Liczymy pasujące modele…
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Link to @MaOI's model: https://www.printables.com/model/230901-mobile-phone-telescope-adapter I tried a few different phone mounts for my telescope (Apertura AD8 dobsonian), and couldn't get any of them to work well with my setup. The…
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale You need to print it in TPU, so it will stretch over the head.
I love loosing small things, that's why I often have to rebuy stuff. But not anymore since I got my printer… This model sits very tight onto the camera, so there is no way of loosing it again. Printing instructions -print it upside down…
This model is compatible with the lego system.
Eyepiece or Eyecup that fits Fujifilm X-T4 X-T3 X-T2 X-T1 XT4 XT3 XT2 XT1 X-H1 XH1 GFX100 GFX 50S Models. I made this design for my Fujifilm X-T1 but it should fit all the models listed above. It was printed with a 0.1 layer height on a…
Print it exactly the same as you would the original. Crosshair flat on the bed and no supports. PLA is fine.
A remix of Sven Brähmer ’s Telescope to Phone Adapter (Over-Engineered) . Sven's model is awesome, as it allows for fine tuning of each degree of freedom associated with attaching a phone to an eyepiece. I found that my phone shifted in…
Here's my Hex-Top Eyepiece Holder, the perfect solution for safely storing and organizing your telescope eyepieces. This 3D printed holder is designed with a hexagonal top, which prevents it from rolling off tables or other surfaces. The…
I created a variant of the eyepiece mount that can be secured to shorter eyepieces too. I liked the original design, but I could only use it with my 25 mm eyepiece. With the new design I was able to use my 10 and 6 mm eyepieces too. BOM…
Bending machine for making brass rings for telescope eyepiece holders. I have introduced an improvement in some of my adapters for 1.25 eyepieces to T2 thread, available here in PRINTABLES. (see:…
A simple eyepiece kit for 1.25" Eyepieces. Category: Sport & Outdoors
I think my Pen FT was dropped by a previous owner, breaking the viewfinder eyepiece where the cold shoe bracket mounts. Fortunately, 3D printing technology that the original designers never would've imagined allowed me to make a…
I was a bit annoyed with trying to fit my filters into my eyepieces case. Every filter seemed to come in a different box which meant they could either float around loose or I’d need to make multiple different sized holes in the foam. I…
This is a very useful tool to Collimate your telescope. You can add some tin foil to the diagonal to make it more visible. or paint it white. I just used glue stick and some aluminum foil. To get the Cheshire to print well. I added a…
Provides 3 inches of extra focuser back travel.
This is designed to mount to the Hadley 3D Printed Telescope: https://www.printables.com/model/224383-astronomical-telescope-hadley-an-easy-assembly-hig Even though I am using a tripod mount to secure the Hadley, I still use the included…
Needed a replacement eyepiece for my vintage Nikon FE film Camera, Can also fit other vintage Nikon cameras Printed out of TPU so it wont scratch any glasses. 30% Infill
3D printable eyepiece for Nikon cameras replacing the DK-17. I also included a 3D file of just the thread, which you can use as a base for your own custom eyepiece or cover design. Printing recommendations The thread on this part is tiny.…
These little eyepiece covers sit on top of your eyepieces, preventing dust from falling on them while idle. Print flat, so that warping is limited, and they should print with no problem.
Might also fit other cameras ? I printed this in TPU95A with the finest settings my printer allows, and it fit perfectly with a bit of a push+screw action when installing. I am also sharing the FreeCAD file in case you want to modify it.…
The original eyepiece on my Canon EOS 600D got a bit loose and kept sliding off. Since I still had the original and had no TPU available to print a flexible eyepiece myself, I opted to recreate the original so that the flexible gasket…
After getting annoyed with 1.25" Filters coming in a range of boxes, I thought it would also be sensible to make a similar pattern for the 2" filters. This was a bad idea as the bigger design didn't lend itself to the pattern. I got…
One of the most popular/visited reviews on our site is the JJC EC-6 Eyepiece Eg Extender . If you're not familiar with the eyepiece extender, it extends the eyecup 5/8" (15mm) from the camera body. This is useful for eyeglass wearers and…
This is an eyepiece adapter to use your Sony E-mount camera for astrophotography. Instructions I printed mine with black PLA, two walls, 20% infill. Tested with my friend's Sony A7 series. NOTE: The mount is supposed to be a snug fit to…
I lost the original one and a "new" one would cost too much for what i was paying for, so I decided to design one myself. Have fun and keep shooting film! Print Settings Printer: Prusa MK3S Rafts: No Supports: No Resolution: Adaptive…
Adapted from the excellent design of Jack Mason for Olympus OM10 SLR Eye Cup https://www.myminifactory.com/object/3d-print-olympus-om10-slr-eye-cup-60283 The hotshoe version also use the sony hotshoe design from Anatoly S.…
A telescope eyepiece adapter, in 0.965", 1.25", and 2.0" sizes. Simple! Source on OnShape . Also check out other telescope stuff .
