236 modeli
I made this Raspberry Pi 4 OctoPrint case mount for Prusa i3 MK3/s frame. The bracket is merged to the meshed bottom of the case and fits exactly on the m3 threaded holes in the prusa frame. You can find suitable housing tops from me Haz1…
This is a modification to the Original Prusa I3 MK3/MK3S Einsy case that implements appropriate housing for a Raspberry Pi 1B+/2B/3B/3B+/(4B - Now available as the first download ). This part allows for one of the aforementioned Raspberry…
Designed for Octoprint If you are looking for a nice Octoprint case, this is right for you. Also, RaspiCam is supported! Updates 01-16-21: New version available! All suggestions have been accepted and implemented in the new version.…
This is a fully 3D Printed Stirling Engine made by New Zealand ProjectsToPrint (now defunct). It only requires a printer, printer materials and a few basic home tools and materials to make. It is powered by hot and cold water. This does…
This item is a replacement for the bottom of a Geekworm Heavy Duty Aluminum case for RPi4 which mounts to the back on a Prusa MK3/S frame above the electronic box. The Geekworm Case ( Amazon US ) is a generic, inexpensive aluminum case…
prints in 0,2 use lower for detail 0,3 for more rough as of paint brushing Standard color as you like Drybrush some stones HAVE FUN MORE stones search my modells Terrain or DND ! PLEASE Like Some of my Portals and stone designs ! while…
LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…
An adjustable side mount for the Samsung Galaxy A50 so you can run Octo4A and make great timelapses with Octolapse. If your phone is in the same dimensional ballpark as the A50, it will probably fit as well. If it doesn't, I've included…
I mixed the mount arm I liked with the case I liked for the Prusa MK3S and Raspberry Pi 4 to use with OctoPrint. I created a basic mesh case, one with a ribbon cable slot, a case for a 30mm fan, and a 30mm fan with ribbon cable slot. With…
I remixed this from Malolo and Haz1's ideas for a frame mount for the RasPi right above the Einsy board. There was a Raspi 4 model, but not a 3B, so I snipped and clipped them together :) You can mount it using an M3x10 screw from the…
UPDATE Added a slot in the top half for Raspberry Pi Camera module https://youtu.be/lVM0vg\_LYkY Learning Guide: https://learn.adafruit.com/3-dot-5-pitft-octoprint-rig/overview OctoPrint & Raspberry Pi This project adds a touch screen…
Please post a make if you make this! :) Demo of print status screens: https://imgur.com/a/yX2dhjJ Compact Case for Wemos D1 mini wifi ESP8266 with 0.96 Inch Yellow and Blue I2C IIC Serial 128X64 OLED Display . Uses (1) 10mm M3 screw for…
Note: This case is designed for the Raspi 3b+ if you need a case for the 4b it is linked here . This case is designed arround the Raspberry Pi 3b+ and provides for mounting a 30x30x7 mm 5V fan. Features * Case cover with OctoPrint Logo…
My target was to create a box covering all wires arround a 7 inch touch screen, a raspberry PI4, and 3 switchs. Only one cable is reaching the box with an USB connection to the printer, a power input for the PI, and some switchs lines. A…
…Please be sure to hit like & post a make, I'd love to see your prints! UPDATE: Model for BTT TFT50 PI SCREEN V2.1 ADDED!! LATEST VERSION!! IMPORTANT NOTE!!! The newer V2.1 screens have 3 buttons instead of a switch & brightness wheel.…
intégration octoprint pour raspberry dans le tiroir de la ender 3S1
update 02.06.2020 I corrected files in the download section. Now they are correctly a cover and a bottom, and not just two covers. Thanks to David Ewen for letting me know ! __________________________________________ This is an…
OctoPrint/OctoPi Camera configuration for Prusa 3D printer MK3S(+) This configuration is used for monitoring and controlling a Prusa MK3S(+) remotely using the OctoPrint software suite ( https://octoprint.org/ ) an RPI4B (…
