Prusa i3 MK LED Panel Light ClipOn Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Why not make a couple of lamps for my Prusa 3D printer?
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Why not make a couple of lamps for my Prusa 3D printer?
eBay has some great cheap 12V 4W LED panels for car interior lights (Search: 48 SMD COB Panel LED T10 Car 12V)
I decided to make a design based on the earlier designed ClipOn system for the main Prusa frame.
As the LED panel get very hot when used directly on 12V, there have to be a good ventilation grid for cooling.
Design challenge:
- All plastic and easy to print (no screws, etc...)
- As few parts as possible
- Little to no post-processing of finished printed parts (edges, holes, etc.)
- Wires should be integrated in the solution
- Light should be adjustable (direction)
Fits all Prusa i3 MK frames.
Note for MK3: MK3/s/+ uses 24V, therefore you have to use LED panels for 24V or connect two lamps with 12V LED panels in series.
>> If you like it, please leave a like, a rating or maybe a donation :)
Print instructions
Layer: 0.20mm
Infill: 25% Rectlinear
3 top an bottom layers, 2 perimeters. 0.4mm default tip.
As the lamp get hot, ABS or PETG is best suited materials.
See photos for assembly.