Counting matching models…
These creepy hands are nice decoration when on the base. When attached to the handles, they can be used at Halloween, in cosplay, and also make good back scratchers! If you like these cool, err I mean creepy hands, check out this dice…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
EDIT 5Oct2026: Changed License. And my repair with PETG from 2022 is still holding! Edit Feb 2025: I added another handle piece that is 4mm shorter and .2mm larger diameter hole for the wire. This is intended for better fit on buckets…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for PETGSource material: PET
V2 has a larger and heavier base so the handy photo holder is less likely to tip. The thumb will now bend the photo just a bit so it is held more secure. The chamfer is removed from the base. This means you have more room to emboss text.…
Print approx. €6.06–€7.41 excl. taxPreliminary estimate for one variant
So you have a Bonsai tree and have added a little fisherman figurine for decoration. Now you need to make your fisherman happy by giving him a pond to fish! This is designed as a 2-color print. I used Prusament PETG—ultramarine blue for…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for PETGSource material: PET
This is a set of decorations for your Master Cooler QUBE 500 computer case. You can have RGB LED lights bouncing with the music, or single color LED lights glowing in the lightning bolt. These items will give your PC a cool and…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
The file is oriented as I have printed. Supports are required. I hope you download and like ❤ this model! Post your makes! If you love 😍💖🥰 this model, Please consider leaving a tip for the original creator! 💖 Happy Printing!
Supports required. See image of sliced mask. The photo shows 0.2mm layer height. I hope you like ❤❤ this model! Happy Printing!! 🎉
This clamp will hold a table cloth in place. Tie a knot in two trash bags and hang them in the slot for recyclables and rubbish. Or use the slot as a place for dish clothes (they may also need a knot). Tie rope or paracord for one end of…
This model uses a scan of the sculpture “Hand of the Genius of Liberty, La Marseillaise”, which can be found here: https://www.myminifactory.com/object/3d-print-hand-of-the-genius-of-liberty-la-marseillaise-143732 Like this design? Then…
Big Back Scratcher gets that itch as good as shag bark hickory! Be careful. This is not a toy. Don’t let young children play with it. Seriously. This model has a few parts. The 3 finger, 2 thumb hand; “stick” for the arm; and end cap for…
You probably want supports under the base and to support the top of the handle. No supports inside! Photos show Prusament PETG Ultramarine Blue. There are baffles to reduce spillage. One fill is usually enough for my Bonsai. It takes more…
Easy print tool to add to your sewing toolbox. Print with 3 perimeters for strength. The point can have an issue with warpage, so best to add a brim. Thanks @Tiffi226! I hope you like ❤ my model and will post your makes! Happy printing!
The wall thickness is only 2mm, so this model is not intended to hold liquids. Supports required I hope you like ❤❤ this model! Happy Printing!! 🎉🎉
EDIT 26Sept2026: A similar one color model requires no supports: https://www.printables.com/model/1847880-cosplay-in-loving-memory-urn-with-screw-on-lid-v2 This urn was designed with cosplay in mind, not the ashes of a loved one. The wall…
EDIT: I added another model with a larger hand and chute. This original hole is about 30mm, and the Large version is almost 40mm. I kept this model as a single piece, accepting the trade off of more supports for no glue. This model is…
This model has two pieces used to make melon patch designs for quilting. Mark the outer perimeter for a cut line on your fabric and a ¼ inch seam allowance dashed line for sewing. This template helps keep your melon patches uniform.…
I thought rad2905’s cute Nutty Buddy could use a friend, a Bolt Buddy. Two buddies, one nut and one bolt with articulated legs to sit on a shelf. The Bolt Buddy needs support under the threads at the bottom. I used a little support on the…
There is a twin model of this that has a secret compartment: https://www.printables.com/model/1000055-david-with-a-hidden-compartment This model is suitable to have a different color for the base and the sculpture, changing filament at…
You can change filament at layer for different colored Mustang and background. MMU/AMS not required. I hope you enjoy the model! Comments📖, likes❤, ratings🤩 encouraged! EDIT 5Oct2026: Changed License
There is a twin model that does not have a hidden compartment: https://www.printables.com/model/989143-david You will need to add supports on the head. I let PrusaSlicer figure out where they needed to be and used organic type supports.…
This model is a set of five templates to help you with fussy cut quilt blocks. They range from 2 inch to 6 inch finished size with ¼ inch seam allowance. Blocks are cut at 2 ½ inch to 6 ½ inch square. The templates are embossed with text…
This funnel reduces spillage of desiccant. Easy to add silica gel beads to the spool container. Easy to pour out of the spool container with good control. STL is oriented correct for printing, top down to the build plate. No supports are…
Nat has a great design. I wanted to hold it up! This short pedestal gives the big Octahedroflake-6_[Echo] a place to live! It fits nicely. Find Nat’s Octahedroflake-6 [Echo] here:…
This quilt template gives you a B-Fan pattern to put onto you hand stitched quilt. Alignment holes to use when moving the template. Enjoy! EDIT 5Oct2026: Changed License
85mm inner diameter. 60 mm deep. You can scale bigger without issue. If you scale smaller the threads could jam up. Supports are not needed.
