94 modeli
This is an articulated roach model. It has six legs and a head with joints that snap into the body . It's pretty creepy. Printing Tips Available as a complete kit card or as individual parts. Printable at 0.3mm layer height to save time.…
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
A smaller-scale princess peach costume parts. Print as lightweight as possible to keep from sliding around on the head. I'd recommend 1 perimeter and low infill %. Designed in mind without needing support. All that's needed to complete is…
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
cool table decoration
This is a bait station for insects, in other words, a container that houses insecticide or poison in a way that's attractive and accessible to insects, but less accessible to pets & other wildlife. I was prompted to design this station…
A stand for the Garmin R10 Approach, that will allow you to level it on the course, or at the driving range. The hole in the middle if designed for a 32x7 mm levelling bubble. Print at 0.10 layer height for best results.
after my cat got into this station, I would now recommend my own from-scratch redesign, with a clip-on lid . — Strictly speaking this is of course not a trap, rather a bait station, i.e. a small container to apply poisonous bait for…
This is a refillable insect bait station designed to attract and trap ants, cockroaches, and similar pests—while keeping pets and curious paws out. The low-profile entrance allows insects to easily access the bait, while the enclosed…
Say hello to never buying another propeller guard for your cinewhoop :) Update 19.05.2024.: See the upgraded, better version here: https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade A little back…
Here is a super easy print, that takes less than an hour. It is optimized for 0.4 and 0.6mm nozzles and needs no supports. Print the small eyes with a brim, and cut it off after printing. The eyes must be glued on. You may want to use…
Printed with support from Meshmixer on an ultimaker2. 0.1mm layer, 20% infill Category: Creatures
This is an overstable approach disc similar to a Discraft Zone, or MVP Entropy. Prints well in PLA, but for best results and durability, print in TPU.
100% infill Use glue to put 2 parts together PETG and PLA both works fine Created with ender 3 v3 se
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
I have always been looking for an articulated arm to put a vise or different tools/supports to work with. Every one of them that I printed from already existing model has the same problem: tightening it to much and you loose any sort of…
A pest exterminator themed miniature party hat with a cockroach bobble head for effect. The hat has straps on the inside where a string can be attached to keep it on your head. I recomend using the attached gcodes as they are prepared to…
A stealthy way to hide an AirTag under your bike seat (modelled to fit the Giant Approach Seat: https://www.giant-bicycles.com/us/approach). The two pieces clamp together using M3 hardware. Use the bolt length that works best for you ( I…
Update 22/05/2024: Added version 3 of the lure body with mesh fixes and an additional cavity for internal weight (without extra weight, it's not sitting straight in the water. Update 22/05/2024: Added version 4 of the lure body. Moved the…
Cockroach Poker This is a remix of the fantastic Photo Box game insert created by Gut Shot Games . Enough room for all game cards and instruction book that fits above the cards. Made specifically to fit Photo and Craft Keeper 4x6 inch…
Articulated Roach with a left leg (mirrored and rotated) and object without the card
My CAD version if Fungineers Funwheel Thunder rails had just one height. Yes is exactly recreating the Thunder rails model but without 3 heights (just the middle height), logo and the horrible middle section. And no, these are not TFL…
Acknowledgments Thanks to pastrami4033 for putting a locking lid on the bait station originally designed by guppyk , and uploading the .FCStd file. Bait Theory These bait stations are designed to contain poisonous gels. Compared to solids…
Key for Garmin Approach golf sensor CT10 to replace battery
This is a remix of - https://www.thingiverse.com/thing:5131720 I saw this, thought it was great, but my alignment stick was to thich ( 7 mm ). So i looked at this object and designed a copy to work with the 7 mm alignment stick, not as…
Before printing, check the valve handle you are replacing. This one has a 12-point broach design which is pretty common. I couldn't find any so I designed this one. About the Design: This design incorporates two features specific to FDM…
Removable miniature holders I modified the miniatures insert to include a 1mm lip on the bottom inside perimeter. This allow you to lift out a section of minis without them falling out into the box. Board storage on top I also adjusted…
Simple Motel like keyring for you own Roach Motel
Printing Information: Use tree support to support the voronoi structure. Use a brim, since its contact surface with the printbed isn't all that much.
