Liczymy pasujące modele…
Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…
Hi everybody, there are loads of cases for Arduino and even Wemos on thingiverse, but i decided to design some new, very specific for me. My main intentions were: small packaged case tiny walls (yes a little fragile, but light weight and…
A case for the Wemos D1 Mini ESP8266 PCB. It has holes on all 3 walls partially for ventilation but mostly for wire pass-throughs to make running wires in different directions easier. There are holes for the reset button on each side…
I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;) Changes: -rounded the houding edges for a smoother look -create a bezel for a 0.96" OLED -make the bezel rotatable for “Tate Mode”…
TL;DR: You'll want the V5 case and the V4 lid. Choose between logo or no logo with the lid. Do not directly power more than 30 LEDs off of the USB power on any Wemos board, otherwise you run the risk of destroying the board or potentially…
I've designed this case to fit a WeMos D1 Mini board in it. I wanted to design a case which is not much greater than the D1 Mini, but with a litte space for wiring and connecting. Also the WLAN antenna should not be covered to much. The…
A 35mm DIN rail compatible housing to hold a WeMosD1 Mini and a common RS485-to-TTL Adapter. Print instructions Parts 1x 2 Pin KF301 Screw Terminal 1x RS485-to-TTL Adapter 1x WeMos D1 Mini (microUSB Version, ESP8266) 1x 1mm Optic Fiber…
A small case for the Wemos D1 mini with wire outlets that includes a space for a power jack. Optimal for wiring LED-Strips.
I have designed a small, handy case for the WEMOS ESP32 D1 Mini version. Board just snaps in place (start with the USB-port when inserting) You need 4 M3x6 screws to fix the lid. There are two versions of the lid: Version 1 for directly…
I use this case as a sensor box for ESP32 Wemos D1 from AZDelivery with an BMP280 sensor. Wemos itself has no screws so its laying just inside. The distance between the holes is 10mm, which seems to be suitable for many types of sensors.…
Simple box for putting a Wemos D1 Mini in it.
Please post a make if you make this! :) Demo of print status screens: https://imgur.com/a/yX2dhjJ Compact Case for Wemos D1 mini wifi ESP8266 with 0.96 Inch Yellow and Blue I2C IIC Serial 128X64 OLED Display . Uses (1) 10mm M3 screw for…
Wemos Lolin32 OLED Cover (Remix)
Small case for a Wemos D1 Mini, I think I have clone boards as they are missing the curved edges. There are two versions, one with a flat base, and one with 2mm feet as I needed a little clearance for the larger USB plug I had. No…
I've designed this tiny case for the easy use of led strips, the three pin connector is for the strip, the microcontroller is powered over the led strip. What you need additionaly: a pair of M2 x 8 or M2 x 10 or M2 x 12 one JST XH-3P-M…
A simple case to house your WEMOS D1 mini project. Features: Snug fit Reset button access LED viewable Will fit over posts Cover has wire access port USB connector fit relief Simple to print Cover only fits one way This works great for…
NOTE: There is a new version of this box with more variants and better fit for the two Wemos versions: https://www.thingiverse.com/thing:3416713 I built this box to contain the grim Wemos D1 mini arduino compatible (almost) board with…
Case for multible ESP3266 dot matrix projekts. There are many projekts online, just search the web for ESP8266 and MAX7219 or dotmatrix. The drawer in the lid fits to the WeMos D1 Mini ESP8266 module. Close the lid with two M2.5 bolts…
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
You absolutely need to use arachne/variable extrusion width to print this. The outer walls vary from 0.38-0.6mm to provide the snapping action for the lid while still using only 1 “perimeter” to allow fast printing. The reset and…
OnStep is a computerized goto system, usually for stepper motor equipped mounts though any step/dir interface motor driver (including servo) should work. It was designed, from the beginning, as a more or less general purpose system and…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
En mi caso lo he utilizado para hacer un reloj con indicación metereológica y noticias de actualidad además de monitor de impresión 3D con octoprint . Todo programado con Arduino. In my case I have used it to make a clock with weather…
This is my case for the Wemos Lolin D1 mini v4 ESP8266. Please note that only the Wemos D1 Mini v4 fits in this case. This is my first CAD construction ever so feel free to make improvement solutions. Special credits go to my neighbour LS…
Print the two parts of the case without support and snap them together.
