1 / 4
DIY 100W USB-C Power Bank Case - 5x 18650 (5S1P), MYZL-YD24 board — image 1
1 / 4

DIY 100W USB-C Power Bank Case - 5x 18650 (5S1P), MYZL-YD24 board

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A compact two-part case for a 100 W DIY power bank built on the MYZL-YD24-V2.32 board and five 18650 cells in series.

Rating
0 / 5
Likes
9
Downloads
26
Makes
0
Views
170
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I built my own 100 W power bank around the popular MYZL-YD24-V2.32 board ("100W 5S Flash Charge Mobile Power Circuit Board") and designed this case for it.

The case is only 97 × 23 mm in footprint: five 18650 cells stand side by side in a single row, and the board sits under the lid, with openings for all four USB ports and the battery-level display.

Features

  • Fits the MYZL-YD24-V2.32 board: 2× USB-C (PD 3.1 / PPS, up to 100 W in and out), 2× USB-A (QC3.0 / SCP / AFC and more), digital percentage display

  • 5× 18650 cells in 5S1P (tested with Samsung INR18650-25R)

  • Two parts, printed without supports

  • Two-colour look: black body, orange lid (any colours work)

  • STEP files included, so it's easy to remix for your own board or cell count

Bill of materials

  • 1× MYZL-YD24-V2.32 power bank board

  • 5× 18650 Li-ion cells, identical model and charge level (I used Samsung INR18650-25R, 2500 mAh, 20 A)

  • 16 AWG wire for the main battery leads (the board needs ≥10 A on the battery side) + thin wire for the balance leads

  • Kapton tape, insulating paper rings for the cell ends, a thin foam pad between the cells and the board

  • No screws or glue: the lid is a press fit

Assembly

  1. Place the five cells side by side and connect them in series (5S). I soldered the connections directly to the cells and insulated everything with Kapton tape and paper rings. Spot-welded nickel strip is the safer option if you have a welder — soldering heats the cells, so keep it fast and use a powerful iron.

  2. Solder the main B+ / B− leads (16 AWG) and the balance leads to the board exactly as shown in the board's wiring diagram — the board will not start without the balance leads.

  3. Put a thin foam pad on top of the cells, slide the pack into the case and place the board on top.

  4. Press the lid on. The openings line up with the 4 USB ports and the board's button; the display shows through the window in the case.

Capacity

5S1P of 2500 mAh cells ≈ 18.5 V × 2.5 Ah ≈ 46 Wh (roughly 12 500 mAh at 3.7 V).

Safety

Li-ion cells store a lot of energy. Use only matched, healthy cells, never short them, and don't leave the power bank charging unattended until you have tested it. ABS is recommended over PLA: the cells and the board get warm at 100 W.

Print settings

  • Printer: QIDI Q1 Pro, nozzle 0.4 mm

  • Material: ABS (black case, orange lid)

  • Layer height: 0.14 mm (first layer 0.2 mm)

  • Walls: 3, top/bottom layers: 6

  • Infill: 20 % adaptive cubic

  • Supports: none, brim: none

  • Orientation: as in the files — case upright with the open side up, lid flat

Files

  • Case.stl, Lid.stl — ready to print, already oriented

  • Case.step, Lid.step — for remixing

  • Orca project (Qidi Q1 Pro).3mf — my OrcaSlicer project with the exact settings

Credits

The port and button cut-outs are based on 100W Power Bank 4S 18650 Double C Port by @Alexeyvik — thanks!

Tags