Print these with a very soft filament like TPU. I used Ninjaflex. The Upper cap is wide and uses the rubber gasket from the eyepiece to hold into position. The lower cap has six small ribs to lightly hold onto the aluminum tube. They…
adp97's adapter had a lot of play, making the adapter fall out when lightly shaking my camera, as it didn't include the locking mechanism found on the lenses. I basically scaled the mode up by 1%, then added a flange with a hole in which…
I lost my last replacement nose piece for my Swissflex Eyephorics 2.5 Glasses. You know, the ones Jaime Hyneman wore on Mythbusters. Here is a good-fitting, comfortable replacement that I designed and printed on my Prusa i3 MK3S+ in…
Long cheshire with modular sight in 1.25 inch ! I advise you to print the main part with a white filament and the sight with a black filament.there are several crosses available and they all adapt via the screw system. The advantage if a…
A 1.25" cap for a telescope eyepiece. Print using a flexible material such as TPU.
CHECK OUT VERSION 2 IT'S TRULY UNIVERSAL AND WAY MORE ADJUSTABLE: https://cults3d.com/en/3d-model/gadget/universal-smartphone-eyepiece-adaptor-microscope-telescope-binoculars This is an adapter to attach any smartphone to any eyepiece.…
Standard telescope adapter from 2" to 1.25" with screw and optional cover piece for telescope protection. Can be printed in PETG, ABS, ASA. Screw should be printed little bit smaller (96-98% in X and Y) if you have problem with…
Needed something other than a small flimsy bag to hold the lunar filter for my telescope. The filter I designed this around is 31mm in diameter and 7mm high. I added the text to the top so that I could open it by feel in the dark.
Chest buckle designed for Thule Yepp Nexxt child bike seat
This is something I whipped up to go stargazing with a friend. It allows you to take pictures through the telescope with pretty much any Pentax camera that uses a K mount. Instructions I printed mine with black PLA, two walls, 20% infill…
Parametric Smartphone-to-Eyepiece Adapter Update 31 March 2018: Improved fillets on body near the clamp edges Update 26 March 2018: Camera lens can now be off-centre, fixed "misordered faces" problem in STL export, new lightening hole…
This is a case for telescope eyepieces. This should be big enough for most 1.25" eyepieces. The spiral thread will accommodate eyepieces ranging from 2-1/2" to 3-1/4" in overall length. There are no special requirements for printing.…
Simple 1.25 in telescope eyepiece filter cases with decent knurling for grip. Two versions are included - a ¼ turn variant and a threaded variant. The threaded variant uses 45 degree threads to make fdm printing easier. Print with .2mm…
2 wall .08 layer Height 15% infill PLA Has no locking screw but could be added. Also, the 1.25 in extension could be made longer as needed. Threaded fine with the metal scope piece. Using a 2.5mm drill, I drilled into the 1.25 section to…
I have few microscopes and many eyepieces. I was tired of having eyepieces lying around or in plastic bags. I designed a case that stores 2 eyepieces for biological microscope with diameter of 23,2mm. Usually for older Carl Zeiss Jena,…
It's really not Christmas without John McClane crawling through a ventilation duct at Nakatomi Plaza. The included photo is sized to 4"X6" to send to your local photo processor. The 3 images on the photo are 41.5mm X 81.5mm Shameless…
Eyeguards for microscope eyepiece with 32-32.5mm width. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Any TPU Any Notes: Supports are required If you have issues with…
This is an adapter for the raspberry pi camera (rev 1.3; you can get it for 3-4 USD on Aliexpress) and is used to put it on the eyepieces of any stereo microscope with 32-33mm diameter. It has spaces so as not to press on the…
Eyecup for Pentax DSLRs, fits perfectly on Pentax K-R. Snaps into the existing parts on the viewfinder when printed in TPU. I haven't tried in PLA, but will probably work with a little shimmying.
Are you annoyed when you switch eyepieces to take a closer look and have to adjust the Focuser every time, and sometimes lose your target? Try the Turret: set the focus for each eyepiece once and leave it be! Much easier, and more time to…
Case design to hold one 2-in eyepiece and four 1.25-in eyepieces. In my case, I have the Svbony 34mm 72° (2in), 20mm, 15mm, 9mm, and 6mm 68° eyepieces. The case is sloped to both support the taller 2-in eyepiece while also allowing easier…
Parametric Eyepiece Cap - updated to work with older OpenSCAD versions Can be printed with or without attachment ring. Parameters include: Diameter Height Thickness Roundness of Edges Ring Size Inner Taper (if any) Conical Chamfer of…
Fitting an eyepiece from a telescope on a camera lens creates a simple spotting scope. The hole is 1.25" which seems to be the most common size of eyepieces. I found that with this design the eyepiece gets a little bit to close to the…
This is a dust cap to protect the eyepiece when it is not in use. I had designed this for the Celestron 6se/8se telescopes but they should also work for other Celestron telescopes that have a 1.25" eyepiece.
