Liczymy pasujące modele…
Most users of the Breville Barista Express espresso machine get frustrated when using the built in grinder, as the coffee grinds tends to spill out of the portafilter. This dosing funnel attaches to the 54mm portafilter to provide…
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
This is a quick remix of the dosing funnel by Josh Hartman that fits 54mm portafilters with 3 tabs. Depending on how tight you want the fit, you may need to scale the print to 99% or 98%
Advanced users of the Breville Barista Express espresso machine likely don't fill up the stock bean hopper, but instead only grind enough (carefully weighed) beans for a single espresso shot. The stock hopper has an issue that beans fall…
he exterior structure represents Mt. Crumpit , the snowy, treacherous mountain where the Grinch lives, looking down upon the town below. This perspective is a beautiful way to capture the main conflict of the story.Contained within the…
Simple tamping station for Breville Barista Touch 54mm portafilter. Might work for other 54mm portafilters, but did not take different heights into account. Includes storage space for funnel and tamper. No supports or special print…
Water chute for Breville Barista Express / Express Impress espresso machines. This sits on top of the machine and allows easy access to fill the rear water tank. Works great if your machine is under a cabinet. VERY very new to 3D modeling…
Neville Longbottom Wand with some support needed on 2 of the parts. I printed it at .20mm with 15 % infill, but it probably doesn't need that much. I took the original model here, decreased the amount of triangles, and split it into…
Single Dosing tool for the Sage / Breville Smart Grinder Pro. Maybe it fits also to other machines from Sage / Breville. It minimizes the dead space of the machine to +/- 0-0.1g. Installing Install part1 like in the picture (it prevents…
This is an HO scale model of the Pennsylvania Railroad viaduct over the Schuylkill River in Phoenixville, Pennsylvania. The model was developed using information from HistoricBridges.org and Google Maps in Fusion 360. For more information…
petg 30%infil, wall 4mm no supports
For the best look print the 3 pieces separately and assemble them (in the picture). Depends on how accurate your printer is. May need some filing and mallet action to encourage the handle to fit. Otherwise, print the 1-piece with support
Get inspired by Crema Coffee Steam Lever but don't want to spend $40 and take apart my new Breville Barista Pro espresso machine. I designed the snap on the lever which no tool is required for installation. Due to its snap-on design, I…
Breville / Sage Barrista Grinder Gear. Supported models: Express (BES875) - tested Touch (BES880) - confirmed by others These are not available as a separate spare part from Breville (Sage), but are the first to fail if the grinder gets…
Jacksonville Jaguars 1st layer White 2nd Gold 3rd Green 4th Black
Niche Zero holder for Sage/Breville or La Marzocco 58mm portafilter. Designed to stylistically match the grinder while still seamlessly integrating the stock dosing cup and holder. It is an elegant way to grind directly into a portafilter…
Remix of newman13f's model with a wider hole which fits stock 54mm portafilter of Sage/ Breville Bambino/ Bambino Plus. newman13f does not seem to have a printables account though.
I was thrilled by Reven's Portafilter holder for Baratza Encore but I found my portafilter was too small, tweaked the design of the holder piece to fit it. Go get the other parts from their project!
A dosing funnel specifically designed for the WDT (Weiss Distribution Technique) that is compatible with 54mm Breville/Sage portafilters. This funnel captures stray coffee grounds that would otherwise be lost during grinding. Key features…
Compatible with any 54mm basket of Sage/Breville Barista Express, Barista Touch and Barista pro enjoy
This was inspired by this design: https://www.thingiverse.com/thing:4671580 I designed it without the tabs on top with an extended tab at the front to catch on the bottom of the portafilter holder on the Breville Smart Grinder Pro. The…
Remixed from another model on Thingiverse, I made a number of small changes to improve on the design. This model still uses the original top part for the drip tray. In the previous design, drips would be trapped in between the tray cover…
Update: If you're having trouble printing both back halves together, I've uploaded them as separate parts so they can print separately. When printing the back half, I suggest separating out the parts into objects and setting the infill on…
Simple base for the portafilter to have a fixed position for tamping your coffee. It fits specially for the Sage / Breville barista express portafilter with a basket size of 56 mm. The top opening has a size of 61.3 mm.
The Breville Barista Express we bought had the grinder break down after a couple of years of use. The original gear is an engineering grade nylon. About every 3-6 months the gear I've 3d printed becomes stripped and I reprint one of these.
