5460 modeli
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
F1 logo contoured keyring with raised logo. Simple keyring that can be printed in single or multiple colours. Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament. For best…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
The wires (or component, such as a switch or LED) are held by the flexible fingers so that you have two hands to hold the soldering iron and solder. The springs added to the original design provide greater flex in the fingers and a wider…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Wydruk około 6,12 €–7,48 € nettoWstępna wycena jednego wariantu
Notes: Add a color change at specific height for different colored frosting in your slicer. Joints have 0.2mm tolerances and print well on Prusa Mini+. If your joints are fused, adjust printer settings to compensate - or break those…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
This is a solution to store all your Arkham Horror Game Assets. It stores all cards and tokens of the game. It works well with the original Gamegenic card sleeves. The cardbox may be too tight for the older original Fantasy Flight Games…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please click ❤LIKE❤ if you appreciate my work 😊 AMS COLOR VERSION: makerworld.com/en/models/3168975-subaru-impreza-wrx-sti-sedan-wall-mounted Rally heritage meets minimalist wall art. This 3D printable model of the Subaru Impreza WRX STi…
Wydruk około 11,71 €–14,31 € nettoWstępna wycena jednego wariantu
Storage container with swiveling drawers made out of empty Prusament spool. Thanks to @Yell for the Prusament Spool CAD model that helped with the creation of this model. You'll need 2 of each drawer type and 2 pins. You may need to look…
Wydruk około 17,36 €–21,22 € nettoWstępna wycena jednego wariantu
These small tops are very light so they can be launched at high speed. They are easy to print, no support, no glue, no screw . You just need to clip the central axis up to the end and it's ready to spin (hold by the center when clipping…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
This gnome raised flowerbed (German: Wichtel Hochbeet ) can be used as an accessory for a Christmas gnome door or in a dollhouse. Print settings I printed the model with 0.2mm layer height, 30% infill with the PrusaSlicer QUALITY profile.…
Wydruk około 2,99 €–3,65 € nettoWstępna wycena jednego wariantu
Headphone holder like the source model, but with a large enough mount to fit on thicker desks. Made to fit on a butcher-block counter slab standing desk conversion.
Wydruk około 5,02 €–6,13 € nettoWstępna wycena jednego wariantu
My Color Order: White-Red-Blue-White. Or you can go White-black-white. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with…
Wydruk około 7,02 €–8,58 € nettoWstępna wycena jednego wariantu
FilaMan Revamped This is my version of a scale for the FilaMan project. Its an NFC powered automatic scale for Spoolman . I was going for a clean elegant look, hiding as much of the electronics and cables as possible. Please check the…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
In a land of Mycenaean , there lived a mysterious figure known as Silenus, who was Dionysus's tutor and guide through life's mysteries. One fateful night, he encountered an elvin puck with whom he shared a passionate tryst. Unbeknownst to…
Wydruk około 5,60 €–6,84 € nettoWstępna wycena jednego wariantu
Benötigt werden: 3x Wanddübel für 4er oder 4,5er Spax-Schrauben 3x Schrauben M5x10mm mit Flachkopf 3x Muttern M5 2x Kabelbinder klein Muttern M5 von hinten in die Wandplatte einsetzen Schraubenlöcher bohren und Wandplatte befestigen…
Wydruk około 8,84 €–10,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this print you can upgrade your normal compressed air gun to a gun with a venturi nozzle. This design is for a compressed air gun with a diameter of 7,5 mm on the nozzle tip . For larger diameter you can change the scale in your…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Just a simple collar that is redesigned from the previous model. Version 1 of the redesign is meant to be printed in TPU and it slides overtop the knobs. It is crude but works. Version 3.5 is a bit more detailed. It was meant to be…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This is a holder for an Apple HomePod mini that allows you to screw it into a standard recessed light fixture (or any other light socket). It not only mounts your HomePod mini to the ceiling but provides power! All without impacting sound…
Wydruk około 17,15 €–20,96 € nettoWstępna wycena jednego wariantu
Raspberry Pi5 case with the cpu cooler fully exposed
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Embossed first place medal. Uses art from PublicDomainVectors.org . Includes blank mesh and step files so you can modify the designs for any occasion.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
These are very simple tweezers, similar to the one supplied with a water mist magic pearls . I made it since we did not found spare parts in the local store.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Wargame Walls Collapsed Fan Section 16 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Wydruk około 7,77 €–9,50 € nettoWstępna wycena jednego wariantu
Cursed Unicorn – The Shadowhorn Model of the Cursed Unicorn Skull with Stand Collection: Fantastic Skull Collection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scalable: Yes (Includes three pre-sliced files at…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