A model of a replacement eyepiece for Canon 450D/ Rebel XSi (perhaps other models as well that are close to it?) Print it in flex. If you liked this thing enough (and was hopefully useful!), please consider supporting me via Paypal in…
Here is my version of the Cheshire eyepiece, in a 1.25" (31.75 mm) version. I split it in 4 parts, so i can 3D print all of them, in two colors. No glue needed. The crosshairs is replacable! this is so fragile, i wanted the eyepiece to be…
A remix of the Celestron telescope tray by Grouic. His tray works and fits great I just wanted one with some eyepiece holders. Print Settings Printer: Ender 6 Rafts: No Supports: No Resolution: .12 Infill: 40 Category: Hobby
I do some analog photography and I have glasses, that's why I made this. If you want me to do it for a camera that you own, please contact me. Print it with flexible filament. It can be easily installed and removed. No modifications on…
Just a simple box with a lid to keep my telescope eyepieces safe. Fits eyepieces size 1.25'' (approx 32 mm.) Printed mine in PLA, no need for support.
Onshape CAD link for those interested in making changes in the design: https://cad.onshape.com/documents/143c740f42cb21cc45906fdf/w/4bc4bac1614f8c690bb5c467/e/82f31ec3f743aeb42d9d5409 Changes, 19/5/26 - added file for old housing…
Note : This model has been updated. See: https://www.printables.com/model/1508496-adapter_125_eyepiece_to_t2-recapitulation-and-upda 1,25" eyepiece to T2 (M42x0.75) thread adapter. The T2 thread (M42x0.75) should be printed with a layer…
Replacement eyepiece cap for the bottom of 2 inch telescope eyepieces. STEP file included as well to modify the fit if needed. Fits snuggly on my GSO 30mm SuperView eyepiece. I would not try and print it in anything other than TPU, the…
The microscope eypiece cover serves not only as a dust cover but also plays an important role in preventing room light from reflecting back into the optical path. Since it is designed to be a bit larger and features a movable hinge, it…
Two eyepiece holders for 1.25" eyepieces for your Dobsonian telescopes. I made two different versions, one for my 6" scope and another for my 8" scope. These are very simple to print with no supports. Print Settings Printer Brand:…
this is an eyepiece for machinist pocket microscope, probably it fits various other equipment, scale it up as you like 1:1 scale drawing is on the photo so it is easily scalable within slicer software to match your needs, just do the…
Adjustable smartphone holder to place it in telescope eyepieces for astrophotography. I designed this support for smartphone, trying to make it as universal as possible. Possibly, it is an indispensable accessory to take advantage of the…
An adapter for Canon EOS camera the fits to the 1.25 inch eyepiece holder. The smaller variant has a radius of 1,25 inch. This is probably the variant of this adapter that would be the best option for a normal telescope. The larger…
Today, my Hadley 114 telescope welcomed four new eyepieces into its family. As I was reorganizing my drawer, I discovered that Gridfinity offers the best organizational solution so far. Inspired, I modified a parametric bin file to…
Easy to print and clips very securely into the front V of the mount. Holds three 1.25" eyepieces or barlows. The Ivan's mount one clips to the front of the metric version of Ivan's Sturdy mount The Hill mount one clips to the imperial…
Accommodates standard 1.25" telescope eyepieces up to 1.84" dia (46.8 mm) and 3 to 4.5" length (75-115mm). WIDER than the original model to fit eyepieces with wider bodies. TALLER (30mm additional usable) and MORE THREAD ENGAGEMENT than…
Printed without support. FLEX / layer 0.2 / perimeter 4x.
Hurt my eye and thought it'd be fun with a custom eyepatch. It was made for the right eye and tied with elastic bands.
I have a set of smaller eyepieces with diameter of 23.3mm and i want to use it inside my microscope with 30mm mounting. So i made these adapter.
According to kamerastore, an original Nikon 2925 fits the following camera models: Nikon F, F2 (w/ DE-1, DP-1, DP-2, DP-3, DP-11 & DP-12 finder), F3 (w/ DE-2 finder), Nikkormat, FM, FM2, FM2N, FM3A, FE, FE2 & FA Fujifilm X-Pro 1, GS645…
Does the Yepp shoulder strap keep falling down? Or is your child a break-out-champ? Don't you worry. Solution is here. I was feed up by the Yepp Harness straps which kept falling down. When my son learned himself to “wiggle” out of the…
Short cheshire with modular sight in 1.25 inch ! I advise you to print the main part with a white filament and the sight with a black filament.there are several crosses available and they all adapt via the screw system. The advantage if a…
I wanted a better solution for carrying my eyepieces outside when stargazing, so I put this together. Assembled using two m5 brass threaded inserts in the base of the handle threaded inserts: https://a.co/d/g9ERDd5
Update 1/1/2026 I received a request to try to smooth out some of the angular faces visible eyepiece. V2 STL is the result of my making the design a bit cleaner. I have not printed it, however it should be dimensionally the same as the…
I wanted to print this eyepiece holder but I figured that he original was created with metric hardware in mind. This version is optimized for that! Images when I got this design printed will follow.
