Liczymy pasujące modele…
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
Wydruk około 2,99 €–3,65 € nettoWstępna wycena jednego wariantu
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 1 Pack N° 2 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An amplifier for your phone. Makes a noticeable difference in increasing sound and enriches the usual 'tinny' sound that your phone speakers give off. I was able to measurea 5-6% increase in volume. The amplifer should suit most modern…
Wydruk około 10,56 €–12,91 € nettoWstępna wycena jednego wariantu
Spell Templates to measure distance and Area of Effect for Tabletop Games like Dungeons and Dragons or Pathfinder. The template makes it easy to see which monsters/players get hit by an AoE Spell. No more counting squares or moving minis!…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu
Print-in-place tape dispenser. Almost takes no more place than the tape-roll itself, so it can fit in your pocket. No supports required. Tested with PLA and PETG, may also be printable in ABS and any other rigid materials. The design…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updates: 2/23/2021 - NEW v2 MODEL! Increases overhang length, makes the cones more pointy, adds support to the microcylinder on the left so it does not wobble and cause false testing, and also adding some other new windows and holes. Also…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
A Custom-Designed Dispenser to fit Pokémon Booster Packs up to x43 packs for the single dispenser & x86 for the double dispenser lid is optional depending on your needs. The Dispenser prevents damage to booter packs, warping & UV…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Hi, I'm an amateur “bastlíř”. I'm the proud owner of a 3d printer i3 MK3S+ and I want to find out the limits of this printer and how else than 3dbenches. I want to share this experience with you. For each version I always write its pros…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…
Wydruk około 7,24 €–8,85 € nettoWstępna wycena jednego wariantu
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N°1 Pack N° 3 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Zesilující stojan pro mobily. Výrazné zesílení zvuku, viz video. Odzkoušeny telefony s celkovou tloušťkou včetně krytu 8.5 - 9.5mm a šířkou do 79mm. Vejde se i na Prusa MINI, jen je ho třeba pootočit o 45°. Doporučené tiskové nastavení:…
Wydruk około 15,37 €–18,79 € nettoWstępna wycena jednego wariantu
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the great model by @ KaliM. UPDATED VERSION v3 on December 1st 2024. Changes : Walls are thicker (3 layers) Vertical hole at the front is bigger: easier to guide tablets going in Hole to retrieve tablets is bigger (vertically &…
Wydruk około 4,43 €–5,41 € nettoWstępna wycena jednego wariantu
The stand should fit the majority of the 8 wide speed champ cars. It's just wide enough to fit the McLaren Solus GT on the bottom and the Merc F1 is too long for the top to give you an idea for scale. The tabs on the ‘Car stacker plate’…
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
couldn't find a good pop up dispenser for sticky notes (the ones that come zigzag) So designed this simple dispenser. At first I left both sides open but since the top part with the opening weren't connected to the bottom it was very…
Wydruk około 3,31 €–4,05 € nettoWstępna wycena jednego wariantu
Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…
Wydruk około 5,66 €–6,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Unser Quark ist immer alt geworden, da es keinen richtigen Deckel gibt. Ich habe einen simplen slide-on Deckel entworfen. Sollte dieser nicht passen, schau mal hier vorbei (Neuere Version):…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Diamètre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 2 Pack N° 3 Pack N° 4 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Nuka Cola Dispensary / Vending Machine. Make it into a piggy bank. Or use it in the dice tower contest. I find this model very satisfying to look at. I think I am a sucker for Nuclear Age style artwork.
Wydruk około 19,01 €–23,23 € nettoWstępna wycena jednego wariantu
Automatic cat Feeder I added a lid after some users asked for it, you can find more lids from other users in the comments as well as in the remixes. Use at your own risk
Wydruk około 27,14 €–33,17 € nettoWstępna wycena jednego wariantu
This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
A cool looking phone stand with a passive speaker! This stand amplifies the volume of your phone speaker. It is also possible to charge your phone while listening to some tunes! The socket is slightly angled, so you can use your phone…
Wydruk około 14,43 €–17,64 € nettoWstępna wycena jednego wariantu
This is a remix with the universal hooks for the Ikea Skadis pegboards.