You have probably seen this technology in fountains, where the water arcs perfectly as a smooth column. Now you can play with the same laminar flow of water with this nozzle! Insert a standard washer and screw this nozzle on a standard ¾…
This is a display stand for 50mm mineral/rock spheres. You will need to glue the two pieces together.
I thought this little droid would look cool in color! I scaled my print down to be 100mm tall. I would strongly recommend to not go smaller than this, and if you have the time and filament to go larger. The colors I used: 1. Black 2. Grey…
This model does not require MMU. You can change filament at the top of the base 17mm to color the snake different than the base. Supports are needed beneath the snake’s head. I hope you download ⬇ and like ❤ this model. If you do, please…
Hold book open one handed. I hope you like ❤❤ this model! Happy Printing!! 🎉🎉 EDIT 5Oct2026: Changed License
These hooks snap onto wire shelving. The shelving has ¼ inch (6.35mm) wires spaced 1 inch (25.4mm). They are fine on zinc plated, chrome plated, stainless steel; but not OK on rubber coated shelves. The smaller hook works well to hold…
The base of the model is convenient for a color change. If you print this, make sure you have dry filament, as this model, like most Voronoi models can be stringy.; The gcode has a color change and a little organic support on the index…
Easy print! Easter egg screws together with space inside for a surprise. Print at 0.2 or less layer height. Photos are model printed at 0.1 layer height to make the ends of the egg look better. I printed one in yellow and another in green…
No supports. Screw has 0.2 tolerance so should work with most printers. Don’t scale smaller or the threads may jam. I hope you like❤ this model! Happy Printing!!
This model is sturdy enough to stand up child‘s play. There is plenty of room to emboss some text within PrusaSlicer. In the photos, you will see POKÉMON embossed into the lid. STLs are oriented (big face down on plate), no supports needed.
Easy print! I hope you like ❤ this design! Happy Printing!
I designed this to make the task of getting nuts ready to embed into my 3D prints easier and quicker. I was tired of going to my big tub of fasteners to get a small number of nuts while I was printing. Generally I use M2.5, M3, M4, or M5…
This quilt template gives you a Dresden Flower pattern to put onto you hand stitched quilt. Enjoy! EDIT 5Oct2026: Changed License
85mm inner diameter. You can scale bigger without issue. If you scale smaller the threads could jam up. Supports are not needed.
There are 14 elements in this mask that can be easily colored. When you choose your colors, you can use the same color for a feature as the face, like if you just wanted to have only a colored nose, or no eyebrows. In addition to easy MMU…
This base fits the leaning tower of Pisa created by @MiniWorld3D found here: https://www.printables.com/model/261584-leaning-tower-of-pisa-italy
Edit Jan 9, 2026: After 2 years service, the PETG model was quite warped. I made a new design and printed with PC-CF When you slice the box, put a pause at 18.60mm to bury 2xM3 hex nuts. You will also need supports under the feet (not…
This model is a Kubaton style key holder. It can be useful in self-defense. It is big enough so you will know where your keys are. Styled after the original. The text can be personalized in PrusaSlicer. As it is on a round surface I left…
I hope you like ❤ this remix. If you do, please also like ❤ the original! Happy Printing!! 🎉
This Splat Embroidery Floss Winder is a great way to organize floss and keep it from becoming tangled. It is a quick and easy print! This is a go-to print for end of filament spool… Works just fine if there are 2 colors ;-) Most any types…
This bowl is great way to keep your pins! They won’t spill out even when turned upside down, yet doesn’t hold them too strongly to make it a nuisance! As long as you drop or toss them in the top, they are contained! There is a thread…
This Hand Saver Bag Carrier works great! When you have one or more bags to carry by the handles just put those handles into the slot and carry with comfort! This model is an easy print, does not need supports , and one you’ll be glad you…
This model looks great in multi color. The gcode files have the color change built in. The minimal supports come off pretty easy. The 3mf file has print settings to achieve hexagonal second color. <<—Load as a “PROJECT”. If you like this…
This vase is designed to hold water. Please see Jakub Kočí‘s article for details how to print: https://blog.prusa3d.com/watertight-3d-printing-pt1-vases-cups-and-other-open-models_48949/ No supports are needed. I hope you like ❤❤ this…
This keychain needs two key rings. The swivel on the keychain will allow your keys to rest in a “natural” position. When in your pocket, it seems like less bulk. This print-in-place keychain swivel is ready for custom text in PrusaSlicer.…
This baseball mount is a simple shape with a surface ready for text. Personalize it with text in PrusaSlicer! Like this design? Then "like" this design! ❤, and if you print it, post your make! ❤
Yet One more Airless Ball! Pre painted supports just on the bottom of the 3mf file. I hope you like ❤ this model. Happy Printing!
