk space to a…
This will fit on a Behringer X32 sound board. No supports needed.
This is another case for your Harlot Darringer. it slips together as a friction fit. walls and bottom are 2mm thick.
I made a side panel for my Behringer for a direct replacement so you can change colors or make Star Wars versions like I did. Category: Audio
A handy model where you can fix your Behringer Ha400 Microamp device under the table. The bolt holes are open. All you have to do is screw the bracket to your table. I recommend using support in printing. Designed with wide tolerances.…
Side attachments for Midas MR18 and Behringer XR18 Air Mixers to protect the device body from scratches and possible liquid spills on the ground. Adds 10mm space from all sides. Print one piece for each side, which requires four M4 x 10mm…
**** UPDATE 2024-10-11 **** Based on updates to this ecosystem that I made for the Low Hardware Mini Claw, I've done similar much-needed updates to the Frayed Knot! It is now suitable to consider this a production release, version 1.0!…
Ah, the tangled web of the audio interface! We've all been there, wrestling with cables like some sort of octopus in a tech-induced wrestling match. It's a constant battle between a clean workspace and the siren call of sweet, sweet…
This is part of our new Stormbringers project , subscribe now to get Early Bird discount! There is a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers! patreon.com/dakkadakkastore…
Not every blaster needs to fire darts at 250FPS 50 times a second. This little guy was created to solve a very simple problem: I want to have a fun little pistol for plinking at zombies with in Humans vs. Zombies. It achieved that goal…
Just a simple under desk mount for the behringer um2! My main goal with this mount was just a simple way to mount my audio interface under the desk without blocking any of the ports and dials. Just 4 screws needed to mount it. (Maybe can…
A while ago my older brother asked me to 3D print him a life sized Ashbringer. I told him no because I didn't see a file for it. I eventually threw together my own model for him. Should be a good Christmas present. All of this was…
A Stand for the Behringer x-Touch mini that can be mounted on Top of a Saitek or Honeycomb Yoke using their mounting screws for instrument panels. 2 pcs needed. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
Hello, Here is small and easy project of Behringer U-Phoria UMC202HD mount. You can put your Audio IF under your table and… stable. In my case printed with PLA.
This is a very simple part to connect the two main faders of a Behringer Xenyx mixer so it's easier to keep stereo volumes equal. This fits on a 1204USB, so I assume it fits others in this range. Takes only seconds to print. Print…
These two Blasters' files were offered for a small fee on etsy, but due to recent changes in their policy, the listings got taken down. They barely sold any, mainly because they're stringers that require hardware so i just put them here…
High Standard Derringer DM 101 Magnum
Right up front, I have something I need to get out of the way. THIS IS NOT A REMIX OF THE LANKA 2 BY LEEDLE DYNAMICS! THIS IS A COMPLETELY ORIGINAL BLASTER DESIGNED BY ME THAT JUST HAPPENS TO SHARE ESTHETICS AND BE INSPIRED BY THE LANKA…
DCAPS are designed for the Behringer Model-D case and can be used either as table top (perfect with Arturia Keystep) or as an extension of an Eurorack Modular System. To mount the DCAPS on the original Behringer Model-D case, remove the 4…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
A 40° angled desktop stand for the BERHINGER EDGE, SPICE, CRAVE & GRIND that screws directly to the synth for stable, comfortable hands-on control. Replace the wooden side panels with the printed parts and add 7–8 mm rubber feet in the…
Ive searched for a Behirnger Wing sparepart fader knob knob. I didnt find one that i could buy in an afordabe price. So i grabbed one ar grabcad and modified it. The main probelm the slot for the fader motor isnt more or less "standard"…
Not for direct printing. Use this model as reference for remixing the grip.
PLA Füllung 20% Schichthöhe 0,3mm ohne Stützen, ohne Rand
The round base of this model provides most of the stability so I printed mine at around 15% infill as it doesn't need to be particularly solid to work well. The side walls are measured to sit between the rubber feet of the interface so as…
3D gedrucktes Gehäuse für den Behringer 2600, ARP 2600 clone im Vintage design. Die obere Gehäuseabdeckung wird mit 4 Schrauben an den seitlichen Wänden verschraubt. Der Korg SQ-1 Sequenzer Gehäuseaufsatz wird mit 2 Schrauben auf der…
The adapter allows you to mount a Behringer POWERPLAY P1 In Ear Monitor unit to a drum rack using a Roland MDH-12 pad mount. The adapter firmly attaches to the Behringer POWERPLAY P1 In Ear Monitor unit by utilizing the mic stand mount on…
Scale it as large as your like! I find the finish is best by printing in pieces and then gluing together.
