1 / 7
Prusa-Meter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Do you want to know how much Prusament is REALLY left? Here is a mathematically accurate remaining Prusament indicator.
- Rating
- 4.774 / 5
- Likes
- 122
- Downloads
- 366
- Makes
- 40
- Views
- 1,648
- Reviews
- 31
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Takes less than 20 minutes to print! Make sure to insert into the right hexagons!
Recommended settings:
- Material: PLA
- Supports: None
- Nozzle: 0.4 mm or less
- Layer height: 0.15 mm or less
- Infill: 50-100%
Features:
- Snaps in easily
- Does not obstruct spool rotation
- Quick to print with little material needed
- Convenient
- Reusable
- Size: ~58x24x4 mm
p.s. This gauge technically works to determine how much filament is left on any spool with a starting filament diameter D = 180 mm and ending D = 100 mm.