I designed this enclosure for my project "Temp2IoT". It can be equipped with a WeMos D1 mini and provides cable outputs for a USB cable for power supply and another for a DS18B20 temperature sensor. After assembling the two parts of the…
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
The original model was nearly perfect for my use case, which was to install a Wemos D1 Mini knockoff inside a Mitsubishi mini split in order to add wifi functionality to allow control through Home Assistant (using this guide ). The…
Small snap fit case for the D1 mini footprint of the ESP8266. Reset button still accessible The small gap next to the USB connector can be used for routing cables to connect to external sensors Prints without supports
I needed an option to mount the Wemos d1 mini module of my OctoPrint-Monitor to my enclose and made this simple mount/case. It holds the module tight (but not too tight to aviod damage of the module), so it can't slip out. To insert the…
No supports needed. Printed in PLA with a 0.16 mm layer hight. The connector itself is stuck to the board using some nano tape, but some hot glue would do the job too.
Description: A WeMos D1 Mini Case including space for another board like the ACS712 current sensor. It is designed for the use of two heat inserts. Print Settings: No special print settings requiered.
ESP32 D1 Mini Case Click shuts nicely Easy print. Dimensions are in the pictures Check out my other stuff https://www.thingiverse.com/micahjj/designs Feedback and Makes I really like getting feedback and despite having thousands of…
UPDATE: Added a "Rugged" version with clips (pretty flimsy, take care) for an increased holding strength. A very slim case for the WeMos D1 Mini DISCLAIMER: I've designed this case to fit my WeMos board with very small tolerances. I hope…
I created a water meter sensor based on Lolin D1 mini v4 and induction probe LJ18A3-8Z/BX ( Build a cheap water usage sensor using ESPhome and a proximity sensor ). And I needed a box to house the D1 mini. Since it was already there, I…
This is a remix of the Dinosaur Nightlight on Thingiverse . I remixed the original Dino 1 so I could mount my Wemos/Lolin D1 mini inside it with a DC power supply jack barrel. The Wemos D1 mini can be mounted and screwed using 2 M2x5…
Ce projet DIY est non seulement accessible et économique (coût total d'environ 7€), mais il est également personnalisable pour s'adapter à divers scénarios de domotique. Que ce soit pour allumer les lumières en fonction de la présence ou…
This is a station box designed for the Wemos D1 Mini and the standard 0.96" 128x64 OLED display. Get creative with Arduino code or load some of the awesome Wemos applications out there. The Wemos D1 mini will slide in and is held in place…
Needed a low profile case that fitted a Wemos esp32 di mini board and nothing else, so I made one. Used it for a wifi repeater. Once finished, made some variations of it. It uses only two screws, leftovers from the ones that come with…
Hi guys, this is a simple case for the Wemos D1 Mini (NodeMCU ESP8266) . Route the cables through the case bottom before you solder them to the Wemos D1 Mini. Easily resized and customized in Fusion360 with the provided .f3d file.…
Simple box for LCD2004 which I use for monitoring temperature through ESPEasy.
I'm starting to add some "smart" devices to the families house. This one can house a Wemos D1 mini and a DHT22 sensor. The design is straight forward, no fancy mounts or places for screws, because I'm using parts that I already have. So…
I have been working on this project since November 2017 and have been enjoying it so much that it is time to share it. Features include: Accurate Clock refresh off Internet Time Servers Local Weather and conditions (refreshed every 10 -…
use a M3 short screw to secure the wemos d1 mini in place
This is a module intended for use in other openscad files. This module generates a frame that can hold a Wemos D1 Mini. This frame can be used in enclosures where the PCB can be clipped into place without screws or glue. Print…
LCD control software on Github: https://github.com/janfitz/Arduino-Wemos-WiFi-keypad-shield-Bitcoin-ticker
It's a snap-fit enclosure for Wemos D1 Shield v3.0. This model requires 4x 2.5 self-tapping screws to hold down the pcb to the enclosure. https://github.com/srg74/WLED-wemos-shield You can also buy the board here:…
Republished from my thingiverse: https://www.thingiverse.com/thing:3342804 Links to the parts contain Banggood's affilate metadata. Intro I needed a PM2.5/PM10 sensor during this winter season. I wanted to monitor more than one room and…
This is a case I designed for the Lolin S3 and an Open-Smart 433MHz transmitter board specifically for the OpenShock platform, a platform for shock collar control. It has a flexure button for resetting the board, a hole to press the…
IKEA VINDRIKTNING ESP8266 Wemos D1 Clip to fix an ESP to get the dust values from the device via WLAN. PLA - no supports - 100% infill
Compact Case for use with the D1 Mini and a BME280 Temperature, Humidity, and Pressure Sensor. I designed this and use it for reading temperature and humidity in various locations around the house. I use that information for Home…
Case for Wemos 18650 charge circuit shield (link below). https://www.aliexpress.com/item/4000957793394.html I used Mrlnka's "Wemos 18650 Charge Shield / Holder Dimension Model" to design this case.…
A case for a humidity sensor system consisting of a DHT22 sensor, a Wemos D1 Mini, a 18650 battery holder and a battery charging module. Features: Sensor is thermally isolated from the rest of the electronics lid holds tight by press fit…
Adapted and more holes placed in top plate to make room for a 4-pin header coming from the HX711 of the Smart Bed occupancy sensor by Lukáš Porubcan . Category: DIY
This is a station box designed for the Wemos D1 Mini and the standard 1.3" 128x64 OLED I2C display. Get creative with Arduino code or load some of the awesome Wemos applications out there. You can find the original little brother to this…
Wall-mounted case for WeAct 4.2" Epaper Module. Based off this 4.2" stand by napalmz and adjusted for WeAct module in place of Waveshare one. This model should fit WeMos D1 mini (ish?) ESP8266 board fairly tight. Pictured is a generic…
Enspired by the DHT22 Feather Enclosure created by cnf I decided to create my own. This model will enclose the Wemos D1 mini and a DHT22 sensor.
