Liczymy pasujące modele…
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
A 3D scanned statue of Mewtwo. Requires supports around the tail, hand and best case also between the legs. Printed with PLA at standard Prusa settings for MK3S at 0.2mm!
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Meowth Pokemon Go
Wydruk około 19,97 €–24,41 € nettoWstępna wycena jednego wariantu
Easy to make a cute Bunny with Bowtie keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Show you love for Chevy Truck with this Button
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple bowtie
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
There are plenty of fenders out there for the Onewheel XR, but not that many for aftermarket rails like the Floatlife Varials. Here is my version of a mini fender for WTF rails. Check out my Onewheel Collection – I have also designed a…
Wydruk około 7,01 €–8,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to make a cute Dog/Puppy with Bowtie keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Mold for reinforced concrete bowtie, recommended to use PETG.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Meowth Mouse Trap Cover. Put it over your mouse trap. Trap Mice.
Wydruk około 25,26 €–30,87 € nettoWstępna wycena jednego wariantu
Simple bowtie. Completed with strip of fabric and sewing rubber band.
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Carter Pewterschmidt Family Guy.
Wydruk około 3,56 €–4,35 € nettoWstępna wycena jednego wariantu
Bowie inspired bowtie. Glue a couple of pin clasps to the back. G-code is pre-sliced with the colour changes. Print instructions Pretty basic print - G-code pre-sliced for colour changes - need 3 colours. Keeping it OG 2 of the 3 need to…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
If you're long enough into specialty coffee or tea and successfully climbed out of the rabbit hole of mixing the perfect brewing water yourself, you will eventually buy a more reliable water filter system than those table jug or pitcher…
Wydruk około 4,87 €–5,95 € nettoWstępna wycena jednego wariantu
Bowtie with classical guitar design. The size can be adjusted based on your preference. Print instructions I used PLA, 0.4 mm nozzle, 0.2 mm layer height. No ironing (I tested it, but the result was worse than without it).…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
light and fast chopstick rest
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I love both features of the Bow Tie by chavant_fou_3d and by NormanRiver , so I combined both to one. I also added a bit bigger space for the Magnets and tried to combine the Designs. If you need to adjust the band you can print the three…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
case and cover for esp wth32-01 with custom pcb and LM2596 you may modify it as you see fit you can get the custom pcb for the esp32 wth-01 at: https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/
Wydruk około 7,41 €–9,06 € nettoWstępna wycena jednego wariantu
It's a Mewtwo sculpt I made. No supports included, you'll have to do the slicing work yourself.
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing. 2023-09-29 - Fixed the 2x2x7u & 8u bins. There was some gaping on the bottom of the label. 2023-06-09 - Fixed the 1x3x6u, 7u, and 8u bins. The…
Original part : https://www.myminifactory.com/object/3d-print-mewtwo-figure-3d-165153#google_vignette
Here's my 'Mk2' Vertical Axis Wind Turbine (VAWT). I've always liked the lines of these, but they really caught my attention a few weeks ago when I realised that I couldn't explain how they work. I'm now a lot less confused about how a…
If you download the model, please don't forget to leave a like. Thank you! <3 Experience the power of one of the most legendary Pokémon with our low poly geometric Mewtwo 3D print file. This design transforms the iconic Mewtwo into a…
Round containers with a practical screw-on lid, available in 60x40, 70x40, 80x40, 90x40, and 100x40 sizes. Perfect for storing 3D spare parts, or small tools , keeping them neatly organized and securely sealed. Choose from a variety of…
Mewtwo and Mew scaled to 35mm, presupported files included
MEWTWO personagen da serie pokemom
Introducing the Sawtooth from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
Pre-cut for printing without support or in one piece.
