Liczymy pasujące modele…
A very quickly designed planter for Vase mode printing. I used a 0.6mm nozzle, 0.35mm layer height and a 1.45mm line width. If you want to riff on the design the Fusion 360 model is attached (please remember attribution if you do!) Print…
Since a variant of my fidget gear rings with knurling on the inside was occasionally requested, I made this one with diamond knurling outside and inside. It is available in 4 ‘odd’ sizes: 15mm, 17mm, 19mm and 21mm inside diameter. Also…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
Another take of the battery holder. No supports needed, print orientation like shown in picture. Enjoy
As Ender 3 v3 SE/KE has a rather unstable structure, the additional weight placed on top makes it even worst. I designed a handle to transfer the filament to the bottom of the printer. As a result, the prints are noticeably higher…
Once you print the body of the storage box, you can then decide what type of accessories you want to use - there are various options and you can, of course, design your own. To assemble it, you will need the following: 22x magnet 20x6x2…
Since the KE can move quite aggressively and the gantry can be quite wobbly or even tilted . I decided to design a spool holder that attaches straight to the base making the printer a lot more stable and coincidentally quite a bit lower.…
I created double sided version of Kyle Cup V5 as it suits me much better :). Remix of design: MandicReally https://thangs.com/MandicReally/Kyle-Cup-V5--NEW-DESIGN--Chad-Chalice--Stimulant-Stein--Monster-Energy-Drink-Can-Cup-17751…
Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…
Hello everyone. This is another take on mounting both the spool holder and filament sensor on the side of the Creality K1. To assemble the sensor and PFTE fitting on the bracket the stock screws can be used. Do not tighten them too mutch.…
Robux Coin 2 sideded remix
This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…
Thanks to this mod, you'll be able to place the filament spool on the side of your Ender 3 V3 KE and avoid the constant excessive vibrations that can occur when having 1 KG of filament located on the top of the Z-axis. If you're looking…
This plate allows you to mount the Filament runout sensor on the right hand side of the Creality K1 making it easier to use a filament roll on the side of the printer instead of the rear. This plate uses the two screws that secure the…
A side drawer for Mk3 I3 Edit 2021-01-29: Add the file for the left drawer. Edit 2021-02-01 : Addon to make it easier to assemble (nuts_helper_tool) Edit 2021-02-02 : Add No support drawers with 45° handle (files have 45d in name) Edit…
Remix of the Heavy Duty Side Spool Arm, specifically for the P1S. Thanks to suit for the original model. This version can be printed support free and is pretensioned to wrap nicely around the side panel. The structure of the model…
I was looking for a silencer and a protective grille for my K1 side fan. There is a wide range on offer here, but any grille in the airflow can increase or decrease the noise. As I didn't want to test everything, I constructed my own. My…
If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…
This model uses 22 links, 22 covers, 1 end, and 1 start. I printed mine from PLA. Some supports are needed on the start and end. This chain clips into the aluminum extrusion under the printer just like the existing wire managers. Thread…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Thanks to this mod for your Ender 3 V3 SE or Ender 3 V3 KE, you can place the filament on the side of your printer, either with @Tchaarm_1553187's mod or even with a dryer or portable spool holder. If you're looking for a mod that…
Hello Everyone I am sharing two versions of the modified Bambu Lab Scraper. I was annoyed with the original version because the Logo was placed on the wrong side. It should be visible when using Scraper. In addition, the project contained…
For older comments, remixes , etc. see the Thingiverse page where I originally posted this model. Otherwise all files are posted exclusively here on Printables. PRINTING I printed the main left/right sides and the top face down with…
Infill: 20% Support: Yes Material: PLA, PETG
A lightweight, ultra‑compact and efficient system designed to lock your shoelaces without tying a knot . These side lace locks attach directly to the last eyelet of your shoe (one on each side) and guide the lace through a multi‑stage…
I wanted a low profile side mounted spool holder that can be removed, other designs are attached with T nuts. Version 2 spool holder is closer towards x-axis (see pictures) Added a filament guide to spool adapter. Tall prints tends to…
I needed to save space and access the filament easily. I created this :-) (easy to print NO raft or support needed) 15% infill should be enough. It mounts on the right side top! Works for both - small and normal 1kg. filament rolls. 𝔗𝔴𝔬…
Xenomorphic six sided die. Added new gcode (2/21/2024) This worked awesome. I loaded some pictures. Minimal supports on the outside and no supports on the inside.