Royal Alcazar of Seville Yesería Planter/Container Non-Planter Plaque version available as well in .obj form. I basically took that plaque and deformed it with an array and curve modifier. Im interested if anyone understands why the…
This is an HO Scale (1:87) model that I made to fit in a shadow box for a nostalgic display of a recently closed down local landmark. Mels' Tea Room www.historicplaces.ca Mel’s Tea Room is a distinctive brick and stone landmark on Bridge…
I recommend every hobby barista, especially those who are just starting out, to use a leveling tool. I designed this one for our SAGE Barista Touch. It is based on the original dimensions of the trimming tool from SAGE and fits perfectly…
The perfect tamping station with a non-slip TPU bottom (glue on) for stability. Designed at the ideal height for stock Breville/Sage Barista Express portafilters (53mm). As seen in the pictures, the filter rests on both the 3D-printed…
Very minimal holder/tamping base for 54mm Breville Barista porta filters. Should also work with other similar porta filters of the same size, though I have no t tested. Prints without supports.
I created this 3d Lettering because i could not find any. Use this in combination with other models or modify it according to your needs. Have fun.
Servilletero con forma de gato
The purpose of these modifications was to reduce the angle of the overhangs on the bellows segments and also make the walls very thin to help with tearing due to the material stressing itself. It also has the added benefit of moving more…
Grinder of the coffee machine Breville BES860 does not work due to wear of a gear inside gearbox. So I made a new gear to replace the worn one. If possible, it is good to increase the density. But consider printing time. A pin with a…
Seen them online but cannot pay $40 for a print when I have a printer and can draw :D I did a couple of test prints in PLA before using TPU. Even PLA (pictured) ones seem to fit and work just fine. Enjoy.
Simple stand for portafilter. I use it for all work with portafilter (grinding and tamping) Also useful for small cups during brewing when you turn it upside down. For honeycomb texture use mod file Link for funnel
The text is embedded in the part, split to parts if you want to color them.
I needed a dosing cup for my Breville. This one fits in the grinder and you can push the button to start it WITH the cup. Makes for better use of my grinder for other brews and fluffing the grinds before dumping them in the portafilter.…
This is a simple dosing funnel for 54 mm portafilters (Sage/Breville). Compared to other available models I tried, this one got longer sides to avoid falling off when knocking the portafilter.
Funnel for filling 54mm portafilter with coffee to prevent spillage. Tested with Sage/Breville portafilter. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm or 0.3mm Infill: 20% Filament:…
Dale un toque festivo a tu mesa con estos lindos anillos para servilletas inspirados en la Navidad. El set incluye tres diseños diferentes: 🦌 Cuernos y orejas de reno 🎁 Regalo navideño 🌲 Arbolito de Navidad Cada anillo tiene un diámetro…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the lug-flanged base files with cutouts for three lugs. This is for compatibility with the Breville Barista Max's portafilter. See the…
This is a remix which I modified its size to 2.5x2.5x0.25 inch, so that it wold work with my ship key stand.
A couple years ago for Father's Day my wife gifted me with the Margaritaville Frozen Concoction Maker Tahiti blender, ice shaver. It is reasonably powerful rubber-mated power blender with an overhead ice shaver. There are a couple…
Organizer for 5 tools for Barista Pro. I have model BES878BSS and I don't know if it works for other models, but if you interested, we can try to work it out. You can put it on the warmer surface. I use it for next 5 tools: 53mm Coffee…
Servilletero cuadrado realizado para servilletas de tamaño máximo de 125mm x 125mm
4 different variants of the 54mm Tamper Station for the Sage / Breville Bambino (Plus) available. The WDT-Tool holder fits with the following product, which is available from various manufacturers on Amazon: https://amzn.eu/d/81th8Xx
Napkin ring (Servilletero in spanish) This is a napkin ring with a customized name engraved on it. The 3MF and STL files have my own name engraved (Enric). I know, i know, your name is probably different, so I'm including the Fusion 360…
As there was no 54mm version of v2 Umikot I decided to remix it myself. Tested it on stock Sage Bambino Plus double portafilter and a cheap basket I got with a bottomless portafilter. Used the Umikot58 - Mech V2 , Umikot58 - Spin Ring V2…
This espresso cup riser stand is designed to sit securely in the drip tray of selected Sage / Breville espresso machines, raising smaller cups closer to the portafilter spout for improved shot control, reduced splashing, and a cleaner…
I could not find a dosing funnel for my Breville Bambino Plus 54mm Portafilter (PF) which fits into the PF holder of my Smart Grinder Pro. The ones I have tried are too tall so I had to tilt the PF forward a little just so it goes through…
rises the cup by 35mm diameter of the zylinders at the bottem is 10,75mm distance between the zylinders at the bottom is 32mm You need 2x M4 countersunk bolts (DIN 7991) with a lenght between 12mm and 20mm. If it fits other…