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
These are created just for fun. They would be the bolts needed in special situations like having drilled the hole twice, off center, too large at first ect. Each file is named with a description of how the bolt would be used. The bolts…
Wydruk około 9,30 €–11,37 € nettoWstępna wycena jednego wariantu
This is a bridging test that won't waste loads of material and prints in 20 minutes. 2g of filament gives you about 100 bridging extrusions, each a different length, from 2 to 200mm. Print with 1 perimeter.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Works with both Prusa SL1 and SL1S Speed printer. The Prusa SL1/S Speed Drip Adapter holds the build platform at an angle to allow excess resin dripping of the platform and model. The fixture is rigid and frees up both hands to release…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ich habe den Batteriespender auf thingiverse gefunden. Mir hat gefallen, dass da auch ein Deckel bei war. Den Spender habe ich mit Support gedruckt. https://www.thingiverse.com/thing:4752641
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Deutsch: Wenn eine Wespe kommt und sieht das fremde Nest, dann verzieht sie sich in der Meinung, dass da schon ein Wespenvolk angesiedelt ist. (So ist zumindest der Werbespruch). Skalieren Sie wie gewünscht, ich druckte es mit 90%. Nutzen…
Wydruk około 6,88 €–8,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 1 Pack N° 2 Pack N° 3 Pack N° 4 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This is a remix of Cmdr_Falken's design ( https://www.thingiverse.com/thing:4393430 ). Huge thank you to the original design! I decided to break the original design into three rather than two pieces, reducing the need for supports. The…
Wydruk około 4,40 €–5,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Specs Holds bag rolls up to 35mm diameter, 65mm wide. ✅ AmazonBasics ✅ Frisco … and many others! Print tips 🧩 2 parts: Main body and “pin”. Print separately for cleanest finish. ⮑ Print body left side down. Print pin upside down. ✨…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Diametre 9 cm - Epaisseur 2 mm / Diameter 9 cm - Thickness 2 mm Pack N° 1 Pack N° 2 Pack N° 3 Pack N° 5 Pack N° 6 Tout Noel JT3D - All Christmas JT3D
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
I got a new Nespresso machine (Vertuo) for my birthday. I have decided to rint my own dispenser for the pods. I wanted something useful and easy to print. The model comes with 2 parts: Bottom and Cover. Those parts can be fit on a Prusa…
Wydruk około 4,54 €–5,55 € nettoWstępna wycena jednego wariantu
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This remix is based on frez_knee/bandslinger's dog bag container with the Flexi hook moved to a position that allows access to the bags from the side of the leash (rather than underneath) “Left” and “Right” versions are based on which…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple, "classic" speedway motorcycle wall decoration. The gcodes are for 0.6mm nozzle. Stl/3mf may be added later.
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Following the original recommended print setting For PLA/PLA+ (0.2 Layer + 3 Walls + Infill 15%) Support depends on the orientation of the prints. The GCode files have enforce support for only the U shape part.
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
5mm design update from the previous high-speed remix - RC2X Currently in use at GP surgeries around Portsmouth, UK and community keyworkers. We are producing about 100 a day on 4 printers Revision 1 • Modified width to be compatible with…
Wydruk około 5,14 €–6,29 € nettoWstępna wycena jednego wariantu
I couldn't find a “key” that had both parts on it, so I sketched this one up
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
See my new improved version at https://www.prusaprinters.org/prints/74621-tape-dispenser-vers-td3-for-blue-and-shipping-tape A bench mountable tape dispenser for 3-inch wide blue painter's tape. Also works with 2-inch and 1-inch tape.…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
June26 re-design note. @s0ren reported that in his print of the 8 can holder, he had problems removing cans (removal aperture not high enough). He had printed in PLA, I had printed in PETG, perhaps there was a difference in shrinkage…
Wydruk około 3,20 €–3,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 3D model of the world's first chiral aperiodic monotile. “Chiral” means “handed” -- same as left and right handed screws you can't transform left into right just by turning the object. It's an update to…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
Einfacher Sperrschieber für 2" bzw. 50mm HT Rohre. Bei den bisher gefundenen Sperrschiebern sammelt sich immer wieder Staub im Verschluss, sodass dieser sich nicht mehr ganz schließen lässt. Dieser Schieber ist durchgehend und schiebt…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my third attempt at a 2 speed automatic gearbox and it's been delaying my Unimog RC project for quite some time… You won't see attempt #2 because it didn't work… The clutch would break (too) soon, so I gave up and tried something…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
