1 / 4
Fanatec CSL Pedal Clutch Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mod for the CSL Clutch pedal using an RC Shock Absorber / Damper and 608 bearings
- Rating
- 4.667 / 5
- Likes
- 45
- Downloads
- 134
- Makes
- 4
- Views
- 1,927
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
When printing the base increase the wall count until there are no holes/infill between the bearing hole and edge. I used 35% gyroid infill.
When printing the arms use the orientation like in the 4th image and set wall count very high (effectively 100% infill).
You can use the replacement shock cap if you want a stiffer spring (pedal travel stays the same).
Parts required:
- 1x 140mm RC Shock Absorber
- 2x 608 ball bearings
- 2x M6 x 60mm bolts
- 1x M6 x 40mm bolt
- 5x M6 nuts
- 2x Large washer
- 6x Small washer
AliExpress links:
- 140mm RC Shock Absorber (1/8 scale rear shocks, don't order the front shocks by mistake, they are 120mm):
- Stiffer spring upgrade (Length: 90mm (2Pcs), Wire diameter: 2mm, Outer diameter: 24mm):
You can find CAD files in the downloads