1 / 6
Easy FPS Tuning --- Bungee Hooks Attachment -- Bulldog Nerf MEGA Blaster
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy FPS tuning --- attachment bar with hooks for a bungee cord --- no need to open the blaster
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 23
- Makes
- 1
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
FPS Tuning --- Bungee Hooks Attachment --- Nerf MEGA Bulldog Blaster
Easy FPS Tuning. No need to open the Blaster.
You need:
* bungee cord 3mm diameter (or thinner)
Only SLIGHTLY pre-tension the bungee to prevent the plunger rod from bending too much when primed. It's a long draw.
Use a 3mm bungee cord (or thinner) in order not to put too much strain on the plunger rod. It's only meant to provide slight support for the internal spring.
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
5 walls
7 top and bottom shell layers
20% gyroid infill