I was after a grid for my Canon 580 EXII speedlight, but none of the ones I could buy really appealed to me. They all seem a bit “clunky”, held together with magnets, rubber bands or Velcro. I figured there had to be a neater way. These…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Had success printing it in ABS, PETG was to weak and snapped.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
I created that shooting patch dispenser to replace the standard paper patch dispenser while they get wet and don't work very well after a while. In case the lid is not holding as expected, a small tesafilm strap can be used to secure body…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Diametre 9 cm - Epaisseur 2 mm - Soyez prudents en les decollant du lit, certaines parties sont assez fines Diameter 9 cm - Thickness 2 mm - Be careful when taking them off the bed, some parts are quite thin Pack N° 1 Pack N° 2 Pack N° 3…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…
Wydruk około 8,66 €–10,59 € nettoWstępna wycena jednego wariantu
I present to you fully parametric boxy things dispenser - update from my previous model now with view port and lid. You can use it for anything with boxy shape, I use it for dishwasher tablets. Saves space and I can't get over how…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena jednego wariantu
Speedometer Clock Inspired by analog dials of a retro motorcycle. It shows time in hours and minutes in a pair dials which resembles a tachometer and speedometer. The time is fetched from the Time Server and constantly updates it. The…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This is a variant of the Gosper curve which forms a closed loop. Inspired by an idea shared by @Ema that used a different subset of this curve, I wanted to investigate what the space filling hexagon looks like inverted. Multiple copies…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
A handy travel sized toothpick case/dispenser. Note: The optional cap may be printed in Vase mode, using an extrusion width of 0.8mm 2023-07-09: Added another version with a combination image & text. 2023-07-10: Uploaded some optimized…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Vase with Winged Griffins by Prosper Jouneau
Wydruk około 19,60 €–23,95 € nettoWstępna wycena jednego wariantu
Choose between 8 funny Keychains or Tree decorations of Simon's Cat Show 23/11/2025 - Add 1 missing design (Number 8 - Cat in a red sock) NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Please like and follow and post your makes This is a speaker redirector for the Xiegu G90. It was designed to be held in place by the G90-H1 bracket, but tape would also work. I made the redirection cone much shorter than the original…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
A wipe or condom dispenser that can be mounted on a wall or a SKÅDIS pegboard. This model mainly draws inspiration from Condom dispenser and Condom or wipe dispenser with lid & holder but is completely redesigned from scratch to hide the…
Wydruk około 11,87 €–14,51 € nettoWstępna wycena jednego wariantu
This is the second stage gearbox I'm designing for my Unimog RC project. The second photo shows my UNIMOG RC assembly in progress… While the first stage (to come) is a classic ( fixed ratio ) gearbox with a ratio of 5.5:1 (meaning that if…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
What? A onehand operated tool that can squeeze a stick of churu or whatever liquid pet treat you wish, into a spoon that can be slotted into the device. Much like the ones you find on amazon: Why? You need the other hand to groom or wash…
Wydruk około 12,84 €–15,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
FA CTU brings a design that matters. This student-designed menstrual product dispenser was adapted for 3D printing to be accessible, easy to produce, and ready to use in schools, offices, and public spaces. The model is based on a design…
Wydruk około 7,53 €–9,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 12,99 €–15,88 € nettoWstępna wycena jednego wariantu
For those who either have less kitchen space, or less taste in coffee…
Wydruk około 5,18 €–6,33 € nettoWstępna wycena jednego wariantu
Simple Tape Dispenser inspired by Prusament Spool design Very simple dispenser for basic tape. Iťs designed for tape with total radius of about 5 cm, inner radius of about 2.5 cm and width 2 cm. But as you can see, there is some space…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
This speedboat floats upright with no change of infill and the hull is optimized for speed. This boat is also really stable when it is not moving or moving slowly because how how the hull is designed. This model does require support. The…
Wydruk około 2,59 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
I needed a container like the fish store uses that can hang on the side of my tank. This will be useful for acclimating new fish as well as a place to hold fish while performing certain tanks maintenance tasks.