A seamless phone/ipad stand. It takes 1 h 30 min to print. No overhang, NO sharp edges, No support, YES YES YES. More stands with various logo can be found in my other models, e.g.,…
Spool holder for the Ender 3 Extrusion that attaches to the side of the extrusion - to make space for a cable chain for example. It uses the screws & t-nuts from the Ender 3 spool mount - no additional screws required. I included the…
Just changed the appearance using mesh modifiers in PrusaSlicer. Print instructions Printed using Prusament PETG. Could be printed without MMU. Requires 2 filament changes if you want the multi color.
After I made the double sided standup sign , I realized the signs are a bit cumbersome to put away as you can’t fold them well. So I came up with this model which can be fully folded down. The sign has only a single side for the text to…
This is a quick-to-print guard for the Creality K1's side fan, a 120mm radial fan that blows a massive amount of cooling onto the print. Someone complained of having their failed part fall into and break the fan, which inspired me to…
This is my remix of Jesses side release buckle over on Thingiverse: https://www.thingiverse.com/thing:312961 The male part now fits either way, also it is scaled down quite a bit from the original and the edges are rounded a little for a…
I modeled this vase after i did the luxury vase, because i wanted one thats easier to scale. I also made a tripleversion of this, and changed the design a tad for that. Looks also amazing printed. :) Prints best with an 0.6 or 0.8mm…
A filament dry box that mounts to the side of the Elegoo Centauri carbon based on the design of @NaNO3 which was originally based on @Yanev 's parametric toolbox. I have included versions for the lid that work with or without the addition…
I was looking for a set of side boxes to store the accessories for the printer and found the ones created by KalleKnall (see section Remix). I liked the simplicity of it (especially the mounting brackets) and that it did not require any…
Made possible by my amazing Patreon supporters! If you like my work and want more models like this one you can support me in Thangs Darth Sidious, born Sheev Palpatine and also known simply as the Emperor, was a human male Dark Lord of…
This 3D-printed fidget model features a sphere inside an octahedron. The sphere has just enough room to move freely inside, allowing you to spin and rotate both the sphere and the octahedron in a few different ways. For the best visual…
Features Left-side mounting Steep angle to prevent filament poop from getting stuck Matching bin that fits under the chute Easy installation with no printer modifications required, uses existing screws and screw holes
4-11-22 updated model with stl parts
To celebrate our new president's election, we created a bust of Petr Pavel. There are two versions available. A casual in a flannel shirt and a formal one in a suit.
Leon S.Kennedy orignal pistol from the video game Resident Evil 4. This pistol is based on a real one the HK USP. I have used the dimension of this real pistol to make the model. If you want to 3d print it, I advise you to choose the…
You need 2 M4x8.1 Heat inserts and 2 M4x16 socket screws. First mount the base on the printer, after that you can mount the holder to the base. No need to reposition the filament runout sensor.