This is a bit of a do-it-yourself project to print a hummingbird silhouette with interesting infill. The basic idea is to print the interior with no top or bottom layers to expose the infill. When you first import the STL, it will look…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
Some Notes: Printed 1,5 years ago, used support material, likely unnecessary. Printing is super easy, 15% infill. Warmed metal at folds with a hairdryer for 3D model fit (see last picture). When nailing to the wall, use a level for…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Self-Draining Sponge Holder | Wave Drip Tray - Remix raised by 6mm - Size: Large (115x85mm)
Wydruk około 4,54 €–5,55 € nettoWstępna wycena jednego wariantu
This is the MiSTer Multisystem2 Digital enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the included…
Wydruk około 4,42 €–5,41 € nettoWstępna wycena jednego wariantu
I could never get screws to print right. the threads never fit, or the tolerances were off, so while printing the Tablet and Notebook Stand from @Virus4711 I decided to make my own. Printed on a MK4 with a little extra tolerance for other…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
This is the MiSTer Multisystem2 Slice tray (Expansion module) enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support.…
Wydruk około 5,95 €–7,28 € nettoWstępna wycena jednego wariantu
Isolated the four individual traces for each of the four sides plus a center to slot them into. This makes it possible to print much larger (220% size on the Prusa Mini). I also added a center with a fake processor. Numbering is…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
A doorstop topology optimised for force on the top and back surfaces. Printing Should print with fairly standard settings. I recommend printing upside-down so that the sloped top surface will end up being flat rather than stepped (see the…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
I made a Zombie Hand in a few different poses. Coming out of grave To place on the ground, to let people believe, that a zombie stretches its hand out of the ground Bowl Holder Place on the wall to let 2 Zombiehands Hold your Bowl with…
Wydruk około 12,10 €–14,79 € nettoWstępna wycena jednego wariantu
Wanted to modify another user's design to be more compact and fit my needs. Used for reloading .338 Lapua Magnum Brass
Wydruk około 10,92 €–13,34 € nettoWstępna wycena jednego wariantu
Today an acquaintance of mine sent me the following image: I just had to make a sign of this. So here it is! New version: fixed typo.
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
You can scale this down a lot and still get good detail with a standard .4mm nozzle. At 50%, the loop prints cleanly, but it is very fragile. I used 2 perimeters for roughly the first 7mm and the last 18mm. In between, I just used 1…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
For this look start with White then switch to Black . Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it…
Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) Experience the serenity and grace of the Holy Mother with this finely crafted 3D printable model. This beautiful figure depicts the Virgin Mary in a peaceful, prayerful pose, radiating divine…
Wydruk około 16,44 €–20,10 € nettoWstępna wycena jednego wariantu
Simple model of Rudolph the Red-Nosed Reindeer, which can be easily disassembled as the original design is made by friend of mine, who cut it from the wood several decades back. I made my own version of Rudolph years ago from the wood,…
Wydruk około 1,21 €–1,47 € nettoWstępna wycena jednego wariantu
Cyclopes Troll head I was playing with in blender 3d The eye is removable in the the blender file and the reason for the extra geometry in the eye socket. Requires supports from the bed only, and I am able to print with 5% infill and…
Wydruk około 11,83 €–14,46 € nettoWstępna wycena jednego wariantu
Designed to be used with my Recessed Lens Board . Print with a 0.25mm nozzle and organic supports.
Wydruk około 0,26 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
OCTIX is a block and stick construction toy. The basic blocks and connections are octagons. The sticks come in 50, 70, 100, and 140 mm [multiples of 2 and sqrt(2)] since assembly is always at multiples of 45 degree angles. If you ever…
Wydruk około 13,97 €–17,07 € nettoWstępna wycena jednego wariantu
To attach it to the gear wheel, you will need: 4 pieces M3x16mm bolts & 4 pieces M3 nuts Print speed: 60 mm/s Infill patern: Cubic Infill: 30% For PLA - Nozzle Temp: 195 °C - Bed Temp: 60°C For PET recyclated filament
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15 Supports: Optional Brim: Optional Print Orientation: Default as modeled Vectors and icons by SVG Repo
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
I have had this blues band harmonica since I was a little kid. I wanted to make a nice sheath to protect it, but I also wanted it to have some custom details. I made the blues band logo as a stamp to emboss the leather and then made a…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
This lens board is designed to mount a Fujinon SWD 75mm f/5.6 lens on a Graflex Super Graphic. Other lens/camera combinations may work as well. The model has two parts, the board and the frame. Print the board first. Print the frame with…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Just a little twist. Have fun, great ice breaker gift when meeting new players
Wydruk około 3,45 €–4,21 € nettoWstępna wycena jednego wariantu
Glue up a sealing tape (~20mm*5mm) all around and plug into the tunnel from the outside. I've printed it with transparent PLA. The infill with several unconnected chambers to insulate better.
