Liczymy pasujące modele…
Snappy is a chubby little gator with a big smile and even bigger charm! Whether you keep him on your desk, gift him to a friend, or turn him into a keychain buddy, he’s ready to snap into action. This one-piece monocolor 3MF prints smooth…
An easy to print snappy fidget toy. https://youtu.be/HrO0uZ5QgzI Printing All parts can be printed without supports. Add a brim if your printer has any difficulty with curling around sharp corners. The Button caps can be printer either…
Other fidget models have a greater resistance, because they have more points of contact or are stuck together closely This one does not I have printed this design in PETG and PLA and either provides the same expeirence
Hello everyone! This is the Snapper, a 3D printed blaster shell that I designed to closely resemble the look and feel of the Nintendo Zapper. The Zapper is a classic toy blaster that I’ve always loved the look of, and over the years I’ve…
This dodecahedron-shaped box with a snap on lid. https://youtu.be/ia2_srxa-og Printing Requires good tuning for a nice fit. No supports needed. Experiment with adding a slight fuzzy skin for a pleasant surface finish. You may get a faster…
Cool looking life-/point-counter with snapping effect. I designed it small and cute, to count points in family board games. Easy printable and easy assembly without tools or glue. It counts to 99! Two versions avaible: 100% Version:…
Heard from the original designer Paul Ducarme (@PaulDucarme_3415198), he has official files posted on his own site, suggest everyone go check those out rather than my reverse engineered ones, probably improve your chances at making…
This is a small storage box for small parts with a division in the middle. The lid is hinged and it snaps closed. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different…
Are you breaking your fingers trying to snap those tiny pills? And the cutters with the blade send them FLYING! This small pill snapper gives you the right angle and force to snap those pills with ease! And it fits in most prescription…
This is a quick snap clamp for your mobile phone. The phone snaps in place with one move. To connect the moving parts together use small pieces of filament. The base slides into the mounting part and locks with a piece of filament through…
The SnapRack system is designed to easily reconfigure your sample handling rack on the fly to suit the needs of your current task. It fits 1.5, 2.0, 5.0, 15, and 50 ml tubes/falcons. Whether you want to pipet a master mix from a 15 ml…
Print 3 digit rings, 1 shaft and 1 end cap, slide the rings onto the shaft (check that they all have the same orientation) and finally push on the end cap. If the end cap is too loose, a dab of glue should fix it. If it's too tight, try…
ESP32 Case with Snappable Lid This case is designed to hold an ESP32 board as well as a standard female barrel plug to screw-terminal adapter. There is some room for additional wiring inside as well as an opening for connectors / cables.…
quick and easy replacement for often worn out or broken snappers for caravan doors i printed them in white and grey for 2 different caravans Update: I added 2 thicker versions of the pin, so you can look which one fits most to your setup
2 Simple Deck Boxes which Print in place and snap shut! A Vertical version which is similar to most deck boxes on the market, and a horizontal deck box which is a little shorter. Both have a slot in the front where you can insert an art…
I enjoyed how the original snappy doors work, so I took the time to assemble them into separate ‘plates’ for ease of printing.
I’d like you to meet Snappy, a little crocodile with a big personality! 🐊 He’s got those classic croc teeth, but don’t worry—he’s all about fun and games, not chomping down on anything. Do you like this cute crocodile? If you'd like to…
This Snappy Fidget Button remix arranges the buttons into a honeycomb pattern. It uses the springs from the original Snappy Fidget Button and the round buttons from the Round Snappy Fidget Button remix by bnorick .…
Drive your friends and family crazy with this fun prank dexterity puzzle. They can try and try and try but no one will be able to beat it. Except you of course! The goal: Hook the stick onto the portion of the rubberband that is inside…
Created a weekly pill organizer that is big enough to fit all your pills but small enough to throw in a pocket or take on the go. What makes this pill organizer special is that it clicks open only as far as each day with a snap so that…
I added left and right sloped hats as well. Printed with PLA (GD Filament) on Prusa MK3S+.