@LEOTE_approach creates amazing mods for the Creality printers such as the Side Panel addon for the K1 series printers. I made tubing clips designed to hold and guide tubing on these custom side panels. They are little clips that just pop…
Designed as a broach for my child's Halloween costume. I didn't want to damage the Halloween costume, so the broach uses magnets (2 attached to the broach, and 2 on the other side of clothing) to stay in place. Features Color change at…
This is remix to allow you to mount a K1/K1C tool holder to the same printer' Side Panels created by @LEOTE_approach for the K1/K1C/K1SE. I also have a Multiboard compatible version in my profile. Printing 0.20 Layer Height No Supports…
How to charge a Garmin Fenix (5) without charging cable? DIY, building your own cable. Designed with FreeCAD, moddels available. To charge the watch, you can use the two outer connections for charging, regardless of polarity (works in…
Zik bugbliss - Senior Cockroach Whisperer
Same hardware as the original and print settings. Printed in BL A1 with PETG
Broach Files Holder for Elfa pegboard Required one pair of module clips https://www.prusaprinters.org/prints/60471
Just import to PrusaSlicer and press button "Split to objects". “An innovative way to generate eggs from an empty space.” Note that before splitting this STL into objects there is just a hollow space in the hen. By splitting the cavity is…
This is what you may call a cockroach golf ball marker.
I use the "sleeved cards" for a proxied copy of Skull using MtG lands. The cylinder hole is for storing nickels to track winning rounds in Skull. For info on the print settings I used and a list of other game organizers I've made, check…
The Tattu 300mah folded cell batteries I have were pretty loose in my NewBeeDrone Cockroach LiteAF Frame and would slide around in crashes, so I designed this lightweight battery grip, designed to apply some extra pressure to the battery.…
A Innsmouth Cockroach. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Creatures
Small trap for catching cockroaches while protecting the bait from pets. I suggest placing the bait in the center and some mouse glue on the outside. Place the trap in hidden places where cockroaches like to nest. I think it works for…
By turning the arrow in the direction of the wind you can see from which direction you have to approach (ship).
Waterer made for dubia roaches or isopods. fits pepsi bottles. would be good for leopard geckos or smaller dry climate lizards as well where normal dishes dry out quickly. file 2 has a wider base and higher lip
modified file adding rectangular slot for a toga.
Created for 2024 LM Christmas Community Print Drive featuring a city theme. You better watch where you step in the city. These might end up a crunchy gooey mess on the bottom of your shoe. Please follow the 2024 Christmas Community Print…
Whether you are cosplaying, going out, or need to accessorize your backpack. Here is Nanashi Mumei's Rune Hairpin and Broach. The runes are already oriented face down, just at tree supports (on bed only). You can thread a bobby pin…
This is a hand posed somewhat 3d printable amiibo style model of Daroach, a character from the Kirby series. A sorely neglected character, I made this for someone and figured I would upload it here. Pardon my bad posing skills and just…
Add a piece of egg crate and some food as bait Place in the warm area of the enclosure Remove shortly after with your freshly captured small size feeders Keep things sanitary. Handwashing and hygiene are essential to colony health.…
Printed in TPU Uses 2 standard whoop canopy screws Bump pad part at each end intended to mount with the bump facing out/down. There is a pocket for the canopy screws so the battery does ride on the screw heads, at the very least with out…
A simple solution for the game cockroach with missing legs. Just print without supports and fit it into the cockroach.
Advert cockroaches from Welcome to Night Vale ep Subway Everything is fine Ride the trains Tenderize yourself (as needed, sorry that was too long to fit) plus my addition of Place your ad here Print it in the logo mode, with a color…
This fits on the back of a Cockroach 3" frame so you can mount a RushFPV Cherry antenna in it. The antenna will be mounted at a 45 degree angle. I've tested it with the MMCX variant, but I'm sure it'll also work with the UFL version. The…
The broach that the angels wear. I recommend using the plate printed side for the outside since it will be smoother than the top.
Simple logo for Papa Roach. Prints easily with standard profiles.