Wydruk około 11,12 €–13,59 € nettoWstępna wycena jednego wariantu
This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Remarks The new location…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a simple way to use the last bit of your spools. I went over the letters with a Sharpie to make the letters pop out. Pass it around the office to help motivate co-workers.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
use this stand if you want your Hazet Maintenance Unit mobile and not fixed to a wall. You will need 6 M6 bolts, washers and nuts as shown in the pictures and you have to mirror the strebelinks model if you don't use the presliced files.
Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu
These feet raised your Phanteks Eclipse P400 case off the ground, which helps if you have carpet. You'll need two of each model to raise your case off the ground. I printed mine with 3 walls and 20% infill. This might be excessive for the…
Wydruk około 4,08 €–4,98 € nettoWstępna wycena jednego wariantu
A bracelet with "Pumping Station:One" debossed on it. Created with FreeCAD, using the Curves workbench. The FreeCAD files contain the dimensional values in a spreadsheet, including alternate sizes: extra-large and small.
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
To be printed flat on bed, without supports. V3 untested.
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
I tried to use https://www.printables.com/model/537121-replacement-gear-for-playtive-electric-trains but this did not work for my application, printing also did not print teeth sharp enough on my MK4S with ASA. So this is new wheel made…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
This simple learning device is designed to help toddlers understand how parts fit together through hands-on exploration. By using different shapes and connections, children learn basic building concepts, spatial awareness, and…
Wydruk około 5,42 €–6,62 € nettoWstępna wycena jednego wariantu
This two-piece ornament is designed with exposed infill to create a unique artistic effect. Each piece is about 1/8" thick, making it suitable for mailing. To achieve the transparent infill look, I used these settings: Walls: 5, Infill:…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
The Satyr3 is an open-back headphone, and as such leakes quite some noise into your surroundings. This remix converts it to a semi-closed headphone by replacing the fascia by a vented dome , so you feel comfortable wearing it in public.…
Wydruk około 4,55 €–5,56 € nettoWstępna wycena jednego wariantu
Lard Lad Boy and Lard Lad Possessed
Wydruk około 5,57 €–6,80 € nettoWstępna wycena jednego wariantu
Midway Xenophobe Snotterpillar Based on Cover Art Not the ingame sprite...The artist who developed the arcade cabinet art obviously never played the game.
Wydruk około 9,19 €–11,23 € nettoWstępna wycena jednego wariantu
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…
Description This is THE 100, the fastest 3D Printer based on a printed frame. It does Speedboats in less than 4 minutes and is capable of doing high quality prints in 1/12th of the time a Ender 3 would need. By the time releasing, The 100…
Ghost for Halloween decoration
UPDATES: 2023-01-19: Added the option to change the total height of the hook and save space. The parameters will automatically calculate home many vertical hooks are needed. The hook is placed at lower ¼ of height. 2022-10-14: Fixed the…
This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…
Bambu Labs logo added to the lid with an AMS and an Embossed version. You also need 8 M3x20 bolts for the hinge and latches. Orginal design by Coffey72 which itself is a remix of a design by zx82net…
Meet the Mini Optimus Tesla Bot - a one-of-a-kind figure I designed, based on the legendary Dummy 13. This isn’t just a decoration - it’s the perfect collectible for any robot fan, not just those who admire Tesla! Update: 07.02.2025 -…
I wanted to combine 2 cool models that I have not seen yet but I thought would be funny. Printed at 50% scale .20 mm quality Skirt adhesion no supports
Re-mix of the same concept from David - but with Clip-on mounting and it prints easier / lower warpage. Clip-on mounting Shroud Easy on / off without removing screws No supports needed Smooth bottom No airflow restriction only 3.6g /…
[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…
Files for the compressed air engine used in the following project: FDM printed parts: Crank Case (Front, Rear) Crank Shaft Bottle Lid Engine Mount Piston Head Cap Resin printed parts: Cylinder Head Conrod Piston Seal Mold Other Required…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
The parent design is good, but I wondered, could I use about the same amount of material, but make it stronger/better ? The answer, thanks to Fusion360's generative design inspiration and stress analysis is yes! I hope this improved…
Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…
Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…
You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…
This is amazing model was made by rndmframes_printing and the licensing allows sharing with attribution so I wanted to make sure the prusaprinters.org visitors didn't miss out on it by re-uploading! Original link here:…
This is a pre-posed model of Godzilla Minus One. Scale the model to your device. The model is available as a rigged model so that you can post the model and the move to print the model. I posed Godzilla to my liking and printed and then…
The original model was impressive. The author vandragon_de has made a version without holes for bathtube use, but it has some missing solid geometry at the propellers, so that it won't be properly sliced(with CURA). so I fixed the issue.…
Inspired by some nautically themed films, suitable for resin printers, unsure about FDM
Assembly video: Update: Version 2 Added. Most people with a well-dialed in printer should use this new version. This Minecraft Creeper fidget toy uses a Cherry MX keyboard switch, or similar (I’m using a cheap Outemu Clicky Green switch…
I roughly based the aircraft off of the American F15 Strike Eagle.