I printed the tall version of the Snappy Fidget Button by 3D Printy and liked it. After using it a bit, I thought a round version might feel better in my hand. Turns out it does, so I figured I'd share it for others. This print includes…
Simple remix from Avalance's model but with added tabs that allow the lid to lock in place. No supports needed. Print from photos were printed with Prusament Galaxy Black PLA. I've also printed with Inland ABS, but I find that ABS isn't…
Usage This is designed to have a limb (e.g., a thigh) inserted into the loop, then the elastic is pulled perpendicular to the limb, and snapped down. The spikes will drive into the skin as the elastic is pulled, and the elastic will snap…
If the original version was too small, you can enjoy large versions now :). Printing All parts can be printed without supports. Buttons can be printed face down without supports. Customization Spring Options Stiff Normal Soft Assembly…
The original IKEA Skådis hooks can be a pain, especially if you put something on them that grips slightly, like a pair of pliers. Once you lift the pliers, the hook comes loose since you'll never lift exactly vertically. That's why I made…
EN : The money clip can also be used as a staple in the office or wherever you want to stick something together easily. Slicing is best with 0.1 or 0.15, but 0.2mm is also possible I have used 0.15 in the existing gcode files. In…
This is a business card holder. It is quite large and will need LOTS of supports underneath. 0.2mm layer height tree supports
Meet your new, fun, little friend. Drive him around a rough surface and he will talk, or even snap at you - If you are lucky. The whole toy only consists of 5 parts. The body and 4 click-on wheels. The body is print-in-place. You may have…
I didn't like any of the existing expo marker holders and my dry erase board in my office isn't magnetic so I needed something that could clip onto the tray. Features : ✓ Prints flat with no support ✓ Uses minimal material ✓ Markers can…
I liked the Folding Under Kitchen Cabinet Fruit Hook (e.g., bananas) design by dmacnulty but I didn't have any of the assembly hardware: M3 bolt or M3 nut. So of course the best option is to spend hours on a remix—instead of just buying…
This saw handle is compatible with standard hacksaw blades that can be secured with an M4 nut. near the top of the grip. The saw is super comfy to use and surprisingly useful in many situations where the top bar of the normal hacksaw gets…
This is made to try helping others to make this fun little RobotGeek 9G robot arm. I will try to explain what is needed to build it. Program it and what pc software to use to control it. Post-Printing Part List 1x Arduino Uno…
Storage of Make It Snappy self centering hinge drill bits (model #: 40050) in a modern gridfinity bin
Remix of the linked cable organizer with added features to the model which make it snappy to the lock position. Print settings: - Material: PLA - Nozzle: 0.4mm - Layer: 0.2mm - Profile: 0.2mm structural - Supports: no Made with passion by…
2/8/2026: Updated the pictures of the model to show the various ways that i have begun using these. Added a shelled 2x2 - 4x4 SMD storage model. This uses 50% less filament and holds nearly double the components I learned that with my…
I printed the original files from AxMn on printables at 100% scale. I was having trouble with the horizontal vertical connectors pieces printing, so I beefed them up slightly to give it a couple more layers. Print settings/materials:…
This is a remix of https://www.thingiverse.com/thing:4093870/files I tried to post that URL for the original model section here but the automation decided it didn't like it so I selected the closest think I could to the actual model. Use…
The ERF Filametrix toolhead mod for the ERCF MMU calls for a specially sized #4 hobby knife blade. Since the blades are made of hardened steel, this seems like a very difficult thing to cut. However, since the metal is quite brittle and…
Avoid high infill density for the smaller part to keep sufficient flexibility. 10% worked fine for me.
Marker ring for Zombicide figurines. The rim is a little thicker in two place so that it snaps into place nicely. Works in PLA (if your printer is well calibrated). The hole in the bottom is for easier removal. Category: Toy & Game…
The doors in the original design sometimes fell shut unintentionally, because the fit was quite loose. To fix this, I added a small block to each doorframe to create a compliant mechanism so that the doors snap in the closed and opened…
Modeled using Blender to add to the arsenal of the Helldivers I bring the CM-09 Bonesnapper Helmet, the backside of the helmet is separated as the hole would be too small for a head to fit though so the back plate can extend out to assist…
Can you still hear the sound of a NES Zapper firing? It was 3 shots then and its 3 shots now for the Snapper. We at Frantz Foam Works hope you enjoy this remix in the same nostalgic way. Print the barrel slow and at least 0.2mm layer…
A Snapping Caterpillar. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Ethernet Label. Print in pairs and simply either snap or slide them together when it's on the cable. If you choose the right size then when it's on the cable then it has enough tension to avoid sliding on the cable. If it's not stable…
Inspired by several similar tools, I wanted to create my own, using laser cut acrylic. Works with any break-away, single row, 2.54mm male header pins, regardless of length, even right-angle headers. Inspiration: Break-Away Header Pin…
A snapper for IKEA wardrobes with sliding doors. I printed it with 100% infill with 0,2mm layer height using PETG. The gray snapper in the picture is an original part. In the second picture you can find a 2D scan, after I modeled the part.
Snappy the Crocodile Clip can't wait to sink his teeth into reducing food waste! Print off the two parts and use a short piece of 1.75 mm filament as the hinge pin. He works great in PLA and prints in under an hour at 0.2 mm layer height.…
Holds 3 extra darts in the barrel! Just flick the blaster down to chamber a dart to fire!