GBS-8200 RGB to VGA Video Converter Board + SCART Case Remix adding housing for a SCART plug. This is the PCB mounted right angle version which clips nicely into the housing with the pins exposed so these can be attached to the wires as…
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
Housing for pixelit with wemos D1 mini ESP 8266 Infill: 20% Nozzle: 0.4mm Quality: 0.2mm --------------------------------------------------------------------------------------------------------- Print the front part in white and when the…
No need for soldering anymore - just put the pin headers on the Wemos D1 mini and place the Mini Breadboard on top. Use some pressure to sandwitch everything together. Print the Mini Breadboard upside down and you do not need any support.…
IR-Lesekopf mit Wemos-D1 mini für einen Stromzähler mit einem Ringmagneten (27x5x5) Für den Wemos: https://tasmota.github.io/docs/Smart-Meter-Interface/
Remix of the Case from don frechdachs for Wemos D1 Mini (NodeMCU ESP8266) . I've added a cutout for the USB port. Compatible with the Wemos D1 Mini as seen here:…
Designed this case for my NodeMCU 1.0 ESP-12F ESP8266 board. Ordered a bunch of those from AliExpress (e.g. https://www.aliexpress.com/item/1005001621705950.html ) and needed a case to fit them. Case provides access at the front side to…
Box for WeMos 18650 LiIon battery shield. Same as original but with 3mm more vertical space to make more room for battery. OpenSCAD script included for people who need more/less space. Category: Electronics
A simple case for a complete motion sensor setup using a Wemos D1 Mini ESP32, AM312 PIR sensor and a simple light-dependent resistor. Hardware list: Wemos d1 mini esp32 (or equivalent) AM312 PIR Light-dependent resistor Note: Supports…
Very basic and minimalist enclosure to house the WeMos D1 mini and the matching relay shield. Beside the breakthrough for USB, reset and relay contacts a cable outlet is provided, e.g. for a DS18B20 temperature sensor.
This is a simple case that snaps together for a Wemos D1 Mini and an AM312 PIR sensor. The lid has a spot for a 12mm x 3mm magnet which allows you to magnetically attach the sensor to things to help keep it in place and hidden under…
A case for V3 of the WLED Wemos Shield. Takes inspiration from Serg's original cases. PCB Project can be found here: https://github.com/srg74/WLED-wemos-shield Should fit at the very least the basic configuration, plus the addition of the…
Inspiration I took inspiration from the following designs so have linked them as remixes: https://www.printables.com/model/386784-wemos-d1-mini-case https://www.printables.com/model/494538-wemos-d1-mini-led-strip-case Summary After…
This is a remix of https://www.thingiverse.com/thing:3761277 Parts used: https://www.amazon.com/gp/product/B08CDRC5VL https://www.amazon.com/gp/product/B07SYBSHGX
Wemos D1 mini microcontroller housing that was modeled for the long header that comes with Wemos (one side is male and the other is female), but it should work for a regular header as well. The case has a hole for pressing the reset…
A case for the Wemos D1 Mini ESP32 dev board. Note this is not the same as the Wemos D1 mini that is for ESP8266. Its print in place, apart from the cable strain relief (which I recommend printing from TPU) and a push button. It has a…
After making one of Qrome's awesome print monitors I noticed how similar in size the OLED module and a PIR sensor I had to hand were. So instead of reinventing the wheel and creating a new body for the motion sensor I remixed Qrome's…
Small casing for Wemos D1 mini v3 (ESP8266) with an RS485 to TTL Module. Used for Communication between Smartmeter and MQTT Broker via Tasmota. Wemos is mounted with 2 pcs 2x10mm Self Taping screws, RS485 to TTL module and the lid is only…
Holder for soldering pin headers to WeMos D1 Mini. The holder can be used with three different pin headers:
A simple square case with a pressure fit top that still allows access to the rows of headers and their names.
