Liczymy pasujące modele…
Go to https://www.patreon.com/lilykill to support the original creator. Materials selection: Handle - I recommend a wood-filled PLA, but not the Bamboo powder ones. They're too light. I used a walnut filled PLA to get a darker finish,…
This can be used to test/use gadgets which require a Burg Wächter ME/2 or similar inline lock. These are very helpful for integrating a locking mechanism into 3D-printed models and there are already many models available which use this…
Flintlock Pistol for Carnival On the search for a matching gun to my carnival costume, I was unfortunately not found. So I created myself from several models that I could find myself a suitable. And have designed this beautiful Flintlock…
This is a remix of an older model by Mieszko Lacinski . I did some cleanup of parts that didn't fit together, and modified for easier printing. Separated the dragon head at the base of the hilt into it's own piece. Combined some of the…
Giant Brick Pirate Flintlock Pistol (x10) Print two part and two join
Straight twist lock oil funnel. Originally designed for 6.7 powerstroke in a Super Duty. Probably will work with other ford engines. Printed in PETG. 3 layer wall thickness 30% infill
I designed this. printed the handle in two parts and used the pin to help hold it together. I ended up printing this at 80% so that it fit my hand so you may want to check that out. Everything printed fine and fit together no issues.…
This model is compatible with the lego system.
This is a Dyson Airwrap wall mount station that can be used to hold the wand and 4 accessories in a simple and secure twist lock configuration. This mount consists of two parts: A wall bracket that you can fasten using your choice of wall…
45 degree twist lock oil funnel. Originally designed for 7.3L godzilla in a Super Duty. Probably will work with other ford engines. Printed in PETG. 3 layer wall thickness 30% infill
I ended up needing the Yellow adapter when the original file was the Blue adapter. Old deadbolt had the Green adapter, so I mocked it up as well.
The inside base of a TLoc systainer has raised cross parts. I needed it to be flat and level so I designed some pieces that sit nicely right on top. I printed mine in Bambu PETG CF at 0.2 layer height. There are 5 connectors (print 4…
Printable in 16 parts and built around a simple elastic band mechanism for the hammer and trigger. Designed so each part can be printed separately in your chosen colours. Assembly requires: An elastic band Glue Patience Tweezers (helpful…
This is a two-part system for 4" dust collection found on most woodworking power tools. The pieces are easy to print and create a soft locking mechanism that allows you to quickly transfer from one tool to another but still get a positive…
Tisk: Vrstva: 0.2 Perimetry: 4 Výplň: 20% Gyroid Materiál: Dle místa užití (PLA, PetG, ABS, ASA…) Těsnění je nutné tisknout z pružného filamentu, například TPU
I like the flush two color look. The sets I have are the sets I use, if you have anything specific, send me a message and ill try to make additional. set includes: SAE, Metric, adapters/ Union joint sockets, spark plug socket, Torx, and…
Command the high seas with this striking Female Pirate Captain display model, sculpted in a confident, battle-ready stance. Wearing a flowing long coat and classic tricorn hat, she stands firmly with one hand on her hip while holding a…
You will need 2 screws approximately 1 cm Two models: 18.5mm 21.5mm if you use metal spacer
Be a pirate Works on all 13 bots Supports required
The AR-15 BoltLock is a practical protective device designed for AR-15 upper receivers. It fully encloses and secures the bolt carrier group, protecting it from dust, dirt, and damage during storage and transport (not intended for…
Ever wanted to setup a Victorian duel between your friends? How about a pirate boarding battle? A cosplay prop for your renfaire outfit? Or just a historical desktop fidget? Firing Video! Design Video Designed after a 'Queen Anne' pistol…
Transportlock for SRAM G2 brake if wheel is disassembled. Prevents brake pads to get lose.
Infill 10% each. approx 6 hrs to print on ender 3 w/ .6 nozzle Needs supports Feel free to edit and remix.