This is a station box designed for the Wemos D1 Mini and the standard 0.96" 128x64 OLED display. Get creative with Arduino code or load some of the awesome Wemos applications out there. The Wemos D1 mini will slide in and is held in place…
Prusa Automatic Nozzle Cleaner This solution is for the Prusa MK-series printers, that don't really have an out-of-print area, most solutions will either collide during bed-leveling or can't coop with the PINDA-sensor. If your printer…
*This version is designed for a Raspi 4b with fan. If you need the 3b+ version it is linked here .* Update: Per a user request I've added a case version that uses 3mm case screws. Warning: I have two Pi4B's and neither of them have…
Notice: it's not only for the ender 3 v2 Model descriptions: arm rail mount for a aluminum extrusion (tested on ender 3 v2 extrusion) this one the just tall enough to peak over the ender 3 v2 bed height, this is around 10 cm and 12 cm…
Update: Febuary 10th 2022, added a setting to print the original case and stl without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…
This is a Remix of Raspberry Pi 4 - OctoPrint Prusa Mount (MK3/MK3S) with more clearence for the USB-cable. The housing used is Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case , because it is configurable and fits perfectly…
This box supports following components: Raspberry Pi 4B Waveshare 4.3" DSI display ( https://www.waveshare.com/wiki/4.3inch_DSI_LCD ) Noctua 40mm 5V fan - NF-A4x10 5V PWM 1-channel relay (unfortunately not exactly a typical one:…
RaspberryPI 3 Case, Small case for Prusa i3 Frame. It did attach to the frame with one screw only, the cover has two hooks to help keep the case centered. I did attach two top's, one clear and one with electronic skin that will help…
The stick on LED strips many folks use have two problems this tries to address: They have glare due to the LEDs facing the user - so this mount angles them in slightly to face the printer. The adhesive gets weak with heat and falls down -…
Easytoprint 0,4 Nozzle and 0,12 layer for more details HAVE FUN use mediterran REVEL color set to get a Knight look
A neat and easy to install octoprint enclosure to fit an Ender 5 / Pro Unlike other similar designs the base of this enclosure is separate from the upper half so installation is much simpler This design is to suit a Raspberry Pi 3B+ You…
This is a station box designed for the Wemos D1 Mini and the standard 1.3" 128x64 OLED I2C display. Get creative with Arduino code or load some of the awesome Wemos applications out there. You can find the original little brother to this…
For fix the cap I use tiny neodymium magnets of 5x1 mm The case has space for 2 or 3 step down DC converter for LED lightbars or fans, Print Settings Printer: Ender 3 v2 Rafts: No Supports: Yes Resolution: 0.16 Infill: 60% Filament: eSUN…
Phone Mount for the Ender 3. Screws in behind the two front screws and angles the phone to show the print surface.
Summary Here is my custom PSU mount for my Ender 3 Pro. It has a few features and advantages compared to the stock PSU mount : Low profile mount : nicer look and lower the center of gravity so more stability Relay : mount for a relay,…
Fastprint at 0,3 good to print detailed at 0,15 HAVE FUN use cura 75max to get supportfree printing as shown in the image
3D Printer Monitor designed for the Qrome Monitor Kit. Kit is available here: https://www.etsy.com/listing/823257424 Configuration Video: https://youtu.be/kcBspqWhpIU I have been asked by many to help with their build and or…
Dopo aver analizzato le varie soluzioni trovate, ho deciso di progettare un box, per la scheda Einsy e il Raspberry Pi4, di mia iniziativa. Questo non è un remix ma un mio progetto. Ho cercato di includere ciò che serve alla stampante,…
Raspberry Pi 3B behind Monitor Mount With 40mm Fan Mount I changed the Fans of my Ender 3 Pro. Hotend 2x 12v (one for Mainboard 1 for Hotend serial) Coolingfan 2x (one for Raspberry one for Print cooling) Make sure your printer is correct…
