Liczymy pasujące modele…
This is an updated version of my TS1 case. The biggest change is the ends come down from the front the same way as the TB1 and the upcoming RAK case for consistent styling and function. This one doesn't require you to remove the SMA nut…
Here is an enclosure I designed for the MKS DLC32 V2.1 and the accompanying TS24-R v2.0 touchscreen. It has vents and opening for a 30mm fan for cooling the drivers. At the rear, power, USB, and TF card are accessible, as well as an…
This box allows the ATS25 max-Decoder receiver to be fitted in a more comfortable position for the user. The front stand can be folded, and as there is a slot for the stylus, it locks the stand in the folded position. To attach the…
For use with CTS 288 Rotary knobs with and without button press. The Rotary knobs with button press are MUCH more durable than those without. The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm…
Case to keep the PTS200 USB-C soldering iron and a few of the most important accessories in a neat tiny package.
Deutsch im Anschluss. This is my remix with many changes for two button boxes to play Simulater games (blank faceplate included for your own design). A sun visor is optionally included (please use optional gasket with mount). The original…
Knobs for parking brake and trailer brake. Made for simulator button boxes.
Printed in PETG with 40% infill and supports. In meinem Profil ist ein passender Messuhrhalter zu finden. In my profile you can find a suitable dial gauge holder.
PTS200 case insert for the mid-sized Rugged Multipart Case V2
Kompatibelk mit Vielen Geräten die Teile habe ich mit einem 4mm Messingstab verbunden (eingepresst, Alternativ kann auch eine dünne schraube etc. verwendet werden, Die verbindungs Löcher müssen eventuell nochmal nachgebohrt werden. Zur…
Gedruckt in PETG. 4 außenwände 30% infill 0,2mm Layerhöhe. Ich habe das Glück dass ich einen Drucker mit einer 350x350 Druckplatte habe und konnte das Teil am Stück drucken. Ich habe aber eine version erstellt die in 2 Teilen gedruckt und…
Made this mount for a custom CNC with 40x20 aluminum profile with DLC32 MKS board. With 8 M3x8 insters on the base parts.
Additional hardware needed for assembly: 2x M3 nuts, pressed into the lid, to minimize wear from the plungers. 2x 5x6mm (Case Diameter x Height) spring loaded ball plunger (Bambulab FB004), pressed into the base for lid retention. Print…
Führungsschiene 30cm lang für Metabo TS254M mit Einlegeplatte
Die Halterung klemmt die Wurkkos TS21 Taschenlampe (Außendurchmesser 26mm) fest an einer ihrer Rillen. Für die Klemmung kann eine erhitzte M5 Sechskantmutter unten in die seitliche Klemmung gedrückt werden, sodass sich die Halterung mit…
This is a Truck and Trailer park simulation button I created for my sim racing button for ETS2 and ATS. This knob fits potentiometer with 6mm shafts. Printed in Bambu Lab PETG-HF filament with the settings below. Nozzle = 0.4mm Layer…
My collection of custom shift pattern plates for the Thrustmaster TH8A Shifter for use with ETS2 and ATS. The following gearboxes are covered: Scania 12 and 12+2 Volvo 12 and 12+2 ZF-12 and ZF-16 Eaton Fuller 10, 13, and 16 There is also…
This 3D printed accessory is designed to facilitate users who have purchased the MINIWARE TS21 precision soldering iron
Milwaukee Table Saw miter slot gauge adaptor, for mounting of digital/dial gauge - To be used for blade/fence alignment.