This model is meant to roll 2 standard D&D dice at a time. You load it by pull the trigger back, front load the dice, resetting the trigger, and then you pull down to release the dice onto the table. The size of the model is the…
Footlocker and beds, presupported for resin printers! :) Category: Games
I would have liked to take the original product from Kytor directly, but shipping is extremely expensive outside US. So I used another model from Kytor as the basis for a scart holder I converted myself. (Thank you guys for the great…
All details and official models can be found at https://twystlock.com
I made this for my K1 Max, should fit other Creality models which employ the same twist locking mount design. Prints as 3 pieces (Tray, Roller and EndCap). EndCap prints flat (no supports), Tray and Roller print horizontally with tree…
Best in brown or orange filament normal is for action figures and large is for, well I don't really know you can choose.
I love the dungeon blocks system! However I have several pains with it: You can't use smaller than a 3x3 grid To get bigger grids that tile properly, you need to go up in multiples of the 3x3 You have to adjust the location of the grid in…
So last year I've bought the Nuki Smartlock Pro 3.0 It worked pretty well but lately started to skip steps when unlocking the door. I determined the issue to be the main gear (the one that also holds and turns the key), which over time…
I wanted to make a classic flintlock pistol out of cardboard one day, and was disappointed when it didn't work. I hopped onto tinkercad, and decided to try to make one that I could 3d print, for a little more durability and consistency.…
I have a TTLock compatible smart door lock and I wanted a way to keep my Hornbill G2 TTLock Gateway off the ground and tidy. So I made this simple mount. It can be mounted using command strips, double sided tape, velcro, etc. Since this…
This is a 500% upscaled display dart that I modeled completely from scratch, inspired by the general shape and grip style of the Simon Whitlock 2 steel-tip darts. No original logos or trademarked elements are included. The model is split…
Matlock - Benjamin Leighton Matlock - 1986-1995
Matlock - Charlene Matlock - 1986-1995
This “foot” for the switchbot smartlock allows it to be placed in the correct position to turn the mortise deadbolt despite the door hardware making fitting a traditional deadbolt type smartlock difficult. Its basically a square with a…
Overview Tired of your sandpaper slipping like it’s got commitment issues? GritLock locks it down—no foam, no fuss, no shifting. This flexible TPU insert drops into your sanding jig and grips like a champ. No glue, or mess needed but hey,…
This locking mechnism allows you to secure your PET preform using a padlock. Good for multi-staged caches or lockpicking caches. You will need 1 M4x30 bolt and 1 M4 nut for assembly. Legal notice: The geocaching logo used in this model is…
Its a small Adapter for Oval Locks.
In case your Nuki SmartLock (not the pro version!) is exposed to the elements, this enclosure keeps it dry. It is not IP-rated, so use at your own risk, but mine survived an exceptionally wet winter and spring here in the Netherlands, so…
I wanted to use my GoPro for timelapse video of my MK3S+, but I didn't have a good solution for mounting the camera on or in my Lack enclosure. I had already printed jakejake's TwistLock Clamp as well as his Hand-Screw Clamp and had seen…
I originally made this model for a game, but the development never went ahead, witch means its not very optimized for printing
Matlock - Julie March = 1986-1995
Steering pedestal compass might missing the cover. Over the time needle housing globe gets dim because of the weathering. Plastic polisher you can recover unit in few minutes, so you don't need to get new one. This cover might suit also…
This set contains the Dungeon Blocks XL grid but using my Slotlock system from so it can be moved to any position in your grid. While I plan on adjusting the bottom of each XL base so I only need the one grid and I can position them…
Matlock - Tyler Hudson - 1986-1995
My blue adapter snapped so I printed off a few but struggled to get the adapters to fit well - either the hole was a bit too big and the fit was a bit loose or it was too small and the turnpiece would not fit even when I had measured the…
Designed to be printed in TPU at .12 - .15. Fits snugly in automag twistlock barrels.