The hole for the tealight has a diameter of 38mm. If you have a different sized tealight, just scale it up/down! Enjoy this model and leave a photo of your print! 👻👻👻
Introducing the Cherry MX Compatible Flat Top Keycap, the 3D printed keycap that makes typing a whole lot more fun! With its sleek and stylish flat top design, this keycap is the perfect way to add a personal touch to your keyboard.…
Videos FULL HOTEND: https://www.youtube.com/watch?v=FDKF7qeqDSg https://www.prusaprinters.org/prints/47884-anycubic-i3-mega-hotend-fan-box-also-mega-s-mega-x This Design fits the original Hotendbox and fan of an Anycubic i3 Mega. Its…
This version of the printer is outdated. Please have a look at: https://www.printables.com/model/572689-the-100-the-fastest-3d-printer-based-on-a-printed- Description This is THE 100, the fastest 3D Printer based on a printed frame. It…
This is an Ender 3 Pro based CNC! Watch it in action here! Build manual here! We now have a Discord! EnderCNC's GitHub Check out the user-builds !…
Closed loop timing belt GT2 60mm diameter. Suggestion to print from hard TPU (95A or 98A), no fill gaps, thicker wall if necessary. Tested on MyTechFun, torque is not too big, compared to regular belt. More details in the video. Important…
amp housing for one ZK-1001U amp, designed to use 2 m3 heat-set inserts for mounting. run wires through the bottom opening of the housing. Then complete the connections to the amp, and slide the amp into the case with pulling slack out of…
Inspired by Ikeda Yosuke's open/close sign design which relies on gravity and relatively frictionless joints, I decided to design one using planetary gears to drive the movement of the letters. An animation of the transition can be seen…
Designed to fit inside a 20 mm hole drilled into a wooden door, with a matching recessed magnet in the door frame. Once installed, the sensor is completely hidden while retaining the reliability, battery life, and Zigbee support of the…
My design for a stand that holds both the Apple iPhone MagSafe and Apple Watch wireless chargers so you can view and charge both devices at the same time. It holds both chargers flush with the front face of the stand and features a groove…
Riser that makes room for the canbus chain to move in a safe way instead of bunching up in the corner with the chance it unlocks the extruder (it happend twice) Both ventilated and closed models for download Supports are needed for all…
CHANGELOG v1.2.1 - Carriage Bolt Edition Tweaked the Knob + Cover pieces to reduce thin walls and features that wouldn't slice properly. Still requires supports on Cover Piece 1. v1.2f - Carriage Bolt Edition turning knob added, to allow…
The make is made of 6 panels, 3 wide by 2 tall for a final product of 24 inches wide by 16 inches tall This uses an improved panel system as compared to my previous background ( https://www.thingiverse.com/thing:3509102 ). A double sided…
Fits Gift cards and more! Prints with NO SUPPORTS! High capacity secret stash or gift box. Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Want to sell this? → Grab a commercial license on my Club! Only $20/month cancel…
These mouthpieces were designed in Fusion 360 taking inspiration from the profiles provided by the Wedge Mouthpiece website (https://wedgemouthpiece.com/all-trombone-mouthpieces). The mouthpiece files are named according to their names on…
This Fully Enclosed Open Source Cartridge Reader Shell (FEOS) is designed to be durable, well protected, and look stunning on your desk. The shell is a multi piece assembly, the shell base, the cover, battery and the faceplate. The “decoy…