For removing crank cap. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Category: Tools
A remix of Gargi's sith fury. Removed the interior and landing struts and fixed some of the geometry to reduce the need for supports inside the model. Supports on the build plate are still recommended. Makes a great addition to the X-Wing…
High Poly - https://social.thangs.com/m/337235 Category: Sculptures
🇬🇧 The OST is the low-cost, open source version of the commercial Smallest. A great way to discover the concept, but the version available on my shop offers better durability and more features. 🇫🇷 Cette version open source OST est la…
Update 9/26/23 - v2 is published! This includes updates to most major components. Instructions have been updated wherever any assembly would differ, though some of the instructional images still show parts from v1 if the assembly steps…
A friend wanted this for his workshop so we designed it better for what he needs. We used the space better by adding three sizes and some optional mounting holes. He also wanted the inverse of the cutouts. I will include the blender file…
Remixed version of Mewtwo. I didn't have AMS, so I split the parts into 2 and printed them separately.
Introducing the WT-01, the world's easiest wire EDM conversion! Designed for all desktop 3D printers, the WT-01 easily converts your FDM machine into a metal cutting powerhouse! Electrical discharge machining, or EDM, vaporizes any…
As I was installing a Stages crank arm on my Shimano 105 crankset I realized too late that I was missing the tool to remove and adjust the crank cap. I MacGyver'd my way through it but decided to make a tool should I ever need to adjust…
Star Wars Snowtrooper Bust Print instructions 5% Infill with supports
The purpose of this project is to create a low-cost, easy to build, yet high quality starter telescope suitable for beginners, which can be extended with accessories and improvements for more advanced stargazing. The goal is to lower the…
Kitcard for the Aerospool WT-9 Dynamic LSA , Fly Green Aviation edition. (F-GOOS)
Mounting is the Same as my other h2 mount https://www.printables.com/model/197289-biqu-h2-ender-5-plus-mount Nozzle to Probe -33,-11, Z should be same as stock mounts using 2 M3 x 8mm botls for the H2 and 2 M3x 8mm bolts (may want use a…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA PolyTerra Lavender Purple…
glowtide · planter modern minimalist planter design, elevated on a drip tray dimensions in mm: 100mm height version planter ~ x: 95 · y: 95 · z: 100 80mm height version planter ~ x: 75 · y: 75 · z: 80 photos show printed in matte and wood…
I wanted a decorative VAWT for the garden that will spin in the wind! I like this model , but removed the center part as it is not needed for decorative use. Will easily spin on a small metal or wooden stake (e.g., tent peg, chopstick). I…
A case for the WT32-ETH01 with a USB Type C trigger board for power. The top snaps into the body, no screw needed here. Also needed: 5 V USB Type C Trigger board, female, e.g. https://www.aliexpress.com/item/1005005995374256.html jumper…
I am including the F3D so you can scale the size of the inlay, but I made one small and one large that should cover most sizes of inlays.
Generative algorithms are fascinating, and differential line growth is no different. These coasters are procedurally generated using Houdini. If you want to know a bit more about this you can find my inspiration here , and you can see the…
This is a puzzle supposedly design by Isaac Newton. This puzzle is extremely hard to do correctly. Obviously, you can just take the tube out of the case. The real challenge of this puzzle is taking the tube out of the case without…
This is a case that I designed for WT32-ETH01 module. The case fits a WT32 module and a TP4056 Li-Ion charging module (without battery protection). This charging module is not actually needed here for charging since there is no battery in…
We needed to get rid of resin smell. Solution: growtent with ventilation setup. Prints without support on prusa xl
This Urban Green Energy HoYi model has been modified to be printable and mountable for display and experimentation. The model has been equipped with a 8.3mm mounting hole to smoothly accept a wooden 5/16 inch dowel. This model was…
Wanted to use my digital spool so I cut the holder from Macieksa's model and attached it to ThomaS's model. Nowhere near perfect as I am new to this. I also shortened the PFTE holder location. Just for my preference really. Uses a PC4-M10…
TL;DR Strong garden sieves to separate seeds by size. The sieves can be stacked. Start with wider ones on top and tighter ones down the stack. Collection https://www.printables.com/social/277533-yahbluez/collections/421843 How to use?…
Better than Shimanos official tool. 8mm hex wrench compatible for max torque (<1nm!!! for tightening)
✨ Mewtwo Figurine – Harness the Power of Pokémon! ✨ Unleash the might of one of the most iconic Pokémon with this Mewtwo figurine ! Designed with precision, this collectible perfectly captures Mewtwo’s sleek form, glowing eyes, and…
A small 60mm x 25mm screwtop container to protect your spare nozzles. Original structure based on eldonb46's excellent Parametric Screw Top Container - Style 2, Thingiverse https://www.thingiverse.com/thing:3803194 Container holds fifteen…
Wera Kraftform mit Shimano HollowTech Tool (TL-FC16) Entdecken Sie die innovative Lösung für das (De-)Montieren der Kunststoffmutter an HollowTech-Kurbeln - die perfekte Kombination aus dem Shimano TL-FC16 Tool und dem Wera Kraftform…
Screen to improve ventilation of the mini PC case. PETG. Layer 0.2. Infill doesn't matter.
