22 223 modeli
It's the Torture Toaster! The guys at Edge of Tech challenged me to make a torture test that would be fun and interesting, and this ridiculous thing is where I ended up :) This will test your print tolerances, overhang handling, and most…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates and more detailed instructions. Go to my site for an overview of my other models . Only a few of them are published on…
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
Desiged this tower in freecad after the model of already existing examples
Also my second version of the miniature vice became very popular right after it's release. If you don't have it yet, here are the files for the vice itself: https://www.prusaprinters.org/prints/53471 Update 23.01.22: New fully printed…
My version of a Mother and Child sculpture from thingivers https://www.thingiverse.com/thing:1541512
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
Cette sculpture 3D de tête de cheval représente l’élégance et la force de cet animal noble. Le modèle est conçu avec des détails réalistes, allant des oreilles expressives à la crinière texturée. Impression : Convient aux imprimantes FDM…
Minimalist sculpture of a cat. Model based on an amazon sculpture. I recommend you to vary the original size if your printer has a greater volume surface! ;) PLEASE NOTE: If you take the .obj file to modify it, It is important to select…
I have made an extruding nozzle sculpture/trophy/award. There are three pieces to this model: The base, which has no special printing recommendations. The extrusion pile, which should be printed with supports on overhangs greater than 70°…
Furniture legs with two heights to choose, 25mm adjustable to ca. 35mm and 55mm to ca. 80mm. (I recommend checking out the redesigned model on my profile with more heights available and improved threads)…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…
Perfect for Mother's Day. Modified original by shrinking bottom plate, printed in two colors. Add filament / color change on Layer 22. Material: PETG Infill: 15% Grid Remix: https://www.thingiverse.com/thing:1541512
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
This lion head model represents strength, royalty, and wilderness. With finely detailed mane and expressive facial features, it makes a powerful decorative piece or educational model. Printing : Works well with both FDM and resin printers…
Ce modèle 3D représente un requin au design réaliste ou stylisé , parfait pour l’impression FDM ou résine. Il peut être utilisé comme décoration, jouet ou pièce d’exposition. Impression : Compatible FDM et résine Supports : Recommandés…
I did a 5 color 10 h 40 min and 415 filament change test with my MMU. Maybe you will get more changes. Author: Creative Tools Website of the original: https://www.3dbenchy.com/ __________ Ich habe einen 5 Farben 10 h 40 min und 415…
This SVG file goes with mcpea's 3D model of the printer made for PrusaSlicer, which although excellent was missing a proper build plate texture. More exactly, this file replaces the black build plate texture with the big white FLSUN logo…
Nozzle contamination can be seen on the back.
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
Thanks to feedback from a user of my very popular miniature vice with table clamp, I realized that access to the the hand knob on the vice was a bit hindered by a part of the table clamp. If you don't have the vice yet, get it here:…
“Never miss a beat (or a bathroom break)!” “Mix & Relief – Spin tracks, not your bladder!” “The Bathroom Line is longer than your setlist!” 🎧 The Problem: Every DJ has been there. You’re in the middle of an electrifying set, the crowd is…
Organisateur de fiole de peinture à maquette, (pour fiole army painter, vallejo,...) -40 emplacements fiole peinture + 9 emplacements pour pinceaux -24 emplacements fiole peinture + 5 emplacements pour pinceaux
A roller beach toy for making textures and paths in the sand for that finishing touch on your sandcastle or just for fun. This model includes 6 different interchangeable rollers including Pebble texture roller Train track path roller Road…
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
Paint holder for mini paints for the Skadis / Skådis system, three versions that fit either vallejo (or others of the same size), citadel or pro acryl. The dropper bottles (vallejo and pro acryl) fit either standing normally, or upside…
Imprints clay with a dainty floral texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Imprints clay with a beautiful Monstera leaf and Hibiscus flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed.…
A flexible sculpture that is seemly useless until you fold it together. The joints are 3D printed and prints in under an hour. Try to get someone to guess what it is before folding it together. Let me know what you think. I need…
This eagle sculpture showcases the fierce and graceful presence of one of nature’s most iconic birds of prey. Whether perched or in flight, this model makes a striking centerpiece. Printing : Suitable for both FDM and resin printing…
A Mechanical iris that opens and closes like a camera aperture . This one requires no additional hardware like screws. I do recommend using some sandpaper on one part.. see the video on assembly. It's a fun thing to have on your desk.…