I've been looking for the perfect toothbrush holder, that can hold my brush suspended, so that it wont sit in stale water, that usually accumulates in the bottom of the toothbrush cup. The problem with this type of hanger is that it's…
This is nearly identical to the original blight token model by Daniel Cox , but the parts snap together and print slightly better (thicker features). Hopefully this will prevent them from falling apart when the PLA of the bottom part…
I've done it, everyone! I've reinvented the wheel! But seriously, this is just a simple model with a straight-forward design that seems to work well for my purposes, even if it's something I could have downloaded from dozens of…
can be used with the solder jack use ∅2mm pin/bolt as fulcrum for jaws or filament and heat/flatten the ends after inserting.
This is a practical bird feeder built using a Prusament spool flange and upcycled plastic bottles — Snapple and Ocean Spray both work. The Snapple version threads right in. For Ocean Spray bottles, I added a new adapter printed in…
Mark 35 Red Snapper inspired Iron Man Helmet Can double as the Mark 36 also Enjoy Category: 3D Printing
I did'nt have any plate to fixate this magnificent little robotic arm to. Therefore i desided to make a base for it. The base features removable legs. So that it will take up less space when stored aside while not in use. This is also…
A compact version of the Snapper 80 FPS barrel. The even shorter (snub nose) barrel for the Snapper reshell. Optimized for comfortably loading a single half dart and designed for vertical printing. I shortened the 80 FPS barrel, widened…
I replaced the pull ring with a comfortable T-Pull on the plunger rod of the Snapper reshell mod. I highly recommend printing the version with built in support! The files are already pre-oriented. My print settings for PLA: 0,2mm layer…
折った刃を収納できるカッターの刃折り器です。逆さにしても刃は出にくい形状になっています。 3種類あります。 ネジ止め式:推奨(M3 5~10mm皿ネジ 2個) ネジ止め式(インサートナット使用):頻繁に使う人用 封入式: 使い捨て いずれのタイプもプリント時にサポートは必要ありません。 A tool designed to break cutter blades and includes a dedicated case for safe disposal of the…
This is a small tool for snapping utility knife blades and contain the snapped blades in a safe way. Its a small container with a screw on lid, that has a narrow slit where you can insert the used blade of a utility knife to snap it off.…
Tor Schnapper, Schnellarretierung / Gate snapper, quick lock das Tor wird beim Aufmachen arretiert und bleibt bei Wind trotzdem offen.
Material: 9 g PLA+ / PETG Druckereinstellung: Layerhöhe 0,2 / Infill 80 % zick-zack / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein…
Squeeze the finger loops and this bony arm shoots out across the table while two skeleton hands snap shut on a sweet, a sock or a little brother's ear. Open your hand and it folds back up. Perfect for stealing sweets from the Halloween…
Like the design, but needed it for a smaller handlebar size (22.5mm)
Snappy is a super satisfying, compass-style snap-action fidget toy, which gives a satisfying click feel and sound as it snaps. Made from only 3 printed parts, Snappy is quick to print and very easy to assemble. You'll just need 8 x 5x3mm…
I'm modeling a bunch of Hydras because I was building a Zaxara deck and wanted some cards I had set aside to 3d Model so I wouldn't need to dig them out of the deck later. Guess what card didn't end up in my Zaxara deck. If you want to…
I really enjoy the original model for it's simplicity but noticed that the interior was chamfered and could cause my card edges to bend or sleeves to fray. For that reason alone I decided to throw it into TinkerCad and make it completely…
I had seen a couple of similar cable organizers but the dimensions where slightly off so the slicer had to add a lot of Gap Fills. This wastes time. The joints and snap fused together as well. With this model you can set your own…
Model by @TheSameNameTwice and slightly adjusted by me, so they connect together on nonmagnetic surfaces. They still stick to magnetic surfaces like fridges or the power supply of a prusa mk3 :) Magnet Size? The fitment of the square…
These are general purpose hard cases in 3 sizes. It features a strong snap to keep the lid closed. Three Sizes Available Small, mm: 212 L x 67.5 W x 47 H Medium, mm: 212 L x 97.5 W x 47 H Large, mm: 212 L x 127.5 W x 47 H Recommendations:…
Kooperationsprojekt mit einer Schule in Weingarten. Der LUGO Snappy druckt den Snappy der Schule aus. Firmware selber geschrieben Diverse Upgrades vom orginal Snappy 3.1 Projekt. Die Snappy Teile selbst sind auf einem Mk3 und Mk2.5…
These Ikea drawers are super cheap, metal, and cute. But they lack stoppers and handles. Alas, for a 3D guy, a new dream was born to tackle this problem. ... OK the truth is, they don't really need a handle, I just thought it was cute and…
This door was designed as part of a 3d printer enclosure and can easily be reused for any other hardware. The full documentation and assembly instruction can be found here: http://docubricks.com/viewer.jsp?id=839552638833285120 . It was…
A plunger with a bigger hole for the “Snapper” foam blaster . My fat fingers did not fit properly into the plunger, so I extended it a bit for a more comfortable prime.