This is a parameterised model to extend the bean loading capacity for a Breville or Sage espresso machine. Included are both the stl and fusion 360 file. I suspect that this fits all Breville machines, but I could only test it on mine. I…
Simple Portafilter Holder for stock and 2nd party Open Portafilter for Sage/Breville Bambino. Printed on a Prusa Mini+, 0.6mm Nozzle with Extrudr XPETG Anthracite
Aufsatztrichter für den Siebträger der Breville Prima Latte II
S'imprime sans support. Fichier F3D (Fusion 360) mis a disposition si vous avez besoin d'ajuster les cotes qui ont été appliquée en fonction de mon imprimante. UPDATE V2 Ajout de l'axe. (une version complète + une version “easy print”)…
Breville Tamping Stand for 54mm portafilter
Let's be honest, if we are in the hobby of espresso and 3d printing, we love tinkering with our equipment. Maybe even more if we have a breville dual boiler planning or have done a “slayer” mod to it. I think that the white skådis holder…
Rather than buying one, print your own funnel to make sure all the grounds get in the portafilter. Use a food safe material and fill the print with perimeters. Should not require supports.
This is the final version of my take on the iconic Glowglobe from Villeneuves Dune. My original work-in-progress version was uploaded on Thingiverse before (https://www.thingiverse.com/thing:5397910). This revised version is optimized in…
Adorna tu comedor con este bonito servilletero navideño
Breville Espresso Grinder Gear Replacement Part
Low profile funnel to direct water from steam wand into the drip tray, designed for Breville/Sage Bambino Plus Espresso Machine (BES500) Remix of original by AlmondTofu:…
This is a faithful reproduction of the Circuit Gilles-Villeneuve. Its dimensions are 20cm long, 6cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…
6/14/23 - Added Portafilter Funnel with 3mm holes for magnets For those still intent on using the built-in grinder of their Oracle / Oracle Touch, I present this bypass system. The portafilter holder was designed to hold a bottomless 58mm…
UPDATE: I have made a much better version of this I recently got a Breville Bambino Plus and a third-party bottomless portafilter. I couldn't find a suitable tamping station for it, though, so I decided to design my own. Here it is, in…
Trychtýř se zámkem na prodloužení páky, aby se mletá káva nesypala mimo.
This is a simple dosing cup for the Sage (or Breville) Dose Control Pro or Smart Control Pro coffee grinder and fits in its 58mm portafilter-holder and the portafilter itself without making a mess. It can be printed in PLA without any…
A simpler option for those interested, this dosing cup lets you use the built-in grinder of the Breville (Sage) Oracle without having the portafilter locked in. This allows you to prepare your puck without using the auto-tamp feature, so…
Breville Tamper 3D-Printed Replacement Part Overview Is your Breville machine missing its tamper, or has the original one seen better days? Look no further! This 3D-printed Breville Tamper is designed to match your Breville espresso…
This is a HOn30 5 ton BFA Brookville gas locomotive. It is designed to use a Toma Model Works power chassis #6151 with a 12mm wheelbase and 6mm wheels. This is the chassis used:…
Here is the 3D scan of Douvilleiceras gr. mammillatum , an ammonite from the Cretaceous (more precisely from the Albian). If you want to know more about this species:…
Este diseño contiene dos herraduras y una base, que es la encargada de unirlas. El diseño está escalado al 544% porque el archivo .obj es demasiado pequeño. En este caso se hizo de ese tamaño porque el cliente lo requería pero se puede…
Dosing funnel for the 54mm portafilter used on Sage/Breville espresso machines. The design utilises Ø6x3mm magnets that are glued into the 6x holes. This keeps the funnel secure to the portafilter whilst using a WDT tool and storage on…
Disclaimer This hopper does not have much finger protection when installed. It is also easy to disengage the grinder lock when installing/uninstalling the hopper. If you choose to use this, please only install/uninstall it with the…
Introducing the ultimate 3D-printable tamping station designed specifically for 54mm portafilters! Elevate your espresso experience with this sleek and functional accessory. Super durable and easy to modify/remix. Print in PLA with .2mm…
Remixed from the original model by Simbungu: https://www.printables.com/model/80817-breville-barista-express-single-dose Refined look Added magnetic cap! Cap can be used to measure the beans! Feeder is separated as inside and outside to…
Haz que tu mesa de Navidad se vea especial, mágica y súper acogedora con estos hermosos anillos porta-servilletas impresos en 3D 🎨🖨. Están diseñados con dos figuras adorables: ⭐ 👑 Santa Claus en su trineo Perfecto para iniciar la fila del…
I store most of my accessories on the cup warmer of my coffee machine. So it was always full of coffee grind. Since it is kind of difficult to clean, because of the ribs, I designed this little tray so you can remove it for cleaning.…
UPDATE v3: In the new version, both sides of the holder are slightly slanted, and the central bars are now removed for better drying. The v2 drip tray is compatible with the v3 holder. --- UPDATE v2: I've added a new version with drip…
An action figure kit provided as-is for Ed Mercer from the television show, The Orville. There will be future revisions of this model, and you'll notice that the scale may not match future models either.