Pi-hole Monitor is a Wemos D1 Mini (ESP8266) with an I2C OLED display that is managed through a web interface and sits on your local network and will display statistics from your Pi-hole server. This is a station box designed for the…
This is a second version of my previous Wemos boxes ( https://www.thingiverse.com/thing:1995963 ). I have made files for "Wemos D1 mini" and "Wemos D1 mini pro". I also made two lids, one closed and one with an opening for the Wemos OLED…
Gridfinity container for storing Wemos D1 mini boards.
Compact case for Wemos D1 mini and BME280 sensor with an entry hole for a cable entry grommet. Many thanks to the creator of the original model: Big Dog Custom Creations . In addition to the .stl files, step files have also been added for…
This is a replacement backplate for a TFA Dostmann “AirCO2ntrol Mini” CO2 sensor that includes a separate compartment to hold a Wemos D1 Mini connected to the sensor's debug port through a passthrough slot. The ESP allows you to put the…
It's a housing for esp32 wemos lite board (with battery connectory) and 18650 battery holder. It has some holes for the microphone so it will be put inside beehive. The code uses https://wikifactory.com/@prusalab/prusahive firmware a bit,…
This is a case that I remixed from D1 Mini Pro v3 IR Case by Ryukenden . I use it with ESPHome to connect to the pulse outputs on my Eastron SDM230 electricity meter. This is running a tweaked version of HA-Glow Project (ESPHome) to have…
A small project box to house a Wemos D1 Mini and Soil Moisture sensor. I've added an extra hole for the cable of a DS18B20 temperature probe too. Power is supplied via some CAT5 cable. The ESP8266 module is the Wemos D1 Mini V3 PCB, not…
This housing is intended for the Wemos D1 mini microcontroller, in my case for short WLED strips (approx. 34 LEDs). https://kno.wled.ge/ The dimensions of the housing are 44 x 35 x 14 mm. The Wemos is simply plugged onto the printed pins,…
This is a two-part case. The lid holds the Wemos Mini D1 in a slot that leaves the pins available. The bottom has holes so that it can be used with an environmental sensor such as the BMP180 temperature/pressure/humidity sensor pack.…
I made a little case for an Wemos D1 mini and a single slot relay. The housing is completely closed except for the openings for USB and the relay. It is best to wire the relay first and then carefully push it into the housing. I used my…
Thanks for the original design! Needed a small box with a switch, so i did this remix! Fits perfectly!
A little helpful file for making cases to hold either; Wemos LOLIN D1 mini V4 TP4056 BMI160 Holds these parts loosely. Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics Option for my first test in…
This is a case for the Wemos D1 Mini ESP8266 LED & Level Shifter Mini Shield , which makes it easy to control addressable RGB LEDs such as WS2811, WS2812 (Adafruit NeoPixels), SK6812, APA102 (Adafruit DotStars), and SK9822. The Wemos D1…
Case for Esp8266 Wemos D1 mini USB C with reset button , very easy to print. Please note that when you buy this item it may arrive with slightly different dimensions because the cutting process is not very precise. I myself have had…
This model is not to be used as standalone, but should be integrated in your own 3D projects. It is a minimal model for holding a wemos D1 mini. It is a tight fit, so might not work for all printers. (I have printed it with PETG on a…
Snap-fit case for a Wemos 18650 battery shield V3 case. There are cutouts for all power outputs so you can route out wires Simple print, use 4 M3 button head screws to secure the board to the holder Changes to V2 added fillets to the…
This is a mount for Wemos D1 mini in V2 and V3 versions. It is a tight fit. While implementing the project, I followed a similar project: https://www.thingiverse.com/thing:3316703 Additionally, the mount can be screwed on two DIN Rail…
Some people got together to hack the communication protocol of a popular micro inverter by hoymiles so that you can see the internal values and send them on via MQTT. You can find the conversation here (in German) and the code here . I…
This is a small case for a wemos d1 mini with a 16x2 I2c lcd. you can use it for displaying weather data from openweather map or for displaying the current time e.tc.
Simple model of a clone Wemos D1 Mini, taken from direct measurement. Used for fitting/checking purposes in a case I'm designing. Category: Electronics
I created a case specific case to combine the Hichi IR V1.1 IR read/write interface and Wemos D1 Mini to report the power meter readings via MQTT to ioBroker. Just follow the instructions within the linked YouTube videos: ttl ir lesekopf…
Caja de click para un Wemos D1 Mini y un OLED de 128x64 con un diseño simple pero efectivo para proteger ambos componentes y facilitar su conexión. Aquí tienes una descripción básica: La caja es lo suficientemente grande para alojar tanto…