Let gravity help you get the lotion at the bottom of a Cetaphil bottle! No supports needed.
This model is used to bend the PTFE tube coming out of the MMU3. It is useful when the printer and MMU are in an enclosure and the PTFE tube hits the ceiling when printing “tall” models. No supports needed.
This dock lets you have it your way. You can change the viewing angle and lock it in place. If you are using it on your nightstand you can easily rotate the phone to a 90° angle. Watching a video at the kitchen table you might be at 70°…
Slicer said “add supports”. It printed fine with no supports. 😉
There is a more current version of this: https://www.printables.com/model/1810857-eye-drops-bottles-holders-v2 These holders were designed for prescription eye drops. There are different configurations, most handling 10ml vials (~25mm…
This handy solder holder helps hold the solder filament above the piece you are soldering so it is easy to put more on the tip of your soldering iron. It can hold two - ¼ pound spools of solder, and has holes to feed solder and keep it…
The top lip of the hole is a wee bit tight. I used a deburring tool to make it not so tight. I hope you like ❤ this base, and please also like❤ the original! Happy Printing! Ka-Kaw
Requires 2- M3x30 screws and square nuts.
This model was designed to hold desiccant bags for drying. There are dividers in the basket to provide space for air flow. The feet snap in place. I printed PETG in order to use in my filament dryer.
This is similar to my earlier model, https://www.printables.com/model/639509-knurled-knob-mk4xl-remix This model is a total new design. Compared to the above, this one has a larger diameter and a deeper concave. My preferred way of…
Shungite stones are beautiful on their own, but why not display them with a stand? This is made for three 50mm spheres of Shungite. Other gem stones would look good on the stand as well.
Add more details, like name and dates with your slicer program if desired. This vase is designed to hold water. Please see Jakub Kočí's article for details how to print:…
I used supports to make the contact surfaces of the latch as good as possible. See screenshot of slicer. These supports are for a pretty small overhang. You might not want them. Consider adding text in your slicer to emboss a label on the…
This Möbius cube is designed so you can follow along a surface and after tracing it all, you get back to where you started! 😎 There are 4 sizes: 25, 50, 100 and 150 mm cubes. The 150 size has a base for displaying this sculpture. I used…
The original is nice. I couldn’t see using it as a keychain though. Added quick print handlebars to give it more 3D look. :-) I hope you like ❤ this design! If you do, please make sure to like ❤ the original as well! Happy Printing!
Edit Jan 9, 2026: After 2 years service, the PETG model was quite warped. I reprinted with PC-CF. Edit Sept 16, 2024: Added Unified model for large format printers. This is a sturdy shelf for the PrintDry Filament Dryer PRO3 intended to…
There are 2 versions. The 3MF project file for MMU; and a pair of STLs for a print and glue model. If you choose the print and glue version, consider printing the maze piece in 2 colors with a layer color change. I really like Two Views…
This model gives an easy way to carry phlebotomy tubes from the field to the lab, and keeps the tubes organized in the lab for analysis. Each carrier box can hold 52 standard 13 mm tubes, either 100mm or 75mm long. There are no supports…
There are 4 colors: (you can change the color slots, here is what I used) 1 - black (dolphin eyes) 2 - grey (dolphin body) 4 - blue (wave/base) 5 - white (white cap on wave) I hope you like ❤❤ this colored model! Happy Printing!! 🎉🎉
These feet attach to the 30x30 extrusion and are held in place with M6 x 10mm hex head cap screws. The vibration dampening is done by these 1 ½ inch Vibration Isolation Washer Rubber Isolation Pads:…
The screw pattern piece is disposable; it just makes marking where the screws go in the wall a little easier. I hope you like ❤❤ this model! Happy Printing!! 🎉🎉
Some supports are needed. See the 3mf file for painted on supports. Make sure the Arduino is parallel to the front when putting it in the box. If it is tilted it won’t fit properly. The pin headers should slide into the slots. When…
Supports needed on the upper Benchy. Use the 3mf file if you are printing 2 color with MMU. I hope you like ❤. Happy Printing!! 🎉
I really like the elephant piggy bank. Nice curves! Had a problem with the Klein model that the screw in cap was too large. I could scale it to fit but then it could get screwed too far and fall into the elephant. This model fits well and…
Pontoon Raft Tub Toy This tub toy is a Pontoon raft with corner posts held on by magnets. Great for ring toss, or knock the post into the tub. I suggest making two pairs of posts and rings, with each pair a different color. Recommended…
When your arms are full carrying stuff, you can still have your keys close at hand and not worry about dropping them. All rounded edges. Fits good in pocket. Hangs on hook. The .3mf file has 4 sizes of this model. The inner diameters are…
This model is for personal use only. No commercial use. The Smithsonian was quite specific about that. Copied from the Smithsonian Institution Panamanian American relief pitcher Mariano Rivera played 17 seasons for the New York Yankees…
Entry for consideration for 3DPI Trophy “Long Twisted Journey to Big Pearl” Happy Printing!! 🎉
Fan housing. Extra USB cable tucks into compartment.