I've been slowly reworking my BLV MGN Cube 3D printer. Since I ended up repurposing the original PanelDue touch screen display, I wanted to come up with a different solution for the front display. I decided to go for a cheap 7" Android…
This is the Pi Camera Hat - A simple hat to add a Raspberry Pi Camera to your projects. The face has plenty of room for additional LEDs or accessories, and the base of the hat includes a sturdy mounting block with standard 1/4"-20…
This is my simple mount for a Raspberry PI Zero W 2 and the rev 1.3 camera or one of the bigger on a 39x39mm pcb. It uses M3x15mm to join the links together M2.5 x5mm to secure the pi and m2x5mm for the camera module. To mount to my Vyper…
THIS IS A COPY - I copied this from thingiverse, because I very much like the design and have printed it myself. It was originally created by monkeypantman. Again: This is not a Remix, it is a copy. RELEASE VERSION So here it is, V3.1 of…
I was experiencing issues running Octoprint on my raspberry pi Zero 2W. The entire install would break randomly, requiring me to reflash a brand new image of octoprint every so often. I eventually traced the issue to overheating caused in…
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
Ich habe einem Kumpel einen Displayhalter für den X1 gecaddet und dachte es wäre zu schade wenn nur ein Mensch auf der Welt dieses Model hat. Sicherlich kann sich noch jemand daran erfreuen. Leider lag die Datei jetzt über ein Jahr in…
I created this $10 IP Camera which allows you to use it for Octoprint (Or just a security camera) instead of a wired USB camera. USB has a limit of the number of web cams it can support with the bandwidth of the USB Bus. This IP Camera…
Who WOULDN'T want their own life sized BMO who could say nice things and help control their 3D printer?? I love using Octoprint to control my 3D printers, an open source plugin and web interface that gives incredible remote access to any…
8/17 Update: Received my Raspi 4B and mounted it in the RASPI_4B OctoPrint Case. With the design changes, the case fits the Rasberry PI 4B well. Removed the WIP status. 8/14 Update: Fixed assembly screw hole supports. 8/13 Update: Due to…
This is a multi color remix of the MK3 RPi + piTFT cover by acorderob . Changes Added trim details for multi color Made the X button larger Added a RESET word For the touchscreen Raspberry Pi 3 B+ with CanaKit 2.5A Power Supply I plan to…
This is a Mac Classic version of Qrome's OctoPrint Monitor so I'm going to quote his summary This is a station box designed for the Wemos D1 Mini and the standard 0.96" 128x64 OLED display. Get creative with Arduino code or load some of…
This box contains a Raspberry Pi running the fabulous OctoPrint / OctoPi, a 5 V power supply and an SSR. It allows you to remotely turn on and off your attached 3D printer, either by using the web interface, by sending G-Code or with a…
Filament holder with scale compatible with the Filler system. https://www.printables.com/de/model/174620-filler-filament-holder Built in is a load cell for 3kg with HX711 module. !!! The diameter of the filament roll must be larger than…
3d Printer Enclosure Raspberry Pi 3 Line Display, Safe Shutdown, Temperature Fan Light Controller. Designed to bolt to the outside of an enclosure - plexiglass, wood etc. Use Octoprint to control printing, lighting and fan. Temperature…
I was got tired of guessing in error a few times which cost me a bunch more time. Printed with a filament change at 1mm Reading degrees; 3 lines closest to hole are 45 deg sequencing 0, 45 & 90 8 Hollow lines are in 10 deg increments,…
Update: Febuary 10th 2022, added a setting and stl to print the original case without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…
My first attempt at creating a Cura theme as I wasn't digging the any of the stock themes for Cura 5. Inspired by HughMann's Cura 4 Vaporwave theme. Instructions for install: Download the 3x .svg and 1x .json files. Create a folder called…
Remixed for fitting 7.2mm push buttons.