Shower knobs that fit Kohler(and likely other) brand 16-point shower cartridges. Included the .blend file. I used Testors model paint to fill in the fire and snowflake impressions. Included stls for printing inserts as well. Edited…
redesigned the http://www.thingiverse.com/thing:17879 to make it look more like a bug Instructions print the model using 0.2mm layer height 80%fill and enable extra perimeters. Use a 0.35mm nozzle if possible. The motor is located to the…
Replacement nozzle for gel syringe. Common for Cockroach and Ant gel syringes
My copy is sleeved (Mayday Premium) and I couldn't get the cards to stay in the box without pushing up the lid, and other inserts wouldn't have helped with this. This insert fits snuggly in the box and holds the cards squished down (it's…
printed on a 0.25mm nozzle with 0.12mm layer height.
Printing Recommendations: Mecha _SUPERTHIN PROPGUARDS_Sonar Mount Material: Polymaker PolySonic Pro PLA Nozzle: .4mm Layer Height: .25mm Line Width Settings: Walls: 3 walls Top/Bottom Shells: 3 or 4. Your choice on surface patterns Speed:…
It was designed for a friend who couldn't find Mistmane's broach for her upcoming cosplay. ~BUILDING NOTES~ Included in your download is a zip file containing the Broach. The Broach prints on all normal-sized printers, mini printers may…
I used PLA-SILK, so that it could flex just a little, but most filaments should work fine, supports are recommended because of the lifted latch plate. You might need to work with the screws a bit to get them started. - enjoy!
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces.
Did you get centedes, cockroaches or other pests in your home and you do not know where they came from? If you have a shower drain as you can see here, they might have come through there, In that case there is an easy fix: Print this part…
This was made to fit the K1 Series Side Panels created by @LEOTE_approach. If you are looking for the holder that fits the hex slots on your K1 series rear panel - you will find it in my portfolio. This holder is based on a classic but…
Quick 4-8 min print depending on layer height. I cut my roach card in half as the full length is too long and 9/10 i end up cutting the card wonky. So a quick 2 min CAD design and i have a cutting template for straight roach cards. The…
The project started off as a simple “how cheap can I make a working SlimeVR tracker" and ended up turning into me trying to cram all the components into the smallest footprint I possibly could. It may not use the latest and greatest…
I used 3/8" bolts and washers to secure this brush stand/oil can to the top of my my ancient broach at work we use to cut Charpies. I coated the inside of one side with silicone, to make sure that it didn't leak. The walls are thick, so…
The sequel to Trapped, the guy is approaching beoming 3D and is now approaching his freedom from his 2D prison.
1 of 2 signs i made to make my boss mad
1 of 2 signs i made to make my boss mad
Very Beautiful Cicero cockroach
Na škole probíhá projekt KA2 Erasmus+ pod názvem The Town I Want to Live in: A Sustainable Approach. K hlavním cílům patří najít největší problémy ve městě, navrhnout řešení a nový design města v 3D.
external internal box feeder for cockroaches. krmítko pro šváby určeno k montáži do plastové krabice
a simple tray to store roaches and lighters/vape pens in your smoking area. If you prefer a different design on the lid then simply delete the all black/white models and include your own modifiers to include a different design. Hope you…
Did you get centedes, cockroaches or other pests in your home and you do not know where they came from? If you have a shower drain as you can see here, they might have come through there, In that case there is an easy fix: Print this part…
Waterer made for dubia roaches or isopods. fits pepsi bottles. would be good for leopard geckos or smaller dry climate lizards as well where normal dishes dry out quickly. file 2 has a wider base and higher lip
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This roach ring holds your funky cigarette roach, so you can smoke it all the way down to the stinging roger (it's the best bit) I printed this with supports, not a big deal as the print is so small.
This is the Roach Club from the video game Grounded 2. This 3D printable file isn't endorsed by Obsidian Entertainment, Inc. and doesn't reflect the views or opinions of Obsidian Entertainment, Inc. or anyone officially involved with…
This was made with the intention of serving as a cosplay accessory for the character of LuLu by artist LuLuYam, but aside from the antennae its shaped like a pretty usual roach so do with it what you will.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Tacoroach, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
Giorno Giovanna's Broach from Jojo's Bizarre Adventure Golden Wind Printed with dual extrusion. The scale is a bit large, so I would scale to your needs. Designed in OnShape
Roach perfect for pranks! It moves like a real one. After printing, cut two pieces of raw filament and fit them into the head holes as antennas. You can bend them with some heat for a better look, or add some glue to fix them ( see video…