Photo is of PLA model printed at 0.15mm layer height. No supports. Default settings worked fine. I hope you enjoy the model! Comments📖, likes❤, ratings🤩 encouraged!
Inspired by Benoist Van Borren’s beautiful concrete sculpture. This model is close to the same size as the original. https://www.saatchiart.com/art/Sculpture-Moebius-cube/661148/2733271/view Includes a base for en pointe display. You will…
The Yin and the Yang are both printed from the same file. There is a small tab that will align to a small slot. You will need to print it twice in different colors. Add supports! The tab needs supports. I also used supports in the slot.…
Oh no! Spidey is enveloped by Voron’s disabling energy web!! But wait, it looks like he is managing an escape! Whew!!! That was close, Spider-Man. Too close. Good thing Peter Parker managed to get a 3D hologram just as you broke that…
This vase is similar to https://www.printables.com/model/1261968-ribbed-vase , but made for vase mode (spiral) printing. It is thinner and more light weight Ribbed Vase than the one in the above link. The second picture shows this vase…
Simple spool to wind binding for quilt. Center of spool is 1.3” (33 mm) wide. Intended to handle binding up to 2 ½ inches wide folded once. Almost any filament, no supports. I hope you download ⬇ and like ❤ this model! Happy Printing!! 🎉
The STL is for single extruder and you will need to specify to change filament twice at the appropriate layer heights. The 3MF Project file is for MMU printing. I hope you like ❤ this model! Happy Printing!! 🎉
Simple sign and base to help promote Printables! Print this and a QR code to your own models page to help people find your models and hundreds of thousands more! The info sign needs a color change at 2.2mm Happy printing!
Entry for consideration for 3DPI Trophy. ”Gears and Diamond” Connected SLS Gears, supporting an MBJ Diamond, showcase the ever-evolving technology. This entry is just the printed parts, but I thought I’d include a wood base in one of the…
Print as oriented. No supports The Command strip version is sized for 2x - medium command strips. I hope you like ❤❤ these models!! Happy Printing!!
Similar to my #2 entry. I added a base to the model. Entry for consideration for 3DPI Trophy. ”Gears and Diamond with a Base” Connected SLS Gears, supporting an MBJ Diamond, showcase the ever-evolving technology.
This model is designed to slice through tape on packages and parcels. It uses the same working end at its “little brother”: https://www.printables.com/model/1822226-box-opener-serrated It is an easy print where “quality” slicer setting is…
Supports are needed under the tail, torso and nose. You can see my painted on supports in the PROJECT file. No supports inside the horse. I had a couple failed prints. The tail didn’t have enough supports when I treated it like a “normal…
I used minimal supports only on the bottom of the model. See photo.
Even with decent settings: 4 walls, 0.15mm layer, it uses less than 1 meter! As far as box openers go, this one doesn’t break as quick with regular PLA. “Tough” filaments are better. This model has a "big brother" version here:…
Entry for consideration for 3DPI Trophy. "Lattice, Gears and Diamond with a Base" SLS Lattice Strength Connecting Gears, supporting an MBJ Diamond, showcase excellence in engineering and 3D printing technology.
After printing Peter’s Laugh Emoji, it decided to become a Rolling on the Floor with Laughter Emoji! So I made a little resting spot for it. :-) If you scale and print the Laugh Emoji, scale this the same amount. I hope you like ❤ this…
Wimpy! Should the small version be called Wimpy Wimpy?!? This model is 1.8mm thick. Print with 0.2 layer height, and change color for the last layer. There is only one layer of the Wimpy, so it works better to be a dark color with a light…
![Pedestal for Nat’s Octahedroflake-6_[Echo]](https://media.printables.com/media/prints/602630/images/4794838_924c7de1-25c5-4e26-bf72-af1d9a52b59c_22dffeb0-8750-4c8f-86db-a3b1404ec66e/img_0550.jpeg)