A low poly version of Mewtwo! Supports are needed to print! Supports between the legs are recommended but not necessary.
This is a holder for a mini blowtorch to fit on an Ikea Skådis board. The tool faces you so as to occupy the minimum board real-estate. You will probably need to print with supports for the hook part. The hook exists as a stand-alone part…
This is a straight edged version of the Butterfly router template. I included the F3D file so you can scale it to whatever size you need. The inner butterflies of the template are included and are sized .1mm smaller for tolerance. Makes…
Trailer Hitch for 2in adapter and half-inch pin.
My version of the Shimano TL-FC16 Hollowtech II Crank Arm tool. I needed to install the preload cap bolt into my GRX 810 crankset and it didn't come with the necessary tool. This follows the internal ridge of the crank arm bolt allowing…
Simple bowtie holder for https://www.prusaprinters.org/cs/prints/45958-easy-bow-tie-5min-print-all-accessories-needed
A case for the WT32-ETH01 with a RS485 module and USB Type C trigger board for power. The top snaps into the body, no screw needed here. Also needed: TTL to RS485 Converter Module, e.g. https://www.aliexpress.com/item/32853794532.html 5 V…
This Helix Wind model has been modeled to be printable and mountable for display and experimentation. The model has been equipped with a 8.3mm mounting hole to smoothly accept a wooden 5/16 inch dowel. This model was developed to test…
This is a simplified version of mckgyver's preload adjuster tool for Shimano Hollowtech II cranks. While mckgyver did most of the work, I've made a few adjustments to make the model easier and quicker to print by removing the concave…
Through the following link you will get access to my Amazon Store Front, where you will find the shopping list for each project and other product recommendations. https://www.amazon.com/shop/adriancubas As an Amazon Associate, I earn from…
This is a set of blocks that can be used to recreate two different Snowtrooper figures at 500% scale. Trooper #1 was included with the AT-AT set published in 2003. Trooper #2 was included with the Millenium Falcon set published in 2004.…
This is a set of 2 router templates for a bowtie inlay or bowtie joint : 1 template to route the negative part of the inlay (bowtie_template_ech1_negatif) 1 template to route the bowtie itself : you still have to cut 2 tabs of the bowtie…
I was hoping to create a vawt generator for a school project.. Altho it works it needs realy high winds... so if anyone has a solution for small vawts to operate in lighter winds - please do speak up.. I am kinda proud that I managed to…
One of our exciting releases of a headphone or headset stand featuring a favourite Pokemon of ours.. This headphone stand comes in 2 parts, the actual stand with the figure and then the headphones holder to slide onto it and can be glued…
I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…
Base needs supports in order to print the zip tie holes correctly. I may post a model without them so no supports would be needed. I can easily change the angle of the screen, currently it is tilted back about 18degees. Just send me a…
DOWNLOAD THE V2 VERSIONS AS THIS HAS THICKER WALLS AND SHOULD AVOID ISSUES WITH PRINTING AROUND THE THREADED SECTION Big enough to hold the 1 days worth of the cocktail of drugs I need to take on a daily basis. No reason it can't be used…
Low poly 3D model of Mewtwo, the legendary psychic Pokémon. Ideal for animations, fan projects, or games.
