Corsair TITAN 360 AIO Capswap – Shield and Blade Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Futuristic pump cap for TITAN AIO – shield + blade design with glowing ring.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Corsair TITAN 360 AIO Capswap – Shield and Blade Cap
This is my entry for the Corsair Challenge — a custom pump cap for the TITAN AIO, inspired by futuristic weapon cores and RGB-lit tech aesthetics. The design turns the cooler into a statement piece on your desk, combining bold geometry with glowing elements.
Construction:
The cap consists of three parts:
- Main disc – a circular shield with a ring designed to glow using the RGB lighting from the base cooler.
- Blade – fits into the front of the disc via a friction fit.
- Rear part – clips to the pump base; should be glued to the disc (e.g., with cyanoacrylate glue).
Lighting Effect:
To make the ring glow, change the filament at 4,6 mm and 5,8 mm layer heights. Between those, use a light-transmitting filament — such as translucent, milky, or pearl materials.
I used Fiberlogy Pearl PLA Silk, which worked great for this effect.
Additionally, the first 6 mm of the rear part should also be printed in the same light-transmitting material to let the RGB light pass through.
Printing Notes:
- Material: PLA is fine if the pump doesn’t exceed 60°C. If it does, use PET-G or a higher-temp filament.
- Supports: Use automatic supports for the disc.
- Layer height: 0.2 mm recommended.
- Brim: for the blade.
- Infill: 15% gyroid.
- Outlines: 3
Based on the official Corsair blank model.