WMF Quality One lid handle repair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement ring and flange for a broken WMF Quality One lid handle. Uses an M5 insert and M5 worm screw.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The lid of my WMF Quality One pot fell to the floor, and the main plastic parts of the handle broke. Since I didn’t want to throw away an otherwise perfectly good lid, I reverse engineered the missing parts and designed replacements.
What’s included
Ring
Flange piece (with a pocket for an M5 brass insert)
What you need
1× M5 brass insert (installed in the flange piece)
1× M5 grub screw, 14 mm long
Print settings
Printer: Prusa MK4S
Material: [PETG / ASA: heat resistance matters near a hot pot lid]
Layer height: variable layer height (auto mode)
Infill: 15%
Perimeters: at least 4, because the screw sits inside the lid and puts load on the part
Supports: yes
Notes
Check the fit against your own lid before printing, as dimensions may vary between production years.
The handle sits close to a hot lid, so use a material with sufficient heat resistance.
This is not an official WMF part, and the model is not affiliated with WMF. Use at your own risk.