Combine the ideal plant climber, no matter how tall / big / wide. Choose out of 33 basic pieces. Basic width = 60, 80, 100 or 120mm Create corners / square / triangle / hexagon supports. Label plants with the added signs (tip: you can add…
Details of eyes are extremely fine - recommended to print LARGE or to use fine diameter nozzle. Still working on slicing settings to achieve best final results.
A mirror cell for a six-inch Newtonian. It may be rescaled or adapted to metric - the user just needs to identify which hex-bolts will fit after scaling. Note the depicted backplate is not included, it needs serious revision to be…
The Leavitt LITE takes the original Leavitt by Novel Tinker and does a few different notable things : Use metric M4 screws & 12mm rods, this falls inline with a transition from the Hadley to Leavitt if you're coming from the official…
Airbrush holder specifically designed to hold the Gaahleri GHAC-Swallowtail airbrush. Airbrush easily slides into holder and is supported at the nozzle and a back pistol grip. The back support is clear of compressor hose. Mounting with…
Bring home the brilliance of one of history’s greatest minds with this stylized 3D printable bust of Sir Isaac Newton . Designed with smooth, sculptural forms and exaggerated features, this collectible model captures the essence of the…
I liked the render in the original so I separated it for printing.
I damaged the bolt on my Deore M5100-2 crankset and immediately discarded it. I needed a new one, so I took the original from a 105 RD-7000 crankset and modeled it, making adjustments for 3D printing. Unfortunately, bolts are generally…
I modified my bowties models so that the necklaces could be printed as well. (If you prefer a version with a ribbon, check my profile ;) ) One of the files is a pdf explaining how to print and assemble.
Differential Growth Organic Bowl. Made this in blender using the Differential Growth Add On (Free) GitHub - inca/blender-differential-growth: Blender Addon: Differential Growth Started with low poly cylinder selected top edges (after…
This design was inspired by something I saw on Pinterest awhile back, which was a “butterfly hinge” that looked vaguely similar to this. I wanted to make my own version in my own style, and also test out ‘Print-in-Place’ as a technique…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Cool 3d MODEL - POKEMON ACTION FIGURE MEWTOW MECHA DARK !!!! from the film#####mewtwo
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
One of my first personally designed 3D prints was a working fly reel. This is a version of that first model that I've fished successfully. Overall this prints in 7 pieces and you need a small o-ring (Harbor Freight) to hold the handle on.…
0.7, 1.8, & 2.5 mm spacers for Shimano Hollowtech II bottom brackets. The ones that came with my How I Designed This http://wheelsmfg.com/bottom-bracket-spacers.html I have my own spacers, but I used this website to make sure they were in…
Tool to remove the plastic cap on Shimano Hollowtech cranks. Fits onto a standard 3/8 socket set wrench. Designed as an adaptor for the Bike Measurement tool , but also useful on its own.
This is a Bow Tie for Engineers. The original was done by Etienne Gauvin at the link below. https://www.thingiverse.com/thing:3466379 I have always got great compliments at weddings and functions wearing this as it is very unique. I am…
WTF? This is An Air Pruning Pot! .stl has 170x170x170 volume. Please adjust the size as your plant! I tried 85~180mm. Those are well works!! And well printed on Prusa Mini+ Enjoy!!
Usefull printable tool for Shimano Hollowtech Bottom Brackets. Print in PETG for better durability. Features a 32mm Socket Adapter for easy use and better strenght.
