1 / 3
Rolling Spool Holder v2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool's companion.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 1
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Spool holder featured with V-slot wheels.
There are two parts for each side that needs to be assembled with bolts. 3 bolts are required per side. The only thing you'll need is a T10 sized torx screwdriver.
There is also a sample test, I suggest you to print this first before wasting time and material. Its purpose is for testing the clearance of the bolts, because I've modeled two kinds of clearance.
Bolt 1 : 0.15 mm clearance
Bolt 2 : 0.25 mm clearance
| Recommended settings | \_/ Ø 0.4 | |
| Layer height | 0.2 | |
| Perimeters | 2 | |
| Infill | 20% | |
| Bottom & Top | 5 | 5 |
| Supports | ||