This is designed to fit my Kobra 2 Pro diagonal, which brings it to 290mm. 12x7mm to fit the Miterslot with space underneath for good sliding capabilities. 3,6mm Countersunk Holes for small 3,5mm Screws. Printed in White Meta PLA from…
There is 2 design one for the CTS 288 encoder with a 0.250-inch shaft and one for PEC11H encoder with a 6mm shaft . I've created two models: A 2-part version for single-color printers , which includes the knob and a cap to be glued into…
This is an adapter for my SKRS truck shifter to nicely fit on the Fanatec Clubsport 1.5. I know there are a bunch of SKRS shifters available, but be my guest to alter it to your specific needs UPDATE!! After playing some ATS and ETS2, I…
Upgrade your smart home experience with our custom-designed adapter for the Meross MTS200, specifically engineered for 503 electrical boxes. This adapter provides a seamless solution for integrating your Meross devices into existing…
A T-slot insert making compatible models like https://www.printables.com/model/108962-featherboard-for-table-saw with METABO TS 254M Designed to be used with M6 screw
verbindet dein Absaugsystem mit der Metabo TS254M Tischkreissäge verschiedene größen verfügbar. Festool kompatibel osVAC Neo kompatibel 32mm, 35mm, 38mm Schlauch kompatibel auf Anfrage erstelle ich auch gerne noch weitere Adpater für…
Piezas para aprovechar los huecos de las bebidas de un Toyota Corolla TS del 2024, consta de dos huecos (vasos) para almacenamiento, caja central para ambientador o almacenaje que funciona a presión y se queda fijo en la tapa, la tapa…
I builded a customized button box for Euro Truck Simulator 2 (ETS2) with an Acraze platine. This is a ready box for my wheel stand. I bought the following buttons: For the parking break:…
Part of my solar shed scale model, this is a mockup of the Watts 24/7 PV Combiner Box used to combine 6 parallel PV inputs to 1 output. https://watts247.com/product/solar-panel-combiner-box-6-circuits-to-1/ The downside of the inverter…
This attachment is for securing the Broadlink HTS2 temperature and humidity sensor to the Broadlink RM4 Mini. It allows the sensor to be “floating” in the air above/ around the RM4 Mini instead of resting on surfaces, allowing it to…
joystick farming simulator or ets2 or ats switch : https://fr.aliexpress.com/item/33021136738.html?spm=a2g0o.cart.0.0.ba16378dNklvGt&mp=1&gatewayAdapt=glo2fra controller :…
Scania 12+2 , Volvo 12+2 , Eaton 18 , ZF 16 pro řadící páku TH8A
A connector to connect a 38mm hoose to a 50mm hose or dust extractor. Originally esigned for use with Metabo TS 254 M table saw and Ozito shopvac, but it will probably work on many tools and vacs TPU is ideal because it allows you to…
5 degree agled base for Park Tool truing stands TS2, TS2.2, and TS2.3. Includes holders for parktool spoke wrenches, as well as small storage for spoke nipples and other small parts. Needs 2 M8x25mm bolts to attach to the bottom of the…
Print with white PET-G
The miter slot for the Ryobi RTS23 table saw is a weird shape and there's only one of them. In order for any tools using the slot to be useful, there can't be a lot of wiggle room. I've previously made a wooden rail guide for my sled, but…
Diffuser that also enables flashlight to stand on its head.
This is a remix of https://www.printables.com/model/684996-laser-engraver-riser The only difference is the height as these models are reduced by 25mm.
Model made from measurements of the Miniware TS21. Intended for making your own case, retainer, etc.
This is a rugged case for the PTS200 soldering iron. It is designed so it fits a build plate that has at least 210mm in one direction (e.g. Ender 3 and their variants) no resizing is necessary. Also it provides inserts that can include…
The HSTS21 is a split core current sensor based on the Hall Effect principle. AC or DC current passing through a clamped wire induces a magnetic field that is sensed and outputed as a voltage in the range for this device of +/-4V DC. Here…
Those are two magnetic dustcovers for the Holzmann TKS250 tablesaw. The dust emission from the front ist one of the main flaws of this saw. There are some solutions out there. But most of them are very complex. Mounted via magnets 8x3mm.…
Hi everyone! I couldn't find a suitable charging dock for my Amazfit GTS 2e, so I created my own. Please excuse any design flaws; this is the first time I'm sharing one of my designs publicly. I created it because there were no existing…
I have prepared the first two models of my upgrades for the Two Trees TS2 laser engraver. I will gradually add more upgrades. - Zero_Corner for fast material setting to zero machine position (PLA, 20% infil) -Spacer to support material in…
This model is a direct replacement for a plastic stem driver that tends to break in some Kohler-brand shower handles. Recommend printing in PETG or ASA for strength. Original part tends to break at the edges of recessed square drive, this…
I made this slider for Holzmann table saw but it fits other metric sized T Tracks too. I was surprised to see lack of track sliders for meteric (19/15mm) tracks. This one fits 3 bearing thin rip jig and feather board from Aliexpress/Temu.…
The splitter and range are on one switch. Parts for build: USB Encoder:…
stick some double-sided tape between the joystick rod and the shift knob to prevent it from rotating. https://www.printables.com/de/model/530160-button-box-for-simulater-ets2-pc I would be very happy about a Make, Like or Share! Happy…
I created this model as a reference for myself when designing flashlight helmet mounts. Using it as a component in my assembly file allows me to make custom parts which conform to the shape of the light. I tried to include as many details…
A basic Miniware TS21 soldering iron holder for IKEA Skadis. Bit on the loose side so that if you install the finger grip, it still fits. It uses the T-Clip locating pin variant, so it shouldn't rotate. Should be used with low profile…
Náhradní díl pro úhlový doraz stolní okružní pily METABO TS254M
Magazine bases to suit CZ TS2 .40 / .357SIG 10-round block base magazines
This truing stand needs a base. I've made some feet for it. Don't clamp too tightly otherwise you risk crushing them. Category: Tool Holders & Boxes
Protective case for the receiver "ATS25 max decoder" with a stylus slot.