Now on Printables! Check the Thingiverse page here to see previous makes and remixes. SEE ALSO: Universal Buttonbox (for example for enclosures or other printers) Ender-3 ButtonBox (for OctoPrint) This is for the people who prefer to use…
In attesa che arrivi il kit da Prusa, ho progettato questa scatoletta per upgradare la mia futura MK3S+. Ho pensato questa scatola esterna per metterci il Raspberry 3B+, un convertitore step down, una ventolina da 40 millimetri e un…
PROBLEM We designed this a modular mounting system for octoprint touch screens. We ran into a problem where we wanted the size of a 7in touch screen to control our printers but didn't want to take of the space on our work space to have…
Simplistic case designed for Qrome's Octoprint Monitor hardware ( https://www.thingiverse.com/thing:2884823 ) and based on marcoamr2002's 'OctoPrint Monitor' ( https://www.thingiverse.com/thing:3262112 ). Choose between the flat or angled…
Summary A case for the Raspberry Pi 4(B). The lid is designed to attach a 40mm 5V fan for proper cooling of the Pi - e.g. the Noctua NF-A4x20 5V 40x40x20mm or similar. The case has cutouts for all connection points of the Pi and can (…
Now on Printables! Check the Thingiverse page here to see previous makes and remixes. See also: ENDER-3 VERSION ON THINGIVERSE OR PRINTABLES (Original design, made specifically to bolt to the Ender-3 LCD) Universal Buttonbox (for…
I wanted to have a way of quickly seeing the progress of my current print, without visiting my printer, an app or the webpage of octoprint. Also I needed a use for the LED-Ring I bought a few months ago. What you will need: NeoPixel…
Let me start to thank user 0110-M-P from Thingiverse for sharing his work in Thingiverse: https://www.thingiverse.com/thing:922740 I remixed his great job to obtain following results: active cooling with Noctua 40x10 5V fan less possible…
This year's cookie cutter is a tribute to Gina Häußge and octoprint. Thank you Gina.
This Raspberry Pi 3 Case was specially designed to work with octoprint in a printer box. The case hides nearly all cables in the case to create a clean look in the printer box. Screwholes for wall mount are also integrated to make it…
Design to uso double side tape to glue into your printer frame , the camera have 180 degress of rotation to allow you to set the better view for your set up. Dont need any support ,desing with cable managment in mind featuring two cable…
Enclosure for Raspberry Pi 4B that fits under an Ender 3 bed carriage. It has cutouts for all the Raspberry Pi4 ports , a 12x12mm push button to wake up the Pi and a rocker switch for the LEDs. On the back, it has holes for a DC port and…
Simple Automatic Nozzle Cleaner If you have some out-of-print area on your print-bed then a very simple automatic Nozzle Cleaner solution is presented here for you. An out-of-print area, is an area, which normally will not be visited by…
mount your raspi to your mini. used this design https://www.thingiverse.com/thing:922740 by 0110-M-P on thingiverse.
Octoprint Raspberry Pi Logo Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Polymaker Polyflex PLA Blue Category: 3D Printer Accessories
IDK maybe someone want this Key caps for a keyboard using octoprint USB keyboard plugin, printed with a 0.3mm nozzle, 0.4 will do but will leave some gaps on the letters. Its stuck on with double sided foam tape to save filament and to…
Snaps on to Malolo's screw-less/snap fit case, screws to MK3 frame, but raises it up about an inch so that there is a bit more room for plugging in USB and ethernet cables. Other remixes I found (and printed) were a bit flimsy. I also…
A very rough and ready raspberry pi enclosure for the ender 3 which sits underneath the display. It was one of the first models I ever uploaded to printables and also one of the first I designed exclusively in FreeCAD. Mounts to the…
Colores: Blanco // Rojo // Negro (en ese orden) El cambio de color se realiza depende de la escala que le den al modelo
Description A case for the standard Raspberry Pi Camera often used with Octoprint. It can be attached - using balljoints - to the printers' 20x20mm aluminium extrusions that most Ender 3 clones have. If you like check out my Raspberry…
Printed with Prusament PETG Orange 0.3mm for the bottom, 0.2mm for the top no rafts or supports required. Alieexpress ring:…
This custom PSU case for the Ender 3 replaces the stock case and adds a place to mount a 3v relay, and a separate attached enclosure to mount a Rasperry Pi 3. The enclosure has a lid that slides on an off easily to access the PI. In…
I use a raspberry Pi 4 with a hyperpixel display and camera to remotely monitor my prints. For this i used the design parts of the "articulated" camera arm and remixed the housing for the pi4 with hyperpixel display. You can find the .stl…
have fun use skin or sand filament
Added the octoprint logo to a raspberry pi 3 case. I used a 0.4mm nozzle that came stock with my printer. I'm surprised the eyes came out as nice as they did. TinkerCAD Link: https://www.tinkercad.com/things/fiv5YASfrra Edit: Modified the…
Notes Don't have any green PLA (yet), so the cover image is more of an “imagining” of what it could look like. My z offset was a little too low, so the final product should look a little better than the images. Printing Printing the model…
Two different PTFE-mounts with 3mm-holes. I didn't like the print-orientation the original model forces you to use, so I remixed it.