Overview A re-imagined side mounted spool holder for the Flashforge Adventurer 5M. This design fits over your existing enclosure piece “D1”. A 4mm x 10mm bolt might be needed to replace the existing bolt in the guard plate, although I was…
Here is one idea that considers environmental issues. I made an eco-friendly garbage bag holder using a plastic bag. You can brush dust off by hand because it is under the side of desk. The thickness of the table that can be attached is…
This Butterfly Knife, aka Balisong, has grips on both sides for those who know their way around Butterfly Knives and Balisongs. I couldn't say it any better, so here's a quote: “This thing is wicked fun! It's not going to carve a…
Hi, used these two great models, one from Fred Boisselier, https://www.printables.com/model/540699-creality-k1-max-side-load-spool-holder and the other from Hugo Groeneveld, https://www.thingiverse.com/thing:3020026 to create an excellent…
A small cylindrical container with a lid that screws inside the top. A generic small container for a travel essentials contest seemed a bit of a stretch, but I actually did take one or two similar containers on my last few vacations for…
držák nabíječky Parkside na zdi - udrží i baterii
Hardware: 4x M3x8mm either sockethead or countersunk screw work. 2x Red spade connectors small length of wire or cable 2part epoxy or other glue XT-60 Connector (the one I used:…
Hi, This is my version of garbage bag holder. I sticked it with double sided tape on upper side of my cabinet. You can place it also on side. I prepared several models, inner diameter 51mm and 68mm and 51mm dual holder. Also you can…
You can print dual-color, dual-side poker chips very easily. Specially designed not to use support. All you have to do is change the filament 2 times in a print. Chips are 40 mm in size, but you can print any size you want. Chips: 1, 5,…
Spool Arm for side mounting the original spool holder It is designed to screw directly into the left support beam of the printer, for extra stability - other spool holders that float right next to the printer tend to sag quite a bit BOM…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Used 2 self-tapping screws to attach to the shelf. Printed out in PET with at least 3 shells. Normal version for regular size tools. Bigger version for PASSK green impact wrench. Tested on: PABSP 20-Li C3, PDSSAP 20-Li B2, PASSK 20-Li A1,…
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
This is a remix of the Creality K1 MAX Side Mounted Spool Holder with an added PTFE guide at the top. It uses a PC4-M10 pneumatic fitting to hold the stock PTFE tube in place. The fitting just screws right into the plastic. It still…
A side-mounted spool holder for the Ender 3 v2. Will most likely also fit the original Ender 3 and 3 Pro as it just needs the 40x40 extrusion behind the left of the machine to support it. This holds the spool directly left of the extruder…
držák baterie Parkside na zeď
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
This short explainer video is less than 1 minute long. Side Cutter Mount adapted for use on the Flashforge Adventurer 5M (AD5M) with the DIY printed enclosure. One model suits the front right or left, while another model suits the back…
Changelog: 11/03/2025 - Fixed priming bars missing from part drawings pdf. Changelog: 02/21/2026 - Added hw kit suppliers for asia What is this? The Stagecoach Side By Side is a 3D printed nerf blaster that fires and ejects Sillyshells ,…
I rotate 90 degrees, increased 1,5mm of the lock and made the hook that rests on the printer thicker, about 1.5mm (previously it was 1mm). In addition to these other changes, I placed the Letters K1 on the side of the spool holder PLA…
A simple way to store the top cover of the K1 Max when it's not in use. I didn't like leaving it lying around or leaned up against something so I designed these rails to allow it to be stored with the printer safely and without taking up…
This version of the carboard spool rim has a tighter fit than the original, which seems to work better when used on Polymaker rolls, though I was still having problems on some rolls with them coming off. Instead of gluing, I added some…
[#1 updated the design slightly with a tapered ptfe tube hole to allow it to slide in better] [#2 updated it a little more to make it smoother to accept filament] An easy print to enable you to attach a wide filament spool to the side of…
Version 1.1 - Nov 3, 2025 - Beefed up the guide models for more reliable printing - Cleaned up geometry on bearing guide Version 1 - April 28, 2025 Watch the accompanying video about this mod Tired of the spool wobbling on top of your…
Unfortunately, K1Max do not have same fixation point on lateral panel to be able to use the original spool holder from MDFPereira @MDFPereira_263523 So i adapt the spool holder to my K1MAX. The PTFE have to be remove from the external…
Toilet - THRONE ROOM right side - sign, easy to print
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
printed with abs with 30% infill work great with all spool type.