I bought this PTS200 soldering iron from aliexpress which supports TS100-styled bits and T12 bits via different sleeves. The threaded connector (shared between both TS and T12 configurations), is left-threaded on the sided that fits onto…
For all those out there who are ATS and ETS2 fans, here is my attempt in creating a steering wheel cap for the Union Pacific 18" steering wheel. Printed in Bambu Lab PETG-HF in the parameters below Nozzle = 0.4mm Layer height = 0.16mm…
Dieser für das ATS25 vorgesehene Drehknopf mit Fingermulde erleichtert das rasche Verstellen der Empfangsfrequenz. Er ist auch für andere Potentiometer mit 6mm-Achse einsetzbar. Um ohne Stützen drucken zu können, wird die Fingermulde mit…
Knob 20-25% Infill 3 walls Mount 100% infill KCD1 - 2 pcs M3 screw L15 mm - 2 pcs M6 nut - 1 pcs
Plate Adapter 503 Electrical Box for Thermostat Meross MTS200
A Miniware TS21 / C210 soldering iron tip holder for IKEA Skadis. It uses the T-Clip locating pin variant, so it shouldn't rotate. Should be used with low profile clips. I printed in 0.20mm PETG, others should work too. Print upright with…
This is a knob for MZ TS250 for the battery side cover. Added a M6 self locking nut hole. I did not tested it yet. When I printed it i'll modify the descripton.
Covers for the exposed extrusions on the Holzmann TS250 circular saw to prevent injury/ripped clothing upon unwanted contact. There are different pieces for the different extrusions, as well as a replacement piece for the guide (which in…
Halterung für ein Federbrett oder eine verstellbare Doppelrad-Gleitführungsrolle für Metabo TS250 Tischsäge. Bevorzugt : 2x Flache M8x30 Sechskantschraube, Kopf maximal 4,5mm höhe wegen der Nut + 2x M8 Muttern und 2x M6x40…
Uhrenständer zum Aufladen der Smartwatch TS29 Druckeinstellungen Druck er: Geeetech A10T Flöße : Ja Unterstützt : Ja Ausfachung : 80 Filament: MOD3D PETG Kategorie: Zubehör
Siehe beim Original. Schrauben für Stützenlagerung: M3x20mm
A simple clip for a Wurkkos TS21 Flashlight made in OpenSCAD. Nothing fancy, I use that clip in my camper for months now without any problems.
The bearings at the rear of the Twotrees TS2 are only friction fitted. Over time they work their way out causing the bar to move around. Spacers designed to butt up against the inner bearing ring and the red belt guide. I printed 9 at the…
This model is a compact and practical storage box designed specifically for the TS21 soldering iron . The box provides dedicated compartments for: the TS21 soldering iron soldering tips a power supply additional free space for accessories…
This is just the snap on over cap for the channel knob for the Motorola XTS2500 HT radio. This was designed and printed with PETG for heat resistance and durability.
The original model Alley Chat made for the TS2 had threaded holes that were too big. This is a single 1/4" thread mount. I also added a gap in the middle of the top clip so that it could be centered on the mount.