Update as of Feb 22 2020: I have added the cover (lid.stl) to the files. I had simply forgotten to include it. Sorry!! I found the great remix from @wabbitguy to use NodeMCU Amica for the Octoprint monitor. I had all kind of displays…
This is a simple 3D printed ball mount to permanently mount a Raspberry Pi camera to a flat surface, e.g. the inside of a 3D printer enclosure. It can be mounted using double sided tape or screws. Additional hardware needed: M3x16 bolt or…
GIRO.remix - OctoPrint Raspberry Pi Camera Mount General This is a remix of parkis' nicely designed Raspberry Pi Camera Mount for the Prusa i3. I nearly completely redesigned it to make it fit on my 3D printer with a different camera. The…
Have funprints supportless in 0,2 and fast at 0,3 Please see the other stuff i made https://www.printables.com/@Magig_I3Prusa/models
student artwork optimized for FDM prints in 1inch 25mm supportless Have Fun use water coloration and goldshine drybrush
The first in a series of models for makers to earn achievements for their dedication to 3D printing. Model prints with no supports and with 10% infill. Optional panels are included if you want to print brown/wood covers for the model…
These are various embossed OctoPrint logos which can be added to your own designs. Category: Signs & Logos
Octoprint case for raspberry pi 4.
Basic design with angled legs for stability. Printed in Prusament silver. Ps. If you MAKE it and LIKE it, please POST a make. 👍😊
This case is designed to fit between the v-slot profiles of the base frame of the Anycubic Mega Zero 2.0 mounted using T nuts. It has room for a Raspberri Pi 4 and a AZDelivery HW-140 DC-DC Buck Boost Power Converter to convert the 24V of…
A simple mount that can be slotted into the end of the x axis extrusion. It's designed for a webcam made by Trust. I'm sure it's easy to design an adapter for different cams or to just modify the Fusion 360 File. The goal is to have the…
OctoPrint Raspberry Pi 3B Case One lid has Raspberry Pi symbol and a OctoPrint symbol One lid just has the Raspberry Pi symbol I had to drill the Raspberry Pi 3B mounting holes out to 3.5mm for 3mm bolts to fasten it together Raspberry Pi…
Enclosure Control via Raspberry Pi 4 and Octoprint, Power on/off Printer, Lights, Heater Displays Temperature and Humidity within enclosure. Items you will need SainSmart 4-Channel Relay Module Raspberry Pi 4 with Octopi Installed…
Case for Raspberry Pi which is designed exactly for the back of the Ender 3 Pro. I use a Raspberry Pi 3 Model B with the latest version of octoprint. With the plugin "enclosure" the two relays can be controlled. Parts: Raspberry Pi 3…
Prusa display panel with a extra setup to octoprint with a 4.3 inch DSI screen Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Prusa PETG orange Notes: The 2 parts need to…
Learn Guide: https://learn.adafruit.com/circuitpython-octoprint-controller-and-monitor
This is a remix of the Raspberry Pi Case by kingstonrichard ( https://www.thingiverse.com/thing:4713922 ) I likes a lot the idea of having a separate bracket to hold the case. But recently I started needing access to the GPIO pins on my…