Holder and Funnel Designed to work with: - The Breville Smart Grinder Pro - A 54mm Portafilter/basket Custom designed the holder. Adapted the funnel from: (just extended the height to work better with the holder i designed).…
A no-mess dosing funnel for use with Breville/Sage Smart Grinder and 58mm Portafilter. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Generic Anything Foodsafe Any…
The model consists of car body, small wheels, large wheels, small off-road wheels, large off-road wheels, robust screws as semi-axles, car key serving as a socket wrench and smaller wrench with handle. It is fun for kids to change the…
I recently swapped out my Bonneville's mirrors for some bar end ones. These look great and are much better at getting past my shoulder. The only down side is that when you remove the stock mirrors it leaves a hole. This little jobby fits…
Breville includes a so-called “razor” tool with the Bambino Plus for leveling the amount of coffee in the portafilter. Being cheapskates, they leave it out of the smaller Bambino model even though it's a few cents of metal material. This…
This may be a very niche item, but if it helps someone, that's great. My Breville espresso machine's steam wand is not exactly centered above the drain hole leading to the drip tray. Nitpicky? Maybe. First world problem? Definitely. But…
Fits Breville/Sage portafilters with 54 mm diameter. Remixed the great original tamping station with added slot for metal mesh filter, because I hated to have it laying around and not having its own slot. It should fit any normal metal…
This is a 9 cm ( 3.5 Inches) high articulates action figure of Isaac the Kaylon from The Orville TV series. Yo can print it in a kit card fashion or as separated parts.
A simple dosing cup for 54mm portafilters. It fits the Sage / Breville 54mm portafilters and also sits perfectly on the Sage / Breville Smart Grinder Pro Tray. Printed mine without supports in 0.2mm Sunlu Matte Black
This is a replacement straight track segment that connects with the Wintersville/Dickensville/Western Express train sets made by New Bright in the late 80s and early 90s. It's compatible with the original track system and with itself, so…
Vytvořeno a zkoušeno na kávovaru Sage BES875BKS (pro některý trh pod značkou Breville). Pravděpodobně by mohlo fungovat i pro jiné mlýnky do kterých se dává páka s průměrem 54mm a spínáním zatlačením na páku, ale nemam vyzkoušeno. V…
I designed this to hold on a vertical wall or on the side of the machine. works for 54mm portafilters with 3 prongs. there are holes for 8x3mm round magnets. version in pictures has 5x2mm ones and was not strong enough to hold on the side…
Remixed the original tamping station with added distribution tool stand and original Breville funnel mount
This is a stand I designed for the Breville 58mm Bottomless portafilter so it is easier to tamp it. Category: Kitchen & Dining BE SURE TO PRINT WITH FOOD-SAFE MATERIALS AND A FOOD-SAFE NOZZLE LIKE STAINLESS STEEL
This is a hopper extension that fits Breville Barista espresso machines. I always found it annoying that I could not fit a full bag in my machine and have to constantly fill the hopper. This hopper is designed to extend the built in…
Boo! 2 is a member of the Boo! Ville Collection. At the bottom of this summary, you’ll find a list of all the members of the collection. Boo! 2 prints great in one color. White is always right, but pearlescents or silky whites work even…
Expresso tamping station that fits 54mm portafilter and comes with a tray and storage