Wydruk około 9,48 €–11,59 € nettoWstępna wycena jednego wariantu
The challenge I had was that my plackers comes in a plastic bag packaging which is hard to store in my bathroom cabinet and risks falling out whenever I open the cabinet doors. The idea is to create a convenient dispenser thus eliminating…
Wydruk około 4,92 €–6,02 € nettoWstępna wycena jednego wariantu
Un clip et deux versions de crochets pour suspendre des balais, des pelles, … bref du rangement / one clip and two versions of hooks for hanging brooms, shovels, ... more and more storage
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
I just needed a way of storing my Isopropyl cleaning wipes. I looked around on Thingiverse did not find anything that matched what I wanted, so I quickly made some measurements and created this storage box / Dispenser. The Swabs Measure…
Wydruk około 3,44 €–4,21 € nettoWstępna wycena jednego wariantu
Shave ~25 minutes off a stock Prusa MK4S 0.25 SPEED 3DBenchy. This project file has many performance changes so you can hit ~10 minutes while staying SpeedBoatRace-compliant (standard materials, ≤0.25 mm layers, two walls, 3 top/bottom,…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
[EN} Anatomically-correct model of an Esperanza bug. Legs were modeled thicker for printability. I recommend using brims to help legs adhesion to the print bed. .3mf file includes paint-on support to limit support on overhangs. If you're…
Wydruk około 2,76 €–3,38 € nettoWstępna wycena jednego wariantu
“Gyro the Dodo - Ultimaker Special” is an awesome test print originally developed by an artist named Virtox to show off the capabilities of Ultimaker printers. After building my MMU3 and ordering some BVOH for soluble supports, I was…
Wydruk około 22,14 €–27,06 € nettoWstępna wycena jednego wariantu
Hello there! As I was upgrading my manufacturer sound system in my BMW E46 I noticed the original speaker covers killed a lot of the sound. After some research speaker covers with honeycomb design turned out as a good choice, as its…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
“Years ago" Inspired by all kind of clever solutions at the time, I designed a dispenser for 330ml cans which printed in only 4 pieces on my BIG 3D printer (~450mm x 450mm x450mm) which rests in piece ;-( Luckily the local brewery decided…
Wydruk około 4,07 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are cases for the VGA or HDMI version of the ZX Murmulator ZX Spectrum emulator PCB. I made it from a generic case design imported into TinkerCad and very extensively modified by scaleing and adding components and cutouts to fit the…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu
For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
!!! To avoid scratching the frame, it is best to line the center with something soft (old handlebar tape, bicycle inner tube). !!! Maximum pipe width 40mm, height depends on the screws used (you can print) Sample link:…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you make this model and like it, please post your make and rate the model, that would make my day! This counting tray works with any size pill provided it's round and uniform. Put some pills on the tray, swirl the tray around in a…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
This is a special winter edition of the shopping cart coins. This is your ticket to use your shopping cart. You can keep the chip on your keychain, inside your pocket or in your car :) Or even better, you can hang the chips on your…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Die Auffangschale hält den Platz um die Kaffeemühle sauber. mit PETG gedruckt Ich habe auch die entsprechende stl-Datei hinzugefügt
Wydruk około 2,32 €–2,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Features Easy, moderately quick print Quick one-turn screw on/off lid for easy filling. Lid rotates a small amount to open and close the dispenser hole. Knurled edges for easy grip. Assembly Assembly is very easy – just snap the top onto…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Artistic and ergonomic tape dispenser designed for office use. Compatible with usual office tapes. New GGvision studio creation.
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…
Wydruk około 8,40 €–10,27 € nettoWstępna wycena jednego wariantu
I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…
Wydruk około 3,52 €–4,31 € nettoWstępna wycena jednego wariantu
Description This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place. The dispenser is…
Wydruk około 12,51 €–15,29 € nettoWstępna wycena jednego wariantu
I added the Krk color in the the gcode file Black White Yellow
Wydruk około 12,85 €–15,71 € nettoWstępna wycena jednego wariantu
Optimized for PETG with 0,4mm nozzle and 0,2 layer height. Happy printing!
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a speed square I designed. It has measurement increments of ¼" with numbers every inch. It also has angle measurements every 15 degreed and labeled on one side. Edit: Model can be printed vertically for better clarity on numbers…
Wydruk około 5,27 €–6,44 € nettoWstępna wycena jednego wariantu
This comes with a slider for 0.5 mm beads but I can made additional sizes on request.
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
I recomand scale 77% x 77% x 70% 17.3.2022 - Release version 1.0 29.3.2022 - Updated version - bigger pipe and better stop
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