Legal Note: Ghost of Tsushima is of course copyright of Sucker Punch Productions all rights reserved. I was inspired to create my own version of a Japanese garden lantern after playing the brilliant game Ghost of Tsushima, I came across a…
Rework of an older model I made. Comes separated in several parts that snap fit together (with the exception of the screen and antenna parts, these must be glued to the body), so it can be post-processed and painted easier. Made in Cinema…
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
This wolf head sculpture showcases the majestic and fierce nature of the wolf, symbolizing strength, loyalty, and the wild. Ideal for decorative prints, fantasy dioramas, or fans of wildlife. Printing : Compatible with both FDM and resin…
Woman | Girl | Fitness | Runner | Architectural figurines | People | Model Woman with long hair in sport clothes. She is suitable for 3D models of nature, spring, summer and autumn city. Printable for the most common scales (with girl…
Imprints clay with a lovely heart texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…
Imprints clay with a beautiful leaf texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…
Modular design, you can achieve various sizes and functions by swapping different components - with more additional parts to be introduced later. Suggested print settings (for Prusa machines, others may need some tweaking): Layer height…
I designed this miniature crane truck in Fusion 360. It complements the miniature vehicles by agepbiz , Bryan and James Wood , all of which I also printed, but my nephew was missing a crane truck :-) WARNING: CHOKING HAZARD - Small parts.…
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
This fixture is used for indexing work using a vise and square for 45, 60, and 90 degree angles. Of course this printed version is not going to be as durable or precise as the commercial metal version, but should still be useful for many…
IKEA Malm-inspired chest of drawers for your dollhouse! With removable drawers. 1:12 scale.
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Imprints clay with a beautiful ripple texture of concentric circles. 20cm wide - 2 sizes of pattern Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in…
Imprints clay with a geometrical hexagon (honeycomb) texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a…
A simple, modern picture frame stand, with a low profile so that it is hardly noticeable. Fits most picture frames and works for portrait or landscape orientation. Can also be used to stand up signs and other artwork.
Enables easy movement of heavy furniture and protects hard floor from scratches. Countersunk hole is designed to house the head of a 4mm wood screw. The top of the screw head sits ～2mm below the surface so it can't touch the floor. On…
Just a spaghetti portion measure with the iconic/stereotipical Italian hand gesture. Holes are for 1,2,3 and 4 typical servings (your “typical” serving may vary). Printing Nothing special to printing this. A color change is certainly…
Miniature girl for your diorama, architectural miniature or as a figurine. Woman | Girl | Student | Tourist | Architectural figurines | People | Model Girl with long hair wearing jacket, pants with pockets, hiking boots and backpack. She…
Additional caps for the Redgrass Games 360° V2 ergonomic handle for miniature painting. Easy to print. ---28.Jan.2021--- ADD: bow option support for Rathcore V3 system ---21.Oct.2020--- ADD: tall version bigfoot version stand foot Print…
This deer sculpture reflects the elegance and serenity of a wild stag, with detailed antlers and posture that make it ideal for winter decor, fairy tale scenes, or nature lovers. Printing : Compatible with FDM and resin printers Supports…
First furniture set for The Bakery. Read more about assembly, print orientation, props and coming add-ons here: Bakery - Furniture set Bakery - Printed The Bakery Note : Print 2x counter shelf Files for the bakery can be found here: The…
Any feedback would be greatly appreciated. Nozzle 0.4mm Layer Height 0.12-0.24mm (Recommended) No supports needed Scale it as you like :)
3D print this string art torture test for your 3D printer to make sure it is greatly calibrated!!! This model will make sure your 3D printer can print mid-air bridges, a key for successful string-art prints!!! PRO TIP: DO NOT ENABLE…
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
Very simple picture stand, scaled for a 5x7" picture. The hinge is a piece of filament. Print instructions Print flat, no supported needed.
Imprints clay with a dainty leaf texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the roller…
Wall art decoration in form of a panda. Looks great printed in Prusament Galaxy Black. Copy of https://www.thingiverse.com/thing:3107770 All credit goes to UnpredictableLab (Toni Liebana) Original description on thingiverse: Decor your…
Barbie-like dollhouse furniture: All printed with 0.4 mm nozzle: Wardrobe - fully printable without support. Use 1.75 mm filament as a connector for doors. Table - I suggest to print “loose” version to put legs into countertop easier.…
Hello guys, small soldier sculpture. Enjoy the print!