Keep curious kids and nosy pets out of closets. ClosetLock is a simple, effective way to secure sliding or bypass 2x closet door setup using a drop-in “key” that jams the doors shut against each other. Just drop it in to lock—and lift it…
Here is my improved border that works with any configuration of my Dungeon Blocks Slotlock grid system: Regular: https://www.printables.com/model/1559317-dungeon-blocks-grid-slotlock-adjustable-size-and-p XL:…
The brass brushes I bought from Amazon (AU) were a little too long for the original model by @ewr2san, so I moved the holder portion down by 3mm. I also extended the little ridges inside the bottom of the model. I found that by doing…
Twistlock for Quokka series UPDATE 2019: i added a printable version of the Mount UPDATE 2019: Backplate 10x10cm added , i would recomend printing this one close to 100% infill + support the mount should be printed at 0,2 or thinner…
Lego flintlock at 10x the scale. Most of the measurements are accurate, but some are not. I recommend to print the split version and glue the two parts together. Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1…
All details and official models can be found at https://twystlock.com
Hold your common 3d printer tools on a compact low profile and easy to swap holer! Print without supports. Place the twist lock anywhere on the 3030 extrusion!
I remixed the "Base_Card_Deck.stl" from 3D Printy my magic the Gathering deck. The box easily fits 100 sleeved cards plus sidedeck. I would use the “Support on build plate only” function of your slicer for printing these modells. Update:…
A handle designed to fit in the hand-hold on a Sterilite 1842 footlocker (https://www.sterilite.com/product-page.html?product=18429001&mid=224) to allow it to be pulled on its wheels more comfortably. Makes it much easier to wheel the…
Hey there here you have my little change to the quadlock system. I made it possible to glue it onto a cast. Because like in my case i had a Motorcycle accident and am now stuck at home with a carpal bone fracture. And holding my phone in…
Print-in-place LightLock Clip Snaps over two curtain edges to close the light gap. Rounded ends prevent snagging and the slim profile lets the panels glide on the rod. Fit variants (mouth opening) TightFit 0.50 – very snug; harder to…
I printed the whole box at 170% size, so it may be, that the models are to fragile to work on 100%, if so I am sorry and please let me know, so that I can write a disclaimer If you love this design and want to see more fun projects like…
Rain cover for some TTLock Door Access Controls: - TTLock CF3 - TTLock CH3 - TTLock HF3 - TTLock H3 Printed in PETG with 20% infill.
Thickness 8,9 mm so when you need it thicker or thinner und can change the Z in the Slicer. Fits EVVA door plate which is 54mm wide and 9mm thick.
TTlock G2 Gateway wall mount holder
For the perfect card storage I recommend the size "Base_Card_Deck.stl " for the box, you can fit a deck with 100 cards plus a sidedeck and sleeves loose in it, also I recommend the "Long Latch.stl " as latches, because it can be with the…
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- If you found this helpful, please give it a like - it really helps! Even if it wasn't perfect, leave a comment…
Ninja mags but with a twistlock pin to retain the baseplate instead of an m3 screw and heatset. Also added extra witness holes for more visibility into the follower position and adjusted the baseplate geometry to get rid of slicer…
This is a custom adapter for some kind of ABUS Securelocks for the Switchbotlock
das Gittertor ist meistens schmaler als Eingangstüren, deswegen muss man die Zwischenräume ausgleichen. Die Stärke beträgt 12mm, gedruckt aus ASA-CF
The two hooks can each be reinforced from behind with an M3 x 16 mm countersunk screw. Screw the screw directly into the plastic. For mounting, simply remove the existing screw in the middle and replace it with a flat M4 x 6mm cylinder…
i had the problem that the switchbot pro didn't hold tight enough on my door. Because my lock is not flat on my door. The lock is about 10mm high and it is only a small round area. So the original plate didn't hold tight enough because of…
Material according to the location of the reader. Ideally ASA, but PETG or PLA is also possible. Printing without supports. Installation together with the metal base of the reader.
I have created the bolt locker with cap based on the design of SilverTripple for the column lock of the Dremel Workstation 220. This will makes the adjustment of the vise tool less. Printed in Bambu Lab PETG-HF filament with the settings…
A low profile version of the original Multiboard Snap - Twist-On Multipoint Mount. Can be used to mount Multipoint accessoires flush to your Multiboard.