A stand for my NAS. It consists of a base and legs that simply slide into the holes; I’ll also attach some soft felt to the bottom of the legs so that vibrations aren’t transferred to the shelf where the NAS is stored. The dimensions of…
Instead of buying expensive bicycle lights, I took one of my Wurkkos flashlights and made it a bicycle front light. Easy to plug/unplug, and easy to handle (yo can put it in your pocket). The littel “T” shapped figure, is to “lock” the…
A wall mount for the Harman Kardon CEN TS20/30 center speaker, the center channel from the HKTS 20 and HKTS 30 5.1 systems. I couldn't find a bracket for it, so I made one. I modeled it last weekend, and it's currently mounted to my wall…
This is a diffuser for the Wurkos TS28 flashlight ( https://s.click.aliexpress.com/e/_c3YUVI0Z or https://amzn.to/4fNdj4r affiliate links) It isn't completely enclosed to allow for airflow. I don't recommend PLA for this due to the low…
Model made from measurements of the Miniware TS21. Intended for making your own case, retainer, etc.
This model is a compact and practical storage box designed specifically for the TS21 soldering iron . The box provides dedicated compartments for: the TS21 soldering iron soldering tips a power supply additional free space for accessories…
This is a cap that slides over the Wurkkos TS28 flashlight to protect the lens and the button from damage when you store it in a bag with other items. The button cover also helps prevent the flashlight from turning on accidentally, so you…
Kompatibelk mit Vielen Geräten die Teile habe ich mit einem 4mm Messingstab verbunden (eingepresst, Alternativ kann auch eine dünne schraube etc. verwendet werden, Die verbindungs Löcher müssen eventuell nochmal nachgebohrt werden. Zur…
This is a Gridfinity holder (2x5x6U) for a PTS200 soldering iron, with up to two extra tips (TS100/TS101) and the M2-M8 heat insert tops (One hole is slightly bigger for the M8 top). Soldering Iron:…
watch strap keeper holder External dimension 23 x 6,3 Internal dimension 20 x 3,3 Print TPU
A stand that makes the Wurkkos TS27 more stable while tailstanding. It slips on easily and holds the base of the light securely. It has no problem staying put when picking the light up and moving around. It is designed to be printed in…
I wanted to put my curtain lights2 in the open and had to put up with the wind tangling the Led strands. The spacers that come with the product are not designed to keep the strands square, plus they're not enough if you want to have a…
I couldn't find a cover model for the Renishaw TS27R probe anywhere, so I designed one. I think it will be useful for many people who use this probe. The print orientation is shown in the photo. It doesn't require supports, just a small…
This is a cap that slides over the Wurkkos TS28 flashlight to protect the lens and the button from damage when you store it in a bag with other items. The button cover also helps prevent the flashlight from turning on accidentally, so you…
ATS20 to ATS-Mini Upgrade This guide details the physical preparation and hardware modification required to transform your ATS-20+ Radio into a high-performance ESP32-S3 based receiver. By replacing the original Arduino Nano with the…
Designed a sun shade for the Edge CTS2 monitors. Slides over the top of the model. Print with supports and be careful pulling supports. Slides over monitor from top. Suggested Settings: Wall loops 3 and infill 15% Top Z Distance 0.28…
Customized version of https://www.thingiverse.com/thing:94018 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=94018 Instructions Using the following options: text = Acts2:38 height = 1 offset = 0 vOff = 0…
Customized version of https://www.thingiverse.com/thing:148722 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=148722 Instructions Using the following options: object = 1 word = Acts2:38 helper_tabs = 1…
Customized version of https://www.thingiverse.com/thing:2482372 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2482372 Instructions Using the following options: name = Acts2:38 font = 3 textSize = 30…
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Acts2:38 line2 = line3 = line4 =…
Customized version of https://www.thingiverse.com/thing:52734 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=52734 Instructions Using the following options: message = Acts2:38 Font = write/Letters.dxf…
2x M3 16mm - 18mm 2x Heat set inserts M3 X OD5.0 X L4.0 - 5.0
This is a Remix of an Amazfit GTS2 Mini stand to fit the Honeycomb Storage Wall
A cap for the TS20D Pen Meter to prevent poking the sharp probe through your service bag. Prints with not supports and can use an infill of 20% to save filament. The cover has four bumps that engage the end of the meter to hold to the…
I printed this in 87a tpu, and pressed it against my palm. A rigid material may or may not work.
This purchase includes a sub license RTS20 RTS20 = Right to Sell 20 With this purchase, in addition to the set license, you have the right to sell 20. The included 3mf file has a pause set for placing the magnets. If you want to create…