(Note: The original file names in the folders are in Turkish. "Falçata ucu kırıcı - V1" translates to "Utility Knife Blade Snapper - V1".) Keep your workspace safe and your blades sharp! This functional tool allows you to safely snap off…
This little helper is very easy to print AND to use. All you need is the holder and two fins. You can use a little piece of 1,75mm filament as an axis for both fins. How to use (see pics): New toilet paper rolls have to be inserted from…
To organize most long cylindrical tools with a diameter < 30 mm I'm planning to make a longer and a short version soon. Don't hesitate to ask in the comments if you have any size requirments. Thanks @ JoeMalovich for the original idea :)
Use it to snap doors from outside
This is a cup and hoop storage system that I designed to hold the red snappers on my wife's handiquilter avante sewing machine. I had to put a bit of tape around the tab on the hoop part to get it to fit snugly in the Avante frame and I…
This is a simple deck box which prints in place and snaps shut! There's a slot in the front where you can insert an art card for flair.(Wink wink commander/fab players) This is a remix of Spellbound Prints' vertical deckbox design, but I…
Just a few minor changes to allow it to be alot smoother of a trigger, small dimensional changes and making the part that interacts with the catch smaller as I found that caused too much friction causing the trigger to stick and jam. Here…
I spend a lot of time tweaking my printers, and I'm constantly on the lookout for models that give me a decent idea of how well the printer is functioning. While cleaning out some old prints, I found dozens and dozens of calibration cubes…
I added a keyring to the top of the tall version because keychains :)
Order in your toolshop, on your shopfloor. I found this set of fitting tool boxes few years ago. I mostly use these. They are available from many different brands. Here my earlier designs:…
Use any color/filament you would like. Remix and experiment with different models. Make sure to use at least a .2mm resolution because it might snap off easily.
I thought the experience of using the poop bag roll could use some polishing, so I made this
The goal was to create a version that was even smaller. To achieve this, the shaft was modified to be even shorter and have only two digits.
Meet the Spiky Snapper , a cheeky carnivorous-style plant with a grin full of teeth and attitude to match. A fun Halloween accent, gothic desk buddy, or gift for horror-loving friends, it’s small enough for shelves yet bold enough to…
Since my magnet snapper of the screen door cracked, I drew a new one in FreeCad. I am very happy with the result and assume that it will last again for years. I have also included the .FCstd files so that you are in a position to modify…
PLA or PTEG Layer height: 0.2 mm Infill: 20% Supports: None Brim: None Printed on Prusa Mk3S Just print as many as you need and snap ‘em together.
Use any color/filament you would like. Remix and experiment with different models. Make sure to use at least .2mm resolution because it might snap off easily.
A simple case to store your bobbins, I found they fit nicely on their side at the bottom of my sewing machine storage. I designed a stacking variant as well, but I was happy with the normal ones already. I recommend using transparent…
This is a tool to quickly size a snappable pin header to a desired length (2 to 13 pins). It is for standard 0.100" (2.54mm) pitch pin headers. I've been using arturo182's pin header break away tool for many years – this is clearly…
This variant of a Logitech K860 ergonomic keyboard foot comes with a flex. Quite literally. The "legs" are bent outwards by 3° each, giving it a perfect snug snap fit into the keyboard. This fixes the problem I've had with the other…
Replacement for door window snapper of the AUBI brand. (Balkontürschnapper AUBI) Category: Replacement Parts
All part can be printed without supports and without color change mid print. You only need red,green and another color filament. tolerances are critical for a smooth snappy operation of the checkmark switch. No glue or screws are needed,…
Intro Snap and stack these little crates together! This tiny snappy crate clicks together satisfyingly, with a lid that also snaps nicely in place. Use it as a fidget, or a nice display item in your garden! Print Settings Reccomended PETG…
Holder for the Snappy Tools Countersink bits 3/32", 7/64", 1/8" and 9/64" Printed on Prusa MK4 with Jessie PLA Red Ice from Printed Solid I am using the Input Shaper which prints at .20mm layer height. I also did a color change before…
![#0065 Hard Case with Strong Snapping Lid [3 sizes]](https://media.printables.com/media/prints/469287/images/3849705_5fccbb2b-a7da-4684-a0d2-6311b425252c/rl-20230423-002.jpg)
![EXTENDED Hex Pencil cap for snapped pencils (10pcs) [2X TALLER]](https://media.printables.com/media/prints/301014/images/2632520_750a34c3-c35c-4fbc-bf9c-2f59f848a35c/screenshot-2022-10-23-141452.png)