In case someone needs CAD data, send me message. I can share it STEP, PARASOLID, PRT, CATPART …
Once you print the storage, you can then decide whether you want to use magnets or double-sided tape to hold it in place You will need the following: 6x magnet 8x2mm Ore Double-sided tape And A black marker to make the letters black It is…
EDIT: Added second version with bigger spacer, to release the tension on bowden tube. Requires 2x M3x8mm cone bolts, but tbh any M3x8-10mm bolt will do :) Bowden tube is stock, filament sensor bolts are stock! Designed for K1, but should…
Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…
The announcement of the Resident Evil 4 remake by Capcom made me want to model Krauser's famous knife. I was inspired by several illustrations and shots of the knife during the knife duel sequence between Krauser and Leon. The blade is…
Its My GCODE what i use. Mein GCODE was is so nutze. ------------Start Code----------------------- G21 ; set units to millimeters G90 ; use absolute positioning M82 ; absolute extrusion mode M104 S{material_print_temperature_layer_0} ;…
I have used this profile for big and small prints so its safe and tested you can see the result from this profile on my instagram page https://www.instagram.com/smotech3d/ ! The only think you need is to level your bed your correct and…
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Hi! I want to introduce you my drill press for Dremel/Parkside multitools. It's easy to print and assemble - you only need a few screws and nuts to put it together. IMPORTANT NOTE: Print “Lock_nut_Parkside.stl” and/or…
Do pobrania moja wersja powiększonej baterii 3x względem oryginału do Parkside X20V Team, wzorowałem się na wersji dostępnej poniżej jednak samą obudowę zrobiłem od nowa wykorzystałem jedynie wsad na ogniwa 3x… Oryginalne źródło:…
First mount the base on the printer, after that you can slide the holder to the base. WORK IN PROGRESS, still need to make the testprint but should fit according to the drawings.
Centauri Carbonのノズルの左側コネクター取り外しジグです。 This is a jig designed to remove the left-side nozzle connector of the Centauri Carbon.
Six sided dice for multicolor print Print instructions I used PETG because of more durability, but you can use PLA. I printed two cubes at once, one cube in color and set the other as wipe object, both turned up nice.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models to find something else you might enjoy! ********** [Update April 4, 2026] if you are looking…
Hi everybody, This was a character thought of and designed form scratch for the Prusa sla sculpting challenge. I wanted to make my own character for this challenge. The expected time for designing this figure was a little to short. Making…
This 3D-printed fidget model features a sphere inside another larger windowed sphere. The inner sphere has just enough room to move freely, letting you spin and rotate it within the outer shell in a couple of different ways. For the best…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
Summary: There are various version of this simple shotgun shell holder / side saddle available. On the uploaded pictures (Maverick 88) I used the 12G_5pcs_25mm__straight_velcro version. As Filament I used Prusament PETG with Carbon Fibers…
Creality K1 side fan protection in case parts fall from bed. Settings: Nozzle: 0.4 Line height: 0.2 Line width: 0.4 Supports: No Brim/Raft: No Material: Any (you can also use PLA if your chamber does not exceed 40 degrees Celsius)…
Centauri Carbonのノズルの右側コネクター取り外しジグです。 ペンチで外せますが専用ジグがあると便利なので作りました。 This is a jig designed to remove the right-side nozzle connector of the Centauri Carbon. I designed this dedicated jig to make the process easier and more convenient.
Resident Evil Inspired Phone Holder. Print Settings: Infill: 10% Layer Height: 0.20 Supports: Yes Use supports for the back of the round part of the Stars logo and underneath the left and right overhangs of the top part of the Stars logo.…
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
This is a protector fan cover to avoid getting the fingers inside by accident. Based on FeNi64 that it has a file of the model but I couldn't open it to print it. No supports need it Donations through Paypal