This golden eagle sculpture captures the power and grace of one of the world’s most iconic birds of prey. With finely detailed wings and fierce expression, it's perfect for display in natural dioramas, fantasy scenes, or educational…
NOTE : Addition on Sept. 5, 2024; two variants added : Measure06C - label holder on outside of cup Measure06D - plain cup, no label holder This measuring cup was made specifically for my chainsaw, which requires a gasoline:oil mixture of…
Furniture Pin The pins in the picture were printed with a 0.6mm nozzel.
Bring nature to your 3D printing collection with this highly detailed, realistic 3D model of a sparrow! Designed with precision and printed using the Elegoo Neptune 4 Pro, this lifelike bird features intricate feather textures and a…
With this design I have combined my tiny benchmark (link below) with a little temperature tower, which is just big enough to give me all the test results that I need to chose the printing temperature for a particular material. Features…
To adjust the temp tower you can use the py-script. https://github.com/HerrSkunkhunt42/temptower-gcode-adjustment Or use the example gcode for PETG or PLA with 0.4 nozzle at 0.2mm layer height. If you use Prusaslicer, you can insert the…
Creating a replacement nut that is not available. Suitable pure round hole 25-27mm. Need to insert M5 nut Printing: Material: PETG Infill: 100% Perimeter: 2 Supports: yes
Old collection of models I made for a stylized smithy workshop: https://sketchfab.com/3d-models/smithy-game-graphics-2015-54ce631950c1403bb33d2d81047a3a78 I've upressed these models and added minor texture detail to the surfaces through…
Plateau tournant D195x27 monté sur roulement 608ZZ (D22 d8 H7) Le roulement est facilement trouvable dans les magasins de skate, roller ou sur le net en utilisant la Ref 608ZZ ( https://tinyurl.com/r6swn5r9 ). PLA Remplissage 10% Couche…
If you are looking for the complete miniature vise, you are welcome to pick it up here: https://www.printables.com/model/53471 When I had originally released the vise, I was not so profound with printed threads. Therefore the feet for the…
Creating a spacer for an M3 screw Spacer for large screw hole Easy and fast printing Printing: Material: PETG Supports: no Orientation: can be printed from both sides
This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
Print with 0.1mm layer height to make it easier. If you have stringing problems it's going to look messy. Good luck
A precision tool used by model builders to cut miniature softwood, polystyrene, and other plastic materials. It allows for consistently accurate and duplicate cuts for lengths up to mm. Great for cutting model ship planking, railroad…
I needed a cute little way to display some earrings, so I came up with this. As the summary says, it's a 3-piece miniature rack with two models of hangers. The two pieces that make up the rack itself are the "rack core" and the "braket".…
I really appreciate the design from deweycat, but it does not fit the SAMLA box I wanted to use. This design also includes a stick to stack the trays without having to put them on top of the miniatures. It is high enough (more than 55mm)…
Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.
If you’re tired of the eternal Benchy and want something different to display on your shelf, here’s a fresh alternative. It’s also a great way to test your printer’s capabilities, including overhangs, bridges, gaps, and stringing. If…
Imprints clay with a geometrical checkerboard texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to…
Use your filament leftovers to print a shelf with small filament spools for decoration or use it as dollhouse furniture for the perfect makers dollhouse! You can also use it for small filament color samples. Features Simple assembly No…
A Mickey Mouse shaped picture frame. The "portal" diameter is 90mm (about 3.5in) and nicely hold a picture with a diameter of 101.6mm (exactly 4in). I cut my images from a 4x5 printed photo to size using the included "disk.stl" file as a…
Description Remix of the hinged picture stand by @MAKR_110201 for 5"x7" pictures. It's print-in-place now and doesn't require a piece of filament for the hinge anymore. Print Instructions Print flat and without supports. Layer height…
Tool to help check chain tension and wear as instructed in the KTM 790/890 Adventure owners manual. The extruded side is 3.5mm thick (middle of the acceptable range 2-5mm) and 25mm wide. The bottom is grooved to check chain wear and…
This 3D model is a luxurious soap bar holder designed to resemble the front of an ancient Greek temple. It blends classical elegance with practical function, making it ideal as a decorative yet usable bath accessory or novelty gift item.…
Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…