This is a 1.25" telescope eyepiece plug/"cap". its designed to slide into the part of a telescope where an eyepiece normally goes to prevent dust from getting in. I printed with TPU, since I wanted it to be a rubbery feel (and harder to…
The standard eyepiece holder on most Dobsonians on the market are designed for the stock eyepieces that come shipped with the telescope. If you want to use better eyepieces, chances are you won't be able to fit them in the existing holder…
This is a simple set of cases for the eyepieces on our Swift 380T microscope. They are marked WF10X and WF25X. These have a nice cover that keeps the dust off when they are in storage for a long time. I don't have the sizes written in the…
A plug that you can use in place of a 1.25" eyepiece. Use this to prevent dust intrusion into your telescope during storage and transportation.
Easy to print finder eyecup with built in 22mm thread for Nikon DK-17M or Tenpa 1.22x/1.33x Magnifying eyepiece. It is also compatible with 22mm thread of KPS and SMDV 1.35x Magnifiers. I'm using 1.22x Tenpa magnifier on Nikon ZF to…
A simple 1.25 inch cap for eyepieces.
i never liked any of the eyepiece cases i saw online, so i made my own i designed it so it can fit even my largest eyepieces, at 4 inches long, and to hold each one securely so that they dont fall out and get damaged, even able to keep…
I provided a single stl file containing all 3 parts: The cap (suitable for both sizes) A small bottle case A large bottle case I exported directly from TinkerCad. I printed using OrcaSlicer. In Orca, it is easy to separate the individual…
I have M42 to Canon adapter from an old good times and I had realized that I can use it as a simple way to directly attach my EOS camera to a telescope. The project is an ad hoc realization of the idea. To protect CMOS matrix from dust I…
Meade ETX-70 eyepiece dust cover with string loop. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Category: Physics & Astronomy
Custom adapter to mount Magnifying Eyepiece on Fujifilm X-T30 camera and alike. With e.g. SMDV 1.33x magnifier it is making view larger than Fujifilm X-T5 or Nikon ZF (see pictures). Here's extended article on the ongoing effort and…
This Leica M10 eyepiece is attached to the camera body with glue so it's easy to lose and it's a very expensive rubber. So let print it at home. Print Settings Printer: East3D Gecko Rafts: No **Supports:** No Resolution: 0.125 **Infill:**…
If you are asking yourself what is that 3d printed microscope in the photos, it is this one . This adapter allows to attach a Micro 4/3 camera (tested with an OM-D E-M5 mkII) in place of the 23.2 mm eyepiece of the microscope. For best…
I designed these cover for the eyepieces in stereo microscopes aka Amscope and the such. Please print it with supports.
Cheshire eyepiece and collimation cap designed for 2 inch focusers for use without adapter. Printing and slicing Make sure that seam on the lower cylindric surface is in the prepared groove. Slicer should put it there by default.…
Eyepiece eye relief shield 29.4mm ID x 44.5mm long for Bausch & Lomb. Made in Tinkercad https://www.tinkercad.com/things/jqEopgpLtE5 This is a remix. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
This project was inspired by Jerry Oltion's article in the September 2020 issue of Sky & Telescope, p. 74. These are four eyepieces for an astronomical telescope made from lens sets available from Surplus Shed (surplusshed.com). These are…
Replacement for the original eyepiece cup for Celestron Skymaster telescope. If you damaged/lost the original ones, you can make these yourself from TPU/TPE. I printed mine with original FLEX PrusaSlicer settings (or you can just print it…
This is intended to cover a single eyepiece on the HDZero goggles. Print two for dust covers or print one to help with eye alignment issues, such as esophoria. Find the source files for this and my other designs in this repository:…
Can of course be used on anything similar, including monoculars and telescopes. May not fit yours, but the model can be scaled to suit. These caps fit an eyepiece outer diameter of 33.6mm (1.322835in)
A simple sunblocker for a microscope to block light coming from the side. The pictures are version 1, I will upload new ones soon. The microscope I use is a motic SMZ-168. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports:…
This print will hold the three eyepieces that come with the OneSky telescope. Try printing it in glow-in-the-dark! The holes in the hinges have been sized to fit a short piece of filament, so are no additional parts needed to complete the…