A blunderbuss with working hammer and ramrod. It comes with a powder flask and ammo as well. You can edit the model to however you like and can turn it into a Musket by removing the barrel tip, a pistol by removing stock and barrel,…
Prevents nuts from falling out of the "nut-trap". After a couple of tool change nuts became loose and fall off, I had to remove the nut trap to get them in again. Quite annoying, so with this mod nuts should stay in place. No need of…
Use any mount designed for Sy's Peglock on slatwall. I have two different sizes, a skinny and standard. Tested on the wooden slatwall, not sure about other types of slatwall.
Brick Flintlock (1000% scale)
Рекомендуется изготовить из PPA-CF от Siraya Tech и дозакаливать при температуре 110 градусов 4–8 часов в кварцевом песке фракции 0.1–0.4. Оригинал - https://makerworld.com/ru/models/630162-liftlock-longboard-handle#profileId-554974 It is…
If you try to print this in something other than flexible filament it will break eventually.
Gridfinity Halter für QISF Vierkantlochbohrer Set (12,7/9,5/8/6,4mm)
Attachment for a worm motor with a D Shaft with dimensions of 6mm diameter and 5.4mm until the D of the shaft. It is used for attaching a key to make a smart lock. Category: Machine Tools
Withlock steering pedestal lock The clamping device on this cobra whitlock failed. SV Lotus reached out to me to see if I could get this fixed. Not only did we make a new part we improved the design for extra strength. The broken part was…
This is a twist lock mechanism rather than the usual magnetic ones because "somebody" likes to angle grind in the workshop...
Remix from @DrJones : 7-day pill box with a compliant twist lock: Press the center, then twist the lid. https://www.printables.com/model/756275-pill-box-with-compliant-twist-lock
My Scott Spreader twist lock broke where the trigger wire attaches to the base. This is a replacement for it. I screwed a course screw into it and was able to finish the yard. I have no long term testing on this fix to see if it will…
Kwikset Halo Select and Halo Select Plus lock cover to protect the lock from direct sunlight UV's. https://www.kwikset.com/products/detail/halo-select-touchscreen-wi-fi-and-matter-enabled-smart-lock?variant=9800-wifi-thrd-tscr-15 Given…
Internal filament spool holder for the Elegoo Centauri Carbon 3D printer, for spools with an arbor hole diameter of 55mm, and a maximum spool width (default is 70mm). It is designed to be permanently installed, and the original spool…
TwistLock – Quick-Change Shifter Knob System for Thrustmaster TH8S One base, many hands. TwistLock is a bayonet (quarter-turn) mounting system that lets you swap shifter knobs on your Thrustmaster TH8S in seconds, with no tools and no…
i needed a raincover for the display of my Loqed smartlock because sometimes in rain and wind the door opened itself. i found this doorbell cover https://www.printables.com/model/953199-doorbell-cover/files and resized it to fit the…
A lock mount for the smart NFC bike lock 'Serea Swift' with a 62 mm mounting hole spacing. The chain is inserted into the holder from above, the plastic part of the lock is pushed down, and the lock is secured to the bike frame. Enjoy…
Hi y'all! I made a DIY Home Security Door Reinforcement Lock (HSDRL) unlocker for my room door so that I can lock it and unlock it from the outside. I installed this boltlock thinking it would prevent people from coming in, but if anyone…
So I was making the flintlock pistol below and wanted to make it easier to paint so I designed a couple of little things to help. https://www.printables.com/model/1008648-flintlock-pistol-prop-with-functioning-action Trigger Plate: goes…
M3-M16 Gewindebohrer Halterung für Standard Lochwände
Twistlock dustport for tablesaw Outer diameter of 57mm with a tapered fit, designed to fit the "2inch" outlet.
Kwikset 916/918 Smartlock cover to protect the lock from direct sunlight/UV rays. https://www.kwikset.com/products/detail/918-homeconnect-traditional-electronic-deadbolt-with-z-wave-technology?variant=918trl-zw700lr-smt-15 The cover…
65mm inner diameter port for Metabo DH330 thickness planer. The extraction port would work with my other 100mm bandsaw adaptor but this one tapers inward nicely and saves some material.
Sometimes you need to get that hose right up on your lathe work for sanding or small chips. The flat base can have a larger shroud glued onto it to help catch more debris but I find the 100mm hose to be sufficient for my work. A magswitch…
